Guidelines for ex vivo mechanical testing of tendon.

Tendons are critical for the biomechanical function of joints. Tendons connect muscles to bones and allow for the transmission of muscle forces to facilitate joint motion. Therefore, characterizing the tensile mechanical properties of tendons is important for the assessment of functional tendon health and efficacy of treatments for acute and chronic injuries. In this guidelines paper, we review methodological considerations, testing protocols, and key outcome measures for mechanical testing of tendons. The goal of the paper is to present a simple set of guidelines to the nonexpert seeking to perform tendon mechanical tests. The suggested approaches provide rigorous and consistent methodologies for standardized biomechanical characterization of tendon and reporting requirements across laboratories.

Looking Back on Graduate BME Admissions Data: Lessons Learned and Implications for Holistic Review and Diversity.

Graduate school applications in Biomedical Engineering (BME) are steadily rising, making competition stiffer, applications more complex, and reviews more resource intensive. Holistic reviews are being increasingly adopted to support increased diversity, equity, and inclusion in graduate student BME admissions, but which application metrics are the strongest predictors of admission and enrollment into BME programs remains unclear. In this perspectives article, we aim to shed light on some of the key predictors of student acceptance in graduate school. We share data from a three-year retrospective review of our own institution's graduate BME applications and admission rates and review the influence of grade point averages (GPA), standardized test scores (e.g., GRE), and prior research experience on graduate school admission rates. We also examine how the waiver of GRE requirements has changed the landscape of BME graduate applications in recent years. Finally, we discuss efforts taken by our institution and others to develop and implement holistic reviews of graduate applications that encourage students from underrepresented backgrounds to apply and successfully gain admission to graduate school. We share five key lessons we learned by performing the retrospective review and encourage other institutions to "self-reflect" and examine their historical graduate admissions data and past practices. Efforts aimed at engaging faculty to overcome their own implicit biases, engaging with underrepresented students in hands-on, research-intensive programs, and networking with diverse student populations have strong potential to enhance the diversity of BME graduate programs and our STEM workforce. Supplementary Information: The online version contains supplementary material available at 10.1007/s43683-022-00080-5.

A novel murine muscle loading model to investigate Achilles musculotendinous adaptation.

Achilles tendinopathy is a debilitating condition affecting the entire spectrum of society and a condition that increases the risk of tendon rupture. Effective therapies remain elusive, as anti-inflammatory drugs and surgical interventions show poor long-term outcomes. Eccentric loading of the Achilles muscle-tendon unit is an effective physical therapy for treatment of symptomatic human tendinopathy. Here, we introduce a novel mouse model of hindlimb muscle loading designed to achieve a tissue-targeted therapeutic exercise. This model includes the application of tissue (muscle and tendon)-loading "doses," coupled with ankle dorsiflexion and plantarflexion, inspired by human clinical protocols. Under computer control, the foot was rotated through the entire ankle joint range of motion while the plantar flexors simultaneously contracted to simulate body mass loading, consistent with human therapeutic exercises. This approach achieved two key components of the heel drop and raise movement: ankle range of motion coupled with body mass loading. Model development entailed the tuning of parameters such as footplate speed, number of repetitions, number of sets of repetitions, treatment frequency, treatment duration, and treatment timing. Initial model development was carried out on uninjured mice to define a protocol that was well tolerated and nondeleterious to tendon biomechanical function. When applied to a murine Achilles tendinopathy model, muscle loading led to a significant improvement in biomechanical outcome measures, with a decrease in cross-sectional area and an increase in material properties, compared with untreated animals. Our model facilitates the future investigation of mechanisms whereby rehabilitative muscle loading promotes healing of Achilles tendon injuries.NEW & NOTEWORTHY We introduce a novel mouse model of hindlimb muscle loading designed to achieve a tissue-targeted therapeutic exercise. This innovative model allows for application of muscle loading "doses," coupled with ankle dorsiflexion and plantarflexion, inspired by human loading clinical treatment. Our model facilitates future investigation of mechanisms whereby rehabilitative muscle loading promotes healing of Achilles tendon injuries.

