Numerical research on disastrous mechanism of seepage instability of karst collapse column considering variable mass effect.

In order to reveal the disastrous mechanism of seepage instability of karst collapse column considering variable mass effect, a variable mass fluid-solid coupling mechanical model of water inrush is established, by considering the random distribution characteristics of a collapse column. Taking Qianjin coal mine as the research background, based on the Weibull distribution theory, the heterogeneous distribution characteristics of rock mass is described, and COMSOL Multiphysics numerical simulation software is employed to simulate the seepage characteristics and inrush water changes in collapse columns under different conditions of homogeneity, water pressure, and initial porosity. The research results show that the greater the homogeneity is, the more water conduction channels are formed, and the porosity increases accordingly, when considering the influence of different homogeneity on the seepage characteristics of broken rock mass, which eventually leads to water inrush accidents and a sharp increase in water inflow. Besides, when studying the seepage evolution law of different water pressures on a broken rock mass, an elevation of water pressure dramatically increases the porosity and seepage rate of the water. Over time, the broken rock particles gradually migrate and the fine particles are transported and eroded by the water flow, resulting in changes in the seepage characteristics and the formation of potential water diversion channels. Finally, when taking into account the effect of different initial porosity on the fractured rock mass seepage characteristics, the greater the original porosity is, the higher the seepage velocity is, and the particle migration increases the permeability. This leads to a more pronounced conductive water passage formation, which reveals the disastrous mechanism of seepage instability of karst collapse column considering variable mass effect.

Nonlinear evolution characteristics and seepage mechanical model of fluids in broken rock mass based on the bifurcation theory.

With the deep extension of coal mining in China, fault water inrush has become one of the major disasters threatening the safety production of coal mine. Based on the control equations of steady state and non-Darcy seepage in fractured rock mass, the multi-parameter nonlinear dynamic seepage equations of fractured rock mass are established in this paper. Based on the nonlinear dynamics theory, the function of the state variable in the system is derived, and the influence of the gradual change of non-Darcy flow factors on the structural stability of seepage system is studied. The research achievements show that there are three branches in the equilibrium state of the seepage system. Specifically, the stability of the equilibrium state changes abruptly near the limit parameter. The seepage dynamic system of fractured rock mass has the delayed bifurcation, and the coal mine disaster such as fault water inrush occurs easily at the bifurcation point. The research results are of great significance to enrich the theory of fault water inrush in coal mine, and to reveal the disastrous mechanism of fault water inrush and guide its prevention and control technology in coal mine, which can provide the theoretical reference for predicting the water seepage stability in fractured rock mass.

Research on overburden structural characteristics and support adaptability in cooperative mining of sectional coal pillar and bottom coal seam.

In the mining process of the II1 coal seam at Zhaogu No. 2 coal mine, a method of stratified mining is employed, leaving relatively wide coal pillars in sections. To enhance the resource recovery rate, the mine carries out the cooperative mining of the sectional coal pillars and the lower layer coal seam. The 14,022 cooperative working face of fully-mechanized and fully-mechanized top-coal caving at Zhaogu No. 2 coal mine is taken as the research object. Through numerical simulation, theoretical calculations, and on-site industrial trials, a comprehensive analysis of the overburden structural characteristics and the support adaptability at the working face is conducted. It is clarified that a stress arch bearing structure can be formed above the sectional coal pillars during cooperative mining, and this structure is controlled by key strata. The formation of a stress arch bearing structure in the overburden above the sectional coal pillars provides protection for the underlying mining area. A formula for calculating the working resistance of hydraulic supports under the stress arch in sectional coal pillar is derived. Based on these results, the working resistance of hydraulic supports in the coal pillar area is calculated and selected. Field application shows that the working resistance of the support is 10,000 kN in the fully-mechanized top-coal caving working face, and is 9000 kN in fully-mechanized working face, meeting the support requirements and ensuring safe mining at the working face. This study provides a valuable engineering reference for achieving cooperative mining of abandoned sectional coal pillars and lower layer coal seam in stratified mining method.

