Clinical features and surgical management of traumatic acquired isolated superior rectus palsy.

PURPOSE: Isolated acquired superior rectus palsy (ASRP) is extremely rare. The goal of this report is to describe the clinical manifestations and surgical protocols for treatment of isolated traumatic ASRP. DESIGN: Retrospective observational case series. METHOD: Records of patients presenting with traumatic isolated ASRP from 2011 to 2020 were retrospectively reviewed. Variables analyzed included nature of the damage, ocular alignment, ocular motility, binocular vision, fundus photography, imaging and surgical treatment. RESULT: Of the 23,498 strabismus surgeries performed, 16 (0.07%) were identified as being attributable to traumatic isolated ASRP. Iatrogenic injury during orbital/brain tumorectomy was the most common cause for ASRP, followed by injury resulting from a sharp object, blunt instrument, car accident, dog bite, accidental fall and explosion. The main clinical features were hypotropia and deficient supraduction of the affected eye, accompanied by exotropia, extorsion, decreased vision and ptosis. The imaging examination showed the superior orbital wall fracture in 3 cases and superior rectus rupture in 7 cases. Inferior rectus recession and/or superior rectus resection comprised the major surgical procedures employed for these cases. Vertical deviations were reduced from 45.60 ± 17.52 PD preoperatively to 12.20 ± 12.97 PD postoperatively after an average of 22.70 months at follow-up, with a success rate of 50%. CONCLUSION: Traumatic isolated ASRP comprised only 0.07% of cases receiving strabismus surgery at our hospital. Orbital imaging is essential to identify whether muscle rupture, orbital fractures and/or other possible disorders are present. Superior rectus resection and inferior rectus recession represented the most frequently used surgical procedures.

Heterozygosity analysis of spontaneous 2n female gametes and centromere mapping of the diploid Hevea brasiliensis based on full-sib triploid populations.

KEY MESSAGE: Unreduced megagametophytes via second-division restitution were confirmed through heterozygosity analysis, and four candidate physical centromeres of rubber were located for the first time. The evaluation of maternal heterozygosity restitution (MHR) is vital in identifying the mechanism of 2n gametogenesis and assessing the utilization value of 2n gametes. In this study, three full-sib triploid populations were employed to evaluate the MHR of 2n female gametes of rubber tree clone GT1 and to confirm their genetic derivation. The 2n female gametes of GT1 were derived from second-division restitution (SDR) and transmitted more than half of the parental heterozygosity. In addition, low recombination frequency markers were developed, and four candidate physical centromeres of rubber tree were located for the first time. The confirmation that 2n female gametes of rubber tree clone GT1 are derived from SDR provides insights into the molecular mechanisms of 2n gametogenesis. In addition, the identified centromere location will aid in the development of centromeric markers for the rapid identification of the 2n gametogenesis mechanism.

Research on the dentification of Panax ginseng and Panax quinquefolium using catalysed hairpin assembly technology.

INTRODUCTION: Panax ginseng and Panax quinquefolium are traditional Chinese herb medicines and similar in morphology and some chemical components but differ in drug properties, so they cannot be mixed. However, the processed products of them are often sold in the form of slices, powder, and capsules, which are difficult to identify by traditional morphological methods. Furthermore, an accurate evaluation of P. ginseng, P. quinquefolium and the processed products have not been conducted. OBJECTIVE: This study aimed to establish a catalysed hairpin assembly (CHA) identification method for authenticating products made from P. ginseng and P. quinquefolium based on single nucleotide polymorphism (SNP) differences. METHOD: By analysing the differences of SNP in internal transcribed spacer 2 (ITS2) in P. ginseng and P. quinquefolium to design CHA-specific hairpins. Establish a sensitive and efficient CHA method that can identify P. ginseng and P. quinquefolium, use the sequencing technology to verify the accuracy of this method in identifying Panax products, and compare this method with high-resolution melting (HRM). RESULTS: The reaction conditions of CHA were as follows: the ratio of forward and reverse primers, 20:1; hairpin concentration, 5 ng/µL. Compared with capillary electrophoresis, this method had good specificity and the limit of detection was 0.5 ng/µL. The result of Panax product identification with CHA method were coincidence with that of the sequencing method; the positive rate of CHA reaction was 100%. CONCLUSION: This research presents an effective identification method for authenticating P. ginseng and P. quinquefolium products, which is helpful to improve the quality of Panax products.

