G-CSF promotes the development of hepatocellular carcinoma by activating the PI3K/AKT/mTOR pathway in TAM.

OBJECTIVE: This investigation seeks to elucidate the role of the Granulocyte Colony-Stimulating Factor (G-CSF) in the progression of hepatocellular carcinoma (HCC), as well as the impact of the substance on related signaling pathways within the disease matrix. METHODS: Nude mouse tumor-bearing assay was used to detect tumor progression. Levels of Mannose/CD68 and CD34/Mannose within these samples and the concentrations of Mannose and inducible Nitric Oxide Synthase (iNOS) in macrophages were quantified using immunofluorescence techniques. The angiogenic capability was assessed via tube formation assays, and protein expressions of G-CSF, Vascular Endothelial Growth Factor (VEGF), Transforming Growth Factor-beta (TGF-ß), Matrix Metalloproteinases 2 and 9 (MMP2/9), SH2-containing protein tyrosine phosphatase-2 (SHP-2), phosphorylated PI3K/total PI3K (P-PI3K/t-PI3K), phosphorylated AKT/total AKT (P-AKT/t-AKT), and phosphorylated mTOR/total mTOR (P-mTOR/t-mTOR) were measured through Western Blot analysis in both tumor tissues and macrophages. RESULTS: Administration of G-CSF resulted in a marked augmentation of tumor volume. Macrophage Mannose expression was significantly elevated upon G-CSF treatment, while iNOS levels were conspicuously diminished. G-CSF substantially enhanced the secretion of VEGF, TGF-ß, and MMPs in tumor tissues. Macrophage parameters, following incubation in G-CSF pre-treated conditioned medium, indicated enhanced tube-forming capabilities relative to the control, an effect mitigated by the introduction of specific inhibitors. Furthermore, the G-CSF group exhibited a notable reduction in SHP-2 expression, alongside a substantial elevation in the phosphorylation levels of the PI3K/AKT/mTOR pathway proteins across all tumor-bearing paradigms. CONCLUSION: G-CSF ostensibly facilitates the advancement of hepatocellular carcinoma by activating the PI3K/AKT/mTOR signaling cascade within Tumor-Associated Macrophages (TAM).

Preparation of a Highly Flame-Retardant Urea-Formaldehyde Resin and Flame Retardance Mechanism.

Urea-formaldehyde (UF) resin is the most widely used adhesive resin. However, it is necessary to improve its flame-retardant performance to expand its applications. In this study, exploiting electrostatic interactions, anionic phytic acid and cationic chitosan were combined to form a bio-based intumescent flame-retardant, denoted phytic acid-chitosan polyelectrolyte (PCS). The molecular structure of the urea-formaldehyde resin was optimized by crosslinking with melamine and plasticizing with polyvinyl alcohol-124. Thus, by combining PCS with the urea-formaldehyde resin and with ammonium polyphosphate and ammonium chloride as composite curing agents, flame-retardant urea-formaldehyde resins (FRUFs) were prepared. Compared to traditional UF resin, FRUF showed excellent flame retardancy and not only reached the UL-94 V-0 level, but the limit of oxygen index was also as high as 36%. Compared to those of UF, the total heat release and peak heat release rate of FRUF decreased by 86.44% and 81.13%, respectively. The high flame retardancy of FRUF originates from the combination of oxygen and heat isolation by the dense carbon layer, quenching of phosphorus free radicals, and dilution of oxygen by a non-flammable gas. In addition, the mechanical properties of the FRUF remained good, even after modification. The findings of this study provide a reference for the flame-retardant application of FRUF for applications in multiple fields.

Synergistic upregulation of PD­L1 in tumor cells and CD39 in tumor­infiltrating CD8+ T cells leads to poor prognosis in patients with hepatocellular carcinoma.

