Dysregulated dendritic cells in sepsis: functional impairment and regulated cell death.

Sepsis is defined as life-threatening organ dysfunction caused by a dysregulated host response to infection. Studies have indicated that immune dysfunction plays a central role in the pathogenesis of sepsis. Dendritic cells (DCs) play a crucial role in the emergence of immune dysfunction in sepsis. The major manifestations of DCs in the septic state are abnormal functions and depletion in numbers, which are linked to higher mortality and vulnerability to secondary infections in sepsis. Apoptosis is the most widely studied pathway of number reduction in DCs. In the past few years, there has been a surge in studies focusing on regulated cell death (RCD). This emerging field encompasses various forms of cell death, such as necroptosis, pyroptosis, ferroptosis, and autophagy-dependent cell death (ADCD). Regulation of DC's RCD can serve as a possible therapeutic focus for the treatment of sepsis. Throughout time, numerous tactics have been devised and effectively implemented to improve abnormal immune response during sepsis progression, including modifying the functions of DCs and inhibiting DC cell death. In this review, we provide an overview of the functional impairment and RCD of DCs in septic states. Also, we highlight recent advances in targeting DCs to regulate host immune response following septic challenge.

Exploring factors that influence the behavioural intention of medical students to use 3D gastroscopic model to learn how to operate gastroscope using UTAUT Model.

BACKGROUND: The application of virtual reality (VR) in gastroscopic operation teaching can be safe and effective, but the advantages can be realized only when students accept and use it. This study aims to identify the factors influencing Chinese clinical medical postgraduates on their intention to use the 3D gastroscopic model constructed based on VR technology using Unified Theory of Acceptance and Use of Technology (UTAUT) model. Students' demographic factors are also taken into consideration. METHODS: All methods were carried out in accordance with relevant guidelines. Data were collected from clinical medical postgraduates students in China using stratified sampling. A total of 292 questionnaires including valid responses were used in this study. Data were processed using Amos 24.0 and SPSS 26.0 software and the statistical analysis technique was based on structural equation modeling (SEM). RESULTS: The results showed that different from the mediator of home location and year of clinical learning, mediator of gender, university kind and graduate degree did not affect the behavioral intention. In addition, performance expectancy, facilitating condition, and social influence directly and indirectly have effect on behavioral intention. Also, the significance between social influence and performance expectancy, social influence and effort expectancy were verified. CONCLUSIONS: This study manifested that the proposed framework based on the UTAUT had explanatory power to identify the factors influencing the students' behavioral intention to use the 3D gastroscopic model constructed based on VR technology. Whereas, an important variable of effort expectancy in the frame of the SEM were not certified, thereby indicating that particular attention should be paid to this variable by universities and teachers before applying 3D gastroscopic model constructed based on VR technology in teaching. Added preparatory work is required such as explaining the basic knowledge of the operating steps of VR model and make students adequately understand its accessibility, which can probably improve the intentions of them to use it. The positive effects of social influence on performance expectancy and effort expectancy we proposed was also verified in this study, which provided a direction for future research.

Ion-Assisted Preparation of Bimetallic Porous Nanodendrites for Active and Stable Water Electrolysis.

Delicate electrochemical active surface area (ECSA) engineering over the exposed catalytic interface and surface topology of platinum-based nanomaterial represents an effective pathway to boost its catalytic properties toward the clean energy conversion system. Here, for the first time, the facial and universal production of dendritic Pt-based nanoalloys (Pt-Ni, Co, Fe) with highly porous feature via a novel Zn2+ -mediated solution approach is demonstrated. In the presence of Zn2+ during synthesis, the competition of different galvanic replacement reactions and consequently generated "branch-to-branch" growth mode are believed to play key roles for the in situ fabrication of such unique nanostructure. Due to the fully exposed active sites and ligand effect-induced electronic optimization, electrochemical hydrogen evolution in alkaline media on these catalysts exhibit dramatic activity enhancement, delivering a current density of 30.6 mA cm-2 at a 70 mV overpotential for the Pt3 Ni nanodendrites and over 7.4 times higher than that of commercial Pt/C. This work highlights a general and powerful ion-assisted strategy for exploiting dendritic Pt-based nanostructures with efficient activities for water electrolysis.

