Development of an "on-off-on" fluoroprobe utilizing an anthrylimidazole-based fluorescent ionic liquid for sensitive Cr(VI) and ascorbic acid detection.

Developing a rapid detection method of Cr(VI) and ascorbic acid (AA) is vital in the food and environmental fields. Herein, an anthrylimidazole-based fluorescent ionic liquid (AI-FIL) with the advantageous fluorescent properties was successfully prepared and used to construct a promising "on-off-on" fluoroprobe for rapid/sensitive Cr(VI) and AA detection. Cr(VI) could effectively quench the fluorescence of AI-FIL owing to the inner-filter effect and photoinduced electron-transfer process. However, the decreased fluorescence could be rapidly recovered by AA owing to the redox reaction between AA and Cr(VI). For Cr(VI) detection, a satisfactorily linear response (0.03-300 µM) was achieved with the corresponding detection limit of 9 nM. For AA detection, a good linearity from 1 to 1000 µM was obtained with the resultant detection limit of 0.3 µM. Moreover, the AI-FIL based fluoroprobe was successfully utilized for Cr(VI) and AA detection in food and water samples with satisfactory accuracy and precision.

Effect of oxidized starch on the storage stability of frozen raw noodles: Water distribution, protein structure, and quality attributes.

Freezing is a popular method of food preservation with multiple advantages. However, it may change the internal composition and quality of food. This study aimed to investigate the effect of modified starch on the storage stability of frozen raw noodles (FRNs) under refrigerated storage conditions. Oxidized starch (OS), a modified starch, is widely used in the food industry. In the present study, texture and cooking loss rate analyses showed that the hardness and chewiness of FRNs with added OS increased and the cooking loss rate decreased during the frozen storage process. Low-field nuclear magnetic resonance characterization confirmed that the water-holding capacity of FRNs with OS was enhanced. When 6% OS was added, the maximum freezable water content of FRNs was lower than the minimum freezable water content (51%) of FRNs without OS during freezing. Fourier-transform infrared spectroscopy showed that after the addition of OS, the secondary structures beneficial for structural maintenance were increased, forming a denser protein network and improving the microstructure of FRNs. In summary, the water state, protein structure, and quality characteristics of FRNs were improved by the addition of OS within an appropriate range.

Analysis of key circRNA events in the AOP framework of TCS acting on zebrafish based on the data-driven.

Triclosan (TCS) is a broad-spectrum antibiotic widely used in various personal care products. Research has found that exposure to TCS can cause toxic effects on organisms including neurotoxicity, cardiotoxicity, disorders of lipid metabolism, and abnormal vascular development, and the corresponding toxic mechanisms are gradually delving into the level of abnormal expression of miRNA regulating gene expression. Although the downstream mechanism of TCS targeting miRNA abnormal expression to induce toxicity is gradually improving, its upstream mechanism is still in a fog. Starting from the abnormal expression data of circRNA in zebrafish larvae induced by TCS, this study conducted a hierarchical analysis of the expression levels of all circRNAs, differential circRNAs, and trend circRNAs, and identified 29 key circRNA events regulating miRNA abnormal expression. In combination with GO and KEGG, the effects of TCS exposure were analyzed from the function and signaling pathway of the corresponding circRNA host gene. Furthermore, based on existing literature evidence about the biological toxicity induced by TCS targeting miRNA as data support, a competing endogenous RNAs (ceRNA) network characterizing the regulatory relationship between circRNA and miRNA was constructed and optimized. Finally, a comprehensive Adverse Outcome Pathway (AOP) framework of multiple levels of events including circRNA, miRNA, mRNA, pathway, and toxicity endpoints was established to systematically elucidate the toxic mechanism of TCS. Moreover, the rationality of the AOP framework was verified from the expression level of miRNA and adverse outcomes such as neurotoxicity, cardiotoxicity, oxidative stress, and inflammatory response by knockdown of circRNA48. This paper not only provides the key circRNA events for exploring the upstream mechanism of miRNA regulating gene expression but also provides an AOP framework for comprehensively demonstrating the toxicity mechanism of TCS on zebrafish, which is a theoretical basis for subsequent hazard assessment and prevention and control of TCS.

