Low-Defect-Density Monolayer MoS2 Wafer by Oxygen-Assisted Growth-Repair Strategy.

Atomic chalcogen vacancy is the most commonly observed defect category in two dimensional (2D) transition-metal dichalcogenides, which can be detrimental to the intrinsic properties and device performance. Here a low-defect density, high-uniform, wafer-scale single crystal epitaxial technology by in situ oxygen-incorporated "growth-repair" strategy is reported. For the first time, the oxygen-repairing efficiency on MoS2 monolayers at atomic scale is quantitatively evaluated. The sulfur defect density is greatly reduced from (2.71 ± 0.65) × 1013 down to (4.28 ± 0.27) × 1012 cm-2, which is one order of magnitude lower than reported as-grown MoS2. Such prominent defect deduction is owing to the kinetically more favorable configuration of oxygen substitution and an increase in sulfur vacancy formation energy around oxygen-incorporated sites by the first-principle calculations. Furthermore, the sulfur vacancies induced donor defect states is largely eliminated confirmed by quenched defect-related emission. The devices exhibit improved carrier mobility by more than three times up to 65.2 cm2 V-1 s-1 and lower Schottky barrier height reduced by half (less than 20 meV), originating from the suppressed Fermi-level pinning effect from disorder-induced gap state. The work provides an effective route toward engineering the intrinsic defect density and electronic states through modulating synthesis kinetics of 2D materials.

ß-Ga2O3 Nanoribbon with Ultra-High Solar-Blind Ultraviolet Polarization Ratio.

Solar-blind ultraviolet (UV) detection plays a critical role in imaging and communication due to its low-noise background, high signal-to-noise ratio, and strong anti-interference capabilities. Detecting the polarization state of UV light can enhance image information and expand the communication dimension. Although polarization detection is explored in visible and infrared light, and applied in fields such as astrophysics and submarine seismic wave detection, solar-blind UV polarization detection remains largely unreported. This is primarily due to the challenge of creating UV polarizers with high transmittance, high extinction ratio, and strong resistance to UV radiation. In this study, it is discovered that the space symmetry breaking of the ß-Ga2O3's b-c plane results in a significant optical absorption dichroic ratio. Leveraging ß-Ga2O3's high solar-blind UV response, a lensless solar-blind UV polarization-sensitive photodetector, circumventing the challenges associated with solar-blind UV polarizers is designed. This photodetector exhibits an exceptionally high intrinsic polarization ratio under 254 nm linearly polarized light, approximately two orders of magnitude higher than other reported nanomaterial-based polarization-sensitive photodetectors. Additionally, it demonstrates significant advantages in solar-blind UV imaging and light communication. This work introduces a novel strategy for solar-blind ultraviolet polarization detection and offers a promising approach for solar-blind light communication.

Composition Modulation-Mediated Band Alignment Engineering from Type I to Type III in 2D vdW Heterostructures.

Band alignment engineering is crucial for facilitating charge separation and transfer in optoelectronic devices, which ultimately dictates the behavior of Van der Waals heterostructures (vdWH)-based photodetectors and light emitting diode (LEDs). However, the impact of the band offset in vdWHs on important figures of merit in optoelectronic devices has not yet been systematically analyzed. Herein, the regulation of band alignment in WSe2/Bi2Te3- xSex vdWHs (0 ≤ x ≤ 3) is demonstrated through the implementation of chemical vapor deposition (CVD). A combination of experimental and theoretical results proved that the synthesized vdWHs can be gradually tuned from Type I (WSe2/Bi2Te3) to Type III (WSe2/Bi2Se3). As the band alignment changes from Type I to Type III, a remarkable responsivity of 58.12 A W-1 and detectivity of 2.91×1012 Jones (in Type I) decrease in the vdWHs-based photodetector, and the ultrafast photoresponse time is 3.2 µs (in Type III). Additionally, Type III vdWH-based LEDs exhibit the highest luminance and electroluminescence (EL) external quantum efficiencies (EQE) among p-n diodes based on Transition Metal Dichalcogenides (TMDs) at room temperature, which is attributed to band alignment-induced distinct interfacial charge injection. This work serves as a valuable reference for the application and expansion of fundamental band alignment principles in the design and fabrication of future optoelectronic devices.

WS2 ribbon arrays with defined chirality and coherent polarity.

