RESUMO
Lithiated Cu current collectors with a lean Li supply have been extensively explored as prospective composite anodes for constructing lithium metal batteries (LMBs) but suffer from low Coulombic efficiencies (CE) and uncontrollable dendrite growth. Herein, two hexaazanonaphthalene (HATN)-based compounds comprising rich conjugated aromatic rings and redox-active CâN groups are synthesized and exploited to modify the Cu surface for mediating smooth Li plating/stripping. Compared to the HATN compound interlinked through flexible sigma bonds, the one conjugated through dual sp2-carbon manifests a more rigid backbone, improved electric conductivity, and enhanced mesoporosity. As a result, Cu electrodes modified with the latter demonstrate enhanced CE and suppressed dendrites in both half and symmetric cells, apart from a stable operation over 250 cycles in the LiFePO4 full cells with a capacity retention of 94.9% at 1 C. This study signifies the tailoring of intramolecular conjugation and chain configuration of lithiophilic macromolecules to facilitate reversible Li deposition on Cu for achieving high-performance LMBs.
RESUMO
Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.
RESUMO
Converting CO2 to value-added chemicals through a photoelectrochemical (PEC) system is a creative approach toward renewable energy utilization and storage. However, the rational design of appropriate catalysts while being effectively integrated with semiconductor photoelectrodes remains a considerable challenge for achieving single-carbon products with high efficiency. Herein, we demonstrate a novel sulfidation-induced strategy for in situ grown sulfide-derived Ag nanowires on a Si photocathode (denoted as SD-Ag/Si) based on the standard crystalline Si solar cells. Such an exquisite design of the SD-Ag/Si photocathode not only provides a large electrochemically active surface area but also endows abundant active sites of Ag2S/Ag interfaces and high-index Ag facets for PEC CO production. The optimized SD-Ag/Si photocathode displays an ideal CO Faradic efficiency of 95.2% and an onset potential of +0.26 V versus the reversible hydrogen electrode, ascribed to the sulfidation-induced synergistic effect of the surface atomic arrangement and electronic structure in Ag catalysts that promote charge transfer, facilitate CO2 adsorption and activation, and suppress hydrogen evolution reaction. This sulfidation-induced strategy represents a scalable approach for designing high-performance catalysts for electrochemical and PEC devices with efficient CO2 utilization.
RESUMO
Artificial photocatalytic CO2 reduction (CO2R) holds great promise to directly store solar energy into chemical bonds. The slow charge and mass transfer kinetics at the triphasic solid-liquid-gas interface calls for the rational design of heterogeneous photocatalysts concertedly boosting interfacial charge transfer, local CO2 concentration, and exposure of active sites. To meet these requirements, in this study heterostructures of CdS/MOL (MOL = metal-organic layer) furnishing different redox Co sites are fabricated for CO2R photocatalysts. It is found that the coordination environment of Co is key to photocatalytic activity. The best catalyst ensemble comprising ligand-chelated Co2+ with the bipyridine electron mediator demonstrates a high CO yield rate of 1523 µmol h-1 gcat -1, selectivity of 95.8% and TON of 1462.4, which are ranked among the best seen in literature. Comprehensive photochemical and electroanalytical characterizations attribute the high CO2R performance to the improved photocarrier separation and charge kinetics originated from the proper energy band alignment and coordination chemistry. This work highlights the construction of 2D heterostructures and modulation of transition metal coordination to expedite the charge kinetics in photocatalytic CO2 reduction.