The immune escape of tumor cells and functional status of tumor-infiltrating T cells may serve pivotal roles in the tumor immune microenvironment and progression of hepatocellular carcinoma (HCC). The present study enrolled 91 patients with HCC and examined programmed cell death ligand 1 (PD-L1) expression in tumor cells and CD39 expression in tumor-infiltrating CD8+ T cells in patient samples using multiplex immunofluorescence assays. The impact of PD-L1 and CD39 expression levels on the prognosis of patients with HCC was investigated utilizing Kaplan-Meier analyses. The individual upregulation of PD-L1 in tumor cells, as well as the individual upregulation of CD39 expression in tumor-infiltrating CD8+ T cells did not significantly affect the prognosis of patients with HCC. However, the simultaneous upregulation of both PD-L1 in tumor cells and CD39 in tumor-infiltrating CD8+ T cells was associated with reduced overall survival in patients with HCC. Therefore, the results of the present study suggested that the interplay between tumor cell immune escape and tumor-infiltrating immune cell functional status within the tumor immune microenvironment may have had a substantial impact on the prognosis of patients with HCC. Mechanistically, increased expression levels of PD-L1 in tumor cells may improve the immune escape capacity of tumors, whilst upregulation of CD39 in tumor-infiltrating T cells may be associated with T cell exhaustion. Therefore, the upregulation of PD-L1 expression in tumor cells, in conjunction with the exhaustion of tumor-infiltrating CD8+ T cells, could serve as a future potential prognostic indicator of patients with HCC.

Preparation of a Flame-Retardant Curing Agent Based on Phytic Acid-Melamine Ion Crosslinking and Its Application in Wood Coatings.

To broaden the applications of wood, it is necessary to prepare flame-retardant coatings that can protect wood substrates during combustion. In this study, a bio-based, intumescent, flame-retardant phytic acid-melamine polyelectrolyte (PM) was prepared using phosphorus-rich biomass phytic acid and nitrogen-rich melamine as raw materials through an ion crosslinking reaction. Subsequently, a series of bio-based, flame-retardant wood coatings were prepared by optimizing the structure of urea-formaldehyde resin with the addition of melamine, sodium lignosulfonate, and PM as a flame-retardant curing agent. Woods coated with PM-containing coatings displayed significantly improved flame-retardant performances in comparison to uncoated woods. For PM-cured woods, the measured values of total heat release and total smoke production were 91.51% and 57.80% lower, respectively, compared with those of uncoated wood. Furthermore, the fire growth index decreased by 97.32%, indicating a lower fire hazard. This increase in flame retardancy and smoke suppression performance is due to the dense expanded carbon layer formed during the combustion of the coating, which isolates oxygen and heat. In addition, the mechanical properties of the flame-retardant coatings cured with PM are similar to those cured with a commercial curing agent, NH4Cl. In addition, the prepared flame-retardant coating can also stain the wood. This study proves the excellent flame-retarding and curing effect of ammonium phytate in urea-formaldehyde resin coatings and provides a new approach for the application of bio-based flame retardants in wood coatings.

Investigation on pretreatment method for the determination of rare earth elements in polymetallic mineral samples in Pan-Xi region by ICP-MS.

The polymetallic mineral samples in Pan-Xi region are rich in rare earth resources, and exploring an efficient and accurate analysis method is of great significance for their comprehensive utilization. In this study, the samples were decomposed by three methods, namely closed acid dissolution, open acid dissolution with five acid and alkali fusion with sodium peroxide, and the 15 REE were determined by inductively coupled plasma mass spectrometry (ICP-MS) with Rh and Re as internal standard correction elements. The comparative experiments were conducted using standard substances, and the results showed: (1) The detection limit of closed acid dissolution method was low with relative standard deviation (RSD) ranging from 2.51% to 9.56% and the accuracy of method (ΔlgC) ranging from 0.006 to 0.073, while the sample processing was long, and the results of some REE were low. (2) The RSD of open acid dissolution with five acid method ranged from 1.93% to 7.96%, and ΔlgC ranged from 0.004 to 0.045 with low results of the determination results of REE. (3) The alkali fusion with sodium peroxide method eliminated the influence of matrix effects by selecting instrument optimization, sample dilution, appropriate internal standard elements, etc. The RSD ranged from 1.24% to 6.49%, and ΔlgC ranged from 0.001 to 0.032. In conclusion, alkali fusion with sodium peroxide method has a fast analysis process, complete sample dissolution, and the accuracy and precision of test results can meet the requirements of specification (DZ/T0011-2015), which is most suitable for the analysis of REE in polymetallic mineral samples from Pan-Xi region.