In-Vivo Efficacy of Recombinant Human Hyaluronidase (rHuPH20) Injection for Accelerated Healing of Murine Retrocalcaneal Bursitis and Tendinopathy.

The deposition of aggrecan/hyaluronan (HA)-rich matrix within the tendon body and surrounding peritenon impede tendon healing and result in compromised biomechanical properties. Hence, the development of novel strategies to achieve targeted removal of the aggrecan-HA pericellular matrix may be effective in treating tendinopathy. The current study examined the therapeutic potential of a recombinant human hyaluronidase, rHuPH20 (FDA approved for reducing HA accumulation in tumors) for treating murine Achilles tendinopathy. The 12-week-old C57Bl/6 male mice were injected with two doses of rHuTGF-ß1 into the retrocalcaneal bursa (RCB) to induce a combined bursitis and tendinopathy. Twenty-four hours following induction of injury, treatment groups were administered rHuPH20 Hyaluronidase (rHuPH20; Halozyme Therapeutics) into the RCB. At either 6 h (acute), 9 days, or 25 days following hyaluronidase treatment, Achilles tendons were analyzed for gene expression, histology and immunohistochemistry, fluorophore-assisted carbohydrate electrophoresis, and biomechanical properties. The rHuPH20 treatment was effective, particularly at the acute and 9-day time points, in (a) removing HA deposits from the Achilles tendon and surrounding tissues, (b) improving biomechanical properties of the healing tendon, and (c) eliciting targeted increases in expression of specific cell fate, extracellular matrix metabolism, and inflammatory genes. The potential of rHuPH20 to effectively clear the pro-inflammatory, HA-rich matrix within the RCB and tendon strongly supports the future refinement of injectable glycosidase preparations as potential treatments to protect or regenerate tendon tissue by reducing inflammation and scarring in the presence of bursitis or other inducers of damage such as mechanical overuse. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:59-69, 2020.

Biomechanical comparison of subscapularis peel and lesser tuberosity osteotomy for double-row subscapularis repair technique in a cadaveric arthroplasty model.

INTRODUCTION: Management of the subscapularis during shoulder arthroplasty is controversial. The purpose of this study was to compare the biomechanical performance of subscapularis peel (SP) and lesser tuberosity osteotomy (LTO) in a cadaveric model. METHODS: The subscapularis and proximal humerus were dissected from all soft tissues in 21 fresh-frozen human cadaveric shoulders and randomized to undergo SP, LTO, or standard subscapularis tenotomy (ST, control). For SP and LTO, six #5 sutures were passed through eyelets in the implant (on lateral border and through drill holes in bicipital groove [2] and under trunion [4]). Double-row repair was performed using two lateral row transosseous sutures and four medial row sutures through the tendon (SP) or osseotendinous junction (LTO). Biomechanical properties and mode of failure were tested. RESULTS: There were no significant differences in elongation amplitude, cyclic elongation, or maximum load to failure between the three groups (P > 0.05). Mean stiffness was significantly higher in LTO (P = 0.009 vs. SP and ST). In the ST group, 7/7 specimens failed at the tendon-suture interface. For SP, 4/7 failed at the tendon-suture interface, one at the suture-bone interface, one fractured around the implant stem, and one at the knots. For LTO, 3/7 failed at the tendon-suture interface, two at the suture-bone interface and two fractured around the implant stem. CONCLUSIONS: In this cadaveric model, subscapularis repair via ST, SP, and LTO techniques was biomechanically equivalent. Additional studies are needed to confirm these findings and determine the influence of biologic healing on healing rates and clinical outcomes. LEVEL OF EVIDENCE: N/a, biomechanical laboratory study.

Knockout of hyaluronan synthase 1, but not 3, impairs formation of the retrocalcaneal bursa.