Integration of Myrica rubra-based N-doped carbon dots with Fe3S4 as excellent peroxidase mimics for colorimetric assay and smartphone-based intelligent sensing of p-aminophenol in waters.

To realize the reutilization of waste Myrica rubra in the analytical field, we synthesized Myrica rubra-based N-doped carbon dots (MN-CDs) and further anchored them onto the surface of Fe3S4 to fabricate Fe3S4@MN-CD nanocomposites. The as-fabricated nanocomposites possessed higher peroxidase-mimetic activity than its two precursors, resulting from the synergistic effect between them, and could catalyze colorless 3,3',5,5'-tetramethylbenzidine (TMB) into deep blue oxTMB with a strong 652-nm absorption. Under optimized conditions (initial solution pH, 3.5; incubation temperature, 35 ℃; Fe3S4@MN-CD concentration, 50 µg mL-1, and 652-nm absorption), Fe3S4@MN-CDs were employed for colorimetric assay of p-aminophenol (p-AP) with wide linear range (LR, 2.9-100 µM), low detection limit (LOD, 0.87 µM), and satisfactory recoveries (86.3-105%) in environmental waters. Encouragingly, this colorimetric assay provided the relative accuracy of 97.0-99.4% as compared with  conventional HPLC-UV detection. A portable smartphone-based colorimetric application was developed by combining the Fe3S4@MN-CD-based visually chromogenic reaction with a "Thing Identify" APP software. Besides, we engineered an image-capturing device feasible for field use, in which the internal-compact sealing prevented external light source from entering photography chamber, thereby reducing light interference, and also the bottom light source enhanced the intensity of blue imaging. This colorimetric platform exhibited satisfactory LR (1-500 µM), low LOD (0.3 µM), and fortification recoveries (86.6-99.6%). In the chromogenic reaction catalyzed by Fe3S4@MN-CDs, ·O2- played a key role in concomitant with the participation of •OH and h+. Both the colorimetric assay and smartphone-based intelligent sensing show great promising in on-site monitoring of p-AP under field conditions.

Mandibular cortical bone remodeling characteristics in patients with extraction: A cone-beam computed tomography study.

INTRODUCTION: This study evaluated the labial and lingual cortical bone remodeling characteristics of mandibular central incisors after retraction, which remain controversial among orthodontists. METHODS: Cortical bone remodeling and central incisor movement of 33 patients (aged 23.64 ± 4.30 years) who underwent mandibular first premolar extraction and incisor retraction at the crestal (S1), midroot (S2), and apical (S3) levels were analyzed using superimposed cone-beam computed tomography images on the basis of voxel-based registration of the mandibular stable region. Multivariate linear regression was used to explore the relationships between labial bone remodeling/tooth movement (BT) ratios and factors such as the ANB angle, mandibular plane angle (Mp-SN), and incisor movement patterns. The patients were divided into 4 groups according to the lingual cortical bone remodeling condition and the relationship between posttreatment incisor roots and the original lingual cortical bone border. At the 3 levels (S1, S2, and S3), the classifications of cortical bone remodeling of the mandibular incisors were calculated; t tests were used to compare the amount of labial and lingual bone remodeling, BT ratios, and lingual bone remodeling/root over the original border (BRo) ratios. RESULTS: The mean labial BT ratios at all 3 levels were close to 1. Multivariate linear regression indicated that the tooth movement pattern negatively correlated with the BT ratio at the S2 and S3 levels (P <0.05). Lingual bone apposition occurs when the root penetrates the original lingual cortical bone border in most patients. BRo ratios can more accurately reflect the inherent remodeling ability of the lingual cortical bone than BT ratios. The mean lingual BRo ratios were (1) S1 level: mandibular left central incisor (T31), 0.87 ± 0.25 and mandibular right incisor (T41), 0.86 ± 0.25; (2) S2 level: T31, 0.81 ± 0.12 and T41, 0.80 ± 0.22; and (3) S3 level: T31, 0.76 ± 0.20 and T41, 0.83 ± 0.26. There was no significant difference between labial BT ratios and lingual BRo ratios at the S2 and S3 levels. CONCLUSIONS: The amount of labial cortical bone resorption caused by mandibular incisor retraction showed varied relationships with the amount of tooth movement. Bodily retraction may decrease the labial BT ratios at the S2 and S3 levels. Active lingual cortical bone apposition occurred when the roots penetrated the original lingual border and exhibited strong remodeling ability.