Source identification and driving factor apportionment for soil potentially toxic elements via combining APCS-MLR, UNMIX, PMF and GDM.

The contamination and quantification of soil potentially toxic elements (PTEs) contamination sources and the determination of driving factors are the premise of soil contamination control. In our study, 788 soil samples from the National Agricultural Park in Chengdu, Sichuan Province were used to evaluate the contamination degree of soil PTEs by pollution factors and pollution load index. The source identification of soil PTEs was performed using positive matrix decomposition (PMF), edge analysis (UNMIX) and absolute principal component score-multiple line regression (APCS-MLR). The geo-detector method (GDM) was used to analysis drivers of soil PTEs pollution sources to help interpret pollution sources derived from receptor models. Result shows that soil Cu, Pb, Zn, Cr, Ni, Cd, As and Hg average content were 35.2, 32.3, 108.9, 91.9, 37.1, 0.22, 9.76 and 0.15 mg/kg in this study area. Except for As, all are higher than the corresponding soil background values in Sichuan Province. The best performance of APCS-MLR was determined by comparison, and APCS-MLR was considered as the preferred receptor model for soil PTEs source distribution in the study area. ACPS-MLR results showed that 82.70% of Cu, 61.6% of Pb, 75.3% of Zn, 91.9% of Cr and 89.4% of Ni came from traffic-industrial emission sources, 60.9% of Hg came from domestic-transportation emission sources, 57.7% of Cd came from agricultural sources, and 89.5% of As came from natural sources. The GDM results showed that distance from first grade highway, population, land utilization and total potassium (TK) content were the main driving factors affecting these four sources, with q values of 0.064, 0.048, 0.069 and 0.058, respectively. The results can provide reference for reducing PTEs contamination in farmland soil.

Spatial distribution characteristics of soil heavy metals in Sabao Chaqu watershed of Tuotuo river, Qinghai-Tibet Plateau based on geographic detector.

The Qinghai-Tibet Plateau belongs to the area of extremely fragile environment and sensitive to human activities. In recent years, more and more human interference has been detected in this area. In this study, 128 surface soil samples were collected from the Sabao Chaqu watershed of the Tuotuo river at the source of the Yangtze River on the Qinghai-Tibet Plateau. The soil pollution status and spatial distribution characteristics of Cd, Hg, As, Cu, Pb, Cr, Zn and Ni were evaluated by soil accumulation index, enrichment factor, pollution index and geographical detector. The results showed that the average contents of As, Cd, Pb and Zn in the study area were 1.2-3.64 times higher than soil background values of Tibet, while the contents of Hg, Cr, Cu and Ni were lower than the background values, while the average content of As was higher than the soil pollution risk screening value (GB15618-2018), and the pollution index showed that As was in a low pollution state, while the other 7 heavy metals were in a safe state. There were significant differences in the spatial distribution of 8 heavy metals and there was a significant correlation with soil properties and distance factors. Factor detection showed that natural factors had the strongest explanatory power to the contents of As, Cd, Cr, Cu and Ni, distance from the lake and soil Sc content had the strongest explanatory power to Hg content, and anthropogenic factors had the strongest explanatory power to Pb content. Interaction detection revealed that the q values of the strongest interaction explanatory power for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn were 2.81, 4.30, 1.26, 2.47, 2.33, 1.59, 6.37, and 5.08 times higher than their strongest factor detection explanatory power, respectively. The interaction between anthropogenic factors and other factors has an important influence on the spatial differentiation of heavy metals in the study area. Risk detection showed that the average contents of As, Cd, Cr, Cu, Hg, Ni, Pb and Zn were the highest in the subregions of MgO, TS, Sc, X6, X13, MgO, TN and X4, respectively. Comprehensive study shows that the spatial differentiation of As, Cd, Cr, Cu, Ni and Zn is mainly affected by natural factors, but there are also some anthropogenic factors, the spatial differentiation of Hg is affected by both natural factors and atmospheric deposition, and the spatial distribution characteristics of Pb are mainly affected by anthropogenic factors.

Long non-coding RNA MIR600HG as a ceRNA inhibits the pancreatic cancer progression through regulating the miR-1197/PITPNM3 axis.

