Mechanistic study on the effect of hydroxypropyl corn starch, guar gum and compound phosphates on the freeze-thaw quality of quick-frozen kuey teow.

Kuey teow is one of the delicacies of Guangdong, China and is a gluten-free noodle dish made from rice. It has a short storage period and extending the shelf life by quick freezing induces quality deterioration due to temperature fluctuations. To improve its freeze-thaw frozen storage quality, this paper examined the effects of hydroxypropyl corn starch (HCS), guar gum (GG), and compound phosphates (CP) on the quality of quick-frozen kuey teow during freeze-thaw cycles. The mechanism was investigated by identifying changes in the moisture status, aging degree of the starch, and textural and cooking characteristics. The results showed that all three additions improved the toughness, chewiness and steaming characteristics of the kuey teow, with CP significantly enhancing chewiness. XRD and FTIR results revealed that GG more significantly inhibited the decrease of starch crystallinity, while HCS inhibited starch aging. GG, HCS and CP all improved the hydration characteristics and water holding capacity of rice starch. GG enhances the ability of starch to bind more tightly with water, resulting in a more uniform water distribution and a more continuous and tight structure of the kuey teow. This study will provide a theoretical basis for compounding and optimizing the quick-freezing of kuey teow.

Effects of protein variations by different extraction and dehydration approaches on hempseed protein isolate: Protein pattern, amino acid profiling and label-free proteomics.

This study evaluates the effects of alkaline and micellisation extraction methods, alongside freeze-drying and spray-drying, on the protein subunits, amino acid profiles, and proteome data of hempseed protein isolate (HPI). Findings revealed that the extraction methods affect protein profiles more than the drying methods. Micellisation-extracted HPI showed higher albumin, oleosin, and sulphur-containing protein levels than alkaline-extracted HPI. The alkali-extracted undried sample (AU) gave more potentially allergenic proteins, including Hsp70 and triosephosphate isomerase, than its micellization-extracted counterpart (MU). Unique potential allergens were identified, including malate dehydrogenase and enolase in AU, and RuBisCo in MU samples. Both drying processes impacted the HPI proteome and reduced RuBisCo in the micellisation-extracted HPI. These insights highlight the crucial role of method selection in HPI processing for optimising production in the food industry.

The effect of rice protein-polyphenols covalent and non-covalent interactions on the structure, functionality and in vitro digestion properties of rice protein.

The characteristics of the crosslinking between rice protein (RP) and ferulic acid (FA), gallic acid (GA), or tannin acid (TA) by covalent binding of Laccase and non-covalent binding were evaluated. The RP-polyphenol complexes greatly improved the functionality of RP. The covalent effect with higher polyphenol binding equivalence showed higher emulsion activity than the non-covalent effect. The solubility, and antioxidant activity of covalent binding were higher than that of non-covalent binding in the RP-FA group, but there was a contrasting behavior in the RP-GA group. The RP-FA was most soluble in conjugates, while the RP-GA had the highest solubility in mixtures. It was found that the covalent complexes were more stable in the intestinal tract. The content of polyphenols in the RP-TA group was rapidly increased at the later intestinal digestion, which indicated the high polyphenol-protective effect in this group. Meanwhile, the RP-TA group showed high reducing power but low digestibility.

Nanofood Process Technology: Insights on How Sustainability Informs Process Design.

Nanostructured products are an actively growing area for food research, but there is little information on the sustainability of processes used to make these products. In this Review, we advocate for selection of sustainable process technologies during initial stages of laboratory-scale developments of nanofoods. We show that selection is assisted by predictive sustainability assessment(s) based on conventional technologies, including exploratory ex ante and "anticipatory" life-cycle assessment. We demonstrate that sustainability assessments for conventional food process technologies can be leveraged to design nanofood process concepts and technologies. We critically review emerging nanostructured food products including encapsulated bioactive molecules and processes used to structure these foods at laboratory, pilot, and industrial scales. We apply a rational method via learning lessons from sustainability of unit operations in conventional food processing and critically apportioned lessons between emerging and conventional approaches. We conclude that this method provides a quantitative means to incorporate sustainability during process design for nanostructured foods. Findings will be of interest and benefit to a range of food researchers, engineers, and manufacturers of process equipment.

