How to register static occlusion - Correlation of contemporary techniques.

Statement of problem: A working knowledge of the analytical capacities of contemporary registration methods is essential for prosthetic treatment; however, there is a paucity of studies which coherently investigate the capabilities and limitations of the various diagnostic procedures utilized for prosthetic occlusion. Purpose: The present prospective clinical study aimed to evaluate the similarities and differences among contemporary registration methods through comparative analysis. Material and methods: The habitual static occlusion of 19 healthy individuals (14 women; mean age ± standard deviation, 30.8 ± 4.8 years) was analyzed 3 times a day, using shimstock foil, occlusal foil, wax registration, silicone registration, and computerized registration. The procedures were repeated after 14 days. Statistical analyses included all registrations referencing the first measurement point to assess the mean values of antagonistic contacts and the differences between these measurements. Pearson's and Kendall's correlation analyses were performed as part of the coherent mixed logistic regression model, and marginal probabilities were calculated using the registration technique and repeated measurements. Results: Strong correlations were found among the various registration techniques. The largest effect sizes were observed among the wax, silicone, occlusion foil, and computerized registrations (r = 0.95, P < 0.001 to r = 0.62, P < 0.001), while the lowest effect sizes were found for shimstock correlations (τ = 0.41, P < 0.001 to τ = 0.27, P < 0.001). Occlusal changes per maxillary arch were observed referencing the first measurement time with wax registration (P < 0.001; 7.4%), shimstock foil (P < 0.001; 13.8%), computerized registration (P < 0.001; 20.3%), silicone registration (P = 0.009; 66.3%), and occlusion foil (P < 0.001; 98.8%). Occlusal changes per maxillary tooth were observed from the first incisor (P < 0.001; 5.7%) to the third molar (P < 0.001; 18.1%). Conclusions: The results of the present study revealed that there are strong overall correlations among the various contemporary registration techniques. The different affinities of the techniques used to register occlusal changes, however, showed differences in the measurement techniques, which should be neither over- nor underestimated. The differential tendencies of teeth to change should be considered, even if a hypervariable system is assumed.

Antibacterial coating of orthodontic elastomeric ligatures with silver and bismuth nanofilms by magnetron sputtering: A feasibility study.

OBJECTIVES: Magnetron sputtering was evaluated to equip surfaces of orthodontic elastomeric ligatures with silver and bismuth nanofilms. MATERIAL AND METHODS: Antibacterial properties were evaluated by the adhesion of Streptococcus mutans. Polyurethane-based elastomeric ligatures were coated with silver and bismuth nanofilms via direct current magnetron sputtering. Surface roughness (Ra ) and surface-free energy (SFE) were assessed. Coated specimens were incubated with S. mutans for 2 h. Adhering bacteria were visualized by Hoechst staining and quantified by an ATP-based luminescence assay. One-way analysis of variance with Tukey post hoc testing and Pearson correlation analysis were performed (p < .05) to relate bacterial adhesion to surface roughness and surface-free energy. RESULTS: Elastomeric ligatures were successfully coated with silver and bismuth nanofilms. Ra was significantly reduced by silver coating. Silver and bismuth coatings showed significantly higher SFE than controls. Adhesion of S. mutans was significantly decreased by silver coating. No correlation between bacterial adhesion and SFE was found. Correlation between bacterial adhesion and Ra was positive but not statistically significant. CONCLUSIONS: Magnetron sputtering proved to be a feasible method to equip orthodontic elastomeric ligatures with silver and bismuth nanofilms. Silver coatings of elastomeric ligatures may reduce white spots and carious lesions in orthodontic patients. Future research is required to stabilize coatings.

Use of Multiple-Select Multiple-Choice Items in a Dental Undergraduate Curriculum: Retrospective Study Involving the Application of Different Scoring Methods.