Objective: Pancreatic cancer (PC) is considered to be a highly malignant cancer with poor prognosis. Long non-coding RNAs (lncRNAs) is the potential factor to predict cancer prognosis. The effect of MIR600HG in PC needs to be further studied. Our work mainly focused on the importance of MIR600HG for PC prognosis and its underlying molecular mechanism of regulating PC progression. Methods: Data set was acquired from TCGA database to find differentially expressed genes and prognostic significance of MIR600HG in PC, and to construct the MIR600HG competitive endogenous RNA (ceRNA). Clinical specimens were collected to prove the analysis results. Vector over-expressed MIR600HG was transfected to study the roles of MIR600HG in proliferation, apoptosis, invasion and migration. The methods of CCK-8, flow cytometry, Transwell and scratch assays were all used in order to explore the apoptosis, migration and invasion. We evaluated the proliferation-related genes (PCNA, CyclinD1 and P27), as well as invasion and migration-related genes such as MMP-9, MMP-7 and ICAM-1. The transcriptional regulation between MIR600HG and miR-1197/PITPNM3 axis was determined with luciferase reporter assays. Results: In present study, MIR600HG was dropped in both PC tissues and cells, and the down-regulated MIR600HG was closely related to the poor clinical outcomes in PC patients. MIR600HG could inhibit proliferation, migration and invasion in PC cells. We also investigated whether MIR600HG acting as a sponge of microRNA-1197 (miR-1197) and miR-1197 acting on PITPNM3. We found the positive association between MIR600HG and PITPNM3, as well as the negative association of miR-1197 and MIR600HG (or PITPNM3). Moreover, PITPNM3 mRNA and protein expression saw a simultaneous increase after the MIR600HG-overexpression (MIR600HG-OE), but this result partially diminished in MIR600HG-OE cells and miR-1197 mimics. Conclusions: Our study explored the anticancer action of MIR600HG in PC by regulating miR-1197 to increase the expression of PITPNM3, which might help the diagnosis and therapy of PC.

Spatial differentiation of soil nutrients and their ecological chemometrics based on geographic detector in National Agricultural Park of Tangchang, Southwest China.

In order to analyze the spatial variability of soil nutrients and their ecological chemometrics in Tangchang Town, National Agricultural Park, 20 influencing factors were selected: soil pH, Cd, Hg, As, Cu, Pb, Cr, Zn, Ni, Se, elevation, slope, aspect, land use type, distance from industrial land, distance from commercial land, distance from railway, distance from residential area, distance from highway and distance from river. The effects of various influencing factors on the spatial variability of total organic carbon (TOC), total nitrogen (N), total phosphorus (P), total potassium (K) and ecological stoichiometry were analyzed by means of geographic detector. The results showed that average contents of soil TOC, N, P and K in the study area are 10.24 g kg-1, 1.33 g kg-1, 1.14 g kg-1 and 23.60 g kg-1, respectively, and there were significant differences in the spatial distribution of soil nutrients and their eco-stoichiometry in the study area, and TOC, N, P, K, C/N, C/P, C/K, N/P, N/K and P/K has a significant correlation with each other and most correlation coefficients are above 0.5 or below -0.5. Factor detection showed that soil properties, distance from railway and distance from residential area had the most significant explanatory power to the spatial heterogeneity of soil nutrients and eco-stoichiometry. Interaction detection showed that the interaction between soil properties with other factors was the most important factor affecting the spatial differentiation of soil nutrients and their ecological chemometrics, and elevation, distance from railway and distance from residential area were also important factors. Risk detection showed that the differences of soil nutrients and their ecological stoichiometry were most significant in the subregions of soil properties (pH, Cd, Hg, As, Cu, Pb, Cr, Zn, Ni and Se).

Mine pressure behavior law of isolated island working face under extremely close goaf in shallow coal seam.