Three-dimensional reconstruction of mobile binocular stereo vision based on push-broom line structured light for a workpiece surface.

Stereo vision technology based on line structured light can effectively solve the problem of a three-dimensional (3D) reconstruction of a smooth surface. A method for 3D reconstruction of mobile binocular stereo vision based on push-broom line structured light for a workpiece surface is presented in this paper. The subpixel coordinates of the light strip centers of the line structured light are obtained by the Steger algorithm while the binocular module moves along the guide rail, and the polar constraint is used to achieve the matching of the extracted light strip centers. As a result, the 3D coordinates of the light strip centers in each location can be calculated because of the known interior and external parameters of the binocular module. To obtain the 3D point cloud data of the entire surface, a relative pose optimization method with respect to the initial frame is proposed, which accurately estimates the pose of the cameras in each location with respect to that in the initial location and unifies the 3D coordinates of the light strip centers in each location to the datum coordinates. The relative pose optimization method first estimates the rough values by using the direct linear transform method, and then iteratively calculates the refined solutions based on the principle of minimizing the re-projection errors. Simulation data and substantial experimental results validate the effectiveness of our method. Our method is compared to the direct linear transform method and the frame-by-frame transfer method, and the root mean square error (RMSE) of the distance from 3D point cloud to fitted plane is used to evaluate the 3D reconstruction accuracy. The repeatability experiment shows that the RMSE from our method is as low as 0.83 mm.

Parameter identification framework of nonlinear dynamical systems with Markovian switching.

Extensive research has been conducted on models of ordinary differential equations (ODEs), yet these deterministic models often fail to capture the intricate complexities of real-world systems adequately. Thus, many studies have proposed the integration of Markov chains into nonlinear dynamical systems to account for perturbations arising from environmental changes and random variations. Notably, the field of parameter estimation for ODEs incorporating Markov chains still needs to be explored, creating a significant research gap. Therefore, the objective of this study is to investigate a comprehensive model capable of encompassing real-life scenarios. This model combines a system of ODEs with a continuous-time Markov chain, enabling the representation of a continuous system with discrete parameter switching. We present a machine discovery framework for parameter estimation in nonlinear dynamical systems with Markovian switching, effectively addressing this research gap. By incorporating Markov chains into the model, we adeptly capture the time-varying dynamics of real-life systems influenced by environmental factors. This approach enhances the applicability and realism of the research, enabling more precise representations of dynamical systems with Markovian switching in complex scenarios.

[Functional Genomics Analysis of Nitrogen and Phosphorus Transformation in Maize Rhizosphere Microorganisms].

Fertilizer reduction and efficiency improvement is an important basis for ensuring the safety of the agricultural ecological environment. Microorganisms are the key driving force for regulating the soil nitrogen and phosphorus cycle. Studying the nitrogen and phosphorus transformation function of rhizosphere microorganisms can provide a microbiological regulation approach for further improving the use efficiency of soil nitrogen and phosphorus. Based on the field micro-plot experiments of three typical farmland soils(phaeozem, cambisol, and acrisol), metagenomic sequencing technology was used to study the differences in functional genes and regulatory factors of maize rhizosphere microorganisms during soil nitrogen and phosphorus transformation. The results showed that the functional diversity of maize rhizosphere microorganisms was affected by soil type. The functional diversity of rhizosphere microorganisms in phaeozem and cambisol was mainly affected by water content and nutrient content, and that in acrisol was affected by total phosphorus(TP) and available phosphorus(AP). For soil nitrogen transformation, the gene abundance of related enzymes in the pathway of nitrogen transformation was the highest in the urease gene(ureC) and glucose dehydrogenase gene(gdh), which were 7.25×10-5-12.88×10-5 and 4.47×10-5-7.49×10-5, respectively. The total abundance of assimilatory nitrate reduction functional genes in acrisol was higher than that in phaeozem and cambisol, and the total abundance of functional genes related to other processes was the highest in cambisol. The abundance of functional genes encoding enzymes related to nitrogen metabolism was mainly driven by soil bacterial richness, total potassium(TK), and TP. For soil phosphorus transformation, the number of alkaline phosphatase genes(phoD) catalyzing organic phosphorus mineralization was 1093, and the number of acid phosphatase genes(PHO) was 42. The abundance of phoD was two orders of magnitude higher than that of PHO. In addition, fertilization had no significant effect on the abundance of phoD and PHO in the same soil type. Random forest analysis showed that the abundances of phoD and PHO were significantly affected by soil moisture, organic matter(OM), and total nitrogen(TN), but AP content had the greatest impact on PHO abundance. These results clarified the nitrogen and phosphorus transformation characteristics of maize rhizosphere microorganisms at the functional genomic level and enriched the molecular biological mechanism of the microbial nitrogen and phosphorus transformation function.