Superior oxidase-mimetic activity of FeCo-NC dual-atom nanozyme for smartphone-based visually colorimetric assay of organophosphorus pesticides.

A colorimetric analysis platform has been successfully developed based on FeCo-NC dual-atom nanozyme (FeCo-NC DAzyme) for the detection of organophosphorus pesticides (OPPs). The FeCo-NC DAzyme exhibited exceptional oxidase-like activity (OXD), enabling the catalysis of colorless TMB to form blue oxidized TMB (oxTMB) without the need for H2O2 involvement. By combining acid phosphatase (ACP) hydrolase with FeCo-NC DAzyme, a "FeCo-NC DAzyme + TMB + ACP + SAP" colorimetric system was constructed, which facilitated the rapid detection of malathion. The chromogenic system was applied to detect malathion using a smartphone-based app and an auxiliary imaging interferogram device for colorimetric measurements, which have a linear range of 0.05-4.0 µM and a limit of detection (LOD) as low as 15 nM in real samples, comparable to UV-Vis and HPLC-DAD detection methods. Overall, these findings present a novel approach for convenient, rapid, and on-site monitoring of OPPs.

A network pharmacology-based method to explore the therapeutic effect of honokiol on diabetes with comorbid depression in mice.

The effective treatment of diabetes with comorbid depression is a big challenge so far. Honokiol, a bioactive compound from the dietary supplement Magnolia officinalis extract, possesses multiple health benefits. The present study aims to propose a network pharmacology-based method to elucidate potential targets of honokiol in treating diabetes with comorbid depression and related mechanisms. The antidepressant-like efficacy of honokiol was evaluated in high-fat diet (HFD) induced diabetic mice using animal behavior testing, immuno-staining and western blotting assay. Through network pharmacology analysis, retinoid X receptor alpha (RXRα) and vitamin D receptor (VDR) were identified as potential targets related to diabetes and depression. The stable binding conformation between honokiol and RXR/VDR was determined by molecular docking simulation. Moreover, hononkiol effectively alleviated depression-like behaviors in HFD diabetic mice, presented anti-diabetic and anti-neuroinflammatory functions, and protected the hippocampal neuroplasticity. Importantly, honokiol could activate RXR/VDR heterodimer in vivo. The beneficial effects of honokiol on HFD mice were significantly suppressed by UVI3003 (a RXR antagonist), while enhanced by calcitriol (a VDR agonist). Additionally, the disruption of autophagy in the hippocampus of HFD mice was ameliorated by honokiol, which was attenuated by UVI3003 but strengthened by calcitriol. Taken together, the data provide new evidence that honokiol exerts the antidepressant-like effect in HFD diabetic mice via activating RXR/VDR heterodimer to restore the balance of autophagy. Our findings indicate that the RXR/VDR-mediated signaling might be a potential target for treating diabetes with comorbid depression.

Quantitative evaluation of vertical control in orthodontic camouflage treatment for skeletal class II with hyperdivergent facial type.