In order to study the mining pressure characteristics of the shallow buried coal seam with the same silo working face under the very close mining void zone and the overlying coal rock body, the theoretical analysis is used to determine whether the open-cutting eye bearing layer belongs to the mining under the very close mining void zone or not, based on the numerical simulation of FLAC3D and on-site measurement of the working resistance at the end of the cycle of the working face's hydraulic bracket, It is proposed to divide the mining stress of the working face based on the advancing length of the working face, that is, the high-pressure zone, the transition zone and the low-pressure zone. The results of the study show that: FLAC3D software was used to analyze the stress intensity of the "C" island working face when it was mined back to 50 m, 100 m, 150 m, and 180 m (one time "square"), and the simulation results were imported into the Origin software, which was used to analyze the stress intensity of the working face. The simulation results were imported into Origin software, and the influence range of mining stress was divided into four areas: high-stress area, stress transition area, low-stress area, and "square" stress concentration area. According to the on-site measurement of the working resistance at the end of hydraulic support cycle, the initial pressure step of the working face under the overlying coal rock body is 48.9-55.7 m, with the peak value of 38 MPa, the cycle pressure step is 9.0-23.3 m, with the peak value of 36 MPa, and the dynamic load factor of the working face is 1.14-1.16; relative to the overlying coal rock body, the average decrease of the cycle pressure step is nearly 10% and the average increase of dynamic load factor is 1.14-1.16; compared with that under the overlying coal rock body, the average decrease of the cycle pressure step is nearly 10% and the average increase of dynamic load factor is 1.14-1.16. Compared with the overlying coal rock body, the average decrease of the cycle pressure step under the overlying mining zone is nearly 10%, the average increase of the dynamic load factor is 20%, and there is no obvious regularity and periodicity in the direction of strike, and the working face is divided into three parts along the direction of strike: high-pressure zone, transition zone, and low-pressure zone. Therefore, in the process of mining under the overlying coal rock body, we should strengthen the roadway peripheral rock support and roof and floor management, which is of guiding significance to the mining of similar working faces and mine safety production.

LncASAP1-IT1 promotes hepatocellular carcinoma progression through the regulation of the miR-1294/TGFBR1 pathway in vitro and in vivo.

Background: Hepatocellular carcinoma (HCC) is the most common tumor with severe morbidity and high mortality. The lncRNA ASAP1-IT1 [the intronic transcript 1 (IT-1) of ArfGAP with SH3 domain, ankyrin repeat and PH domain 1 (ASAP1)] have been shown to promote tumor formation in a variety of cancers. This study sought to investigate the effects of dysregulated ASAP1-IT1 on the biological processes of HCC. Methods: The expression levels of ASAP1-IT1 in 30 paired HCC and adjacent non-tumor tissues were measured by real-time-quantitative polymerase chain reaction (RT-qPCR). Several functional tests were performed to investigate the molecular mechanism of ASAP1-IT1 in HCC progression. Results: Our study showed that ASAP1-IT1 was highly expressed in the HCC tissues and cell lines. The knockdown of ASAP1-IT1 inhibited cell proliferation, migration, invasion, and epithelial-mesenchymal transition (EMT) progression and enhanced the sorafenib sensitivity of the HCC cells. Further investigations revealed that ASAP1-IT1 served as a sponge of microRNA-1294 (miR-1294) to promote transforming growth factor beta receptor 1 (TGFBR1) expression. In addition, the tumor-promoting effect of ASAP1-IT1 was blocked by inhibiting miR-1294/TGFBR1. Tumorigenic assays in nude mice demonstrated that the inhibition of ASAP1-IT1 inhibited the growth of HCC in vivo. Conclusions: These results suggest that lncASAP1-IT1 promotes HCC development by targeting TGFBR1 through miR-1294, which provides a potential target for HCC diagnosis and treatment.

[Research Progress on Spatial Differentiation and Influencing Factors of Soil Heavy Metals Based on Geographical Detector].

The geographical detector is a new statistical method to detect spatial stratified heterogeneity and reveal the driving factors behind it. It can not only reveal the influence of a single factor on dependent variables but also evaluate the influence of two-factor interactions and does not need to consider linearity, while also avoiding the influence of multivariate collinearity. Without strong model assumptions, it solves the limitations of traditional methods in analyzing category variables. The research on the spatial differentiation of heavy metals in soil is increasingly widely used. This study collected 40 research reports on the spatial differentiation of soil heavy metals via geographical detector, combed the discrete methods of independent variables, research scale, dependent variables and types of independent variables, factor detection, exchange detection, risk detection, and ecological detection and put forward the problems that need to be clarified in the future application of this research. It is expected to provide support for the deep application of geo-detector in the field of spatial differentiation of soil heavy metals.