Evidence-based core information for health communication of tobacco control: The effect of smoking on risks of female disease.

Objective: Cigarettes have become the the biggest killer of contemporary female's health and beauty. What kind of health information is suitable for the general public is an important issue to be discussed globally. The purpose of this study is to generate systematic, rigorous, public-demand-oriented and appropriate core information relevant to tobacco control based on the best available evidence, combined with audience preferences and pre-dissemination content review from multidisciplinary expertise in order to improve the effectiveness of health communication of tobacco control. Methods: Relevant systematic reviews meta-analysis that reported smoking on risks of female disease were identified by searching PubMed, Embase, the Cochrane Library, Web of Science, Clinical Trials.gov, and the International Clinical Trial Registry Platform. The Grading of Recommendations Assessment, Development and Evaluation (GRADE) process was applied to assess the evidence in order to make rigorous core information. The audience prevalence survey was conducted to ensure that core information was targeted and tailored. Finally, the expert assessment was used for a pre-dissemination content review and to evaluate whether the core information was appropriate or not. Results: The final core information consisted of eight parts concerning the effects of smoking and female cardiovascular disease, diabetes, rheumatoid arthritis, respiratory disease, digestive system disease, mental disease, non-pregnant female reproductive system disease, as well as pregnant women and their fetuses. A total of 35 items of core information suitable for dissemination was included and the quality of evidence, the degree of public demand and the outcome of pre-dissemination content review were reported. Conclusion: The core information related to female cardiovascular system diseases, as well as liver cancer and upper gastrointestinal cancer is the preferred content for health communication of tobacco control. The quality of evidence for core information related to pregnant women and their infants, as well as diseases of reproductive system, respiratory system, and diabetes needs to be improved to meet high public demand. The core information related to mental disease is more suitable for dissemination to patients with mental illness than to the general public. Besides, dissemination of core information should be individualized. Evidence-based Core Information for Health Communication of Tobacco Control would be helpful to provide evidence support for health communication related to tobacco control and enhance public health literacy for international communities that have high smoking prevalence and related disease burden.

Single-Site Heterogeneous Organometallic Ir Catalysts Embedded on Graphdiyne: Structural Manipulation Beyond the Carbon Support.

Accurate control over the coordination circumstances of single-atom catalysts (SACs) is decisive to their intrinsic activity. Here, two single-site heterogeneous organometallic catalysts (SHOCs), Cp*Ir-L/GDY (L = OH- and Cl- ; Cp* = pentamethylcyclopentadienyl), with the fine-tuned local coordination and electronic structure of Ir sites, are constructed by anchoring Cp*Ir complexes on graphdiyne (GDY) matrix via a one-pot procedure. The spectroscopic studies and theoretical calculations indicate that the Ir atoms in Cp*Ir-Cl/GDY and Cp*Ir-OH/GDY have a much higher oxidation state than Ir in the SAC Ir/GDY. As a proof-of-principle demonstration, the GDY-supported SHOCs are used for formic acid dehydrogenation, which display a fivefold enhancement of catalytic activity compared with SAC Ir/GDY. The kinetic isotope effect and in situ Fourier-transform infrared studies reveal that the rate-limiting step is the ß-hydride elimination process, and Cp* on the Ir site accelerates the ß-hydride elimination reaction. The GDY-supported SHOCs integrate the merits of both SACs and molecular catalysts, wherein the isolated Ir anchored on GDY echoes with SACs' behavior, and the Cp* ligand enables precise structural and electronic regulation like molecular catalysts. The scheme of SHOCs adds a degree of freedom in accurate regulation of the local structure, the electronic property, and therefore the catalytic performance of single-atom catalysts.

Passage of exogeneous fine particles from the lung into the brain in humans and animals.