BACKGROUND: In this study, we sought to quantify the influence of vertical control assisted by a temporary anchorage device (TAD) on orthodontic treatment efficacy for skeletal class II patients with a hyperdivergent facial type and probe into the critical factors of profile improvement. METHODS: A total of 36 adult patients with skeletal class II and a hyperdivergent facial type were included in this retrospective case-control study. To exclude the effect of sagittal anchorage reinforcement, the patients were divided into two groups: a maxillary maximum anchorage (MMA) group (N = 17), in which TADs were only used to help with anterior tooth retraction, and the MMA with vertical control (MMA + VC) group (N = 19), for which TADs were also used to intrude the maxillary molars and incisors. The treatment outcome was evaluated using dental, skeletal, and soft-tissue-related parameters via a cephalometric analysis and cast superimposition. RESULTS: A significant decrease in ANB (P < 0.05 for both groups), the retraction and uprighting of the maxillary and mandibular incisors, and the retraction of protruded upper and lower lips were observed in both groups. Moreover, a significant intrusion of the maxillary molars was observed via the cephalometric analysis (- 1.56 ± 1.52 mm, P < 0.05) and cast superimposition (- 2.25 ± 1.03 mm, P < 0.05) of the MMA + VC group but not the MMA group, which resulted in a remarkable decrease in the mandibular plane angle (- 1.82 ± 1.38°, P < 0.05). The Z angle (15.25 ± 5.30°, P < 0.05) and Chin thickness (- 0.97 ± 0.45°, P < 0.05) also improved dramatically in the MMA + VC group, indicating a better profile and a relaxed mentalis. Multivariate regression showed that the improvement in the soft tissue was closely related to the counterclockwise rotation of the mandible plane (P < 0.05). CONCLUSIONS: TAD-assisted vertical control can achieve intrusion of approximately 2 mm for the upper first molars and induce mandibular counterclockwise rotation of approximately 1.8°. Moreover, it is especially important for patients without sufficient retraction of the upper incisors or a satisfactory chin shape.

Edge-oriented growth of cadmium sulfide nanoparticles on nickel metal-organic framework nanosheets for photocatalytic hydrogen evolution.

In this study, a directional loading of cadmium sulfide (CdS) nanoparticles (NPs) was achieved on the opposite edges of nickel metal-organic framework (Ni-MOF) nanosheets (NSs) by adjusting the weight ratio of CdS NPs in the reaction process to produce effective visible light photocatalysts. The close contact between the zero-dimensional (0D) and two-dimensional (2D) regions and the matching positions of the bands promoted charge separation and heterojunction formation. The optimal CdS NPs loading of composite material was 40 wt%. At this ratio, CdS NPs grew primarily at the opposite edges of the Ni-MOF NSs rather than on their surfaces. When lactic acid was used as the sacrificial agent, the hydrogen production rate of the 40 %-CdS/Ni-MOF heterojunction under visible light irradiation was 19.6 mmol h-1 g-1, making a 20-fold enhancement compared to the original CdS NPs sample (1.0 mmol h-1 g-1). The charge carriers generated in CdS NPs were transferred to Ni-MOF NSs through heterojunctions, where Ni-MOF NSs also served as cocatalysts to improve hydrogen production. The combination of the two materials improved the light absorption ability. In particular, the 40 %-CdS/Ni-MOF heterojunction exhibited good photostability, effectively preventing the photocorrosion of CdS NPs. This study introduces an approach for constructing efficient and stable photocatalysts for visible light-driven photocatalytic hydrogen production.

A naphthalimide-based portable fluorescent sensor integrated with a photoelectric converter for rapid and on-site detection of type II pyrethroids in celery.