Hyaluronan (HA), a high molecular weight non-sulfated glycosaminoglycan, is an integral component of the extracellular matrix of developing and mature connective tissues including tendon. There are few published reports quantifying HA content during tendon growth and maturation, or detailing its effects on the mechanical properties of the tendon extracellular matrix. Therefore, the goal of the current study was to examine the role of HA synthesis during post-natal skeletal growth and maturation, and its influence on tendon structure and biomechanical function. For this purpose, the morphological, biochemical, and mechanical properties of Achilles tendons from wild type (WT) and hyaluronan synthase 1 and 3 deficient mouse strains (Has1-/- (Has1KO), Has3-/- (Has3KO), and Has1-/- 3-/- (Has1/3KO)) were determined at 4, 8, and 12 weeks of age. Overall, HAS-deficient mice did not show any marked differences from WT mice in Achilles tendon morphology or in the HA and chondroitin/dermatan sulfate (CS/DS) contents. However, HAS1-deficiency (in the single or Has1/3 double KO) impeded post-natal formation of the retrocalcaneal bursa, implicating HAS1 in regulating HA metabolism by cells lining the bursal cavity. Together, these data suggest that HA metabolism via HAS1 and HAS3 does not markedly influence the extracellular matrix structure or function of the tendon body, but plays a role in the formation/maintenance of peritendinous bursa. Additional studies are warranted to elucidate the relationship of HA and CS/DS metabolism to tendon healing and repair in vivo. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2622-2632, 2018.

TGF-b1 or hypoxia enhance glucose metabolism and lactate production via HIF1A signaling in tendon cells.

Purpose/Aim of the study: Healthy tendons are maintained in homeostasis through controlled usage of glucose for energy and redox equilibrium. Tendon cell stress imposed by overuse injury or vascular insufficiency is accompanied by activation of wound healing pathways which facilitate an adaptive response and the restoration of homeostasis. To understand this response at the gene expression level we have studied the in vivo effects of injected TGF-ß1 in a murine model of tendinopathy, as well as treatment of murine tendon explants with either TGF-ß1 or hypoxia in vitro. METHODS AND RESULTS: We provide evidence (from expression patterns and immunohistochemistry) that both in vivo and in vitro, the stress response in tendon cells may be metabolically controlled in part by glycolytic reprogramming. A major feature of the response to TGF-ß1 or hypoxia is activation of the Warburg pathway which generates lactate from glucose under normoxia and thereby inhibits mitochondrial energy production. CONCLUSIONS: We discuss the likely outcome of this major metabolic shift in terms of the potential benefits and damage to tendon and suggest how incorporation of this metabolic response into our understanding of initiation and progression of tendinopathies may offer new opportunities for diagnosis and the monitoring of therapies.

Diffusion Tensor Imaging of Tendons and Ligaments at Ultra-High Magnetic Fields.

Injuries to tendons and ligaments are a common problem limiting daily activities and athletic participation across all age groups. Conventional magnetic resonance imaging (MRI) is reliable for detecting complete tears in tendons and ligaments, but it has difficulty identifying low-grade injuries due to poor contrast and low intensity signal. We describe recent MRI advances using ultra-high magnetic fields and very short time echoes which overcome many of the limitations of the low signal and the short T2 of connective tissues. Using diffusion and relaxometry measurements at 11.7 T, we measured the high field relaxation times, mean diffusivity, and the fractional anisotropy of rabbit semitendinosus tendons and medial collateral ligaments. We found that ultra-high field diffusion tensor imaging and tractography provide repeatable and quantitative maps of fiber organization, which could improve injury diagnosis and therapeutic treatments and assist in presurgical planning.

Genome-wide analysis identifies differential promoter methylation of Leprel2, Foxf1, Mmp25, Igfbp6, and Peg12 in murine tendinopathy.

