Biomass-based controllable morphology of carbon microspheres with multi-layer hollow structure for superior performance in supercapacitors.

The electrochemical properties of corn starch (CS)-based hydrothermal carbon microsphere (CMS) electrode materials for supercapacitor are closely related to their structures. Herein, cetyltrimethyl ammonium bromide (CTAB) was used as a soft template to form the corn starch (CS)-based carbon microspheres with radial hollow structure in the inner and middle layers by hydrothermal and sol-gel method. Due to the introduction of multi-layer hollow structure of carbon microsphere, more micropores were produced during CO2 activation, which increased the specific surface area and improved the capacitance performance. Compared to commercial activated carbon, the four different morphologies of corn starch CMS had better electrochemical performances. Consequently, the proposed CO2-(CTAB)-CS-CS exhibits a high discharge specific capacitance of 242.5F/g at 1 A/g in three-electrode system with 6 M KOH electrolyte, better than commercial activated carbon with 208.5F/g. Moreover, excellent stability is achieved for CO2-(CTAB)-CS-CS with approximately 97.14 % retention of the initial specific capacitance value after 10,000 cycles at a current density of 2 A/g, while the commercial activated carbon has 86.96 % retention. This implies that the corn starch-based multilayer hollow CMS could be a promising electrode material for high-performance supercapacitors.

FRESH™ 3D bioprinted cardiac tissue, a bioengineered platform for in vitro pharmacology.

There is critical need for a predictive model of human cardiac physiology in drug development to assess compound effects on human tissues. In vitro two-dimensional monolayer cultures of cardiomyocytes provide biochemical and cellular readouts, and in vivo animal models provide information on systemic cardiovascular response. However, there remains a significant gap in these models due to their incomplete recapitulation of adult human cardiovascular physiology. Recent efforts in developing in vitro models from engineered heart tissues have demonstrated potential for bridging this gap using human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) in three-dimensional tissue structure. Here, we advance this paradigm by implementing FRESH™ 3D bioprinting to build human cardiac tissues in a medium throughput, well-plate format with controlled tissue architecture, tailored cellular composition, and native-like physiological function, specifically in its drug response. We combined hiPSC-CMs, endothelial cells, and fibroblasts in a cellular bioink and FRESH™ 3D bioprinted this mixture in the format of a thin tissue strip stabilized on a tissue fixture. We show that cardiac tissues could be fabricated directly in a 24-well plate format were composed of dense and highly aligned hiPSC-CMs at >600 million cells/mL and, within 14 days, demonstrated reproducible calcium transients and a fast conduction velocity of ∼16 cm/s. Interrogation of these cardiac tissues with the ß-adrenergic receptor agonist isoproterenol showed responses consistent with positive chronotropy and inotropy. Treatment with calcium channel blocker verapamil demonstrated responses expected of hiPSC-CM derived cardiac tissues. These results confirm that FRESH™ 3D bioprinted cardiac tissues represent an in vitro platform that provides data on human physiological response.

Whole Landscape of the Origin and Evolution of Gassing in Supercapacitors at a High Voltage.

Although supercapacitors with acetonitrile-based electrolytes (AN-based SCs) have realized high-voltage (3.0 V) applications by manufacturers, gas generation at high voltages is a critical issue. Also, the exact origins and evolution mechanisms of gas generation during SC aging at 3.0 V still lack a whole landscape. In this work, floating tests under realistic working conditions are conducted by 22450-type cylindrical cells with an AN-based commercial electrolyte. Comprehensive insights into the origins and evolution mechanisms of gas species at 2.7 and 3.0 V are acquired, which involves multiple side reactions related to the electrode, current collector, and electrolyte. Both experimental evidence and density functional theory calculations demonstrate that the primary reasons for gas generation are residual water and oxygen-containing functional groups, especially hydroxyl and carboxyl. More importantly, additional types of gas (such as CO2, NH3, and alkenes) can only be detected at a higher voltage of 3.0 V rather than 2.7 V after failure, suggesting that these gas species can be regarded as the failure signatures at 3.0 V. This breakthrough analysis will provide fundamental guidance for failure evaluation and designing AN-based SCs with extended lifetime at 3.0 V.