RESUMO
Li-CO2 batteries that integrate energy storage with greenhouse gas fixation have received a great deal of attention in the pursuit of carbon neutrality. However, cyclic accumulation of the insulative and insoluble Li2CO3 on the cathode surface severely restrains the battery cyclability, especially under a high depth of discharge/charge. Herein, we design and fabricate a microreactor-type catalyst by embedding Ru nanoparticles into the shells of mesoporous hollow carbon spheres. We show that both the hollow cavity and mesoporous shell are indispensable for concertedly furnishing a high activity to catalyze reversible Li2CO3 formation/decomposition. This unique structure ensures that the Ru sites masked by exterior Li2CO3 deposits during charging can resume the redox process of discharge by working with the prestored electrolyte to establish an inner reaction path. The thus fabricated Li-CO2 batteries demonstrate remarkable cyclability of 1085 cycles under 0.5 Ah g-1 and 326 cycles under 2 Ah g-1 at 1 A g-1, outshining most of the literature reports. This study highlights a smart catalyst design to boost the reversibility and cyclability of Li-CO2 batteries through an "in & out" strategy.
RESUMO
Silicon semiconductor functionalized with molecular catalysts emerges as a promising cathode for photoelectrochemical (PEC) CO2 reduction reaction (CO2 RR). However, the limited kinetics and stabilities remains a major hurdle for the development of such composites. We herein report an assembling strategy of silicon photocathodes via chemically grafting a conductive graphene layer onto the surface of n+ -p Si followed by catalyst immobilization. The covalently-linked graphene layer effectively enhances the photogenerated carriers transfer between the cathode and the reduction catalyst, and improves the operating stability of the electrode. Strikingly, we demonstrate that altering the stacking configuration of the immobilized cobalt tetraphenylporphyrin (CoTPP) catalyst through calcination can further enhance the electron transfer rate and the PEC performance. At the end, the graphene-coated Si cathode immobilized with CoTPP catalyst managed to sustain a stable 1-Sun photocurrent of -1.65â mA cm-2 over 16â h for CO production in water at a near neutral potential of -0.1â V vs. reversible hydrogen electrode. This represents a remarkable improvement of PEC CO2 RR performance in contrast to the reported photocathodes functionalized with molecular catalysts.
RESUMO
Photoelectrochemical CO2 reduction utilizing silicon-based photocathodes offers a promising route to directly store solar energy in chemical bonds, provoking the development of heterogeneous molecular catalysts with high turnover rates. Herein, an in situ surface transformation strategy is adopted to grow metal-organic frameworks (MOFs) on Si-based photocathodes, serving as catalytic scaffolds for boosting both the kinetics and selectivity of CO2 reduction. Benefitting from the multi-junctional configuration for enhanced charge separation and the porous MOF scaffold enriching redox-active metalloporphyrin sites, the Si photocathode demonstrates a high CO faradaic efficiency of 87% at a photocurrent density of 10.2 mA cm-2, which is among the best seen for heterogeneous molecular catalysts. This study highlights the exploitation of reticular chemistry and macrocycle complexes as Earth-abundant alternatives for catalyzing artificial photosynthesis.
RESUMO
Photoelectrochemical (PEC) conversion of CO2 in an aqueous medium into high-energy fuels is a creative strategy for storing solar energy and closing the anthropogenic carbon cycle. However, the rational design of catalytic architectures to selectively and efficiently produce a target product such as CO has remained a grand challenge. Herein, an efficient and selective Si photocathode for CO production is reported by utilizing a TiO2 interlayer to bridge the Au nanoparticles and n+ p-Si. The TiO2 interlayer can not only effectively protect and passivate Si surface, but can also exhibit outstanding synergies with Au nanoparticles to greatly promote CO2 reduction kinetics for CO production through stabilizing the key reaction intermediates. Specifically, the TiO2 layer and Au nanoparticles work concertedly to enhance the separation of localized surface plasmon resonance generated hot carriers, contributing to the improved activity and selectivity for CO production by utilizing the hot electrons generated in Au nanoparticles during PEC CO2 reduction. The optimized Au/TiO2 /n+ p-Si photocathode exhibits a Faradaic efficiency of 86% and a partial current density of -5.52 mA cm-2 at -0.8 VRHE for CO production, which represent state-of-the-art performance in this field. Such a plasmon-enhanced strategy may pave the way for the development of high-performance PEC photocathodes for energy-efficient CO2 utilization.