Surgical outcomes of bilateral lateral rectus recession versus unilateral recession and resection for the divergence excess type of intermittent exotropia.

Purpose: To compare bilateral lateral rectus recession (BLR) with unilateral recession and resection (RR) for divergence excess intermittent exotropia (IXT). Methods: Retrospective analysis of 66 patients with divergence excess IXT who underwent either BLR or RR from January 2013 to December 2020 was conducted. Data on demographics, pre- and postoperative deviations, fusion, stereopsis, control, and accommodative convergence/accommodation ratio were collected. Success was defined as esodeviation ≤5 PD (prism diopter) to exodeviation ≤10 PD with a follow-up time of at least 8.0 ± 2.0 weeks. Results: BLR (42 cases) and RR (24 cases) groups had the same success rate (83.3%, P = 0.688) and similar reduced postoperative deviations both in distance and at near (P > 0.05). Near-distance disparity decreased significantly in both groups (P = 0.000) with no intergroup difference (P = 0.193). Conclusion: BLR and RR were equally effective for divergence excess IXT with comparable outcomes of both distance and near deviations.

Random forest method for estimation of brake specific fuel consumption.

The internal combustion engine is a widely used power equipment in various fields, and its energy utilization is measured using brake specific fuel consumption (BSFC). BSFC map plays a crucial role in the analysis, optimization, and assessment of internal combustion engines. However, due to cost constraints, some values on the BSFC map are estimated using techniques like K-nearest neighbor, inverse distance weighted interpolation, and multi-layer perceptron, which are recognized for their limited accuracy, particularly when dealing with distributed sampled data. To address this, an improved random forest method is proposed for the estimation of BSFC. Polynomial features are employed to increase higher dimensions of features for random forest by nonlinear transformation, and critical parameters are optimized by particle swarm optimization algorithms. The performance of different methods was compared on two datasets to estimate 20%, 30%, and 40% of BSFC data, and the results reveal that the method proposed in this paper outperforms other common methods and is suitable for estimating the BSFC map.

Identification of prognostic nutritional index as a reliable prognostic indicator for advanced lung cancer patients receiving immune checkpoint inhibitors.