High-Voltage Redox Mediator of an Organic Electrolyte for Supercapacitors by Lewis Base Electrocatalysis.

Redox electrolytes for supercapacitors (SCs) have recently sparked widespread interest. Due to the redox reactions within electrolytes, they can achieve high capacitance and long cycle stability. However, the energy density of SCs with redox electrolytes is limited by the narrow applied electrochemical window due to the irreversible side reaction of redox mediators at high potential. To overcome this issue, a redox mediator with a high redox potential, tetrachloridehydroquinone (TCHQ), is added to organic electrolytes to obtain a broad electrochemical window. TCHQ is designed to undergo a dehydrogenation reaction catalyzed by N-doped activated carbon to provide capacitance. The pyrrole N atoms have the highest electrocatalytic activity based on the theoretical calculation of reaction overpotential with predicted reaction pathways due to their Lewis basicity. Benefitting from that, TCHQ shows promising reversibility with a larger electrochemical window (up to 2.7 V). As a result, a higher energy density is obtained when compared to commercial SCs. This study proposes a strategy for designing redox mediators and interfaces of SCs with high energy density and a calculation method of dehydrogenation reaction electrocatalysis.

The development of a heterologous gene expression system in thermophilic fungus Thermoascus aurantiacus.

Thermoascus aurantiacus is a thermophilic fungus that belongs to the ascomycetous class and has attracted increasing interest for its ability to produce thermostable cellulolytic enzymes and growth at elevated temperatures. However, studies on this organism have been limited because of the lack of a genetic manipulation system. Here, we developed a polyethylene glycol (PEG)-mediated transformation system for T. aurantiacus based on an orotidine-5'-monophosphate decarboxylase (pyrG)-deficient mutant, with this method achieving a transformation efficiency of 33 ± 3 transformants per microgram of DNA. Intracellular or secretory expression of heterologous proteins, including green fluorescent protein, ß-galactosidase and α-amylase, in T. aurantiacus was successful under the inducible endogenous cellobiohydrolase and endoglucanase gene promoter or the constitutive heterologous pyruvate decarboxylase and enolase gene promoter from Trichoderma reesei. To the best of our knowledge, this is the first report on PEG-mediated transformation of T. aurantiacus, which sets the foundation for strain improvement for biotechnological applications and functional genomic studies. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s13205-021-02963-w.

Error removal in microchip-synthesized DNA using immobilized MutS.

The development of economical de novo gene synthesis methods using microchip-synthesized oligonucleotides has been limited by their high error rates. In this study, a low-cost, effective and improved-throughput (up to 32 oligos per run) error-removal method using an immobilized cellulose column containing the mismatch binding protein MutS was produced to generate high-quality DNA from oligos, particularly microchip-synthesized oligonucleotides. Error-containing DNA in the initial material was specifically retained on the MutS-immobilized cellulose column (MICC), and error-depleted DNA in the eluate was collected for downstream gene assembly. Significantly, this method improved a population of synthetic enhanced green fluorescent protein (720 bp) clones from 0.93% to 83.22%, corresponding to a decrease in the error frequency of synthetic gene from 11.44/kb to 0.46/kb. In addition, a parallel multiplex MICC error-removal strategy was also evaluated in assembling 11 genes encoding ∼21 kb of DNA from 893 oligos. The error frequency was reduced by 21.59-fold (from 14.25/kb to 0.66/kb), resulting in a 24.48-fold increase in the percentage of error-free assembled fragments (from 3.23% to 79.07%). Furthermore, the standard MICC error-removal process could be completed within 1.5 h at a cost as low as $0.374 per MICC.