There are still significant knowledge gaps in understanding the intrusion and retention of exogeneous particles into the central nervous system (CNS). Here, we uncovered various exogeneous fine particles in human cerebrospinal fluids (CSFs) and identified the ambient environmental or occupational exposure sources of these particles, including commonly found particles (e.g., Fe- and Ca-containing ones) and other compositions that have not been reported previously (such as malayaite and anatase TiO2), by mapping their chemical and structural fingerprints. Furthermore, using mouse and in vitro models, we unveiled a possible translocation pathway of various inhaled fine particles from the lung to the brain through blood circulation (via dedicated biodistribution and mechanistic studies). Importantly, with the aid of isotope labeling, we obtained the retention kinetics of inhaled fine particles in mice, indicating a much slower clearance rate of localized exogenous particles from the brain than from other main metabolic organs. Collectively, our results provide a piece of evidence on the intrusion of exogeneous particles into the CNS and support the association between the inhalation of exogenous particles and their transport into the brain tissues. This work thus provides additional insights for the continued investigation of the adverse effects of air pollution on the brain.

Theoretical Analysis of Terahertz Frequency Multiplier Based on Semiconductor Superlattices.

We propose a terahertz frequency multiplier based on high order harmonic generation in a GaAs-based miniband superlattice driven by an electric field. The performance of the frequency multiplier is analyzed using the balance equation approach, which incorporates momentum and energy relaxation processes at different lattice temperatures. It is found that the generated high-order harmonic power is sensitive to temperature changes. The peak power appears around resonance between driving terahertz frequency and intrinsic Bloch frequency. In the presence of the magnetic field, the peak power shifts towards a stronger static electric field region. The simulated results about the dependence of the second and third harmonic powers on a DC electric field are in qualitative consistence with the experiments. The proposed terahertz frequency multiplier based on semiconductor superlattice, being compact and efficient, is provided as a good candidate for terahertz wave generation.

Palladium Nanoplate-Based IL-6 Receptor Antagonists Ameliorate Cancer-Related Anemia and Simultaneously Inhibit Cancer Progression.

In recent years, targeted therapies and immunotherapeutics, along with conventional chemo- and radiotherapy, have greatly improved cancer treatments. Unfortunately, in cancer patients, anemia, either as a complication of cancer progression or as the result of cancer treatment, undermines the expected therapeutic efficacy. Here, we developed a smart nanosystem based on the palladium nanoplates (PdPLs) to deliver tocilizumab (TCZ, a widely used IL-6R antibody) to the liver for specific blockade of IL-6/IL-6R signaling to correct anemia. With chemical modifications, this nanosystem delivered a large mass of TCZ and enhanced liver delivery, inducing a marked suppression of hepcidin expression as a result of diminished IL-6 signaling. Through this mechanism, significant suppression of tumor progression was realized (at least in part) because of the corrected anemia after treatment.

Size-Dependent Activity and Selectivity of Atomic-Level Copper Nanoclusters during CO/CO2 Electroreduction.

As a favorite descriptor, the size effect of Cu-based catalysts has been regularly utilized for activity and selectivity regulation toward CO2 /CO electroreduction reactions (CO2 /CORR). However, little progress has been made in regulating the size of Cu nanoclusters at the atomic level. Herein, the size-gradient Cu catalysts from single atoms (SAs) to subnanometric clusters (SCs, 0.5-1 nm) to nanoclusters (NCs, 1-1.5 nm) on graphdiyne matrix are readily prepared via an acetylenic-bond-directed site-trapping approach. Electrocatalytic measurements show a significant size effect in both the activity and selectivity toward CO2 /CORR. Increasing the size of Cu nanoclusters will improve catalytic activity and selectivity toward C2+ productions in CORR. A high C2+ conversion rate of 312 mA cm-2 with the Faradaic efficiency of 91.2 % are achieved at -1.0 V versus reversible hydrogen electrode (RHE) over Cu NCs. The activity/selectivity-size relations provide a clear understanding of mechanisms in the CO2 /CORR at the atomic level.