BACKGROUND: Scoring and awarding credit are more complex for multiple-select items than for single-choice items. Forty-one different scoring methods were retrospectively applied to 2 multiple-select multiple-choice item types (Pick-N and Multiple-True-False [MTF]) from existing examination data. OBJECTIVE: This study aimed to calculate and compare the mean scores for both item types by applying different scoring methods, and to investigate the effect of item quality on mean raw scores and the likelihood of resulting scores at or above the pass level (≥0.6). METHODS: Items and responses from examinees (ie, marking events) were retrieved from previous examinations. Different scoring methods were retrospectively applied to the existing examination data to calculate corresponding examination scores. In addition, item quality was assessed using a validated checklist. Statistical analysis was performed using the Kruskal-Wallis test, Wilcoxon rank-sum test, and multiple logistic regression analysis (P<.05). RESULTS: We analyzed 1931 marking events of 48 Pick-N items and 828 marking events of 18 MTF items. For both item types, scoring results widely differed between scoring methods (minimum: 0.02, maximum: 0.98; P<.001). Both the use of an inappropriate item type (34 items) and the presence of cues (30 items) impacted the scoring results. Inappropriately used Pick-N items resulted in lower mean raw scores (0.88 vs 0.93; P<.001), while inappropriately used MTF items resulted in higher mean raw scores (0.88 vs 0.85; P=.001). Mean raw scores were higher for MTF items with cues than for those without cues (0.91 vs 0.8; P<.001), while mean raw scores for Pick-N items with and without cues did not differ (0.89 vs 0.90; P=.09). Item quality also impacted the likelihood of resulting scores at or above the pass level (odds ratio ≤6.977). CONCLUSIONS: Educators should pay attention when using multiple-select multiple-choice items and select the most appropriate item type. Different item types, different scoring methods, and presence of cues are likely to impact examinees' scores and overall examination results.

In Vivo Biofilm Formation on Novel PEEK, Titanium, and Zirconia Implant Abutment Materials.

The formation of biofilms on the surface of dental implants and abutment materials may lead to peri-implantitis and subsequent implant failure. Recently, innovative materials such as polyether-ether-ketone (PEEK) and its modifications have been used as abutment materials. However, there is limited knowledge on microbial adhesion to PEEK materials. The aim of this in vivo study was to investigate biofilm formation on the surface of conventional (titanium and zirconia) and PEEK implant abutment materials. Split specimens of titanium, zirconia, PEEK, and modified PEEK (PEEK-BioHPP) were manufactured, mounted in individual removable acrylic upper jaw splints, and worn by 20 healthy volunteers for 24 h. The surface roughness was determined using widefield confocal microscopy. Biofilm accumulation was investigated by fluorescence microscopy and quantified by imaging software. The surface roughness of the investigated materials was <0.2 µm and showed no significant differences between the materials. Zirconia showed the lowest biofilm formation, followed by titanium, PEEK, and PEEK-BioHPP. Differences were significant (p < 0.001) between the investigated materials, except for the polyether-ether-ketones. Generally, biofilm formation was significantly higher (p < 0.05) in the posterior region of the oral cavity than in the anterior region. The results of the present study show a material-dependent susceptibility to biofilm formation. The risk of developing peri-implantitis may be reduced by a specific choice of abutment material.

A Pilot Study on Monomer and Bisphenol A (BPA) Release from UDMA-Based and Conventional Indirect Veneering Composites.

This study aimed to investigate the release of common monomers from conventional (Dialog Vario, Enamel Plus HFO) and UDMA-based indirect veneering composites (VITA VM LC, GC Gradia). Ten cylindrical samples of each material were prepared (n = 40), immersed in HPLC grade water, and incubated for 24 h in an incubation shaker at 37 °C and 112 rpm. Extraction was performed following ISO 10993-12 and monomers were detected and quantified by HPLC-MS/MS. In all the samples, urethane dimethacrylate (UDMA) and bisphenol A (BPA) were quantifiable. Compared to water blanks, BPA levels were only elevated in the eluates from conventional composites. In all other samples, concentrations were in the range of extraneous BPA and were therefore clinically irrelevant. Low concentrations of Bisphenol A-glycidyl methacrylate (BisGMA) were found in one BPA-free composite and in both conventional materials. Statistical analyses showed that BPA-free materials released significantly less BisGMA and no BPA, while UDMA elution was comparable to elution from conventional materials. All measured concentrations were below reported effective cytotoxic concentrations. Considering these results, the substitution of BPA-derivatives with UDMA might be beneficial since BPA-associated adverse effects are ruled out. Further studies should be enrolled to test the biocompatibility of UDMA on cells of the oral environment.

