Revisiting Fishery Sustainability Targets.

Density-dependent population dynamic models strongly influence many of the world's most important harvest policies. Nearly all classic models (e.g. Beverton-Holt and Ricker) recommend that managers maintain a population size of roughly 40-50 percent of carrying capacity to maximize sustainable harvest, no matter the species' population growth rate. Such insights are the foundational logic behind most sustainability targets and biomass reference points for fisheries. However, a simple, less-commonly used model, called the Hockey-Stick model, yields very different recommendations. We show that the optimal population size to maintain in this model, as a proportion of carrying capacity, is one over the population growth rate. This leads to more conservative optimal harvest policies for slow-growing species, compared to other models, if all models use the same growth rate and carrying capacity values. However, parameters typically are not fixed; they are estimated after model-fitting. If the Hockey-Stick model leads to lower estimates of carrying capacity than other models, then the Hockey-Stick policy could yield lower absolute population size targets in practice. Therefore, to better understand the population size targets that may be recommended across real fisheries, we fit the Hockey-Stick, Ricker and Beverton-Holt models to population time series data across 284 fished species from the RAM Stock Assessment database. We found that the Hockey-Stick model usually recommended fisheries maintain population sizes higher than all other models (in 69-81% of the data sets). Furthermore, in 77% of the datasets, the Hockey-Stick model recommended an optimal population target even higher than 60% of carrying capacity (a widely used target, thought to be conservative). However, there was considerable uncertainty in the model fitting. While Beverton-Holt fit several of the data sets best, Hockey-Stick also frequently fit similarly well. In general, the best-fitting model rarely had overwhelming support (a model probability of greater than 95% was achieved in less than five percent of the datasets). A computational experiment, where time series data were simulated from all three models, revealed that Beverton-Holt often fit best even when it was not the true model, suggesting that fisheries data are likely too small and too noisy to resolve uncertainties in the functional forms of density-dependent growth. Therefore, sustainability targets may warrant revisiting, especially for slow-growing species.

Incorporating uncertainty in Indigenous sea Country monitoring with Bayesian statistics: Towards more informed decision-making.

Partnerships in marine monitoring combining Traditional Ecological Knowledge and western science are developing globally to improve our understanding of temporal changes in ecological communities that better inform coastal management practices. A fuller communication between scientists and Indigenous partners about the limitations of monitoring results to identify change is essential to the impact of monitoring datasets on decision-making. Here we present a 5-year co-developed case study from a fish monitoring partnership in northwest Australia showing how uncertainty estimated by Bayesian models can be incorporated into monitoring management indicators. Our simulation approach revealed there was high uncertainty in detecting immediate change over the following monitoring year when translated to health performance indicators. Incorporating credibility estimates into health assessments added substantial information to monitoring trends, provided a deeper understanding of monitoring limitations and highlighted the importance of carefully selecting the way we evaluate management performance indicators.

Calibration of agent based models for monophasic and biphasic tumour growth using approximate Bayesian computation.

Agent-based models (ABMs) are readily used to capture the stochasticity in tumour evolution; however, these models are often challenging to validate with experimental measurements due to model complexity. The Voronoi cell-based model (VCBM) is an off-lattice agent-based model that captures individual cell shapes using a Voronoi tessellation and mimics the evolution of cancer cell proliferation and movement. Evidence suggests tumours can exhibit biphasic growth in vivo. To account for this phenomena, we extend the VCBM to capture the existence of two distinct growth phases. Prior work primarily focused on point estimation for the parameters without consideration of estimating uncertainty. In this paper, approximate Bayesian computation is employed to calibrate the model to in vivo measurements of breast, ovarian and pancreatic cancer. Our approach involves estimating the distribution of parameters that govern cancer cell proliferation and recovering outputs that match the experimental data. Our results show that the VCBM, and its biphasic extension, provides insight into tumour growth and quantifies uncertainty in the switching time between the two phases of the biphasic growth model. We find this approach enables precise estimates for the time taken for a daughter cell to become a mature cell. This allows us to propose future refinements to the model to improve accuracy, whilst also making conclusions about the differences in cancer cell characteristics.