The on-site detection of pyrethroids, particularly type II pyrethroids, remains a challenging task in complex vegetable samples. Herein, a novel method based on naphthalimide was developed to realize the specific detection of type II pyrethroids by hydrolyzing and utilizing the compound m-phenoxybenzaldehyde (3-PBD). Hydrazine group, used as the appropriate moiety, was introduced into the fluorescent dye 1,8-naphthalimide to construct the fluoroprobe NAP. In the presence of 3-PBD, NAP displayed the prominently enhanced fluorescence and also exhibited high selectivity. This proposed method exhibited high anti-inference effects in complex media, realizing sensitive detection of 3-PBD with linear range of 2.15-800 µM and a low detection limit (LOD) of 0.64 µM. The underlying fluorescence-responsive mechanisms were in-depth elucidated by combining spectral analyses with TD-DFT theoretical calculations. Additionally, a direct and rapid hydrolysis method for deltamethrin in celery was established, achieving a high hydrolysis efficiency of >90% within 15 min. Furthermore, a portable fluorescence sensor (PFS) was developed based on high-power LEDs and photodetectors. PFS supplied a LOD of 2.23 µM for 3-PBD and exhibited comparable stability by a fluorescence spectrometer when detecting celery hydrolysate. Moreover, external power source is not required for PFS operations, thereby enabling rapid and on-site detection by transmitting data to a smartphone via bluetooth. These findings extend the academic knowledge in the field of specific pyrethroids detection and contribute to the development of on-site methods for pesticide residual analyses in food matrices.

Deriving ecological risk thresholds for soil molybdenum in China based on interspecies correlation estimation and quantitative ion character-activity relationship models.

Soil molybdenum (Mo) levels can reach ecologically hazardous levels. China has not yet established the relevant thresholds, posing challenges for environmental management. Therefore, we present our data relevant to Mo toxicity for several important species. By normalizing soil properties, we obtained a correlation model of Mo toxicity to Hordeum vulgare, as well as 31 models for the toxicity of other elements including Cu and Ni to invertebrates and microbial processes. Using interspecies correlation estimation (ICE) extrapolation, the sensitivity coefficient (0.12-0.71) for five plants were found. For invertebrates and microbial processes lacking Mo data, we used regression analysis to establish Mo toxicity models based on the soil quantitative ion character-activity relationships (s-QICAR; R2 =0.70-0.95) and known toxicities of other metal elements to invertebrate and microbial processes. Furthermore, combining species sensitivity distribution calculations, the HC5 values for protecting 95% of soil species from Mo in three typical soil scenarios in China were calculated. After correction, the predicted no-effect concentrations were 6.8, 4.8, and 3.4 mg/kg, respectively. This study innovatively combined ICE and s - QICAR to derive soil Mo thresholds. Our results can provide a basis for decision-making in the assessment and management of soil Mo pollution.

Effect of Preheating and Post-Heating on the Microstructures and Mechanical Properties of TC17-Ti2AlNb Joint with Electron Beam Welding.

To enhance welding quality and performance, preheating and post-heating are usually employed on high-temperature materials, concurrently with welding. This is a novel technique in vacuum chamber electron beam welding (EBW). TC17 and Ti2AlNb alloys are the hot topics in aero-engine parts, and the welding of dissimilar materials is also a broad prospect. To settle welding cracks of Ti2AlNb, EBW with preheating and post-heating was investigated on TC17 and Ti2AlNb dissimilar alloy, which improved the manufacturing technology on high-temperature materials. The dissimilar joint no longer had cracks after preheating, which exhibited excellent welding stability and metallurgical homogeneity, and preheating and annealing had an important effect on mechanical properties. The joint strength after 630 °C annealing is higher than that of TC17 alloy base metal (BM) and other annealing temperatures, reaching 1169 MPa at room temperature and 894 MPa at 450 °C tensile condition. The joint plasticity after 740 °C annealing is equivalent to TC17 BM. EBW with preheating improved the microstructure characteristics and enhanced the plasticity of Ti2AlNb alloy weld and dissimilar joint, which would contribute to the application of Ti2AlNb alloy and Ti2AlNb dissimilar parts.

Customizable Organic Charge-Transfer Cocrystals for the Dual-Mode Optoelectronics in the NIR (II) Window.