Background: Prognostic nutritional index (PNI) has been identified as a reliable prognostic factor for cancer adjuvant therapy. However, its prognostic value in lung cancer patients receiving immune checkpoint inhibitors (ICIs) remains inconclusive. Method: A systematic literature review and meta-analysis was performed based on online databases before March 1th 2023. The correlation of PNI with overall survival (OS) or progression-free survival (PFS) was determined using the hazard ratios (HRs) coupled with 95% confidence intervals (CIs). Then, a retrospective cohort enrolling 123 ICI-treated lung cancer patients from two hospitals was utilized for validation and further investigation. Results: A total of 14 studies enrolling 1,260 lung cancer patients were included in the meta-analysis. The high PNI level was significantly correlated with better OS (HR = 2.56, 95% CI = 1.86-3.54) and PFS (HR = 1.91, 95% CI = 1.53-2.40) of the lung cancer patients. The subgroup analysis confirmed the results except for the PFS in patients receiving anti-PD-1 therapy (HR = 1.51, 95% CI = 0.86-2.65). In the retrospective study, the high PNI level was identified as a favorable factor for OS and PFS not only in the whole cohort but also in the subgroups stratified by non-small cell lung cancer and small cell lung cancer. The high PNI was also correlated with better anti-cancer therapy response and performed better than body mass index and serum albumin level in OS prediction. Finally, we established a novel prognostic nomogram based on PNI and other clinical parameters. The nomogram was found to perform well in predicting the 1-year OS of ICI-treated lung cancer patients. Conclusion: Both the meta-analysis and retrospective work demonstrate the PNI is a reliable prognostic factor for advanced lung cancer patients receiving ICI-based therapies. Our study further highlights the crucial role of nutrition assessment and intervention in cancer immunotherapy. Systematic review registration: https://www.crd.york.ac.uk/prospero/, identifier: CRD42023424146.

Development and application of a visualization method for identification of Panax species with LAMP and a DNAzyme.

Panax ginseng and Panax quinquefolium are two valuable Chinese herbal medicines that should not be mixed because they differ in drug properties and efficacy. The traditional identification method is easily affected by subjective factors and cannot effectively distinguish between ginseng products. This study aimed to develop a new chemical analysis method to visually identify P. ginseng and P. quinquefolium. In this method, a large number of sequences containing G-quadruplex were generated by loop-mediated isothermal amplification, and the combination of G-quadruplex and hemin was used to form deoxyribozyme, which catalyzed the color change of H2O2. Artificial simulation of adulteration experiments revealed that this method could detect more than 20% adulterated P. quinquefolium. Compared with the traditional identification methods, this technology was simpler and more efficient, providing a reference for developing rapid visual identification methods and reagents for P. ginseng and P. quinquefolium.

Role of gut microbiota and bacterial metabolites in mucins of colorectal cancer.

Colorectal cancer (CRC) is a major health burden, accounting for approximately 10% of all new cancer cases worldwide. Accumulating evidence suggests that the crosstalk between the host mucins and gut microbiota is associated with the occurrence and development of CRC. Mucins secreted by goblet cells not only protect the intestinal epithelium from microorganisms and invading pathogens but also provide a habitat for commensal bacteria. Conversely, gut dysbiosis results in the dysfunction of mucins, allowing other commensals and their metabolites to pass through the intestinal epithelium, potentially triggering host responses and the subsequent progression of CRC. In this review, we summarize how gut microbiota and bacterial metabolites regulate the function and expression of mucin in CRC and novel treatment strategies for CRC.

The Keratectasia Volume (KEV) in Corneal Topography to Evaluate the Effect of Corneal Collagen Cross-linking in Pediatric Keratoconus.

The study aimed to evaluate the keratectasia volume (KEV) before and after corneal cross-linking (CXL) in pediatric patients. This study included 40 eyes of 25 pediatric patients (10-19 years) undergoing standard CXL. The support vector machine (SVM) algorithm was applied to transform mass pixels in corneal topography into a three-dimensioned model to calculate the KEV. The KEV, Kmax, K1, K2, Kave, keratectasia area (KEA), and thinnest corneal thickness (TCT) were determined before CXL and at 3, 6, and 12 months after surgery. The correlation between KEV and other parameters (Kmax, TCT, max decentration, eccentricity, and so on) was calculated. The KEV was 4.75 ± 0.74 preoperatively and 4.43 ± 1.22 postoperatively at last follow-up (p < 0.002). There was strong positive correlation between the KEV and Kmax (r = 0.806, p < 0.0005). The preoperat ive KEV was 4.32 ± 0.69 in mild to moderate keratoconus (Kmax < 58D) and 5.27 ± 0.37 in advanced keratoconus (Kmax > 58D) (p < 0.0005, t-test). Postoperative KEV and K readings remained stable at the early stage, and the KEV showed a more drastic decreasing trend than Kmax at sixth month. Statistical significance was found in the KEV between preoperative and 6 months after surgery (p < 0.0005), but not in Kmax and other parameters. In 83.3% (15 eyes out of 18 eyes) of the eyes, the preoperative KEV was greater than 4.6 in patients with significant flattening after CXL. Compared with K readings, the KEV can be regarded as a more sensitive index to evaluate the postoperative morphological changes after CXL in pediatric patients.