Time of day-dependent deviations in dynamic and static occlusion: A prospective clinical study.

STATEMENT OF PROBLEM: The registration of dental occlusion is essential for prosthodontic treatment. However, studies on time-dependent changes of static and dynamic occlusion that may affect definitive restorations are lacking. PURPOSE: The purpose of this prospective clinical study was to use conventional and digital occlusal registration techniques to evaluate time-dependent fluctuations in static and dynamic occlusion. MATERIAL AND METHODS: The static and dynamic occlusion of 19 healthy individuals (14 women and 5 men with a mean ±standard deviation age of 30.8 ±4.8 years) was examined 3 times a day using occlusal foil (12-µm occlusion foil) and a digital sensor (T-Scan III). The procedure was repeated after 14 days. The statistical analysis covered all registrations referencing the first measurement point to assess occurring differences, and changes per tooth and arch were determined (α=.05). Potential influencing factors were calculated by using mixed logistic regression. Marginal probabilities were calculated considering the registration technique and the time of measurement. RESULTS: Significant differences were found between registered occlusal patterns and the different registration techniques. Occlusal changes per maxillary dental arch were observed with static foil registration (P<.001; 98.8%), left laterotrusion foil registration (P=.001; 29.6%), right laterotrusion foil registration (P=.001; 29.6%), static sensor registration (P<.001; 20.3%), left laterotrusion sensor registration (P=.001; 71.7%), and right laterotrusion sensor registration (P=.005; 67.7%). None of the techniques showed higher probabilities of occlusal changes at a given time of day with respect to time-dependent changes. CONCLUSIONS: The study revealed that occlusion cannot be considered constant and that the topography and intensity of the contact points vary. Circadian occlusion variance can be assumed without preferring a specific time of the day. This differentiated view of occlusion as a changing system helps to clarify the challenge of dental restorations for both the patient and the practitioner.

Changes in Maximum Mandibular Mobility Due to Splint Therapy in Patients with Temporomandibular Disorders.

Splint therapy is widely used in the treatment of myofascial pain, but valid studies on the efficacy of this therapy are rare. The purpose of the present study was to investigate which qualifiable and quantifiable effects of splint therapy are detectable. For this purpose, 29 patients (21 women, mean age 44.6 ± 16 years) diagnosed with myofascial pain (RDC/TMD) were investigated in this prospective clinical trial (10/6/14An). Patients were treated with Michigan splints applied overnight for three months. Before (T1) and after three months of treatment (T2), patients were registered with an electronic ultrasound device with qualitative and quantitative evaluation of the registrations and a qualitative assessment of pain symptoms using a verbal analog scale. Significant differences were found between maximum mouth opening (MMP) (p < 0.001) and right condylar movement (CM) at MMP (p = 0.045). Qualitative assessment revealed that 24 of 29 patients experienced an improvement in pain symptoms, 17 of whom experienced complete remission. The results of the qualitative and quantitative analysis provide indications of the effectiveness of the splint therapy. In addition to quantitative measurements, the ultrasound facebow technique was also able to provide qualitative information.

Cytotoxicity of 3D-printed, milled, and conventional oral splint resins to L929 cells and human gingival fibroblasts.

