RESUMO
Covalent adaptable crosslinks, such as the alkyl-hydrazone, endow hydrogels with unique viscoelastic properties applicable to cell delivery and bioink systems. However, the alkyl-hydrazone crosslink lacks stability in biologically relevant environments. Furthermore, when formed with biopolymers such as hyaluronic acid (HA), low molecular weight polymers (<60 kDa), or low polymer content (<2 wt%) hydrogels are typically employed as entanglements reduce injectability. Here, a high molecular weight (>60 kDa) HA alkyl-hydrazone crosslinked hydrogel is modified with benzaldehyde-poly(ethylene glycol)3-azide to incorporate azide functional groups. By reacting azide-modified HA with a multi-arm poly(ethylene glycol) (PEG) functionalized with bicyclononyne, stabilizing triazole bonds are formed through strain-promoted azide-alkyne cycloaddition (SPAAC). Increasing the fraction of triazole bonds within the hydrogel network from 0% to 12% SPAAC substantially increases stability. The slow gelation kinetics of the SPAAC reaction in the 12% SPAAC hydrogel enables transient self-healing properties and a similar extrusion force as the 0% SPAAC hydrogel. Methyl-PEG4-hydrazide is then introduced to further slowdown network evolution, which temporarily lowers the extrusion force, improves printability, and increases post-extrusion mesenchymal stem cell viability and function in the 12% SPAAC hydrogel. This work demonstrates improved stability and temporal injectability of high molecular weight HA-PEG hydrogels for extrusion-based printing and cell delivery.
Assuntos
Ácido Hialurônico , Hidrazonas , Hidrogéis , Células-Tronco Mesenquimais , Polietilenoglicóis , Triazóis , Hidrogéis/química , Hidrazonas/química , Polietilenoglicóis/química , Ácido Hialurônico/química , Triazóis/química , Células-Tronco Mesenquimais/citologia , Humanos , Animais , Reação de Cicloadição , Sobrevivência Celular/efeitos dos fármacos , Reagentes de Ligações Cruzadas/químicaRESUMO
The ability of cells to organize into tissues with proper structure and function requires the effective coordination of proliferation, migration, polarization, and differentiation across length scales. Skeletal muscle is innately anisotropic; however, few biomaterials can emulate mechanical anisotropy to determine its influence on tissue patterning without introducing confounding topography. Here, we demonstrate that substrate stiffness anisotropy coordinates contractility-driven collective cellular dynamics resulting in C2C12 myotube alignment over millimeter-scale distances. When cultured on mechanically anisotropic liquid crystalline polymer networks (LCNs) lacking topography, C2C12 myoblasts collectively polarize in the stiffest direction. Cellular coordination is amplified through reciprocal cell-ECM dynamics that emerge during fusion, driving global myotube-ECM ordering. Conversely, myotube alignment was restricted to small local domains with no directional preference on mechanically isotropic LCNs of the same chemical formulation. These findings provide valuable insights for designing biomaterials that mimic anisotropic microenvironments and underscore the importance of stiffness anisotropy in orchestrating tissue morphogenesis.
Assuntos
Matriz Extracelular , Fibras Musculares Esqueléticas , Anisotropia , Animais , Fibras Musculares Esqueléticas/fisiologia , Camundongos , Linhagem Celular , Diferenciação Celular , Contração Muscular/fisiologia , Mioblastos/citologiaRESUMO
Thermochromic materials have found widespread commercial use in packaging as temperature indicators. Often, these products utilize leuco dyes that are mixed into conventional polymeric resins to prepare coatings or films that exhibit temperature-dependent color change. Here, we consider a distinctive approach to thermochromism via the selective reflection of liquid crystalline elastomers that retain the helicoidal structure of the cholesteric phase (CLCEs). Upon heating, the order of the CLCEs reduces and approaches zero, resulting in a change in birefringence as well as material thickness, both of which manifest as changes in the selective reflection to heating. This examination systematically prepares CLCEs capable of reversible thermochromic response as a function of cross-link density and liquid crystalline composition. A particular focus of this examination is the preparation of CLCEs composed of chiral and achiral liquid crystalline monomers that reduce the strength of the mesogen-mesogen interaction and accordingly reduce the nematic-isotropic transition temperature. The low birefringence of some of the CLCE compositions facilitates thermochromic reflection tuning, followed by switching.