Responses of aquatic vegetables to biochar amended soil and water environments: a critical review.

Aquatic vegetables, including lotus root, water spinach, cress, watercress and so on, have been cultivated as commercial crops for a long time. Though aquatic vegetables have great edible and medicinal values, the increasing demands for aquatic vegetables with high quality have led to higher requirements of their soil and water environments. Unfortunately, the soil and water environment often face many problems such as nutrient imbalance, excessive fertilization, and pollution. Therefore, a new cost-effective and eco-friendly solution for addressing the above issues is urgently required. Biochars, one type of pyrolysis product obtained from agricultural and forestry waste, show great potential in reducing fertilizer application, upgrading soil quality and remediating pollution. Application of biochars in aquatic vegetable cultivation would not only improve the yield and quality, but also reduce its edible risk. Biochars can improve the soil micro-environment, soil microorganism and soil enzyme activities. Furthermore, biochars can remediate the heavy metal pollution, organic pollution and nitrogen and phosphorus non-point source pollution in the water and soil environments of aquatic vegetables, which promotes the state of cultivation conditions and thereby improves the yield and quality of aquatic vegetables. However, the harmful substances such as heavy metals, PAHs, etc. derived from biochars can cause environmental risks, which should be seriously considered. In this review, the application of biochars in aquatic vegetable cultivation is briefly summarized. The changes of soil physicochemical and biological properties, the effects of biochars in remediating water and soil environmental pollution and the impacts of biochars on the yield and quality of aquatic vegetables are also discussed. This review will provide a comprehensive overview of the research progress on the effects of biochars on soil and water environments for aquatic vegetable cultivation.

The Effect of the Histone Chaperones HSPA8 and DEK on Tumor Immunity in Hepatocellular Carcinoma.

Complex immune contexture leads to resistance to immunotherapy in hepatocellular carcinoma (HCC), and the need for new potential biomarkers of immunotherapy in HCC is urgent. Histone chaperones are vital determinants of gene expression and genome stability that regulate tumor development. This study aimed to investigate the effect of histone chaperones on tumor immunity in HCC. Bioinformatics analyses were initially performed using The Cancer Genome Atlas (TCGA) database, and were validated using the Gene Expression Omnibus (GEO) database and the International Cancer Genome Consortium (ICGC) database. Immune-related histone chaperones were screened with the Spearman rank coefficient. Consensus clustering was utilized to divide the HCC samples into two clusters. ESTIMATE, CIBERSORT and ssGSEA analyses were performed to assess immune infiltration. The expression of immunomodulatory genes, chemokines and chemokine receptors was analyzed to evaluate sensitivity to immunotherapy. The differentially expressed genes (DEGs) were included in weighted gene coexpression network analysis (WGCNA) to identify the hub genes. Enrichment analyses were used to investigate the functions of the hub genes. The Kaplan-Meier method and log-rank test were conducted to draw survival curves. A Cox regression analysis was utilized to identify independent risk factors affecting prognosis. HSPA8 and DEK were screened out from 36 known histone chaperones based on their strongest correlation with the ESTIMATE score. Cluster 2, with high HSPA8 expression and low DEK expression, tended to have stronger immune infiltration and better sensitivity to immunotherapy than Cluster 1, with low HSPA8 expression and high DEK expression. Furthermore, WGCNA identified 12 hub genes closely correlated with immune infiltration from the DEGs of the two clusters, of which FBLN2 was proven to be an independent protective factor of HCC patients. HSPA8 and DEK are expected to be biomarkers for precisely predicting the effect of immunotherapy, and FBLN2 is expected to be a therapeutic target of HCC.

A reinterpretation of the gap fraction of tree crowns from the perspectives of computer graphics and porous media theory.

