Iron-Catalyzed Cross-Dehydrogenative Coupling of para-Quinone Methides with Formamides: In Situ Activation of C(sp2)-H Bonds.

A novel and straightforward method for the iron-catalyzed regioselective cross-dehydrogenative coupling of para-quinone methides (p-QMs) with formamides has been developed, facilitated by the in situ activation of the C(sp2)-H bonds of the formyl and alkenyl substituents via a radical strategy. This method does not require the preactivation of the substrates, and it can accommodate a wide range of p-QMs and formamides under the optimized reaction conditions, resulting in the formation of the expected C-7 acetamides-functionalized para-quinone methides with moderate to good yields. The control experiments revealed that the reaction follows the fundamental equation of second-order kinetics. Additionally, an exploration of the Hammett effect was undertaken to elucidate the impact of the substituents for the reaction. In combination with the DFT calculation, a plausible reaction mechanism was proposed through meticulously controlled experiments.

A Highly Conjugated Nickel(II)-Acetylide Framework for Efficient Photocatalytic Carbon Dioxide Reduction.

The incorporation of transition-metal single atoms as molecular functional entities into the skeleton of graphdiyne (GDY) to construct novel two-dimensional (2D) metal-acetylide frameworks, known as metalated graphynes (MGYs), is a promising strategy for developing efficient catalysts, which can combine the tunable charge transfer of GDY frameworks, the catalytic activity of metal and the precise distribution of single metallic centers. Herein, four highly conjugated MGY photocatalysts based on NiII, PdII, PtII, and HgII were synthesized for the first time using the 'bottom-up' strategy through the use of M-C bonds (-C≡C-M-C≡C-). Remarkably, the NiII-based graphyne (TEPY-Ni-GY) exhibited the highest CO generation rate of 18.3 mmol g-1 h-1 and a selectivity of 98.8%. This superior performance is attributed to the synergistic effects of pyrenyl and -C≡C-Ni(PBu3)2-C≡C- moieties. The pyrenyl block functions as an intramolecular π-conjugation channel, facilitating kinetically favorable electron transfer, while the -C≡C-Ni(PBu3)2-C≡C- moiety serves as the catalytic site that enhances CO2 adsorption and activation, thereby suppressing competitive hydrogen evolution. This study provides a new perspective on MGY-based photocatalysts for developing highly active and low-cost catalysts for CO2 reduction.

Fabrication of Ultrafine L10-FePt-Based Magnetic Patterns Enabled by Single-Step Nanoimprint-Assisted Block Copolymer Self-Assembly.

The bit islands in magnetic patterns play a crucial role in advancing magnetic recording density, but the trade-off issues between miniaturization and scalable production are still challenging. Here we present a two-in-one technique of nanoimprint lithography (NIL)-assisted self-assembly using a specially engineered FePt-containing block copolymer (BCP), offering a simple one-step fabrication for L10-FePt bit-patterned media with high throughput. This method combines top-down NIL with bottom-up self-assembly to precisely control the ultrafine magnetic bits in the nanoscale patterns. The FePt-derived BCPs, designed with an equal atomic ratio of Fe and Pt, ensure the preparation of homogeneously dispersed L10-FePt nanoparticles (NPs). Subsequent BCP pyrolysis results in NPs with enhanced magnetic properties, significantly advancing high-density data storage devices. This strategy offers a novel approach to drive the innovative creation of ordered magnetic metal alloy NPs arrays for practical applications.

Platinum(II) bis(arylacetylide) complexes bearing diarylamino-substituted bipyridine ligands for solution-processable phosphorescent OLED applications.

A comprehensive investigation has been carried out on a series of complexes of the type (N^N)Pt(-CC-Ar)2, where N^N represents diarylamino-substituted 2,2'-bipyridine (bpy) ligands and -CC-Ar refers to the substituted arylacetylide ligands. The introduction of trifluoromethyl and methoxy substituents to the phenylacetylide unit results in color tuning of the phosphorescence energy in these complexes. The bulky diarylamino substituents on the bipyridine ligand showed distinctive electronic properties, resulting in improved hole-transporting characteristics. Solution-processed phosphorescent organic light-emitting devices (PHOLEDs) were fabricated using these PtII emissive dopants with poly(9-vinylcarbazole) (PVK) as the host. All the devices exhibit promising performances with the best luminance efficiency being up to 20 cd A-1 and the external quantum efficiency reaching 7%.

Over 18.2% efficiency of layer-by-layer all-polymer solar cells enabled by homoleptic iridium(III) carbene complex as solid additive.