Disordered serum erythroferrone and hepcidin levels as indicators of the spontaneous abortion occurrence during early pregnancy in humans.

Spontaneous abortion is a common, detrimental outcome of pregnancy, and can be induced by a variety of factors, including pathophysiological conditions and socioeconomic circumstances. Despite numerous studies examining the aetiology of spontaneous abortion, there is limited understanding of the disordered iron transportation between mother and fetus through the placenta. Recently, erythroferrone (ERFE) was recognized as a novel negative regulator of hepcidin that can elevate nutritional iron absorption and macrophagic iron egress for enhanced erythropoiesis. However, its diagnostic significance in different disease conditions associated with iron remains poorly understood. In the current study, we discovered disordered maternal iron homeostasis in women who had spontaneous abortions during early pregnancy, as characterized by increased serum iron and hepcidin levels, and conversely, reduced serum ERFE levels, compared to healthy control individuals and women with normal pregnancy. Comprehensive statistical analyses revealed the correlation between different variables and pregnancy status, signifying the pronounced diagnostic value of an increased ratio of serum hepcidin and ERFE (HE ratio) in recognizing adverse pregnancy status. In contrast to previous non-selective discrete surrogates, such as iron, hepcidin and ferritin, the HE ratio may otherwise stand for a novel and more representative hallmark for early spontaneous abortion.

Regulating kinetics and thermodynamics of electrochemical nitrogen reduction with metal single-atom catalysts in a pressurized electrolyser.

Using renewable electricity to synthesize ammonia from nitrogen paves a sustainable route to making value-added chemicals but yet requires further advances in electrocatalyst development and device integration. By engineering both electrocatalyst and electrolyzer to simultaneously regulate chemical kinetics and thermodynamic driving forces of the electrocatalytic nitrogen reduction reaction (ENRR), we report herein stereoconfinement-induced densely populated metal single atoms (Rh, Ru, Co) on graphdiyne (GDY) matrix (formulated as M SA/GDY) and realized a boosted ENRR activity in a pressurized reaction system. Remarkably, under the pressurized environment, the hydrogen evolution reaction of M SA/GDY was effectively suppressed and the desired ENRR activity was strongly amplificated. As a result, the pressurized ENRR activity of Rh SA/GDY at 55 atm exhibited a record-high NH3 formation rate of 74.15 µg h-1⋅cm-2, a Faraday efficiency of 20.36%, and a NH3 partial current of 0.35 mA cm-2 at -0.20 V versus reversible hydrogen electrode, which, respectively, displayed 7.3-, 4.9-, and 9.2-fold enhancements compared with those obtained under ambient conditions. Furthermore, a time-independent ammonia yield rate using purified 15N2 confirmed the concrete ammonia electroproduction. Theoretical calculations reveal that the driving force for the formation of end-on N2* on Rh SA/GDY increased by 9.62 kJ/mol under the pressurized conditions, facilitating the ENRR process. We envisage that the cooperative regulations of catalysts and electrochemical devices open up the possibilities for industrially viable electrochemical ammonia production.

A 2D transition metal carbide MXene-based SPR biosensor for ultrasensitive carcinoembryonic antigen detection.

Surface plasmon resonance (SPR) has become a leading technique for in situ bioaffinity assay of diverse targets without need of fluorescent or enzymatic labeling. Nanomaterials-enhanced SPR sensors have developed rapidly and widened the application scope of SPR sensing technology. In this report we describe an ultrasensitive SPR biosensor for detecting carcinoembryonic antigen (CEA). Our SPR biosensor utilizes a Ti3C2-MXene-based sensing platform and multi-walled carbon nanotube (MWCNTs)-polydopamine (PDA)-Ag nanoparticle (AgNPs) signal enhancer. Ti3C2-MXene, a new class of two-dimensional (2D) transition metal carbides, offers a large hydrophilic-biocompatible surface ideal for SPR biosensing. Ti3C2-MXene/AuNPs composites after synthesis are then decorated with staphylococcal protein A (SPA) to orient and immobilize monoclonal anti-CEA antibody (Ab1) through its Fc region. By introducing MWCNTs-PDA-AgNPs-polyclonal anti-CEA antibody (MWPAg-Ab2) conjugate combined with a sandwich format, the present method provides a dynamic range for CEA determination of 2×10-16 to 2×10-8 M and a detection limit of 0.07 fM. This biosensing approach demonstrates good reproducibility and high specificity for CEA in real serum samples providing a promising method to evaluate CEA in human serum for early diagnosis and monitoring of cancer.