The gap fraction (GF) of vegetative canopies is an important property related to the contained bulk of reproductive elements and woody facets within the tree crown volume. This work was developed from the perspectives of porous media theory and computer graphics techniques, considering the vegetative elements in the canopy as a solid matrix and treating the gaps between them as pores to guide volume-based GFvol calculations. Woody components and individual leaves were extracted from terrestrial laser scanning data. The concept of equivalent leaf thickness describing the degrees of leaf curling and drooping was proposed to construct hexagonal prisms properly enclosing the scanned points of each leaf, and cylinder models were adopted to fit each branch segment, enabling the calculation of the equivalent leaf and branch volumes within the crown. Finally, the volume-based GFvol of the tree crown following the definition of the void fraction in porous media theory was calculated as one minus the ratio of the total plant leaf and branch volume to the canopy volume. This approach was tested on five tree species and a forest plot with variable canopy architecture, yielding an estimated maximum volume-based GFvol of 0.985 for a small crepe myrtle and a minimal volume-based GFvol of 0.953 for a sakura tree. The 3D morphology of each compositional element in the tree canopy was geometrically defined and the canopy was considered a porous structure to conduct GFvol calculations based on multidisciplinary theory.

Advances in ligase-based nucleic acid amplification technology for detecting gene mutations: a review.

Gene mutation has been a concern for researchers because it results in genetic variations with base changes in molecular structure. Researchers continue to explore methods to detect gene mutations, which may help in disease diagnosis, medication guidance, and so on. Currently, the detection methods, such as whole-genome sequencing and polymerase chain reaction, have some limitations in terms of cost and sensitivity. Ligase (an enzyme) can recognize base mismatch as a commonly used tool in genetic engineering. Therefore, the ligase-related nucleic acid amplification technology for detecting gene mutations has become a research hotspot. In this study, the main techniques explored for detecting gene mutations included the ligase detection reaction, ligase chain reaction, rolling circle amplification reaction, enzyme-assisted polymerase chain reaction, and loop-mediated isothermal amplification reaction. This review aimed to analyze the aforementioned techniques and mainly present their advantages and disadvantages, sensitivity, specificity, cost, detection time, applications, and so on. The findings may help develop sufficient grounds for further studies on detecting gene mutations.

Effects of freeze-thaw cycles on nutrient removal from bioretention cells.

There have been numerous summaries of the runoff purification characteristics of bioretention cells in warm climates. However, little has been done on the effects of freeze-thaw cycles (FTCs) that frequently occur in cold regions on bioretention cell performance. Three experimental columns were constructed to simulate the operation of the bioretention cell under the FTCs. The effects of FTCs on the nutrient removal efficiency of different filling bioretention cells were analyzed. The results showed that the ammonia nitrogen (NH4+-N) concentration in the effluent of the wood chip bioretention cell under the T3 conditions (WBCF) (2.35 mg/L) was significantly higher than that of the wood chip bioretention cell operating at room temperature (WBCR) (0.62 mg/L). The effluent NH4+-N concentration of aluminum sludge bioretention cell (ABCF) (0.096 mg/L) under the FTCs was lower than that of WBCF (0.91 mg/L). Under the T3 condition, the effluent nitrate nitrogen (NO3--N) and total nitrogen (TN) concentrations of WBCF (5.33 mg/L and 8.86 mg/L) were higher than those of WBCR (5 mg/L and 6.11 mg/L) at room temperature. Under FTCs conditions, both WBCF and ABCF had high NO3--N removal efficiency (up to 85.87% and 24.75%) at the initial stage of thawing of the filler, and the efficiency gradually decreased with the thawing of the filler. With the increase of FTCs, the NO3--N removal efficiency of WBCF gradually decreased (always higher than 13.6%), while the removal efficiency of ABCF fluctuated wildly (the removal efficiency was primarily negative). The total phosphorus (TP) concentration in the effluent of WBCF (0.11 mg/L) under the T3 conditions was lower than that of WBCR (0.02 mg/L) at room temperature, and the TP concentration of ABCF (0.021 mg/L) in the effluent under the FTCs was slightly lower than that of WBCF (0.031 mg/L). The FTCs have a more significant impact on removing nitrogen pollutants in runoff, but have little effect on phosphorus. Compared with aluminum sludge, wood chips are more suitable for efficient removal of nitrogen pollutants in runoff under the FTCs. The experimental conclusions can provide a reference for the construction of bioretention cells in cold regions.