Comparative Analysis of Vaccine Inequity and COVID-19 Transmission Amid the Omicron Variant Among Countries - Six Countries, Asia-Pacific Region, 2022.

What is already known about this topic?: The coronavirus disease 2019 (COVID-19) persists as a significant global public health crisis. The predominant strain, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), notably the Omicron variant, continues to undergo mutations. While vaccination is heralded as the paramount solution to cease the pandemic, challenges persist in providing equitable access to COVID-19 vaccines. What is added by this report?: The distribution of vaccine coverage exhibited disparities between high-income and middle-income countries, with middle-income countries evidencing lower levels of vaccination. The data further suggested that countries with lesser vaccination levels tended to display a higher case fatality rate. Findings indicated that an increase in population-wide vaccination was effective in mitigating COVID-19 related mortalities. What are the implications for public health practice?: The findings of this research underscore the pressing necessity for equitable access to vaccines to effectively mitigate the COVID-19 pandemic within the Asia-Pacific region.

Explainability of the COVID-19 epidemiological model with nonnegative tensor factorization.

The world is witnessing the devastating effects of the COVID-19 pandemic. Each country responded to contain the spread of the virus in the early stages through diverse response measures. Interpreting these responses and their patterns globally is essential to inform future responses to COVID-19 variants and future pandemics. A stochastic epidemiological model (SEM) is a well-established mathematical tool that helps to analyse the spread of infectious diseases through communities and the effects of various response measures. However, interpreting the outcome of these models is complex and often requires manual effort. In this paper, we propose a novel method to provide the explainability of an epidemiological model. We represent the output of SEM as a tensor model. We then apply nonnegative tensor factorization (NTF) to identify patterns of global response behaviours of countries and cluster the countries based on these patterns. We interpret the patterns and clusters to understand the global response behaviour of countries in the early stages of the pandemic. Our experimental results demonstrate the advantage of clustering using NTF and provide useful insights into the characteristics of country clusters.

Computationally efficient framework for diagnosing, understanding and predicting biphasic population growth.

Throughout the life sciences, biological populations undergo multiple phases of growth, often referred to as biphasic growth for the commonly encountered situation involving two phases. Biphasic population growth occurs over a massive range of spatial and temporal scales, ranging from microscopic growth of tumours over several days, to decades-long regrowth of corals in coral reefs that can extend for hundreds of kilometres. Different mathematical models and statistical methods are used to diagnose, understand and predict biphasic growth. Common approaches can lead to inaccurate predictions of future growth that may result in inappropriate management and intervention strategies being implemented. Here, we develop a very general computationally efficient framework, based on profile likelihood analysis, for diagnosing, understanding and predicting biphasic population growth. The two key components of the framework are as follows: (i) an efficient method to form approximate confidence intervals for the change point of the growth dynamics and model parameters and (ii) parameter-wise profile predictions that systematically reveal the influence of individual model parameters on predictions. To illustrate our framework we explore real-world case studies across the life sciences.

Parameter identifiability and model selection for sigmoid population growth models.

Sigmoid growth models, such as the logistic, Gompertz and Richards' models, are widely used to study population dynamics ranging from microscopic populations of cancer cells, to continental-scale human populations. Fundamental questions about model selection and parameter estimation are critical if these models are to be used to make practical inferences. However, the question of parameter identifiability - whether a data set contains sufficient information to give unique or sufficiently precise parameter estimates - is often overlooked. We use a profile-likelihood approach to explore practical parameter identifiability using data describing the re-growth of hard coral. With this approach, we explore the relationship between parameter identifiability and model misspecification, finding that the logistic growth model does not suffer identifiability issues for the type of data we consider whereas the Gompertz and Richards' models encounter practical non-identifiability issues. This analysis of parameter identifiability and model selection is important because different growth models are in biological modelling without necessarily considering whether parameters are identifiable. Standard practices that do not consider parameter identifiability can lead to unreliable or imprecise parameter estimates and potentially misleading mechanistic interpretations. For example, using the Gompertz model, the estimate of the time scale of coral re-growth is 625 days when we estimate the initial density from the data, whereas it is 1429 days using a more standard approach where variability in the initial density is ignored. While tools developed here focus on three standard sigmoid growth models only, our theoretical developments are applicable to any sigmoid growth model and any appropriate data set. MATLAB implementations of all software are available on GitHub.