We have used a murine Achilles tendinopathy model to investigate whether tissue changes (such as collagen disorganization, chondroid metaplasia, and loss of tensile properties) which are broadly characteristic of human tendinopathies, are accompanied by changes in the expression of chromatin-modifying enzymes and the methylation status of promoter regions of tendon cell DNA. Tendinopathy was induced by two intra-tendinous TGF-ß1 injections followed by cage activity or treadmill running for up to 28 days. Activation of DNA methyltransferases occurred at 3 days after the TGF-ß1 injections and also at 14 days, but only with treadmill activity. Genome-wide Methyl Mini-Seq™ analysis identified 19 genes with differentially methylated promoters, five of which perform functions with an apparent direct relevance to tendinopathy (Leprel2, Foxf1, Mmp25, Igfbp6, and Peg12). The functions of the genes identified included collagen fiber assembly and pericellular interactions, therefore their perturbation could play a role in the characteristic disorganization of fibers in affected tendons. We postulate that a study of the functional genomics of these genes in animal and human tendon could further delineate the pathogenesis of this multi-factorial complex disease. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:947-955, 2017.

Biomechanical Performance of Medial Row Suture Placement Relative to the Musculotendinous Junction in Transosseous Equivalent Suture Bridge Double-Row Rotator Cuff Repair.

PURPOSE: To compare the biomechanical performance of medial row suture placement relative to the musculotendinous junction (MTJ) in a cadaveric transosseous equivalent suture bridge (TOE-SB) double-row (DR) rotator cuff repair (RCR) model. METHODS: A TOE-SB DR technique was used to reattach experimentally created supraspinatus tendon tears in 9 pairs of human cadaveric shoulders. The medial row sutures were passed either near the MTJ (MTJ group) or 10 mm lateral to the MTJ (rotator cuff tendon [RCT] group). After the supraspinatus repair, the specimens underwent cyclic loading and load to failure tests. The localized displacement of the markers affixed to the tendon surface was measured with an optical tracking system. RESULTS: The MTJ group showed a significantly higher (P = .03) medial row failure (5/9; 3 during cyclic testing and 2 during load to failure testing) compared with the RCT group (0/9). The mean number of cycles completed during cyclic testing was lower in the MTJ group (77) compared with the RCT group (100; P = .07) because 3 specimens failed in the MTJ group during cyclic loading. There were no significant differences between the 2 study groups with respect to biomechanical properties during the load to failure testing. CONCLUSIONS: In a cadaveric TOE-SB DR RCR model, medial row sutures through the MTJ results in a significantly higher rate of medial row failure. CLINICAL RELEVANCE: In rotator cuff tears with tendon tissue loss, passage of medial row sutures through the MTJ should be avoided in a TOE-SB RCR technique because of the risk of medial row failure.

Suture Technique Influences the Biomechanical Integrity of Pectoralis Major Repairs.

Pectoralis major ruptures occur in large, muscular individuals, and repair constructs may experience significant tension. Four different suture techniques were evaluated biomechanically to determine the effect of suture technique on optimizing fixation strength. Forty fresh-frozen cadaveric shoulders were repaired using endosteal buttons. The control group was repaired with #2 polyblend suture in a modified Mason-Allen stitch configuration. The triple group was repaired using the same suture and configuration, but with the addition of triple-loaded buttons. The configuration group was repaired using the same suture in a Krackow/Bunnell configuration. The tape group was repaired using 2-mm polyethylene tape and #5 polyblend suture in the Krackow/Bunnell configuration. Under cyclic loading, there was no significant difference between groups. Under load-to-failure testing, the tape group withstood a significantly greater maximum load (726.0±90.0 N) than the control and triple groups (330.2±20.2 and 400.2±35.2 N, respectively; P<.005), and similar load to the configuration group (509.9±68.6 N; P=.16). The configuration group failed via suture breakage (9/10); the other groups failed via suture pullout, in which suture pulled through tendon (26/30). Pectoralis major repair in a running, locked configuration appears to improve biomechanical performance by preventing suture pullout. Use of a polyethylene tape construct demonstrates the potential for improved failure loads, but its role remains undefined.