RESUMO
Liquid crystalline elastomers (LCEs) are soft materials that associate order and deformation. Upon deformation, mechanically induced changes order affect entropy and can produce a caloric output (elastocaloric). Elastocaloric effects in materials continue to be considered for functional use as solid state refrigerants. Prior elastocaloric investigations of LCEs and related materials have measured ≈2 °C temperature changes upon deformation (100% strain). Here, the elastocaloric response of LCEs is explored that are prepared with a subambient nematic to isotropic transition temperature. These materials are referred as "isotropic" liquid crystalline elastomers. The LCEs are prepared by a two-step thiol-Michael/thiol-ene reaction. This polymer network chemistry enhances elastic recovery and reduces hysteresis compared to acrylate-based chemistries. The LCEs exhibit appreciable elastocaloric temperature changes upon deformation and recovery (> ± 3 °C, total ΔT of 6 °C) to deformation driven by minimal force (<< 1 MPa). Notably, the strong association of deformation and order and the resulting temperature change attained at low force achieves a responsivity of 14 °C MPa-1 which is seven times greater than natural rubber.
RESUMO
The performance of robotic systems can benefit from low-density material actuators that emulate muscle typology (e.g., fast and slow twitch) of natural systems. Recent reports detail the thermomechanical, chemical, electrical, and pneumatic response of twisted and coiled fibers. The geometrical constraints imparted on typically commodity materials realize distinguished stimuli-induced actuation including low density, high force, and moderate stroke. Here, actuators are prepared by twisting fibers composed of liquid crystal elastomers (LCEs). The actuators combine the inherent stimuli-response of LCEs with the geometrical constraints of twisted fiber actuators to dramatically increase the deformation rate, specific work, and achievable force output. In some geometries, the thermomechanical response of the LCE exhibits a pseudo-first-order transition.
RESUMO
Liquid crystalline elastomers (LCEs) are stimuli-responsive materials that transduce an input energy into a mechanical response. LCE composites prepared with photothermal agents, such as nanoinclusions, are a means to realize wireless, remote, and local control of deformation with light. Amongst photothermal agents, gold nanorods (AuNRs) are highly efficient converters when the irradiation wavelength matches the longitudinal surface plasmon resonance (LSPR) of the AuNRs. However, AuNR aggregation broadens the LSPR which also reduces photothermal efficiency. Here, the surface chemistry of AuNRs is engineered via a well-controlled two-step ligand exchange with a monofunctional poly(ethylene glycol) (PEG) thiol that greatly improves the dispersion of AuNRs in LCEs. Accordingly, LCE-AuNR nanocomposites with very low PEG-AuNR content (0.01 wt%) prepared by 3D printing are shown to be highly efficient photothermal actuators with rapid response (>60% strain s-1) upon irradiation with near-infrared (NIR; 808 nm) light. Because of the excellent dispersion of PEG-AuNR within the LCE, unabsorbed NIR light transmits through the nanocomposites and can actuate a series of samples. Further, the dispersion also allows for the optical deformation of millimeter-thick 3D printed structures without sacrificing actuation speed. The realization of well-dispersed nanoinclusions to maximize the stimulus-response of LCEs can benefit functional implementation in soft robotics or medical devices.
RESUMO
Polymer stabilized cholesteric liquid crystals (PSCLCs) are electrically reconfigurable reflective elements. Prior studies have hypothesized and indirectly confirmed that the electro-optic response of these composites is associated with the electrically mediated distortion of the stabilizing polymer network. The proposed mechanism is based on the retention of structural chirality in the polymer stabilizing network, which upon deformation is spatially distorted, which accordingly affects the pitch of the surrounding low molar-mass liquid crystal host. Here, we utilize fluorescent confocal polarized microscopy to directly assess the electro-optic response of PSCLCs. By utilizing dual fluorescent probes, sequential imaging experiments confirm that the periodicity of the polymer stabilizing network matches that of the low molar-mass liquid crystal host. Further, we isolate distinct ion-polymer interactions that manifest in certain photopolymerization conditions.