Identification of Differential Compositions of Aqueous Extracts of Cinnamomi Ramulus and Cinnamomi Cortex.

Cinnamomi ramulus (CR) and Cinnamomi cortex (CC), both sourced from Cinnamomum cassia Presl, are commonly used Chinese medicines in the Chinese Pharmacopeia. However, while CR functions to dissipate cold and to resolve external problems of the body, CC functions to warm the internal organs. To clarify the material basis of these different functions and clinical effects, a simple and reliable UPLC-Orbitrap-Exploris-120-MS/MS method combined with multivariate statistical analyses was established in this study with the aim of exploring the difference in chemical compositions of aqueous extracts of CR and CC. As the results indicated, a total of 58 compounds was identified, including nine flavonoids, 23 phenylpropanoids and phenolic acids, two coumarins, four lignans, four terpenoids, 11 organic acids and five other components. Of these compounds, 26 significant differential compounds were identified statistically including six unique components in CR and four unique components in CC. Additionally, a robust HPLC method combined with hierarchical clustering analysis (HCA) was developed to simultaneously determine the concentrations and differentiating capacities of five major active ingredients in CR and CC: coumarin, cinnamyl alcohol, cinnamic acid, 2-methoxycinnamic acid and cinnamaldehyde. The HCA results showed that these five components could be used as markers for successfully distinguishing CR and CC. Finally, molecular docking analyses were conducted to obtain the affinities between each of the abovementioned 26 differential components, focusing on targets involved in diabetes peripheral neuropathy (DPN). The results indicated that the special and high-concentration components in CR showed high docking scores of affinities with targets such as HbA1c and proteins in the AMPK-PGC1-SIRT3 signaling pathway, suggesting that CR has greater potential than CC for treating DPN.

Genome-Wide Identification, Characterization, and Expression Analysis of CHS Gene Family Members in Chrysanthemum nankingense.

The chalcone synthase (CHS) gene family catalyzes the first committed step in the biosynthesis of flavonoids and plays key roles in various biological processes in plants. However, systematic studies of the CHS gene family in chrysanthemum remain unknown to date. In this study, 16 CnCHS genes were identified by searching the complete genome sequence of Chrysanthemum nankingense. Most contained two exons and one intron with Chal-sti-synt_N and Chal-sti-synt_C domains. A phylogenetic tree of CnCHSs indicated divergence into three major groups, including I, II, and III. Analyses of the genes and promoters of these genes indicated that there are many cis-acting elements that respond to light, phytohormones, stress, and developmental stages. The CnCHS genes have extensive patterns of expression in various tissues and stages of flower development. Tandemly repeated and segmental repeat genes were expressed at higher levels in different tissues than most of the CnCHS genes that have been identified. CnCHS10 is expressed at higher levels in various flower organs than in vegetative tissues, particularly in disc floret petals and pistils. Our study provides valuable information for the systematic analysis of the CnCHS gene family, which also contributes to further research on flavonoid synthesis and petal colors of chrysanthemum.

Spatial distribution characteristics of heavy metal(loid)s health risk in soil at scale on town level.

In order to reveal the Spatial distribution characteristics of heavy metal(loid)s health risk in soil on the town-scale, 788 topsoil samples were collected from a town in the hinterland of Chengdu Plain, with 5 subordinate communities and 17 administrative villages as the research sub regions. The USEPA health risk assessment model was used to assess the health risks of heavy metal(loid)s Cd, Hg, As, Cu, Pb, Cr, Zn and Ni in the soil, the health risk analysis method system based on the geographic detector and the optimized rank-size theory model are used to clarify the spatial differentiation and risk level difference of health risk in the study area. The results showed that the average values of Cd, Hg, As, Pb, Cr, Cu, Ni and Zn in the soil of the study area were 0.221, 0.155, 9.76, 32.2, 91.9, 35.2, 37.1 and 108.8 mg/kg, respectively. The health risks of heavy metal(loid)s in soil to adults and children are generally within the acceptable range, but the maximum hazard index of children and the maximum non-carcinogenic risk value of Cr to children are 2.653303 and 1.213098 respectively, which were exceeding the acceptable range. The carcinogenic risk of Cr and As to adults and children and the carcinogenic risk of Cd to children are at 1 × 10-4 to 1 × 10-6, exceeding the 10-6 health threshold. The q-value range of heavy metal(loid)s health risk spatial differentiation of soil in the study area is 0.016-0.425. The spatial differentiation of non-carcinogenic risk of Hg, As, Ni, Pb, Cd and Cr and the spatial differentiation of carcinogenic risk of Cr and As are larger, which needs further attention. The strictly controlled area of heavy metal(loid)s health risk in the soil of the study area (R ≥ 1.1) is mainly concentrated in the central, western and northeast sub regions, and most sub regions belong to the safe utilization area (0.9 < R < 1.1). The health risk assessment of heavy metal(loid)s in soil on a town scale is of positive significance for enriching health risk research methods, measuring health risk levels at different scales, and formulating refined risk management and control strategies.