Assessment of glenoid chondral healing: comparison of microfracture to autologous matrix-induced chondrogenesis in a novel rabbit shoulder model.

BACKGROUND: Management of glenohumeral arthrosis in young patients is a considerable challenge, with a growing need for non-arthroplasty alternatives. The objectives of this study were to develop an animal model to study glenoid cartilage repair and to compare surgical repair strategies to promote glenoid chondral healing. METHODS: Forty-five rabbits underwent unilateral removal of the entire glenoid articular surface and were divided into 3 groups--untreated defect (UD), microfracture (MFx), and MFx plus type I/III collagen scaffold (autologous matrix-induced chondrogenesis [AMIC])--for the evaluation of healing at 8 weeks (12 rabbits) and 32 weeks (33 rabbits) after injury. Contralateral shoulders served as unoperated controls. Tissue assessments included 11.7-T magnetic resonance imaging (long-term healing group only), equilibrium partitioning of an ionic contrast agent via micro-computed tomography (EPIC-µCT), and histologic investigation (grades on International Cartilage Repair Society II scoring system). RESULTS: At 8 weeks, x-ray attenuation, thickness, and volume did not differ by treatment group. At 32 weeks, the T2 index (ratio of T2 values of healing to intact glenoids) was significantly lower for the MFx group relative to the AMIC group (P = .01) whereas the T1ρ index was significantly lower for AMIC relative to MFx (P = .01). The micro-computed tomography-derived repair tissue volume was significantly higher for MFx than for UD. Histologic investigation generally suggested inferior healing in the AMIC and UD groups relative to the MFx group, which exhibited improvements in both integration of repair tissue with subchondral bone and tidemark formation over time. DISCUSSION: Improvements conferred by AMIC were limited to magnetic resonance imaging outcomes, whereas MFx appeared to promote increased fibrous tissue deposition via micro-computed tomography and more hyaline-like repair histologically. The findings from this novel model suggest that MFx promotes biologic resurfacing of full-thickness glenoid articular injury.

Effect of highly purified capsaicin on articular cartilage and rotator cuff tendon healing: An in vivo rabbit study.

Highly purified capsaicin has emerged as a promising injectable compound capable of providing sustained pain relief following a single localized treatment during orthopedic surgical procedures. To further assess its reliability for clinical use, the potential effect of highly purified capsaicin on articular cartilage metabolism as well as tendon structure and function warrants clarification. In the current study, rabbits received unilateral supraspinatus transection and repair with a single 1 ml injection of capsaicin (R+C), PEG-only placebo (R+P), or saline (R+S) into the glenohumeral joint (GHJ). An additional group received 1 ml capsaicin onto an intact rotator cuff (I+C). At 18 weeks post-op, cartilage proteoglycan (PG) synthesis and content as well as cell viability were similar (p>0.05) across treatment groups. Biomechanical testing revealed no differences (p>0.05) among tendon repair treatment groups. Similarly, histologic features of both cartilage and repaired tendons showed minimal differences across groups. Hence, in this rabbit model, a single injection of highly purified capsaicin into the GHJ does not induce a deleterious response with regard to cartilage matrix metabolism and cell viability, or rotator cuff healing. These data provide further evidence supporting the use of injectable, highly purified capsaicin as a safe alternative for management of postoperative pain following GHJ surgery.

Recent Scientific Advances Towards the Development of Tendon Healing Strategies.

There exists a range of surgical and non-surgical approaches to the treatment of both acute and chronic tendon injuries. Despite surgical advances in the management of acute tears and increasing treatment options for tendinopathies, strategies frequently are unsuccessful, due to impaired mechanical properties of the treated tendon and/or a deficiency in progenitor cell activities. Hence, there is an urgent need for effective therapeutic strategies to augment intrinsic and/or surgical repair. Such approaches can benefit both tendinopathies and tendon tears which, due to their severity, appear to be irreversible or irreparable. Biologic therapies include the utilization of scaffolds as well as gene, growth factor, and cell delivery. These treatment modalities aim to provide mechanical durability or augment the biologic healing potential of the repaired tissue. Here, we review the emerging concepts and scientific evidence which provide a rationale for tissue engineering and regeneration strategies as well as discuss the clinical translation of recent innovations.