Preparation of carboxymethylcellulose / ZnO / chitosan composite hydrogel microbeads and its drug release behaviour.

In this study, a novel carboxymethylcellulose / ZnO / chitosan (CMC / ZnO / Cs) hydrogel microbeads loaded with crosslinked porous starch / curcumin (CPS / Cur) were designed and prepared to improve the encapsulation efficiency of curcumin for drug delivery to specific sites. It was found that the total pore volume of crosslinked porous starch (CPS) was increased by 1150 % when compared to the native starch (NS), and the adsorption ratio of curcumin by CPS was enhanced by 27 % when compared to NS. Secondly, the swelling ratio of composite hydrogel microbeads was within 25 % in an acidic environment at pH 1.2, and the swelling ratio of hydrogel microbeads sharply increased to 320 % ~ 370 % at pH 6.8 and 7.4. In addition, the results of in vitro simulated release experiments showed that the released amount of hydrogel microbeads loaded with NS/Cur and CPS/Cur in SGF were within 7 % in simulated gastric fluid (SGF). The highest released amount of curcumin was 65.26 % for hydrogel beads loaded with CPS/Cur, which was 26 % lower than that of hydrogel microbeads loaded with Cur in simulated intestinal fluid (SIF). In simulated colonic fluid (SCF), the released amount of hydrogel microbeads loaded with CPS/Cur and Cur were 73.96 % and 91.69 %, respectively. In conclusion, pH-sensitive drug delivery system with good drug stability and bioavailability were successfully prepared with carboxymethylcellulose / ZnO / chitosan bead, suitable targeting drug delivery to the small intestine.

The role of urea on the dissolution of starch in NaOH-urea aqueous solutions.

Potato starch can be dissolved in NaOH-urea aqueous solutions to form a stable and homogeneous mixture to initiate further modification. The mechanism for the formation of such a solution was investigated by examining the interactions between urea and starch, using rheological tests, 13C NMR, FTIR, and a novel Kamlet-Taft solvation parameter analysis. It was found that the optimized dissolution condition was in aqueous 10% w/w NaOH-14% w/w urea, under which 97.4% light transmission was achieved. This was due to dispersive forces between urea and starch without the presence of strong hydrogen bond based interactions. DSC results further showed that the subtle dissolving facilitation of urea might be attributed to the heat released during urea hydrate formation. Compared with conventional hydrothermal gelatinized starch, the starch-NaOH-urea aqueous dispersion exhibited better stability. This highlighted the role of urea in forming a 'bridge' to combine starch with water molecules. This reduces the tendency for starch aggregation via its hydrophobic components. Intrinsic viscosity and GPC analysis indicated that the degradation of starch molecules was significantly reduced. This work provides new insights into the role of urea in starch-NaOH-urea aqueous dispersion. This type of starch solvent formulation will have significant potential for further preparation of starch-based materials for various applications.

Pulsed electric field improves the EGCG binding ability of pea protein isolate unraveled by multi-spectroscopy and computer simulation.

Understanding molecular mechanisms during protein modification is critical for expanding the application of plant proteins. This study investigated the conformational change and molecular mechanism of pea protein isolate (PPI) under pulsed electric field (PEF)-assisted (-)-Epigallocatechin-Gallate (EGCG) modification. The flexibility of PPI was significantly enhanced after PEF treatment (10 kV/cm) with decrease (23.25 %) in α-helix and increase (117.25 %) in random coil. The binding constant and sites of PEF-treated PPI with EGCG were increased by 2.35 times and 10.00 % (308 K), respectively. Molecular docking verified that PEF-treated PPI had more binding sites with EGCG (from 4 to 10). The number of amino acid residues involved in hydrophobic interactions in PEF-treated PPI-EGCG increased from 5 to 13. PEF-treated PPI-EGCG showed a significantly increased antioxidant activity compared to non-PEF-treated group. This work revealed the molecular level of PEF-assisted EGCG modification of PPI, which will be significant for the application of PPI in food industry.