RESUMO
Pressure-sensitive adhesives (PSAs) are widely employed in consumer goods, health care, and commercial industry. Anisotropic adhesion of PSAs is often desirable to enable high force capacity coupled with facile release and has typically been realized through the introduction of complex surface and/or bulk microstructures while also maintaining high surface conformability. Although effective, microstructure fabrication can add cost and complexity to adhesive fabrication. Here, we explore aligned liquid crystalline elastomers (LCEs) as directional adhesives. Aligned LCEs exhibit direction-dependent stiffness, dissipation, and nonlinear deformation under load. By varying the cross-link content, we study how the bulk mechanical properties of LCEs correlate to their peel strength and peel anisotropy. We demonstrate up to a 9-fold difference in peel force measured when the LCE is peeled parallel vs perpendicular to the alignment axis. Opportunities to spatially localize adhesion are presented in a monolithic LCE patterned with different director orientations.
RESUMO
Oligomers prepared by chain extension of liquid crystalline monomers are thermotropic. The alignment of liquid crystalline oligomers to shear flow via direct ink write printing is an increasingly popular approach to prepare aligned and 3-D printed liquid crystalline elastomers (LCEs). Here, we are concerned with the contribution of order and thermal history on the rheological properties of liquid crystalline. When the oligomers begin in a polydomain nematic state, the transition to an aligned nematic state occurs gradually over a wide range of shear rates. Conversely, when the oligomers begin in an isotropic state they behave as a Newtonian fluid until a critical shear rate is reached, at which point they align in a critical manner. It is shown that by either decreasing liquid crystalline content or increasing temperature, the viscosity of the oligomer melt decreases while this critical shear rate increases. In addition, the normal stress of oligomers is positive over all shear rates but decreases significantly in magnitude with increasing temperature. By combining the analysis of both temperature and liquid crystalline content, it is demonstrated that the temperature relative to the nematic-isotropic transition temperature is key to the oligomers' unique flow behaviors.
RESUMO
Granular biomaterials have found widespread applications in tissue engineering, in part because of their inherent porosity, tunable properties, injectability, and 3D printability. However, the assembly of granular hydrogels typically relies on spherical microparticles and more complex particle geometries have been limited in scope, often requiring templating of individual microgels by microfluidics or in-mold polymerization. Here, we use dithiolane-functionalized synthetic macromolecules to fabricate photopolymerized microgels via batch emulsion, and then harness the dynamic disulfide crosslinks to rearrange the network. Through unconfined compression between parallel plates in the presence of photoinitiated radicals, we transform the isotropic microgels are transformed into disks. Characterizing this process, we find that the areas of the microgel surface in contact with the compressive plates are flattened while the curvature of the uncompressed microgel boundaries increases. When cultured with C2C12 myoblasts, cells localize to regions of higher curvature on the disk-shaped microgel surfaces. This altered localization affects cell-driven construction of large supraparticle scaffold assemblies, with spherical particles assembling without specific junction structure while disk microgels assemble preferentially on their curved surfaces. These results represent a unique spatiotemporal process for rapid reprocessing of microgels into anisotropic shapes, providing new opportunities to study shape-driven mechanobiological cues during and after granular hydrogel assembly.
RESUMO
Liquid crystal elastomer films that morph into cones are strikingly capable lifters. Thus motivated, we combine theory, numerics, and experiments to reexamine the load-bearing capacity of conical shells. We show that a cone squashed between frictionless surfaces buckles at a smaller load, even in scaling, than the classical Seide-Koiter result. Such buckling begins in a region of greatly amplified azimuthal compression generated in an outer boundary layer with oscillatory bend. Experimentally and numerically, buckling then grows subcritically over the full cone. We derive a new thin-limit formula for the critical load, ât^{5/2}, and validate it numerically. We also investigate deep postbuckling, finding further instabilities producing intricate states with multiple Pogorelov-type curved ridges arranged in concentric circles or Archimedean spirals. Finally, we investigate the forces exerted by such states, which limit lifting performance in active cones.