OBJECTIVES: Evidence on the biocompatibility of three-dimensional (3D)-printed and milled resins for oral splints is limited. This in vitro study assessed the influence of the manufacturing method on the cytotoxicity of oral splint resins on L929 cells and human gingival fibroblasts (GF1). MATERIALS AND METHODS: Standardized specimens of four 3D-printed, two-milled, one-thermoformed, and one-pressed splint resin were incubated with L929 and GF1 cells for 24 h. Immunofluorescence and WST-8 assay were performed to evaluate cytotoxic effects. One-way analysis of variance and Tukey's multiple comparison test were applied with the variables "splint resin" and "manufacturing method" (p < .05). RESULTS: Immunofluorescence showed attachment of L929 and GF1 cells to the splint resins. Irrespective of the manufacturing method, the WST-8 assay revealed significant differences between splint resins for the viability of L929 and GF1 cells. L929 cells generally showed lower viability rates than GF1 cells. The evaluation of cell viability by the manufacturing method showed no significant differences between 3D printing, milling, and conventional methods. CONCLUSIONS: The cytotoxic effects of 3D-printed, milled, and conventional oral splint resins were similar, indicating minor influence of the manufacturing method on biocompatibility. Cytotoxicity of the resins was below a critical threshold in GF1 cells. The chemical composition might be more crucial than the manufacturing method for the biocompatibility of splint resins.

Prospective clinical evaluation of chairside-fabricated zirconia-reinforced lithium silicate ceramic partial crowns-5-year results.

OBJECTIVES: A university-based randomized clinical study evaluated the 5-year performance of chairside-fabricated zirconia-reinforced lithium silicate (ZLS)-ceramic partial crowns. MATERIAL AND METHODS: Forty-five patients were restored with 61 chairside-fabricated ZLS-restorations (Cerec SW 4.2, Dentsply Sirona, Germany; Vita Suprinity, Vita Zahnfabrik, Germany). Deviating from the manufacturers' recommendations, restorations with reduced minimum material thicknesses (MMT) were fabricated: group 1, MMT = 0.5-0.74 mm (n = 31); group 2, MMT = 0.75-1.0 mm (n = 30). For luting, a self-adhesive cement (SAC) or a total-etch technique with a composite cement (TEC) was applied. Statistical evaluation was performed by time-to-event analysis (Kaplan-Meier). Possible covariates of the survival (SVR) and success rates (SCR), evaluated in a Cox regression model, were MMT, restoration position (premolar/molar), and cementation technique (SAC vs. TEC). RESULTS: Forty patients (54 restorations, premolars, n = 23; molars, n = 31) participated in the 5-year follow-up. Five losses due to ceramic fractures occurred in group 1 (n = 28) (SVR: 83.0% [95% confidence interval (CI): 0.71-0.96]). Group 2 (n = 26) showed no losses (SVR: 100%). The success rate for partial crowns placed on premolars was 100% and 69% (95% CI: 0.54-0.84) for molar restorations. Recementation was required in 4 restorations with SAC (SCR: 86% [95% CI: 0.73-0.99]; SCR-DC: 100%). Restorations in group 2 showed a significantly reduced risk of material fracture hazard ratio (HR) = 0.09, p = 0.0292) compared with the restorations in group 1. Molar partial crowns showed an increased risk for a clinical intervention (HR = 5.26, p = 0.0222) compared to premolar restorations. CONCLUSIONS: Material thickness and position of the restoration are risk factors influencing the survival and success rate of ZLS-ceramic partial crowns. CLINICAL RELEVANCE: Observation of an MMT of at least 0.75-1.0 mm for ZLS-ceramics is essential to avoid material-related fractures. CLINICAL TRIAL REGISTRATION: German Clinical Trails Register (trial number: DRKS00005611).

Influence of the Manufacturing Method on the Adhesion of Candida albicans and Streptococcus mutans to Oral Splint Resins.

Microbial adhesion to oral splints may lead to oral diseases such as candidiasis, periodontitis or caries. The present in vitro study aimed to assess the effect of novel computer-aided design/computer-aided manufacturing (CAD/CAM) and conventional manufacturing on Candida albicans and Streptococcus mutans adhesion to oral splint resins. Standardized specimens of four 3D-printed, two milled, one thermoformed and one pressed splint resin were assessed for surface roughness by widefield confocal microscopy and for surface free energy by contact angle measurements. Specimens were incubated with C. albicans or S. mutans for two hours; a luminometric ATP assay was performed for the quantification of fungal and bacterial adhesion. Both one-way ANOVA with Tukey post hoc testing and Pearson correlation analysis were performed (p < 0.05) in order to relate manufacturing methods, surface roughness and surface free energy to microbial adhesion. Three-dimensional printing and milling were associated with increased adhesion of C. albicans compared to conventional thermoforming and pressing, while the S. mutans adhesion was not affected. Surface roughness and surface free energy showed no significant correlation with microbial adhesion. Increased fungal adhesion to oral splints manufactured by 3D printing or milling may be relevant for medically compromised patients with an enhanced risk for developing candidiasis.