One-dimensional transition metal dichalcogenides exhibiting an enhanced bulk photovoltaic effect have the potential to exceed the Shockley-Queisser limit efficiency in solar energy harvest within p-n junction architectures. However, the collective output of these prototype devices remains a challenge. We report on the synthesis of single-crystalline WS2 ribbon arrays with defined chirality and coherent polarity through an atomic manufacturing strategy. The chirality of WS2 ribbon was defined by substrate couplings into tunable armchair, zigzag, and chiral species, and the polarity direction was determined by the ribbon-precursor interfacial energy along a coherent direction. A single armchair ribbon showed strong bulk photovoltaic effect and the further integration of ~1000 aligned ribbons with coherent polarity enabled upscaling of the photocurrent.

Spatiotemporal-Dependent Confinement Effect of Bubble Swarms Enables a Fractal Hierarchical Assembly with Promoted Chirality.

The submarine-confined bubble swarm is considered an important constraining environment for the early evolution of living matter due to the abundant gas/water interfaces it provides. Similarly, the spatiotemporal characteristics of the confinement effect in this particular scenario may also impact the origin, transfer, and amplification of chirality in organisms. Here, we explore the confinement effect on the chiral hierarchical assembly of the amphiphiles in the confined bubble array stabilized by the micropillar templates. Compared with the other confinement conditions, the assembly in the bubble scenario yields a fractal morphology and exhibits a unique level of the chiral degree, ordering, and orientation consistency, which can be attributed to the characteristic interfacial effects of the rapidly formed gas/water interfaces. Thus, molecules with a balanced amphiphilicity can be more favorable for the promotion. Not limited to the pure enantiomers, chiral amplification of the enantiomer-mixed assembly is observed only in the bubble scenario. Beyond the interfacial mechanism, the fast formation kinetics of the confined liquid bridges in the bubble scenario endows the assembly with the tunable hierarchical morphology when regulating the amphiphilicity, aggregates, and confined spaces. Furthermore, the chiral-induced spin selectivity (CISS) effect of the fractal hierarchical assembly was systematically investigated, and a strategy based on photoisomerization was developed to efficiently modulate the CISS effect. This work provides insights into the robustness of confined bubble swarms in promoting a chiral hierarchical assembly and the potential applications of the resulting chiral hierarchical patterns in solid-state spintronic and optical devices.

2D Janus Polarization Functioned by Mechanical Force.

2D polarization materials have emerged as promising candidates for meeting the demands of device miniaturization, attributed to their unique electronic configurations and transport characteristics. Although the existing inherent and sliding mechanisms are increasingly investigated in recent years, strategies for inducing 2D polarization with innovative mechanisms remain rare. This study introduces a novel 2D Janus state by modulating the puckered structure. Combining scanning probe microscopy, transmission electron microscopy, and density functional theory calculations, this work realizes force-triggered out-of-plane and in-plane dipoles with distorted smaller warping in GeSe. The Janus state is preserved after removing the external mechanical perturbation, which could be switched by modulating the sliding direction. This work offers a versatile method to break the space inversion symmetry in a 2D system to trigger polarization in the atomic scale, which may open an innovative insight into configuring novel 2D polarization materials.

Spectrum-Dependent Image Convolutional Processing via a Two-Dimensional Polarization-Sensitive Photodetector.

Currently, the improvement in the processing capacity of traditional processors considerably lags behind the demands of real-time image processing caused by the advancement of photodetectors and the widespread deployment of high-definition image sensors. Therefore, achieving real-time image processing at the sensor level has become a prominent research domain in the field of photodetector technology. This goal underscores the need for photodetectors with enhanced multifunctional integration capabilities than can perform real-time computations using optical or electrical signals. In this study, we employ an innovative p-type semiconductor GaTe0.5Se0.5 to construct a polarization-sensitive wide-spectral photodetector. Leveraging the wide-spectral photoresponse, we realize three-band imaging within a wavelength range of 390-810 nm. Furthermore, real-time image convolutional processing is enabled by configuring appropriate convolution kernels based on the polarization-sensitive photocurrents. The innovative design of the polarization-sensitive wide-spectral GaTe0.5Se0.5-based photodetector represents a notable contribution to the domain of real-time image perception and processing.

Spectrometer-Less Remote Sensing Image Classification Based on Gate-Tunable van der Waals Heterostructures.