Organic molecules have been regarded as ideal candidates for near-infrared (NIR) optoelectronic active materials due to their customizability and ease of large-scale production. However, constrained by the intricate molecular design and severe energy gap law, the realization of optoelectronic devices in the second near-infrared (NIR (II)) region with required narrow band gaps presents more challenges. Herein, we have originally proposed a cocrystal strategy that utilizes intermolecular charge-transfer interaction to drive the redshift of absorption and emission spectra of a series BFXTQ (X = 0, 1, 2, 4) cocrystals, resulting in the spectra located at NIR (II) window and reducing the optical bandgap to ∼0.98 eV. Significantly, these BFXTQ-based optoelectronic devices can exhibit dual-mode optoelectronic characteristics. An investigation of a series of BFXTQ-based photodetectors exhibits detectivity (D*) surpassing 1013 Jones at 375 to 1064 nm with a maximum of 1.76 × 1014 Jones at 1064 nm. Moreover, the radiative transition of CT excitons within the cocrystals triggers NIR emission over 1000 nm with a photoluminescence quantum yield (PLQY) of ∼4.6% as well as optical waveguide behavior with a low optical-loss coefficient of 0.0097 dB/µm at 950 nm. These results promote the advancement of an emerging cocrystal approach in micro/nanoscale NIR multifunctional optoelectronics.

Innovative detection mechanism for deltamethrin based on a dual-emitting Fluoroprobe and its application in a smartphone-based photoelectric conversion device.

Pyrethroids are widely used insecticides worldwide, while their on-site and rapid detection still faces technological challenges. Herein, an innovative detection mechanism was designed for deltamethrin, a typical kind of type II pyrethroids, based on a dual-emitting fluoroprobe consisting of NH2-SiQDs and Eu3+. Deltamethrin can rapidly hydrolyze into 3-phenoxybenzaldehyde (3-PBD) and react specifically with fluoroprobe, causing fluorescence quenching of SiQDs while maintaining the fluorescent stability of Eu3+. Building upon the above fluorescence-responsive principle, SiQDs@Eu3+ provided satisfactorily dual-emitting signals, realizing the highly-selective and sensitive detection of deltamethrin. Correlation between the surface structure of SiQDs and their absorption spectra was in-depth unraveled by TD-DFT calculation and FT-IR analysis. As for the analytical performance, the recovery and LOD of deltamethrin in lettuce, provided by SiQDs@Eu3+, were comparable or even superior over conventional chromatographic analysis. Meanwhile, an innovative smartphone-based optical device was developed, which greatly decreased errors caused by the previously reported smartphone-based fluorescence detection.

Multi-Stimulus Least-Squares Transformation With Online Adaptation Scheme to Reduce Calibration Effort for SSVEP-Based BCIs.

Steady-state visual evoked potential (SSVEP), one of the most popular electroencephalography (EEG)-based brain-computer interface (BCI) paradigms, can achieve high performance using calibration-based recognition algorithms. As calibration-based recognition algorithms are time-consuming to collect calibration data, the least-squares transformation (LST) has been used to reduce the calibration effort for SSVEP-based BCI. However, the transformation matrices constructed by current LST methods are not precise enough, resulting in large differences between the transformed data and the real data of the target subject. This ultimately leads to the constructed spatial filters and reference templates not being effective enough. To address these issues, this paper proposes multi-stimulus LST with online adaptation scheme (ms-LST-OA). METHODS: The proposed ms-LST-OA consists of two parts. Firstly, to improve the precision of the transformation matrices, we propose the multi-stimulus LST (ms-LST) using cross-stimulus learning scheme as the cross-subject data transformation method. The ms-LST uses the data from neighboring stimuli to construct a higher precision transformation matrix for each stimulus to reduce the differences between transformed data and real data. Secondly, to further optimize the constructed spatial filters and reference templates, we use an online adaptation scheme to learn more features of the EEG signals of the target subject through an iterative process trial-by-trial. RESULTS: ms-LST-OA performance was measured for three datasets (Benchmark Dataset, BETA Dataset, and UCSD Dataset). Using few calibration data, the ITR of ms-LST-OA achieved 210.01±10.10 bits/min, 172.31±7.26 bits/min, and 139.04±14.90 bits/min for all three datasets, respectively. CONCLUSION: Using ms-LST-OA can reduce calibration effort for SSVEP-based BCIs.