Biomechanical analysis of temporomandibular joint dynamics based on real-time magnetic resonance imaging.

AIM: The traditional hinge axis theory of temporomandibular joint (TMJ) dynamics is increasingly being replaced by the theory of instantaneous centers of rotation (ICR). Typically, ICR determinations are based on theoretical calculations or three-dimensional approximations of finite element models. MATERIALS AND METHODS: With the advent of real-time magnetic resonance imaging (MRI), natural physiologic movements of the TMJ may be visualized with 15 frames per second. The present study employs real-time MRI to analyze the TMJ biomechanics of healthy volunteers during mandibular movements, with a special emphasis on horizontal condylar inclination (HCI) and ICR pathways. The Wilcoxon rank sum test was used to comparatively analyze ICR pathways of mandibular opening and closure. RESULTS: Mean HCI was 34.8 degrees (± 11.3 degrees) and mean mandibular rotation was 26.6 degrees (± 7.2 degrees). Within a mandibular motion of 10 to 30 degrees, the resulting x- and y-translation during opening and closure of the mandible differed significantly (10 to 20 degrees, x: P = 0.02 and y: P < 0.01; 20 to 30 degrees, x: P < 0.001 and y: P = 0.01). Rotation of both 0 to 10 degrees and > 30 degrees showed no significant differences in x- and y-translation. Near occlusion movements differed only for y-translation (P < 0.01). CONCLUSION: Real-time MRI facilitates the direct recording of TMJ structures during physiologic mandibular movements. The present findings support the theory of ICR. Statistics confirmed that opening and closure of the mandible follow different ICR pathways, which might be due to muscular activity discrepancies during different movement directions. ICR pathways were similar within maximum interincisal distance (MID) and near occlusion (NO), which might be explained by limited extensibility of tissue fibers (MID) and tooth contact (NO), respectively.

Intraoral sensor-based monitoring of stabilization splint therapy in patients with myofascial pain.

AIM: The present study aimed to evaluate intraoral microsensors for the objective measurement of patient compliance during splint therapy and to comparatively analyze the duration of mandibular and maxillary splint application in patients with myofascial pain. MATERIALS AND METHODS: Thirty-two patients with sole myofascial pain without limited opening (Research Diagnostic Criteria for Temporomandibular Disorders [RDC/TMD] Ia) were divided into two groups. To ensure patient comparability, all pressure-sensitive sites from the initial palpation were summarized as pain scores. The subjects in group 1 were treated with maxillary stabilization splints, and those in group 2 with mandibular stabilization splints. All splints were equipped with a microsensor without interfering static or dynamic occlusion. Wear pattern was recorded at three intervals of 30 days each. Following the observation period, the data were retrieved and statistically evaluated using multi-factor analysis of variance (ANOVA) and the Bland-Altman analysis. RESULTS: During the observation period, maxillary splints were applied in 44.4% and mandibular splints in 44.2% of the days. Regarding patient compliance, there was no significant difference between the maxillary and mandibular splints (P = 0.359). Patients with an increased pain score (P < 0.0001) and female patients (P = 0.013) wore their splints significantly more often. The wear time decreased over the observation period, whereas only the initial and terminal interval differed significantly across both the mandibular and maxillary splint groups (P < 0.0001). CONCLUSION: The microsensor used in the present study was an effective and reliable tool for monitoring patient compliance in patients with temporomandibular disorders (TMD). This method also allows for the reliable recording of intraoral splint application prior to the required bite elevations. The two types of splints analyzed in the present study had no significant influence on compliance.

The antimicrobial and cytotoxic effects of a copper-loaded zinc oxide phosphate cement.