The vertical phase distribution of active layers plays a vital role in balancing exciton dissociation and charge transport for achieving efficient polymer solar cells (PSCs). The layer-by-layer (LbL) PSCs are commonly prepared by using sequential spin-coating method from donor and acceptor solutions with distinct solvents and solvent additives. The enhanced exciton dissociation is expected in the LbL PSCs with efficient charge transport in the relatively neat donor or acceptor layers. In this work, a series of LbL all-polymer solar cells (APSCs) were fabricated with PM6 as donor and PY-DT as acceptor, and triplet material m-Ir(CPmPB)3 is deliberately incorporated into PY-DT layer to prolong exciton lifetimes of active layers. The power conversion efficiency (PCE) of LbL APSCs is improved to 18.24% from 17.32% by incorporating 0.3 wt% m-Ir(CPmPB)3 in PY-DT layer, benefiting from the simultaneously enhanced short-circuit current density (JSC) of 25.17 mA cm-2 and fill factor (FF) of 74.70%. The enhancement of PCE is attributed to the efficient energy transfer of m-Ir(CPmPB)3 to PM6 and PY-DT, resulting in the prolonged exciton lifetime in the active layer and the increased exciton diffusion distance. The efficient energy transfer from m-Ir(CPmPB)3 to PM6 and PY-DT layer can be confirmed by the increased photoluminescence (PL) intensity and the prolonged PL lifetime of PM6 and PY-DT in PM6 + m-Ir(CPmPB)3 and PY-DT + m-Ir(CPmPB)3 films. This study indicates that the triplet material as solid additive has great potential in fabricating efficient LbL APSCs by prolonging exciton lifetimes in active layers.

Water-Soluble Small Organic Fluorophores for Oncological Theragnostic Applications: Progress and Development.

Cancer is one of the major noncommunicable diseases, responsible for millions of deaths every year worldwide. Though various cancer detection and treatment modalities are available today, many deaths occur owing to its late-stage detection and metastatic nature. Noninvasive detection using luminescence-based imaging tools is considered one of the promising techniques owing to its low cost, high sensitivity, and brightness. Moreover, these tools are unique and valuable as they can detect even the slightest changes in the cellular microenvironment. To achieve this, a fluorescent probe with strong tumor uptake and high spatial and temporal resolution, especially with high water solubility, is highly demanded. Recently, several water-soluble molecules with emission windows in the visible (400-700 nm), first near-infrared (NIR-I, 700-1000 nm), and second near-infrared (NIR-II, 1000-1700 nm) windows have been reported in literature. This review highlights recently reported water-soluble small organic fluorophores/dyes with applications in cancer diagnosis and therapeutics. We systematically highlight and describe the key concepts, structural classes of fluorophores, strategies for imparting water solubility, and applications in cancer therapy and diagnosis, i.e., theragnostics. We discuss examples of water-soluble fluorescent probes based on coumarin, xanthene, boron-dipyrromethene (BODIPY), and cyanine cores. Some other emerging classes of dyes based on carbocyclic and heterocyclic cores are also discussed. Besides, emerging molecular engineering methods to obtain such fluorophores are discussed. Finally, the opportunities and challenges in this research area are also delineated.

Work Function-Guided Electrocatalyst Design.

The development of high-performance electrocatalysts for energy conversion reactions is crucial for advancing global energy sustainability. The design of catalysts based on their electronic properties (e.g., work function) has gained significant attention recently. Although numerous reviews on electrocatalysis have been provided, no such reports on work function-guided electrocatalyst design are available. Herein, a comprehensive summary of the latest advancements in work function-guided electrocatalyst design for diverse electrochemical energy applications is provided. This includes the development of work function-based catalytic activity descriptors, and the design of both monolithic and heterostructural catalysts. The measurement of work function is first discussed and the applications of work function-based catalytic activity descriptors for various reactions are fully analyzed. Subsequently, the work function-regulated material-electrolyte interfacial electron transfer (IET) is employed for monolithic catalyst design, and methods for regulating the work function and optimizing the catalytic performance of catalysts are discussed. In addition, key strategies for tuning the work function-governed material-material IET in heterostructural catalyst design are examined. Finally, perspectives on work function determination, work function-based activity descriptors, and catalyst design are put forward to guide future research. This work paves the way to the work function-guided rational design of efficient electrocatalysts for sustainable energy applications.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution.

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Photoactivated Circularly Polarized Luminescent Organic Radicals in Doped Amorphous Polymer.