Comparison of glenohumeral contact pressures and contact areas after posterior glenoid reconstruction with an iliac crest bone graft or distal tibial osteochondral allograft.

BACKGROUND: Posterior glenoid bone deficiency in the setting of posterior glenohumeral instability is typically addressed with bone block augmentation with iliac crest bone grafts (ICBGs). Reconstruction with fresh distal tibial allograft (DTA) is an alternative option, with the theoretical advantages of restoring the glenoid articular surface, improving joint congruity, and providing the biological restoration of articular cartilage loss. HYPOTHESIS: Reconstruction with an ICBG and DTA would more effectively restore normal glenoid contact pressures, contact areas, and peak forces when compared with the deficient glenoid. STUDY DESIGN: Controlled laboratory study. METHODS: Eight fresh-frozen human cadaveric shoulders were tested in 4 conditions: (1) intact glenoid, (2) 20% posterior-inferior defect of the glenoid surface area, (3) 20% defect reconstructed with a flush ICBG, and (4) 20% defect reconstructed with a fresh DTA. For each condition, a 0.1 mm-thick dynamic pressure-sensitive pad was placed between the humeral head and glenoid. A compressive load of 440 N was applied for each condition in the following clinically relevant arm positions: (1) 30° of humeral abduction, (2) 60° of humeral abduction, and (3) 90° of flexion-45° of internal rotation (FIR). Glenohumeral contact pressures (kg/cm(2)), contact areas (cm(2)), and joint peak forces (N) were compared. RESULTS: Glenoid reconstruction with DTA resulted in significantly higher contact areas than the 20% defect model at 30°, 60°, and FIR at the time of surgery (P < .01 in all cases). The intact state exhibited significantly higher contact areas than the defect in all positions, significantly higher contact areas than the ICBG in all positions, and significantly higher contact areas than the DTA at 30° (P < .05 in all cases). The intact state experienced significantly lower contact pressures than the defect at 60° and FIR, while reconstruction with both a DTA and ICBG resulted in significantly lower contact pressures than the defect at 60° (P < .05 in all cases). There were no differences in contact pressures when comparing both the DTA and ICBG to the intact glenoid (P > .05 in all cases). There were no differences in peak forces between the groups, for any of the conditions, in any of the positions (P > .05 in all cases). CONCLUSION: Reconstruction of posterior glenoid bone defects with DTA conferred similar contact mechanics as reconstruction with ICBGs at the time of surgery. CLINICAL RELEVANCE: This study supports posterior glenoid reconstruction with fresh DTA as a viable alternative solution, with the potential advantage of improving joint congruity via an anatomic reconstruction, resulting in a cartilaginous, congruent articulation with the humeral head. Further studies are required to determine potential clinical effects of the glenohumeral joint contact mechanics reported here.

Inferior suture anchor placement during arthroscopic Bankart repair: influence of portal placement and curved drill guide.