OBJECTIVES: Evidence about modifications of dental luting materials to minimize biological failure at the "marginal gap" between teeth and fixed prosthodontics is scarce. We compared a copper-modified (Co-ZOP) and a conventional zinc oxide phosphate cement (ZOP) in terms of antimicrobial and cytotoxic potentials in vitro and in vivo. MATERIALS AND METHODS: Specimens of ZOP and Co-ZOP were characterized by the mean arithmetic roughness (Ra) and surface free energy (SFE). Powder components were examined using scanning electron microscopy (SEM). Energy-dispersive X-ray spectroscopy (EDX) showed elemental material compositions. In vitro microbial adhesion was shown using SEM, luminescence, and fluorescence assays. CCK-8 assays of mouse fibroblasts (L929) and human gingival fibroblasts (GF-1) were performed after 6, 24, and 48 h of specimen incubation. In vivo, ZOP and Co-ZOP specimens were applied intraorally for 12 h; biofilm accumulation was shown using SEM. RESULTS: Ra of ZOP and Co-ZOP showed no significant differences; SFE was significantly higher for Co-ZOP. EDX exhibited minor copper radiation for Co-ZOP, none for ZOP. In vitro fungal adhesion to Co-ZOP was significantly higher than to ZOP; in vitro streptococcal adhesion, cytotoxicity, and in vivo biofilm formation were not significantly different. CONCLUSIONS: Co-ZOP showed low surface allocations of copper with no improved antimicrobial properties compared with conventional ZOP in vitro or in vivo. CLINICAL RELEVANCE: Antimicrobial effects and low cytotoxicity of biomaterials are important for the clinical outcome. Based on our in vitro and in vivo results, no clinical recommendation can be given for the tested Co-ZOP.

Effectiveness of a universal adhesive for repair bonding to composite and amalgam.

The study aimed to compare the repair bond strength of aged composite and amalgam repaired with resin composite after various mechanical and adhesive surface treatments. Specimens were aged by thermal cycling (10,000 cycles, 5-55°C) and randomly subjected to one of three surface treatments: diamond bur abrasion, aluminum oxide air abrasion, or silica coating. Conventional bonding or a universal adhesive with incorporated silane was applied afterward (each n = 16) and resin composite was attached. In the control groups (each n = 16), resin composite was attached using one of the above adhesives without prior mechanical surface conditioning. After further thermal cycling, the shear bond strength (SBS) and failure modes were assessed. Statistical analyses were performed using ANOVA, Weibull statistics, two sample t-tests, and Chi2-test (P < 0.05). The SBS of the repaired amalgam was significantly lower than that of the composite and mechanical pretreatment significantly increased SBS. The universal adhesive significantly improved the SBS of the repaired amalgam compared to the conventional bonding agent and mechanical pretreatment increased the number of cohesive/mixed failures. Amalgam restorations may be repaired using resin composites, but the resulting SBS is lower than that obtained with composite.

Diagnosis of disk displacement using real-time MRI: Clinical report of two patients.

The clinical application of real-time magnetic resonance imaging (MRI) for the diagnosis of temporomandibular joint disk displacement (DD) with and without reduction is presented. In 2 patients with presumed DD, real-time MRI at 15 frames per second was performed during the natural opening and closing of the mouth. In one patient unilateral DD with reduction and in the other patient bilateral DD without reduction were observed. In contrast with conventional static MRI, real-time MRI moving images of temporomandibular joint DD offer comprehensive information about the dynamics of all involved structures, which in turn promises more reliable diagnoses. Real-time MRI is more rapid, more reliable, more informative, and less stressful for patients with temporomandibular disorders (TMDs).

The influence of surface texture and wettability on initial bacterial adhesion on titanium and zirconium oxide dental implants.