Luminescent organic radicals, especially those with photoactivated circularly polarized luminescence (CPL) features, hold great significance for cutting-edge optoelectronic applications, but their development still remains a challenge. In this study, we propose a novel strategy to achieve photoactivated CPL radicals by bonding two phosphine centers within an axial chiral system, yielding a compound of R/S-5,5-bis(diphenylphosphino)-4,4'-bibenzo[d][1,3]dioxole (R/S-BDP). The photoactivated R/S-BDP molecules in polymer matrix display a robust quantum yield of 19.8 % and a dissymmetry factor (glum) of 1.2×10-4, marking this work as the first example of photoactivated CPL radicals. Furthermore, the glum is improved to 1.0×10-2 by using a liquid crystal as host. Experimental and theoretical analyses reveal that R/S-BDP molecules, endowed with double phosphine cores in axial chirality, offer a direct way for intramolecular electron transfer upon photoirradiation. This leads to the generation of radical ionic pairs, which subsequently trigger the donor-acceptor arrangement through intermolecular electron transfer, thereby resulting in stable radical emission. The extended photoactivated BDP-F exhibits a remarkably high quantum efficiency of 57.8%. Ultimately, the distinctive photo-responsive CPL radical luminescence has been successfully used for information displays and anti-counterfeiting.

Synthesis, Characterization, Cytotoxicity, Cellular Imaging, Molecular Docking, and ADMET Studies of Piperazine-Linked 1,8-Naphthalimide-Arylsulfonyl Derivatives.

To reduce the mortality and morbidity associated with cancer, new cancer theranostics are in high demand and are an emerging area of research. To achieve this goal, we report the synthesis and characterization of piperazine-linked 1,8-naphthalimide-arylsulfonyl derivatives (SA1-SA7). These compounds were synthesized in good yields following a two-step protocol and characterized using multiple analytical techniques. In vitro cytotoxicity and fluorescent cellular imaging of the compounds were assessed against non-cancerous fibroblast (3T3) and breast cancer (4T1) cell lines. Although the former study indicated the safe nature of the compounds (viability = 82-95% at 1 µg/mL), imaging studies revealed that the designed probes had good membrane permeability and could disperse in the whole cell cytoplasm. In silico studies, including molecular docking, molecular dynamics (MD) simulation, and ADME/Tox results, indicated that the compounds had the ability to target CAIX-expressing cancers. These findings suggest that piperazine-linked 1,8-naphthalimide-arylsulfonyl derivatives are potential candidates for cancer theranostics and a valuable backbone for future research.

Large-Area Fabrication of Hexaazatrinaphthylene-Based 2D Metal-Organic Framework Films for Flexible Photodetectors and Optoelectronic Synapses.

2D conjugated metal-organic frameworks (c-MOFs) have emerged as promising materials for (opto)electronic applications due to their excellent charge transport properties originating from the unique layered-stacked structures with extended in-plane conjugation. The further advancement of MOF-based (opto)electronics necessitates the development of novel 2D c-MOF thin films with high quality. Cu-HHHATN (HHHATN: hexahydroxyl-hexaazatrinaphthylene) is a recently reported 2D c-MOF featuring high in-plane conjugation, strong interlayer π-π stacking, and multiple coordination sites, while the production of its thin-film form has not yet been reported. Herein, large-area Cu-HHHATN thin films with preferential orientation, high uniformity, and smooth surfaces are realized by using a convenient layer-by-layer growth method. Flexible photodetectors are fabricated, showing broadband photoresponse ranging from UV to short-wave infrared (370 to 1450 nm). The relatively long relaxation time of photocurrent, which arises from the trapping of photocarriers, renders the device's synaptic plasticity similar to that of biological synapses, promising its use in neuromorphic visual systems. This work demonstrates the great potential of Cu-HHHATN thin films in flexible optoelectronic devices for various applications.

Eagle jugular syndrome presenting with intracranial hypertension - Diagnosis and illustration of pathophysiology by multi-modality imaging.

Eagle jugular syndrome is an uncommon condition caused by compression of an elongated styloid process onto the internal jugular vein. Its presentation is non-specific but may represent in severe clinical consequences including venous thrombosis and intracranial haemorrhage. Thorough understanding of local anatomy is important in understanding the pathogenesis and establishing the diagnosis. Our case reported here illustrates the use of multimodality imaging, including dynamic Computer tomography manoeuvre, in identifying the site of obstruction and guidance towards successful surgical treatment.

Ruthenium-Catalyzed 1,6-Hydroalkylation of para-Quinone Methides with Ketones via the in Situ Activation of C(sp3)-H Bonds.