Hindsight is 2020 vision: a characterisation of the global response to the COVID-19 pandemic.

BACKGROUND: The global impact of COVID-19 and the country-specific responses to the pandemic provide an unparalleled opportunity to learn about different patterns of the outbreak and interventions. We model the global pattern of reported COVID-19 cases during the primary response period, with the aim of learning from the past to prepare for the future. METHODS: Using Bayesian methods, we analyse the response to the COVID-19 outbreak for 158 countries for the period 22 January to 9 June 2020. This encompasses the period in which many countries imposed a variety of response measures and initial relaxation strategies. Instead of modelling specific intervention types and timings for each country explicitly, we adopt a stochastic epidemiological model including a feedback mechanism on virus transmission to capture complex nonlinear dynamics arising from continuous changes in community behaviour in response to rising case numbers. We analyse the overall effect of interventions and community responses across diverse regions. This approach mitigates explicit consideration of issues such as period of infectivity and public adherence to government restrictions. RESULTS: Countries with the largest cumulative case tallies are characterised by a delayed response, whereas countries that avoid substantial community transmission during the period of study responded quickly. Countries that recovered rapidly also have a higher case identification rate and small numbers of undocumented community transmission at the early stages of the outbreak. We also demonstrate that uncertainty in numbers of undocumented infections dramatically impacts the risk of multiple waves. Our approach is also effective at pre-empting potential flare-ups. CONCLUSIONS: We demonstrate the utility of modelling to interpret community behaviour in the early epidemic stages. Two lessons learnt that are important for the future are: i) countries that imposed strict containment measures early in the epidemic fared better with respect to numbers of reported cases; and ii) broader testing is required early in the epidemic to understand the magnitude of undocumented infections and recover rapidly. We conclude that clear patterns of containment are essential prior to relaxation of restrictions and show that modelling can provide insights to this end.

Identifiability analysis for stochastic differential equation models in systems biology.

Mathematical models are routinely calibrated to experimental data, with goals ranging from building predictive models to quantifying parameters that cannot be measured. Whether or not reliable parameter estimates are obtainable from the available data can easily be overlooked. Such issues of parameter identifiability have important ramifications for both the predictive power of a model, and the mechanistic insight that can be obtained. Identifiability analysis is well-established for deterministic, ordinary differential equation (ODE) models, but there are no commonly adopted methods for analysing identifiability in stochastic models. We provide an accessible introduction to identifiability analysis and demonstrate how existing ideas for analysis of ODE models can be applied to stochastic differential equation (SDE) models through four practical case studies. To assess structural identifiability, we study ODEs that describe the statistical moments of the stochastic process using open-source software tools. Using practically motivated synthetic data and Markov chain Monte Carlo methods, we assess parameter identifiability in the context of available data. Our analysis shows that SDE models can often extract more information about parameters than deterministic descriptions. All code used to perform the analysis is available on Github.

A practical guide to pseudo-marginal methods for computational inference in systems biology.

For many stochastic models of interest in systems biology, such as those describing biochemical reaction networks, exact quantification of parameter uncertainty through statistical inference is intractable. Likelihood-free computational inference techniques enable parameter inference when the likelihood function for the model is intractable but the generation of many sample paths is feasible through stochastic simulation of the forward problem. The most common likelihood-free method in systems biology is approximate Bayesian computation that accepts parameters that result in low discrepancy between stochastic simulations and measured data. However, it can be difficult to assess how the accuracy of the resulting inferences are affected by the choice of acceptance threshold and discrepancy function. The pseudo-marginal approach is an alternative likelihood-free inference method that utilises a Monte Carlo estimate of the likelihood function. This approach has several advantages, particularly in the context of noisy, partially observed, time-course data typical in biochemical reaction network studies. Specifically, the pseudo-marginal approach facilitates exact inference and uncertainty quantification, and may be efficiently combined with particle filters for low variance, high-accuracy likelihood estimation. In this review, we provide a practical introduction to the pseudo-marginal approach using inference for biochemical reaction networks as a series of case studies. Implementations of key algorithms and examples are provided using the Julia programming language; a high performance, open source programming language for scientific computing (https://github.com/davidwarne/Warne2019_GuideToPseudoMarginal).