Comparative impact of pristine and aged microplastics with triclosan on lipid metabolism in larval zebrafish: Unveiling the regulatory role of miR-217.

The prevalence of microplastics (MPs), especially aged particles, interacting with contaminants like triclosan (TCS), raises concerns about their toxicological effects on aquatic life. This study focused on the impact of aged polyamide (APA) MPs and TCS on zebrafish lipid metabolism. APA MPs, with rougher surfaces and lower hydrophobicity, exhibited reduced TCS adsorption than unaged polyamide (PA) MPs. Co-exposure to PA/APA MPs and TCS resulted in higher TCS accumulation in zebrafish larvae, notably more with PA than APA. Larvae exposed to PA + TCS exhibited greater oxidative stress, disrupted lipid metabolism, and altered insulin pathway genes than those exposed to TCS. However, these negative effects were lessened in the APA + TCS group. Through miRNA-seq and miR-217 microinjection, it was revealed that PA + TCS co-exposure upregulated miR-217, linked to lipid metabolic disorders in zebrafish. Moreover, molecular docking showed stable interactions formed between PA, TCS, and the insulin signaling protein Pik3r2. This study demonstrated that PA and TCS co-exposure significantly inhibited the insulin signaling in zebrafish, triggering lipid metabolism dysregulation mediated by miR-217 upregulation, while APA and TCS co-exposure alleviated these disruptions. This research underscored the ecological and toxicological risks of aged MPs and pollutants in aquatic environments, providing crucial insights into the wider implications of MPs pollution.

LncRNA MCM3AP-AS1 promotes chemoresistance in triple-negative breast cancer through the miR-524-5p/RBM39 axis.

Triple-negative breast cancer (TNBC) is the most lethal subtype of BC, with unfavorable treatment outcomes. Evidence suggests the engagement of lncRNA MCM3AP-AS1 in BC development. This study investigated the action of MCM3AP-AS1 in chemoresistance of TNBC cells. Drug-resistant TNBC cell lines SUM159PTR and MDA-MB-231R were constructed by exposure to increasing concentrations of doxorubicin/docetaxel (DOX/DXL). MCM3AP-AS1 and miR-524-5p expression levels were determined by RT-qPCR. RNA binding motif 39 (RBM39) level was measured using Western blot. Cell viability and apoptosis were assessed by CCK-8 assay and flow cytometry. The targeted binding of miR-524-5p with MCM3AP-AS1 or RBM39 was predicted by ECORI database and validated by dual-luciferase assays. The gain-and-loss of function assays were conducted in cells to investigate the interactions among MCM3AP-AS1, miR-524-5p, and RBM39. TNBC xenograft mouse models were established through subcutaneous injection of MCM3AP-AS1-silencing MDA-MB-231R cells and intraperitoneally administrated with DOX/DXL to verify the role of MCM3AP-AS1 in vivo. MCM3AP-AS1 was upregulated in drug-resistant TNBC cells, and MCM3AP-AS1 silencing could sensitize drug-resistant TNBC cells to chemotherapeutic drugs by promoting apoptosis. MCM3AP-AS1 targeted miR-524-5p. After DOX/DXL treatment, miR-524-5p inhibition partially reversed the effect of MCM3AP-AS1 silencing on inhibiting chemoresistance and promoting apoptosis of drug-resistant TNBC cells. miR-524-5p targeted RBM39. Silencing MCM3AP-AS1 promoted apoptosis via the miR-524-5p/RBM39 axis, thereby enhancing chemosensitivity of drug-resistant TNBC cells. MCM3AP-AS1 knockdown upregulated miR-524-5p, downregulated RBM39, and restrained tumor development in vivo. MCM3AP-AS1 silencing potentiates apoptosis of drug-resistant TNBC cells by upregulating miR-524-5p and downregulating RBM39, thereby suppressing chemoresistance in TNBC.