Remote sensing technology, which conventionally employs spectrometers to capture hyperspectral images, allowing for the classification and unmixing based on the reflectance spectrum, has been extensively applied in diverse fields, including environmental monitoring, land resource management, and agriculture. However, miniaturization of remote sensing systems remains a challenge due to the complicated and dispersive optical components of spectrometers. Here, m-phase GaTe0.5Se0.5 with wide-spectral photoresponses (250-1064 nm) and stack it with WSe2 are utilizes to construct a two-dimensional van der Waals heterojunction (2D-vdWH), enabling the design of a gate-tunable wide-spectral photodetector. By utilizing the multi-photoresponses under varying gate voltages, high accuracy recognition can be achieved aided by deep learning algorithms without the original hyperspectral reflectance data. The proof-of-concept device, featuring dozens of tunable gate voltages, achieves an average classification accuracy of 87.00% on 6 prevalent hyperspectral datasets, which is competitive with the accuracy of 250-1000 nm hyperspectral data (88.72%) and far superior to the accuracy of non-tunable photoresponse (71.17%). Artificially designed gate-tunable wide-spectral 2D-vdWHs GaTe0.5Se0.5/WSe2-based photodetector present a promising pathway for the development of miniaturized and cost-effective remote sensing classification technology.

Machine-learning-assisted and real-time-feedback-controlled growth of InAs/GaAs quantum dots.

The applications of self-assembled InAs/GaAs quantum dots (QDs) for lasers and single photon sources strongly rely on their density and quality. Establishing the process parameters in molecular beam epitaxy (MBE) for a specific density of QDs is a multidimensional optimization challenge, usually addressed through time-consuming and iterative trial-and-error. Here, we report a real-time feedback control method to realize the growth of QDs with arbitrary density, which is fully automated and intelligent. We develop a machine learning (ML) model named 3D ResNet 50 trained using reflection high-energy electron diffraction (RHEED) videos as input instead of static images and providing real-time feedback on surface morphologies for process control. As a result, we demonstrate that ML from previous growth could predict the post-growth density of QDs, by successfully tuning the QD densities in near-real time from 1.5 × 1010 cm-2 down to 3.8 × 108 cm-2 or up to 1.4 × 1011 cm-2. Compared to traditional methods, our approach can dramatically expedite the optimization process and improve the reproducibility of MBE. The concepts and methodologies proved feasible in this work are promising to be applied to a variety of material growth processes, which will revolutionize semiconductor manufacturing for optoelectronic and microelectronic industries.

Patterned growth of AgBiS2 nanostructures on arbitrary substrates for broadband and eco-friendly optoelectronic sensing.

The patterning of functional nanomaterials shows a promising path in the advanced fabrication of electronic and optoelectronic devices. Current micropatterning strategies are indispensable for post-etching/liftoff processes that contaminate/damage functional materials. Herein, we developed an innovative, low-temperature, post-liftoff-free, seed-confined fabricating strategy that can tackle this issue, thus achieving designated patterns of flower-shaped AgBiS2 nanostructures at either micro- or macro-scale on arbitrary substrates that are either rigid or flexible. Made of patterned AgBiS2 nanostructures, the photoconductor shows broadband (320 nm-2200 nm), sensitive (Rpeak = 1.56 A W-1), and fast (less than 100 µs) photoresponses. Furthermore, single-pixel raster-scanning and 28 × 12 focal plane array imaging were performed to demonstrate reliable and resolved electrical responses to optical patterns, showcasing the potential of the photoconductor in practical imaging applications. Notably, the patterning process enables strain-releasing micro-structures, which lead to the fabrication of a flexible photodetector with high durability upon over 1000 bending/recovering testing cycles. This study provides a simple, low-temperature, and eco-friendly strategy to address the current challenges in non-aggressive micro-fabrication and arbitrary patterning of semiconductors, which are promising to meet the development of further emerging technologies in scalable and wearable optoelectronic sensors.

Interlayer bond polarizability model for interlayer phonons in van der Waals heterostructures.

Raman scattering provides essential insights into phonons, electronic structures and electron-phonon coupling within solids through the intensity of Raman peaks, which cannot be easily quantified using the classical bond polarizability model. The interlayer bond polarizability model (IBPM) had been developed to understand the Raman intensity of layer-breathing modes (LBMs) in two-dimensional materials. However, the quantitative understanding of the LBM intensity of a van der Waals heterostructure (vdWH) remains challenging. Here, in polynary vdWHs comprising twisted multilayer graphene (tMLG), MoS2 and hBN, we observed a series of LBMs, whose intensity is markedly dependent on the excitation energy and twist angle of the tMLG constituent. An improved IBPM is proposed to quantitatively understand the Raman intensity of LBMs in the tMLG-based vdWHs, including the emergence or absence of a specific LBM when the excitation energy is resonant with the electronic states of tMLG or MoS2 constituents. This work underscores the significant potential of the improved IBPM in accurately understanding and predicting the intensity profile of LBM in polynary vdWHs, even for the case of Raman scattering with excitation energies selectively resonant with the electronic states of the corresponding specific constituents.