Simulation and inference algorithms for stochastic biochemical reaction networks: from basic concepts to state-of-the-art.

Stochasticity is a key characteristic of intracellular processes such as gene regulation and chemical signalling. Therefore, characterizing stochastic effects in biochemical systems is essential to understand the complex dynamics of living things. Mathematical idealizations of biochemically reacting systems must be able to capture stochastic phenomena. While robust theory exists to describe such stochastic models, the computational challenges in exploring these models can be a significant burden in practice since realistic models are analytically intractable. Determining the expected behaviour and variability of a stochastic biochemical reaction network requires many probabilistic simulations of its evolution. Using a biochemical reaction network model to assist in the interpretation of time-course data from a biological experiment is an even greater challenge due to the intractability of the likelihood function for determining observation probabilities. These computational challenges have been subjects of active research for over four decades. In this review, we present an accessible discussion of the major historical developments and state-of-the-art computational techniques relevant to simulation and inference problems for stochastic biochemical reaction network models. Detailed algorithms for particularly important methods are described and complemented with Matlab® implementations. As a result, this review provides a practical and accessible introduction to computational methods for stochastic models within the life sciences community.

Using Experimental Data and Information Criteria to Guide Model Selection for Reaction-Diffusion Problems in Mathematical Biology.

Reaction-diffusion models describing the movement, reproduction and death of individuals within a population are key mathematical modelling tools with widespread applications in mathematical biology. A diverse range of such continuum models have been applied in various biological contexts by choosing different flux and source terms in the reaction-diffusion framework. For example, to describe the collective spreading of cell populations, the flux term may be chosen to reflect various movement mechanisms, such as random motion (diffusion), adhesion, haptotaxis, chemokinesis and chemotaxis. The choice of flux terms in specific applications, such as wound healing, is usually made heuristically, and rarely it is tested quantitatively against detailed cell density data. More generally, in mathematical biology, the questions of model validation and model selection have not received the same attention as the questions of model development and model analysis. Many studies do not consider model validation or model selection, and those that do often base the selection of the model on residual error criteria after model calibration is performed using nonlinear regression techniques. In this work, we present a model selection case study, in the context of cell invasion, with a very detailed experimental data set. Using Bayesian analysis and information criteria, we demonstrate that model selection and model validation should account for both residual errors and model complexity. These considerations are often overlooked in the mathematical biology literature. The results we present here provide a straightforward methodology that can be used to guide model selection across a range of applications. Furthermore, the case study we present provides a clear example where neglecting the role of model complexity can give rise to misleading outcomes.

Optimal Quantification of Contact Inhibition in Cell Populations.

Contact inhibition refers to a reduction in the rate of cell migration and/or cell proliferation in regions of high cell density. Under normal conditions, contact inhibition is associated with the proper functioning tissues, whereas abnormal regulation of contact inhibition is associated with pathological conditions, such as tumor spreading. Unfortunately, standard mathematical modeling practices mask the importance of parameters that control contact inhibition through scaling arguments. Furthermore, standard experimental protocols are insufficient to quantify the effects of contact inhibition because they focus on data describing early time, low-density dynamics only. Here we use the logistic growth equation as a caricature model of contact inhibition to make recommendations as to how to best mitigate these issues. Taking a Bayesian approach, we quantify the trade off between different features of experimental design and estimates of parameter uncertainty so that we can reformulate a standard cell proliferation assay to provide estimates of both the low-density intrinsic growth rate, λ, and the carrying capacity density, K, which is a measure of contact inhibition.