A simple and efficient method for the ruthenium-catalyzed 1,6-hydroalkylation of para-quinone methides (p-QMs) with ketones via the in situ activation of C(sp3)-H bonds has been disclosed. Without the need for preactivation of the substrates and oxidant, a broad range of p-QMs and ketones are well tolerated, producing the expected 1,6-hydroalkylation products with moderate to good yields. Step-by-step control experiments and DFT calculation were conducted systematically to gain insights for the plausible reaction mechanism. This finding may have potential application in the selective diarylmethylation of ketones at the α-C position in organic synthesis.

Copper-Catalyzed Aerobic Oxidative/Decarboxylative Phosphorylation of Aryl Acrylic Acids with P(III)-Nucleophiles.

A copper-catalyzed aerobic oxidative/decarboxylative phosphorylation of aryl acrylic acids with P(III)-nucleophiles via the Michaelis-Arbuzov rearrangement for the synthesis of ß-ketophosphine oxides, ß-ketophosphinates, and ß-ketophosphonates is reported. The present reaction could be conducted effectively without the use of a ligand and a base. Various kinds of aryl acrylic acids and P(III)-nucleophiles are tolerated in the transformation, generating the desired ß-keto-organophosphorus compounds as a valuable class of phosphorus-containing intermediates with good to excellent yields. In addition, the possible mechanism and kinetic studies for the reaction have been explored by step-by-step control experiments and competitive experiments, and the results proved that this transformation may follow second-order chemical kinetics as well as involve a radical process.

The Novel Organic Emitters for High-Performance Narrow-Band Deep Blue OLEDs.

Narrow-band deep-blue organic light-emitting diodes (OLEDs) have played a key role in the field of high-quality full-color displays. However, because of the considerable challenges of inherent band gaps, unbalanced carrier injection and the lack of molecular structures, narrow-band deep-blue emitters develop slowly compared with red- and green-emitting materials. Encouragingly, with the continuous efforts of scientists in recent years, great progress has been made in the molecule design and material synthesis of highly efficient narrow-band deep-blue emitters. The typical deep-blue emitters which exhibit narrow emission with a full width at half maximum of < 50 nm are summarized in this article. They are divided into the three categories: fluorescence, phosphorescence and thermally activated delayed fluorescence. The methods of molecular design for realizing narrow-band deep-blue emission are described in detail and future research directions are also discussed in this article.

Efficient 1-(thiophen-2-yl)isoquinoline-based ionic iridophosphors with bulky counterions for solution-processed deep-red electroluminescence.

A pair of high-efficiency deep-red emissive ionic iridophosphors (Ira and Irb) showing high photoluminescence quantum yields (PLQYs) are rationally designed by using 1-(thiophen-2-yl)isoquinoline as the cyclometalating ligand. Two bulky tetraarylborate anions (tetraphenylborate and tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) are selected to improve their PLQYs in both solution and aggregated states, which enables efficient electroluminescence via a solution-processed approach. The variation of the tetraarylborate anions also aims to tune the photophysical properties of these deep-red emissive iridophosphors. Both ionic iridophosphors emit intense deep-red room-temperature phosphorescence in both solution and aggregated states. The phosphorescence spectra of both complexes are similar (630 nm with a shoulder emission of 686 nm) in CH2Cl2, originating from the same cationic species of the complexes. Both complexes show high PLQYs in CH2Cl2 (0.41 for Ira, 0.43 for Irb) and neat films (0.27 for Ira, 0.34 for Irb). Moreover, they serve as triplet emitters to evaluate their performance in solution-processed deep-red electroluminescent devices. The maximum external quantum efficiencies for the deep-red electroluminescence are 7.3% with an emission maximum of 649 nm for Ira, and 10.2% with an emission maximum of 635 nm for Irb, respectively, implying that they are good candidates for high-performance electroluminescence.

Two new red-emitting ternary europium(III) complexes with high photoluminescence quantum yields and exceptional performance in OLED devices.