RESUMO
Electrocatalytic synthesis under mild conditions has become increasingly important as one of the practical alternatives for industrial applications, especially for the green ammonia (NH3) industry. A properly engineered electrocatalyst plays a vital role in the realization of superior catalytic performance. Among various types of promising nanomaterials, metal-organic frameworks (MOFs) are competitive candidates for developing efficient electrocatalytic NH3 synthesis from simple nitrogen-containing molecules or ions, such as N2 and NO3-. In this review, recent advances in the development of electrocatalysts derived from MOFs for the electrosynthesis of NH3 are collected, categorized, and discussed, including their application in the N2 reduction reaction (NRR) and the NO3- reduction reaction (NO3RR). Firstly, the fundamental principles are illustrated, such as plausible mechanisms of NH3 generation from N2 and NO3-, the apparatus of corresponding electrocatalysis, parameters for evaluation of reaction efficiency, and detection methods of yielding NH3. Then, the electrocatalysts for NRR processes are discussed in detail, including pristine MOFs, MOF-hybrids, MOF-derived N-doped porous carbons, single atomic catalysts from pyrolysis of MOFs, and other MOF-related materials. Subsequently, MOF-related NO3RR processes are also listed and discussed. Finally, the existing challenges and prospects for the rational design and fabrication of electrocatalysts from MOFs for electrochemical NH3 synthesis are presented, such as the evolution of investigation methods with artificial intelligence, innovation in synthetic methods of MOF-related catalysts, advancement of characterization techniques, and extended electrocatalytic reactions.
RESUMO
In skeletal muscle tissue, injury-related changes in stiffness activate muscle stem cells through mechanosensitive signaling pathways. Functional muscle tissue regeneration also requires the effective coordination of myoblast proliferation, migration, polarization, differentiation, and fusion across multiple length scales. Here, we demonstrate that substrate stiffness anisotropy coordinates contractility-driven collective cellular dynamics resulting in C2C12 myotube alignment over millimeter-scale distances. When cultured on mechanically anisotropic liquid crystalline polymer networks (LCNs) lacking topographic features that could confer contact guidance, C2C12 myoblasts collectively polarize in the stiffest direction of the substrate. Cellular coordination is amplified through reciprocal cell-ECM dynamics that emerge during fusion, driving global myotube-ECM ordering. Conversely, myotube alignment was restricted to small local domains with no directional preference on mechanically isotropic LCNs of same chemical formulation. These findings reveal a role for stiffness anisotropy in coordinating emergent collective cellular dynamics, with implications for understanding skeletal muscle tissue development and regeneration.
RESUMO
Polymer stabilization of cholesteric liquid crystals can enable dynamic reconfiguration of the selective reflection of the CLC phase. Here, we explore how the contribution of the elasticity of the polymer stabilizing network affects the ion-mediated, electromechanical deformation and associated electro-optic response in PSCLCs. We utilize a free-radical chain transfer reaction between acrylate and thiol monomers that has been used to prepare elastomeric networks. This work maps the compositional contributions of total concentration and crosslink density to tuning and recovery.
RESUMO
Liquid crystalline elastomers (LCEs) are shape-changing materials that exhibit large deformations in response to applied stimuli. Local control of the orientation of LCEs spatially directs the deformation of these materials to realize a spontaneous shape change in response to stimuli. Prior approaches to shape programming in LCEs utilize patterning techniques that involve the detailed inscription of spatially varying nematic fields to produce sheets. These patterned sheets deform into elaborate geometries with complex Gaussian curvatures. Here, we present an alternative approach to realize shape-morphing in LCEs where spatial patterning of the crosslink density locally regulates the material deformation magnitude on either side of a prescribed interface curve. We also present a simple mathematical model describing the behavior of these materials. Further experiments coupled with the mathematical model demonstrate the control of the sign of Gaussian curvature, which is used in combination with heat transfer effects to design LCEs that self-clean as a result of temperature-dependent actuation properties.
RESUMO
Snap-through mechanisms are pervasive in everyday life in biological systems, engineered devices, and consumer products. Snap-through transitions can be realized in responsive materials via stimuli-induced mechanical instability. Here, we demonstrate a rapid and powerful snap-through response in liquid crystalline elastomers (LCEs). While LCEs have been extensively examined as material actuators, their deformation rate is limited by the second-order character of their phase transition. In this work, we locally pattern the director orientation of LCEs and fabricate mechanical elements with through-thickness (functionally graded) modulus gradients to realize stimuli-induced responses as fast as 6 ms. The rapid acceleration and associated force output of the LCE elements cause the elements to leap to heights over 200 times the material thickness. The experimental examination in functionally graded LCE elements is complemented with computational evaluation of the underlying mechanics. The experimentally validated model is then exercised as a design tool to guide functional implementation, visualized as directional leaping.