BACKGROUND: This study aims to investigate bacterial adhesion on different titanium and ceramic implant surfaces, to correlate these findings with surface roughness and surface hydrophobicity, and to define the predominant factor for bacterial adhesion for each material. METHODS: Zirconia and titanium specimens with different surface textures and wettability (5.0 mm in diameter, 1.0 mm in height) were prepared. Surface roughness was measured by perthometer (R a ) and atomic force microscopy, and hydrophobicity according to contact angles by computerized image analysis. Bacterial suspensions of Streptococcus sanguinis and Staphylococcus epidermidis were incubated for 2 h at 37 °C with ten test specimens for each material group and quantified with fluorescence dye CytoX-Violet and an automated multi-detection reader. RESULTS: Variations in surface roughness (R a ) did not lead to any differences in adhering S. epidermidis, but higher R a resulted in increased S. sanguinis adhesion. In contrast, higher bacterial adhesion was observed on hydrophobic surfaces than on hydrophilic surfaces for S. epidermidis but not for S. sanguinis. The potential to adhere S. sanguinis was significantly higher on ceramic surfaces than on titanium surfaces; no such preference could be found for S. epidermidis. CONCLUSIONS: Both surface roughness and wettability may influence the adhesion properties of bacteria on biomaterials; in this context, the predominant factor is dependent on the bacterial species. Wettability was the predominant factor for S. epidermidis and surface texture for S. sanguinis. Zirconia did not show any lower bacterial colonization potential than titanium. Arithmetical mean roughness values R a (measured by stylus profilometer) are inadequate for describing surface roughness with regard to its potential influence on microbial adhesion.

Real-time MRI of the temporomandibular joint at 15 frames per second-A feasibility study.

The purpose of this study was to develop and evaluate a novel method for real-time MRI of TMJ function at high temporal resolution and with two different contrasts. Real-time MRI was based on undersampled radial fast low angle shot (FLASH) acquisitions with iterative image reconstruction by regularized nonlinear inversion. Real-time MRI movies with T1 contrast were obtained with use of a radiofrequency-spoiled FLASH sequence, while movies with T2/T1 contrast employed a gradient-refocused FLASH version. TMJ function was characterized in 40 randomly selected volunteers by sequential 20s acquisitions of both the right and left joint during voluntary opening and closing of the mouth (in a medial, central and lateral oblique sagittal section perpendicular to the long axis of the condylar head). All studies were performed on a commercial MRI system at 3T using the standard head coil, while online reconstruction was achieved with a bypass computer fully integrated into the MRI system. As a first result, real-time MRI studies of the right and left TMJ were successfully performed in all 40 subjects (80 joints) within a total examination time per subject of only 15min. Secondly, at an in-plane resolution of 0.75mm and 5mm section thickness, the achieved temporal resolution was 66.7ms per image or 15 frames per second. Thirdly, both T1-weighted and T2/T1-weighted real-time MRI movies provided information about TMJ function such as disc position, condyle mobility and disc-condyle relationship. While T1 contrast offers a better delineation of structures during rapid jaw movements, T2/T1 contrast was rated superior for characterizing the articular disc. In conclusion, the proposed real-time MRI method may become a robust and efficient tool for the clinical assessment of TMJ function.

Assessment formats in dental medicine: An overview.

AIM: At the annual meeting of German dentists in Frankfurt am Main in 2013, the Working Group for the Advancement of Dental Education (AKWLZ) initiated an interdisciplinary working group to address assessments in dental education. This paper presents an overview of the current work being done by this working group, some of whose members are also actively involved in the German Association for Medical Education's (GMA) working group for dental education. The aim is to present a summary of the current state of research on this topic for all those who participate in the design, administration and evaluation of university-specific assessments in dentistry. METHOD: Based on systematic literature research, the testing scenarios listed in the National Competency-based Catalogue of Learning Objectives (NKLZ) have been compiled and presented in tables according to assessment value. RESULTS: Different assessment scenarios are described briefly in table form addressing validity (V), reliability (R), acceptance (A), cost (C), feasibility (F), and the influence on teaching and learning (EI) as presented in the current literature. Infoboxes were deliberately chosen to allow readers quick access to the information and to facilitate comparisons between the various assessment formats. Following each description is a list summarizing the uses in dental and medical education. CONCLUSION: This overview provides a summary of competency-based testing formats. It is meant to have a formative effect on dental and medical schools and provide support for developing workplace-based strategies in dental education for learning, teaching and testing in the future.