Lattice -Mismatch-Induced Ultrastable 1T-Phase MoS2-Pd/Au for Plasmon-Enhanced Hydrogen Evolution.

Metallic 1T-phase transition metal dichalcogenides (TMDs) are of considerable interest in enhancing catalytic applications due to their abundant active sites and good conductivity. However, the unstable nature of 1T-phase TMDs greatly impedes their practical applications. Herein, we developed a new approach for the synthesis of highly stable 1T-phase Au/Pd-MoS2 nanosheets (NSs) through a metal assembly induced ultrastable phase transition for achieving a very high electrocatalytic activity in the hydrogen evolution reaction. The phase transition was evoked by a novel mechanism of lattice-mismatch-induced strain based on density functional theory (DFT) calculations. Raman spectroscopy and transmission electron microscopy (TEM) were used to confirm the phase transition on experimental grounds. A novel heterostructured 1T MoS2-Au/Pd catalyst was designed and synthesized using this mechanism, and the catalyst exhibited a 0 mV onset potential in the hydrogen evolution reaction under light illumination. Therefore, this method can potentially be used to fabricate 1T-phase TMDs with remarkably enhanced activities for different applications.

Interface engineered surface morphology evolution of Au@Pd core-shell nanorods.

Engineering the interfacial structure of bimetallic nanocrystals is an effective method to improve their electrocatalytic performances. Here, we design a facile strategy for controlling the surface morphology evolution of Au@Pd core-shell nanorods by adjusting the solution supersaturation. The Pd shell of the as-prepared Au@Pd bimetallic nanorods can be modulated from a (111) facet-exposed island to a (100) facet-exposed conformal shell. The conformal shell structure exhibited enhanced catalytic performance toward the ethanol oxidation reaction, while the core-island structure possessed better catalytic stability. This work provides a facile method for interfacial engineering of bimetallic nanocrystals with desired morphology and properties.

Ultrathin NiCo2O4 nanowalls supported on a 3D nanoporous gold coated needle for non-enzymatic amperometric sensing of glucose.

A disposable needle-type of hybrid electrode was prepared from a core of stainless steel needle whose surface was modified with a 3D nanoporous gold/NiCo2O4 nanowall hybrid structure for electrochemical non-enzymatic glucose detection. This hybrid electrode, best operated at 0.45 V (vs. SCE) in solutions of pH 13 has a linear response in the 0.01 to 21 mM glucose concentration range, a response time of <1 s, and a 1 µM detection limit (at an S/N ratio of 3). The remarkable enhancement compared to the solid gold/NiCo2O4 and stainless steel/NiCo2O4 hybrid electrodes in electrochemical performance is assumed to originate from the good electrical conductivity and large surface area of the hybrid electrode, which enhance the transport of mass and charge during electrochemical reactions. This biosensor was also applied to real sample analysis with little interferences. The electrode is disposable and considered to be a promising tool for non-enzymatic sensing of glucose in a variety of practical situations. Graphical abstract Ultrathin NiCo2O4 nanowalls supported on nanoporous gold that is coated on a stainless steel needle was fabricated for sensitive non-enzymatic amperometric sensing of glucose.

Nanoporous Sulfur-Doped Copper Oxide (Cu2OxS1-x) for Overall Water Splitting.