RESUMO
The large, directional stimuli-response of aligned liquid crystalline elastomers (LCEs) could enable functional utility in robotics, medicine, consumer goods, and photonics. The alignment of LCEs has historically been realized via mechanical alignment of a two-stage reaction. Recent reports widely utilize chain extension reactions of liquid crystal monomers (LCM) to form LCEs that are subject to either surface-enforced or mechanical alignment. Here, we prepare LCEs that contain intra-mesogenic supramolecular bonds synthesized via direct free-radical chain transfer photopolymerization processible by a distinctive mechanical alignment mechanism. The LCEs were prepared by the polymerization of a benzoic acid monomer (11OBA), which dimerized to form a liquid crystal monomer, with a diacrylate LCM (C6M). The incorporation of the intra-mesogenic hydrogen bonds increases the achievable nematic order from mechanical programming. Accordingly, LCEs prepared with larger 11OBA concentration exhibit higher magnitude thermomechanical strain values when compared to a LCE containing only covalent bonds. These LCEs can be reprogrammed with heat to return the aligned film to the polydomain state. The LCE can then be subsequently programmed to orient in a different direction. The facile preparation of (re)programmable LCEs with supramolecular bonds opens new avenues for the implementation of these materials as shape deployable elements.
RESUMO
The anisotropy of liquid crystalline elastomers (LCEs) is derived from the interaction-facilitated orientation of the molecular constituents. Here, we correlate the thermomechanical response of a series of LCEs subjected to mechanical alignment to measurements of the Hermans orientation parameter. The LCEs were systematically prepared with varying concentrations of liquid crystalline mesogens, which affects the relative degree of achievable order. These compositions were subject to varying degrees of mechanical alignment to prepare LCEs with orientations that span a wide range of orientation parameters. The stimuli-response of the LCEs indicates that the liquid crystalline content defines the temperature of actuation, whereas the orientation parameter of the LCE is intricately correlated to both the total actuation strain of the LCE as well as the rate of thermomechanical response.
RESUMO
Liquid crystalline elastomers (LCEs) are stimuli-responsive materials capable of undergoing large deformations. The thermomechanical response of LCEs is attributable to the coupling of polymer network properties and disruption of order between liquid crystalline mesogens. Complex deformations have been realized in LCEs by either programming the nematic director via surface-enforced alignment or localized mechanical deformation in materials incorporating dynamic covalent chemistries. Here, the preparation of LCEs via thiol-Michael addition reaction is reported that are amenable to surface-enforced alignment. Afforded by the thiol-Michael addition reaction, dynamic covalent bonds are uniquely incorporated in chemistries subject to surface-enforce alignment. Accordingly, LCEs prepared with complex director profiles are able to be programmed and reprogrammed by (re)activating the dynamic covalent chemistry to realize distinctive shape transformations.
RESUMO
Granular synthetic hydrogels are useful bioinks for their compatibility with a variety of chemistries, affording printable, stimuli-responsive scaffolds with programmable structure and function. Additive manufacturing of microscale hydrogels, or microgels, allows for the fabrication of large cellularized constructs with percolating interstitial space, providing a platform for tissue engineering at length scales that are inaccessible by bulk encapsulation where transport of media and other biological factors are limited by scaffold density. Herein, synthetic microgels with varying degrees of degradability are prepared with diameters on the order of hundreds of microns by submerged electrospray and UV photopolymerization. Porous microgel scaffolds are assembled by particle jamming and extrusion printing, and semi-orthogonal chemical cues are utilized to tune the void fraction in printed scaffolds in a logic-gated manner. Scaffolds with different void fractions are easily cellularized post printing and microgels can be directly annealed into cell-laden structures. Finally, high-throughput direct encapsulation of cells within printable microgels is demonstrated, enabling large-scale 3D culture in a macroporous biomaterial. This approach provides unprecedented spatiotemporal control over the properties of printed microporous annealed particle scaffolds for 2.5D and 3D tissue culture.