Active projection nonlinear γ correction method for fringe projection profilometry.

In fringe projection profilometry (FPP), the luminance nonlinearity generated by the superimposed γ effect of the projector and camera can lead to distortion of the intensity of the sinusoidal phase-shift fringe, resulting in a reduction of measurement precision and resolution. Traditional phase error compensation and γ-correction methods need to focus on the projector's optimal performance. However, commercial projectors often have huge apertures and are, therefore, unable to project a perfectly focused sinusoidal fringe image. This paper proposes an easy-to-implement active projection error correction method with high precision that is insensitive to projector defocus. After calibrating the projector to establish the nonlinear γ-response model of the optical measurement system, inverse γ compensation is performed. By generating and projecting a set of precorrected sinusoidal fringes, the camera can capture the high-quality sinusoidal fringe image and decrease the phase measurement error caused by the nonlinear γ effect of the FPP system. Computer simulations and experiments verify the effectiveness and feasibility of the proposed method for estimating and correcting the nonlinear γ distortion of the FPP system. The experimental results show that using the proposed active projection method to compensate for the error of the three-step phase-shift algorithm can achieve a high-precision measurement, and the influence of the system's nonlinear γ effect on the measurement accuracy is significantly suppressed.

Supernumerary Extraocular Muscle: A Rare Cause of Atypical Restrictive Strabismus.

Background and objectives: Supernumerary extraocular muscle (SEOM) is extremely rare. The purpose of this paper was to review the clinical characteristics and surgical outcomes of SEOM patients with atypical restrictive strabismus. Materials and Methods: A retrospective review was conducted on the data from 12 SEOM cases. Pre- and post-operative measurements consisted of visual acuity, cycloplegic refraction, ocular alignment, ocular motility, binocular vision, and imaging. Management strategies included either conservative or surgical treatments. Results: Of the 12 cases reviewed (seven females, five males), the mean ± SD age was 14.3 ± 10.6 years (range: 4-38 years). The right eye was affected in six cases, the left in five, and both eyes in one case. The major clinical manifestations included restrictive ocular motility (12 cases), with seven cases in no less than three directions; varying degrees of horizontal or vertical strabismus; ipsilateral amblyopia (10 cases); and unequal palpebral aperture (10 cases). Imaging results revealed muscular bands originating from the annulus of Zinn and insertion into the globe or other recti, as well as anomalous muscular bands connecting two or more recti, sometimes with optic nerve involvement. Three patients received conservative treatment, while rectus recession with or without resection (seven patients) or rectus disinsertion plus globe fixation (two patients) were performed in those receiving surgical treatments. A surgical success was achieved in four cases. Conclusions: For restrictive strabismus, imaging plays an important role in the diagnosis of SEOM. When the SEOM is difficult to resect, a personalized surgical strategy may be required to achieve a good ocular alignment.

Chemically Induced Compatible Interface in Pyrolyzed Bacterial Cellulose/Graphene Sandwich for Electrochemical Energy Storage.

Herein, a three-step approach toward a multi-layered porous PBC/graphene sandwich has been developed, in which the chemical bonding interactions have been successfully enhanced via esterification between the layers of pyrolyzed bacterial cellulose (PBC) and graphene. Such a chemically induced compatible interface has been demonstrated to contribute significantly to the mass transfer efficiency when the PBC/graphene sandwich is deployed as electrode material for both supercapacitors and lithium-sulfur batteries. The high specific capacitance of the supercapacitors has been increased by three times, to 393 F g-1 at 0.1 A g-1. A high initial discharge specific capacity (~1100 mAhg-1) and high coulombic efficiency (99% after 300 cycles) of the rPG/S-based lithium-sulfur batteries have been achieved.