Developing active and bifunctional noble metal-free electrocatalysts is crucial for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in the full water splitting process. A ternary nanoporous sulfur-doped copper oxide (Cu2OxS1-x) was successfully synthesized on Cu foam. The obtained Cu2OxS1-x/Cu shows robust electrocatalytic activity toward HER with a low overpotential of 40 mV at 10 mA cm-2 and a Tafel slope of 68 mV dec-1 and exhibits long-term stability in acid solution. Moreover, Cu2OxS1-x shows excellent electrocatalytic activity for OER, HER, and overall water splitting as a bifunctional catalyst in 1.0 M KOH electrolyte. The sulfur doping strategy implemented here can greatly improve the catalytic performance and stability in both acidic and alkaline water electrolyzers and presents an efficient catalyst for overall water splitting.

One-Step Synthesis of a Self-Supported Copper Phosphide Nanobush for Overall Water Splitting.

Developing cheap, stable, and efficient electrocatalysts is of extreme importance in the effort to replace noble metal electrocatalysts for use in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). We report a three-dimensional self-supported Cu3P nanobush (NB) catalyst directly grown on a copper mesh via a one-step method. This nanostructure exhibits a superior catalytic activity of achieving a current density of 10 mA cm-2 at 120 mV and exhibits a long-term stability in acid solutions. It shows a Tafel slope of 72 mV dec-1 and an onset potential of -44 mV. This catalyst displays a good catalytic activity in basic electrolytes, reaching a current density of 10 mA cm-2 at the overpotential values of 252 and 380 mV for HER and OER, respectively. The bifunctional Cu3P NB/Cu catalyst exhibits better catalytic performances than the Pt/C and IrO2 catalysts in a two-electrode electrolyzer for overall water splitting.

Degradation of amine-based water treatment polymers during chloramination as N-nitrosodimethylamine (NDMA) precursors.

Recent studies indicated that water treatment polymers such as poly(epichlorohydrin dimethylamine) (polyamine) and poly(diallyldimethylammonium chloride) (polyDADMAC) may form N-nitrosodimethylamine (NDMA) when in contact with chloramine water disinfectants. To minimize such potential risk and improve the polymer products, the mechanisms of how the polymers behave as NDMA precursors need to be elucidated. Direct chloramination of polymers and intermediate monomers in reagent water was conducted to probe the predominant mechanisms. The impact of polymer properties including polymer purity, polymer molecular weight and structure, residual dimethylamine (DMA), and other intermediate compounds involved in polymer synthesis, and reaction conditions such as pH, oxidant dose, and contact time on the NDMA formation potential (NDMA-FP) was investigated. Polymer degradation after reaction with chloramines was monitored at the molecular level using FT-IR and Raman spectroscopy. Overall, polyamines have greater NDMA-FP than polyDADMAC, and the NDMA formation from both polymers is strongly related to polymer degradation and DMA release during chloramination. Polyamines' tertiary amine chain ends play a major role in their NDMA-FP, while polyDADMACs' NDMA-FP is related to degradation of the quaternary ammonium ring group.

Recent advances on noncovalent molecular imprints for affinity separations.

Molecularly imprinted polymers (MIPs) are tailor-made synthetic materials capable of selectively rebinding a target analyte, or a group of structurally related compounds based on a combination of recognition mechanisms including size, shape, and functionality. Among the advantageous properties of MIPs are the achievable specific affinity, the relative ease of preparation, and their mechanical and chemical robustness, which renders them ideal materials for applications as stationary phase (e. g., affinity chromatography or SPE), or as antibody mimics (e. g., biomimetic assays). Here, we review recent advancements on the application of MIPs in affinity separations and biomimetic assays, which have focused on the synthesis of size- and shape-uniform particles facilitating reproducibility, improved binding site accessibility, and enhanced affinity. While MIPs certainly offer promising potential as selective separation phase in a variety of applications, deeper understanding of the fundamental interactions governing imprinting, and rational understanding of the imprinting mechanism has yet to be achieved for providing rational guidelines in deliberately designing next-generation MIP materials.