BACKGROUND: During arthroscopic Bankart repair, inferior anchor placement is critical to a successful outcome. Low anterior anchors may be placed with a standard straight guide via midglenoid portal, with a straight guide with trans-subscapularis placement, or with curved guide systems. Purpose/ HYPOTHESIS: To evaluate glenoid suture anchor trajectory, position, and biomechanical performance as a function of portal location and insertion technique. It is hypothesized that a trans-subscapularis portal or curved guide will improve anchor position, decrease risk of opposite cortex breach, and confer improved biomechanical properties. STUDY DESIGN: Controlled laboratory study. METHODS: Thirty cadaveric shoulders were randomized to 1 of 3 groups: straight guide, midglenoid portal (MG); straight guide, trans-subscapularis portal (TS); and curved guide, midglenoid portal (CG). Three BioRaptor PK 2.3-mm anchors were inserted arthroscopically, with an anchor placed at 3, 5, and 7 o'clock. Specimens were dissected with any anchor perforation of the opposite cortex noted. An "en face" image was used to evaluate actual anchor position on a clockface scale. Each suture anchor underwent cyclic loading (10-60 N, 250 cycles), followed by a load-to-failure test (12.5 mm/s). Fisher exact test and mixed effects regression modeling were used to compare outcomes among groups. RESULTS: Anchor placement deviated from the desired position by 9.9° ± 11.4° in MG specimens, 11.1° ± 13.8° in TS, and 13.1° ± 14.5° in CG. After dissection, opposite cortex perforation at 5 o'clock occurred in 50% of MG anchors, 0% of TS, and 40% of CG. Of the 90 anchors tested, 17 (19%) failed during cyclic loading, with a similar failure rate across groups (P = .816). The maximum load was significantly higher for the 3-o'clock anchors when compared with the 5-o'clock anchors, regardless of portal or guide (P = .021). For the 5-o'clock position, there were significantly fewer "out" anchors in the TS group versus the CG or MG group (P = .038). There was no statistically significant difference in maximum load among groups at 5 o'clock. CONCLUSION: Accuracy in suture anchor placement during arthroscopic Bankart repair can vary depending on both portal used and desired position of anchor. The results of the current study indicate that there was no difference in ultimate load to failure among anchors inserted via a midglenoid straight guide, midglenoid curved guide, or percutaneous trans-subscapularis approach. However, midglenoid portal anchors drilled with a straight or curved guide and placed at the 5-o'clock position had significant increased risk of opposite cortex perforation compared with trans-subscapularis percutaneous insertion, with no apparent biomechanical detriment. CLINICAL RELEVANCE: The findings from this study will facilitate improved understanding of risks and benefits of several techniques for arthroscopic shoulder instability treatment with regard to suture anchor fixation.

Effect of interference screw depth on fixation strength in biceps tenodesis.

PURPOSE: The purpose of this study was to assess the biomechanical performance of the long head of the biceps tenodesis with an interference screw with respect to screw depth. METHODS: Twenty-one human cadaveric shoulders were randomized into 3 treatment groups (7 each): interference screw placed flush to the humeral cortex, 50% proud, or fully recessed. Bone density was determined, and subpectoral biceps tenodesis was performed with 8 × 12 mm Bio-Tenodesis screws (Arthrex, Naples, FL). Each construct was cyclically loaded from 5 to 70 N for 500 cycles at 1 Hz and then pulled to failure at 1 mm/s. Relative actuator displacement was calculated from cyclic testing. Maximum load, elongation, linear stiffness, and failure mode were recorded from pull-to-failure testing. Because of numerous failures during cyclic testing, the final load data from the fully recessed group were not statistically analyzed. The remaining groups were compared by use of a 2-tailed, Student unpaired t test and χ(2) analysis. RESULTS: There was no significant difference in displacement among groups during cyclic testing. Five specimens in the recessed group failed during cyclic testing, whereas 2 specimens and 0 specimens failed in the proud and flush groups, respectively. The maximum loads sustained were 281.6 ± 77.8 N, 184.5 ± 56.3 N, and 209.1 ± 57.0 N for the flush group, 50% proud group, and recessed group (in those specimens surviving cyclical loading), respectively. CONCLUSIONS: Placement of a Bio-Tenodesis screw flush to the humeral cortex is preferred for maximum fixation strength in subpectoral biceps tenodesis. A screw placed to 50% depth may be effective in the laboratory setting, but recessed placement is more variable and requires additional fixation. The fully recessed group resulted in 5 of 7 failures during cyclical loading, with no specimens failing in the flush group. CLINICAL RELEVANCE: This study shows the importance of determining the optimal depth of interference screw placement during biceps tenodesis to obtain optimal biomechanical performance and reduce the risk of fixation failure.