[Spatial Differentiation and Influencing Factor Analysis of Soil Heavy Metal Content at Town Level Based on Geographic Detector].

Geographic detectors can quickly detect spatial stratified heterogeneity and quantitatively reveal the intensity of driving factors of heavy metal content, which is of great significance for the prevention, control, and remediation of soil heavy metal pollution. In order to reveal the spatial differentiation and influencing factors of soil heavy metal content on the town-scale, 788 topsoil samples were collected from a town in the hinterland of Chengdu Plain. Soil heavy metal (Cd, Hg, As, Cu, Pb, Cr, Zn, and Ni) pollution risk assessments were carried out by using the geo-accumulation index method. Additionally, based on the geographic detector model, 15 factors such as soil properties, topography, soil forming factors, and distance were taken as independent variables, and the contents of each heavy metal element were taken as dependent variables to explore the spatial differentiation and influencing factors of heavy metal content in soils. The results showed that:the average contents of Hg, As, Pb, Cr, Cu, Ni, and Zn in the study area were 1.06-1.93 times the background value of Chengdu, and the content of Cd was lower than the background value; among them, Hg reached the light pollution level, and the other seven heavy metals were at the non-pollution level. The spatial distribution of eight heavy metals was significantly different, the correlation among the elements was significant, and a significant correlation was found between most heavy meals with soil properties; however, the correlation with distance factor and topographic factor was relatively weak. The factor detection showed that TP, TK, pH, TOC, elevation, and distance from the railway had the most significant explanatory power for the heavy metal contents. Interaction detection showed that the interaction between soil properties and other factors was the dominant factor for the spatial variation in heavy metals, and elevation, distance from residential area, distance from railways, and distance from industrial areas were also important factors. Risk detection showed that Hg had the most significant difference in the subregion of elevation and distance from railway, whereas the other seven heavy metals had the most significant difference in the sub-regions of influencing factors of soil properties. The spatial distribution of heavy metals varied significantly in soil at the town-scale, which was closely related to soil properties, topography, and human activities in the study area.

Ecological and human health risk assessment of heavy metal(loid)s in agricultural soil in hotbed chives hometown of Tangchang, Southwest China.

To determine the heavy metal(loid)s (HMs) contamination of agricultural soil in hotbed chives hometown of Tangchang, 788 topsoil samples were collected and analyzed for their heavy metal(loid)s concentration. The index of geo-accumulation (Igeo), pollution index (PI) and potential ecological risk index (EIi) were used to assess the degree of pollution. Correlation analysis and principal component analysis (PCA) were used to determine the sources of soil HMs. Human health risks estimated with hazard index (HI) and carcinogenic risk (CR) indices based on ingestion, inhalation and dermal exposure pathways for adults and children. The mean values of Cd, Hg, As, Pb, Cr, Cu, Ni and Zn were 0.221, 0.155, 9.76, 32.2, 91.9, 35.2, 37.1 and 108.8 mg kg-1, respectively, which did not exceed the threshold values of the risk screening value for soil contamination. The potential ecological risk of soil heavy metal(loid)s was low level and there was no significant human health risk. Based on PCA, Pb and Hg may originate from transportation and atmospheric deposition, Zn, Cr and Ni may originate from natural sources and industrial activities, and Cu and Cd may originate from agricultural activities. Overall, from the perspective of HMs content, the soil quality in this study area was at a clean level. This study provides a reference and a basis for formulating effective measures to prevent and control HMs enrichment in agricultural soils.