Polarization- and Gate-Tunable Optoelectronic Reverse in 2D Semimetal/Semiconductor Photovoltaic Heterostructure.

Polarimetric photodetector can acquire higher resolution and more surface information of imaging targets in complex environments due to the identification of light polarization. To date, the existing technologies yet sustain the poor polarization sensitivity (<10), far from market application requirement. Here, the photovoltaic detectors with polarization- and gate-tunable optoelectronic reverse phenomenon are developed based on semimetal 1T'-MoTe2 and ambipolar WSe2 . The device exhibits gate-tunable reverse in rectifying and photovoltaic characters due to the directional inversion of energy band, yielding a wide range of current rectification ratio from 10-2 to 103 and a clear object imaging with 100 × 100 pixels. Acting as a polarimetric photodetector, the polarization ratio (PR) value can reach a steady state value of ≈30, which is compelling among the state-of-the-art 2D-based polarized detectors. The sign reversal of polarization-sensitive photocurrent by varying the light polarization angles is also observed, that can enable the PR value with a potential to cover possible numbers (1→+∞/-∞→-1). This work develops a photovoltaic detector with polarization- and gate-tunable optoelectronic reverse phenomenon, making a significant progress in polarimetric imaging and multifunction integration applications.

Polarization Reversal of Group IV-VI Semiconductors with Pucker-Like Structure: Mechanism Dissecting and Function Demonstration.

Polarization imaging presents advantages in capturing spatial, spectral, and polarization information across various spectral bands. It can improve the perceptual ability of image sensors and has garnered more applications. Despite its potential, challenges persist in identifying band information and implementing image enhancement using polarization imaging. These challenges often necessitate integrating spectrometers or other components, resulting in increased complexities within image processing systems and hindering device miniaturization trends. Here, the characteristics of anisotropic absorption reversal are systematically elucidated in pucker-like group IV-VI semiconductors MX (M = Ge, Sn; X = S, Se) through theoretical predictions and experimental validations. Additionally, the fundamental mechanisms behind anisotropy reversal in different bands are also explored. The photodetector is constructed by utilizing MX as a light-absorbing layer, harnessing polarization-sensitive photoresponse for virtual imaging. The results indicate that the utilization of polarization reversal photodetectors holds advantages in achieving further multifunctional integration within the device structure while simplifying its configuration, including band information identification and image enhancement. This study provides a comprehensive analysis of polarization reversal mechanisms and presents a promising and reliable approach for achieving dual-band image band identification and image enhancement without additional auxiliary components.

2D Ruddlesden-Popper Sn-Based Perovskite Weak Light Detector for Image Transmission and Reflection Imaging.

2D Ruddlesden-Popper Sn-based perovskite has excellent optoelectronic properties and weak halide ion migration characteristics, making it an ideal candidate for weak light detection, which has great potential in light communication, and medical applications. Although Sn-based perovskite photodetectors are developed, weak light detection is not demonstrated yet. Herein, a high-performance self-powered photodetector with the capability to detect ultra-weak light signals is designed based on vertical PEA2 SnI4 /Si nanowires heterojunction. Due to the low dark current and high light absorption efficiency, the devices present a remarkable responsivity of 42.4 mA W-1 , a high detectivity of 8 × 1011 Jones, and an ultralow noise current of 2.47 × 10-13 A Hz-1/2 . Especially, the device exhibits a high on-off current ratio of 18.6 at light signals as low as 4.60 nW cm-2 , revealing the capacity to detect ultra-weak light. The device is applied as a signal receiver and realized image transmission in light communication system. Moreover, high-resolution reflection imaging and multispectral imaging are obtained using the device as the sensor in the imaging system. These results reveal that 2D PEA2 SnI4 -based self-powered photodetectors with low-noise current possess enormous potential in future weak light detection.

Giant enhancement of second-harmonic generation of indium selenide on planar Au.

Two-dimensional (2D) van der Waals layered γ-type indium selenide (γ-InSe) holds great promise for the development of ultrathin and low-energy-consumption nonlinear optical devices due to its broken inversion symmetry regardless of layer number. Nevertheless, the 2D InSe thin flakes still exhibit short light-matter interaction lengths, thus resulting in low efficiencies of nonlinear optical processes. In this work, we provide a facile 2D semiconductor-metal structure consisting of InSe thin flakes (thickness: 11-54 nm) on planar Au film, which exhibits great second-harmonic generation (SHG) enhancement by a factor of up to 1182. The SHG enhancement is attributed to the interference effect-induced strong electric field in highly absorbing InSe; meanwhile, the increase in reflectivity by Au film also plays an important role. Furthermore, the InSe thickness and excitation wavelength dependences of enhancement factors are revealed. This work provides a convenient approach to developing high-efficiency 2D nonlinear optical devices with ultrathin form.