Molecular and Family Analyses of a Novel RHD1058G>C Allele in a Chinese RhD Population.

BACKGROUND: Rh(D) phenotype in a sample from a 19-year-old female patient showed weak positivity (1+). A follow-up sample was requested to further define the Rh(D) phenotype, her Rh(D) phenotype was tested by using another reagent, Rh(D) phenotype still showed weak reactivity (1+), RhCcEe phenotype was Ccee. METHODS: Seven samples from the family members of the proposita were received. The RhDCcEe phenotypes were typed by the microcolumn gel card and the unexpected antibodies were assayed by indirect anti-human globulin test (IAT). Genomic DNA was extracted from the blood sample and the novel RHD1058G>C allele was detected through an established sequence-specific primer PCR (PCR-SSP), RHD exons 1 - 10 were sequenced afterward by exon-specific amplification. The distribution of RHD1058G>C allele and RHD weak positive phenotype were investigated in the pedigrees. RESULTS: The unexpected antibodies all were negative in the family members. The novel RHD1058G>C allele was found in the proposita, her father, and grandfather. Five family members were detected serologically with the common Rh(D)-positive phenotypes either as homozygote of RHD/RHD or heterozygote of RHD/RHd. Two family members were detected as weak D phenotypes in accordance with the genotyping results by PCR-SSP, and both of them have a D1058Ce haplotype and a dce haplotype. One member, her father, was tested common Rh(D)-positive with D1058Ce haplotype and a Dce haplotype. CONCLUSIONS: These data allow us to describe the characteristics of the weak D phenotype with a novel c.RHD-1058G>C allele, which may be partial D and increase the risk of RHD alloantibody. The novel RHD1058G>C allele was inherited in three generations in a family rather than spontaneous mutation in an individual.

Organic Cocrystal Alloys: From Three Primary Colors to Continuously Tunable Emission and Applications on Optical Waveguides and Displays.

Multicolor luminescence of organic fluorescent materials is an essential part of lighting and optical communication. However, the conventional construction of a multicolor luminescence system based on integrating multiple organic fluorescent materials of a single emission band remains complicated and to be improved. Herein, organic alloys (OAs) capable of full-color emission are synthesized based on charge transfer (CT) cocrystals. By adjusting the molar ratio of electron donors, the emission color of the OAs can be conveniently and continuously regulated in a wide visible range from blue (CIE: 0.187, 0.277), to green (CIE: 0.301, 0.550), and to red (CIE: 0.561, 0.435). The OAs show analogous 1D morphology with smooth surface, allowing for full-color waveguides with low optical-loss coefficient. Impressively, full-color optical displays are easily achieved through the OAs system with continuous emission, which shows promising applications in the field of optical display and promotes the development of organic photonics.

[Development and exploration of the national first-class undergraduate course in "Enzyme Engineering"].

The biotechnology industry is a strategic emerging industry in our country, holding a crucial position in the national economy. The training of innovative high-quality professionals carries immense significance. As the cornerstone course in biotechnology, "Enzyme Engineering" directly impacts the students' caliber and industry development. This course aims to address pertinent issues present in the current curriculum delivery, such as inadequately optimized content, excessive dependency on textbooks, and reliance on monotonous teaching methods. By adjusting the course outline, updating the case material repository, and engaging students' enthusiasm, we developed a three-dimensional approach to instruct. This approach included a blend of online and offline components, interactive teaching through the flipped classroom methodology, heuristic teaching using problem-based learning (PBL) mode, and topic teaching via case studies. We also improved the assessment mechanism to stimulate students' enthusiasm for learning nurture their innovation capabilities. Our objective was to foster high-quality professionals with a robust foundation and practical expertise. Through teaching exploration and practice, we have witnessed significant improvement in both teaching efficacy and students' engineering practice and innovation abilities.