Chinese expert consensus on conversion therapy for hepatocellular carcinoma (2021 edition).

Recent advances in systemic and locoregional treatments for patients with unresectable or advanced hepatocellular carcinoma (HCC) have resulted in improved response rates. This has provided an opportunity for selected patients with initially unresectable HCC to achieve adequate tumor downstaging to undergo surgical resection, a 'conversion therapy' strategy. However, conversion therapy is a new approach to the treatment of HCC and its practice and treatment protocols are still being developed. Review the evidence for conversion therapy in HCC and develop consensus statements to guide clinical practice. Evidence review: Many research centers in China have accumulated significant experience implementing HCC conversion therapy. Preliminary findings and data have shown that conversion therapy represents an important strategy to maximize the survival of selected patients with intermediate stage to advanced HCC; however, there are still many urgent clinical and scientific challenges for this therapeutic strategy and its related fields. In order to summarize and learn from past experience and review current challenges, the Chinese Expert Consensus on Conversion Therapy for Hepatocellular Carcinoma (2021 Edition) was developed based on a review of preliminary experience and clinical data from Chinese and non-Chinese studies in this field and combined with recommendations for clinical practice. Sixteen consensus statements on the implementation of conversion therapy for HCC were developed. The statements generated in this review are based on a review of clinical evidence and real clinical experience and will help guide future progress in conversion therapy for patients with HCC.

Dietary fibers with different viscosity regulate lipid metabolism via ampk pathway: roles of gut microbiota and short-chain fatty acid.

Dietary fiber (DF) improves gastrointestinal health and has important associations with the alleviation of intestinal diseases and metabolic syndrome. However, due to DFs complex characteristics, such as solubility, viscosity, and fermentability, the mechanism in these was not consistent. As an herbivore, the goose has a prominent digestive ability to DF. Therefore, we choose low, medium, and high viscosity DFs (respectively resistant starch-3 []RS], inulin [INU], and ß-glucan [GLU]) as Magang goose diet treatment for 4 wk, to investigate the effect and potential mechanism of different viscosities DFs on the growth and development process of goose. In summary, three degrees of viscous DFs could decrease the mechanismic lipid level of geese by promoting acid-producing bacteria and short-chain fatty acid (SCFA) production, therefore, activating AMPK pathway-related genes through the gut-liver axis. High viscous DF has a greater lipid-lowering effect on geese, while medium viscous DF has preferable intestinal mucosal protection.

GCSF as a Potential Molecular Target for Overall Survival of Hepatocellular Carcinoma.

BACKGROUND: Hepatocellular carcinoma (HCC) is one of the most common malignant tumors of the digestive tract in the world. Therefore, it is important to carry out studies on the molecular mechanisms of early diagnosis and treatment of HCC to reduce mortality. METHODS: Bioinformatic analysis was performed to explore the significant role of GCSF on the occurrence and development of neoplasm. Differently expressed genes (DEGs) were screened, and the significant hub genes related to GCSF were identified by the multiple algorithms of Cytoscape. Functional annotation for DEGs, pathological stage, and overall survival analysis were implemented. In addition, the verification for the role of GCSF on HCC was made via the clinical samples. A total of 70 participates diagnosed as HCC were recruited from November 2014 to November 2019. The immunohistochemistry assay, qRT-PCR, receiver operating characteristic (ROC) curves, and overall survival analysis were carried out. RESULTS: GCSF was related to the tumor size, and the expression of GCSF was up-regulated in hepatocellular carcinoma tissues. The enrichment results of GO and KEGG analysis were mainly enriched in "Inflammatory response", "Protein binding", "Metabolic pathways", and "Proteasome". The tumor diameter (P < 0.001), and survival time (P < 0.001) were significantly associated with the expression of GCSF via the verification of clinical data. The univariate and multivariate Cox proportional regression analysis manifested that high expression of GCSF in patients with HCC was related to poor OS. CONCLUSION: The expression level of GCSF is significantly associated with the prognostic survival of HCC, and it is expected to become a new prognostic marker of HCC, providing a novel idea for future basic research as well as targeted therapy.