High-Sensitivity and Fast-Speed UV Photodetectors Based on Asymmetric Nanoporous-GaN/Graphene Vertical Junction.

GaN-based photodetectors are strongly desirable in many advanced fields, such as space communication, environmental monitoring, etc. However, the slow photo-response speed in currently reported high-sensitivity GaN-based photodetectors still hinders their applications. Here, we demonstrate a high-sensitivity and fast-speed UV photodetector based on asymmetric Au/nanoporous-GaN/graphene vertical junctions. The nanoporous GaN-based vertical photodetector shows an excellent rectification ratio up to ∼105 at +4 V/-4 V. The photo-responsivity and specific detectivity of the device is up to 1.01 × 104 A/W and 7.84 × 1014 Jones, respectively, more than three orders of magnitude higher than the control planar photodetector. With switching light on and off, the repeatable on/off current ratio of the nanoporous GaN-based vertical photodetector is ∼4.32 × 103, which is about 1.51 × 103 times to that of the control planar device. The measured rise/decay time is 12.2 µs/14.6 µs, which is the fastest value for the high-sensitivity GaN-based photodetectors to date. These results suggest that the asymmetric Au/nanoporous-GaN/graphene structure can improve the sensitivity and the photo-response speed of GaN-based PDs simultaneously.

Strong Exciton-Exciton Scattering of Exfoliated van der Waals InSe toward Efficient Continuous-Wave Near-Infrared P-Band Emission.

P-band emission is a superlinear low-coherence emission through exciton-exciton (X-X) scattering into photon-like states. It occurs without the prerequisites of population inversion or macroscopical coherence, rendering lower power consumption than the widely explored superlinear low-coherence emissions including superfluorescence, amplified spontaneous emission, and random lasing, and holds great potential for speckle-free imaging and interferometric sensing. However, competition processes including exciton dissociation and annihilation undermine its operation at room temperature and/or low excitation conditions. Here we report room-temperature P-band emission from InSe microflakes with excitation density of 1010 cm-2, offering 2-orders-of-magnitude lower operation density compared to the state-of-the-art superlinear low-coherence emissions. The efficient P-band emission is attributed to a large X-X scattering strength of 0.25 µeV µm2 due to enhanced spatial confinement along with intrinsic material metrics of 3D/2D exciton complex and asymmetric electron/hole mass. These findings open an avenue toward strong low-coherence near-infrared light sources based on van der Waals semiconductors.

Probing Anisotropic Deformation and Near-Infrared Emission Tuning in Thin-Layered InSe Crystal under High Pressure.

Indium selenide (InSe) exhibits high lattice compressibility and an extraordinary capability of tailoring the optical band gap under pressure beyond other 2D materials. Herein, by applying hydrostatic pressure via a diamond anvil cell, we revealed an anisotropic deformation dynamic and efficient manipulation of near-infrared light emission in thin-layered InSe strongly correlated to layer numbers (N = 5-30). As N > 20, the InSe lattice is compressed in all directions, and the intralayer compression leads to widening of the band gap, resulting in an emission blue shift (∼120 meV at 1.5 GPa). In contrast, as N ≤ 15, an efficient emission red shift is observed from band gap shrinkage (rate of 100 meV GPa-1), which is attributed to the predominant uniaxial interlayer compression because of the high strain resistance along the InSe-diamond interface. These findings advance the understanding of pressure-induced lattice deformation and optical transition evolution in InSe and could be applied to other 2D materials.

Meta-Atom Coupling Induced Chiral Hotspot in Silicon Nitride Staggered Nanorods Meta-Surface.

Dielectric meta-surfaces have emerged as an effective way for fabricating chiral optical devices, and the chiral meta-surfaces are usually constituted by periodic chiral meta-atom structures. Here, we report a chiral meta-surface consisting of nonchiral silicon nitride rectangular nanorods. The chiral hotspots are generated between the staggered nanorods due to the coupling between the two nearest neighbor nanorod units. 14.6% macroscopic circular dichroism (CD) is achieved experimentally with larger area staggered nanorods. Meanwhile, we demonstrate that the wavelength tuning capability of this design from 696 to 820 nm by simply modulating the overlap length of nanorods. Our work highlights the mechanisms for CD hotspot generation without complex chiral units, which paves a novel way for future on-chip photon-spin selective devices.