Fracture propagation and pore pressure evolution characteristics induced by hydraulic and pneumatic fracturing of coal.

A two-dimensional unsteady seepage model for coal using a finite element program is developed, and the temporal variations of key factors such as water pressure and hydraulic gradient are analyzed in this paper. Additionally, the triaxial rock mechanical experiment and utilized pneumatic fracturing equipment on raw coal samples to investigate both hydraulic and pneumatic fracturing processes are conducted. Through these experiments, the relationship between pressure and crack formation and expansion are examined. The analysis reveals that the pore pressure gradient at the coal inlet reaches its peak during rapid surges in water pressure but diminishes over time. Conversely, the pore pressure gradient at the outlet side exhibits a gradual increase. Hydraulic fracturing is most likely to occur at the water inlet during sudden increases in water pressure. Besides, as the permeability of coal decreases, the duration for seepage stabilization prolongs due to the intensified pore pressure gradient resulting from sudden increases in water pressure. Moreover, an extended period of high hydraulic gradient further increases the risk of hydraulic fracturing. The experimental findings indicate that coal samples initially experience tensile failure influenced by water and air pressure. Subsequently, mode I cracks form under pressure, propagating along the fracture surface and becoming visible. The main types of failure observed in hydraulic and pneumatic fracturing are diametrical tensile failure, and the development of fractures can be categorized into three distinct stages, which contains the initial stage characterized by slight volume changes while water pressure increases, the expansion stage when pressure reaches the failure strength, and the crack closure stage marked by little or even decreasing volume changes during pressure unloading. The acoustic emission signal accurately corresponds to these three stages.

Experimental research on mechanical performance of grouting plugging material with large amount of fly ash.

In order to achieve the purpose of long-term stable mining of roadway, the strength and stability of rock mass are improved by means of grouting of fractured rock mass. In this paper, orthogonal test and numerical simulation methods were used to study the plugging performance of large amount of fly ash grouting slurry. The fluidity, water separation rate, compressive strength, setting time, stone rate and viscosity of the slurry were analyzed, and the optimal slurry ratio scheme was obtained. Under the optimal ratio scheme, the slurry transport process of the fractured rock mass was simulated, and the dynamic evolution law of the permeability of the slurry in the fractured rock mass was obtained. The study shows that the proportions of fly ash, ordinary Portland cement, loess, accelerant, expansion agent, bentonite water reducer and solidifying agent were 52.65%, 27.70%, 13.85%, 3%, 0.7%, 0.8%, 0.6% and 0.7% in the slurry ratio scheme, respectively. The slurry migration in the fractured rock mass experienced three stages, namely the filling and diffusion stage, the percolation and deposition stage and the sealing stage. The initial permeability was 971.9 mD and decreased to 45.79 mD after 1800 s, with a decrease of 95.3%. The slurry sealing performance was significantly improved, which has certain guiding significance for the application of underground grouting reinforcement engineering.

Seepage evolution characteristics and water inrush mechanism in collapse column under mining influence.

To obtain the seepage evolution rule and water inrush mechanism of the collapse column, a multi-field coupled mechanical model for water inrush disasters caused by the collapse column is established in this paper, on the basis of the specific engineering conditions of the 1908 working face in the Qianjin coal mine. The mechanical model is composed of internal column elements within the collapse column and surrounding rock masses. The research focuses on the seepage evolution rule in the roof collapse column under different mining conditions and investigates the permeation instability mechanism of collapse column based on the transition of flow state. The research results indicate that the seepage pathway evolves continuously, ultimately forming a channel for water inrush, as the working face advances towards the collapse column. Besides, the water inflow increases rapidly when the working face advances 100 m, then gradually stabilizes, indicating that the seepage channel entry of the collapse column is in a stable stage. Meanwhile, mass loss in the collapse column gradually moves upward. the collapse column remains stable as a whole in the initial stage of water flow, with a small permeability, exhibiting linear flow. As time steps increases, particle loss in collapse column gradually extends to the upper part, forming a stable seepage channel. The flow velocity shows fluctuations with a slow declining trend over time.