Two new organo-europium complexes (OEuCs) [Eu(btfa)3(Bathphen)] (OEuC-1) and [Eu(tta)3(Bathphen)] (OEuC-2) where btfa and tta are the anions of 4,4,4-trifluoro-1-phenyl-1,3-butanedione and 2-thenoyltrifluoroacetone while Bathphen = Bathophenanthroline have been synthesized and characterized. Both complexes in the solid state exhibit strong red emissions with photoluminescence quantum yields (PLQYs) of 80% ± 10%. These complexes were tested as dopants in the emitting layer (EML) to fabricate red organic light emitting diodes (R-OLEDs). Through device engineering involving the amalgamation of appropriate host materials and complexes, we have achieved exceptional overall R-OLED performance for an OEuC-2 based device, with maximum current efficiency (CEmax) = 9.91 cd A-1, maximum power efficiency (PEmax) = 9.15 lm W-1, maximum external quantum efficiency (EQEmax.) = 6.24%, brightness (B) of 545 cd m-2, and (CIE)x,y = 0.620, 0.323 at J = 10 mA cm-2.

Efficient Red Organic Light Emitting Diodes of Nona Coordinate Europium Tris(ß-Diketonato) Complexes Bearing 4'-Phenyl-2,2':6',2''-Terpyridine.

Two novel nona-coordinated Eu(III) complexes [Eu(btfa)3 (Ph-TerPyr)] (Eu-1) and [Eu(NTA)3 (Ph-TerPyr)] (Eu-2) have been synthesized and characterized. The structure of the complexes was elucidated by density functional theory (DFT) methods. The experimental photophysical properties of the complexes were investigated and complemented with theoretical calculations. Effective energy transfer (ET) pathways for the sensitized red luminescence is discussed. The complexes were tested as emitting layers (EML) in organic light emitting diodes (OLEDs). At the optimum doping concentration of 4 wt.%, the double-EML OLEDs of Eu-1 exhibited red electroluminescence (EL) with an EQE of 4.0 % and maximum brightness (B)=1179 cd/m2 , maximum current efficiency (ηc )=5.64 cd/A, and maximum power efficiency (ηp )=4.78 lm/W at the current density (J) of 10 mA/cm2 . Interestingly, the double-EML OLEDs of Eu-2 at the optimum concentration of 3 wt.%, displayed an outstanding EL performance with EQE of 7.32 % and B=838 cd/m2 , ηc =10.19 cd/A and ηp =10.33 lm/W at J=10 mA/cm2 . The EL performance of this device is among the best reported for devices incorporating a europium complex as a red emitter.

A Cobalt-Based Metal-Organic Framework Nanosheet as the Electrode for High-Performance Asymmetric Supercapacitor.

Inspired by the significant advantages of the bottom-up synthesis whose structures and functionalities can be customized by the selection of molecular components, a 2D metal-organic framework (MOF) nanosheet Co-BTB-LB has been synthesized by a liquid-liquid interface-assisted method. The as-prepared Co-BTB-LB is identified by scanning electron microscopy/energy dispersive spectroscopy (SEM/EDX) and X-ray photoelectron spectroscopy (XPS), and the sheet-like structure is verified by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM). Co-BTB-LB electrode exhibits an excellent capacity of 4969.3 F g-1 at 1 A g-1 and good cycling stability with 75% capacity retention after 1000 cycles. The asymmetric supercapacitor device with Co-BTB-LB as the positive electrode shows a maximum energy density of 150.2 Wh kg-1 at a power density of 1619.2 W kg-1 and good cycling stability with a capacitance retention of 97.1% after 10000 cycles. This represents a state-of-the-art performance reported for asymmetric supercapacitor device using electroactive bottom-up metal-complex nanosheet, which will clearly lead to a significant expansion of the applicability of this type of 2D nanomaterials.

Integrating Asymmetric O-B-N Unit in Multi-Resonance Thermally Activated Delayed Fluorescence Emitters towards High-Performance Deep-Blue Organic Light-Emitting Diodes.

Developing deep-blue thermally activated delayed fluorescence (TADF) emitters with both high efficiency and color purity remains a formidable challenge. Here, we proposed a design strategy by integrating asymmetric oxygen-boron-nitrogen (O-B-N) multi-resonance (MR) unit into traditional N-B-N MR molecules to form a rigid and extended O-B-N-B-N MR π-skeleton. Three deep-blue MR-TADF emitters of OBN, NBN and ODBN featuring asymmetric O-B-N, symmetric N-B-N and extended O-B-N-B-N MR units were synthesized through the regioselective one-shot electrophilic C-H borylation at different positions of the same precursor. The proof-of-concept emitter ODBN exhibited respectable deep-blue emission with Commission International de l'Eclairage coordinate of (0.16, 0.03), high photoluminescence quantum yield of 93 % and narrow full width at half maximum of 26 nm in toluene. Impressively, the simple trilayer OLED employing ODBN as emitter achieved a high external quantum efficiency up to 24.15 % accompanied by a deep blue emission with the corresponding CIE y coordinate below 0.1.