Combining pulsed electric field and cross-linking to enhance the structural and physicochemical properties of corn porous starch.

In this study, corn porous starch (CPS) was firstly prepared using enzymatic hydrolysis, followed by pore formation enhancement using the treatment of a pulsed electric field (PEF). Subsequently, the PEF treated porous starch (CPS-PEF) was cross-linked with sodium trimetaphosphate (STMP) to investigate its structural and functional properties. The results showed PEF treatment increased the oil absorption of CPS by 26.92% and improved its specific surface area, total pore volume value, solubility and swelling power. After cross-linking of the CPS-PEF, C-O-P covalent bonds were formed between CPS-PEF molecules, resulting in a further increase in oil absorption and specific surface area properties. Moreover, the covalent bonds enhanced the intermolecular forces, resulting in increased thermal stability of the cross-linked porous starch (ScPS). The double modification resulted in significantly improved adsorption properties and better thermal stability of the ScPS, indicating that the double modification is an effective method for the preparation of porous starches.

The microstructure and thermal properties of pulsed electric field pretreated oxidized starch.

The structure and thermal properties of pulsed electric field (PEF) assisted sodium hypochlorite oxidized starch were investigated. The carboxyl content of the oxidized starch was increased by 25 % when compared with the traditional oxidation method. Dents and cracks were evident on the surface of the PEF-pretreated starch. Compared with native starch, the peak gelatinization temperature (Tp) of PEF-assisted oxidized starch (POS) was reduced by 10.3 °C, while that of the oxidized starch without PEF treatment (NOS) was only reduced by 7.4 °C. In addition, PEF treatment further reduces the viscosity and improve the thermal stability of the starch slurry. Therefore, PEF treatment combined with hypochlorite oxidation is an effective method to prepare oxidized starch. PEF showed great potential in expanding starch modification, to promote a wider application of oxidized starch in the paper, the textile and the food industry.

The effects of pulsed electric fields treatment on the structure and physicochemical properties of dialdehyde starch.

The structural and physicochemical properties changes of corn starch oxidized by sodium periodate under the assistance of pulsed electric fields (PEF) were studied. It was found that dialdehyde starch (DAS) particles produced by PEF-assisted oxidation exhibited shrinkage and pits, and had a larger particle size when compared to the control without PEF. The solubility of the DAS (12 kV/cm PEF- assisted oxidation) improved by 70.2% when compared to the native starch. Increment in the strength of the PEF, led to a decrease in the viscosity of the DAS. In addition, the aldehyde group content of the DAS produced by PEF-assisted oxidation exhibited shrinkage and pits, and had a larger particle size when compared to the control increased by 11.6% when compared with the traditional oxidation method. PEF is an effective method to promote oxidation reaction of starch.

Whey protein hydrolysates as prebiotic and protective agent regulate growth and survival of Lactobacillus rhamnosus CICC22152 during spray/freeze-drying, storage and gastrointestinal digestion.

BACKGROUND: Probiotic products are receiving increasing attention because of their tremendous beneficial health effects. However, it is still a great challenge to preserve probiotic viability during processing, storage and gastrointestinal digestion. Encapsulation is a widely known technology for enhancing bacterial viability and product stability. Hence highly hydrolyzed whey protein hydrolysate (HWPH) and moderately hydrolyzed whey protein hydrolysate (MWPH) used as a one-step culture medium and wall material for Lactobacillus rhamnosus were investigated. RESULTS: H/MWPH-substitutive medium for the growth of Lactobacillus rhamnosus presented double the biomass production compared to other media. The H/MWPH-substitutive medium in combination with freeze drying also led to the highest survival ratio (97.13 ± 9.16%) and cell viability (10.62 log CFU g-1 ). The highest survival rate of spray-dried cells was 85.56 ± 7.4%. In addition, the cell viability of spray-dried Lactobacillus rhamnosus with MWPH as culture and dry medium was 0.79 log CFU g-1 higher than that of HWPH. Images confirmed that spray-dried Lactobacillus rhamnosus in MWPH provided better protection and it showed greater sustained viability after gastrointestinal digestion. CONCLUSION: Overall, WPH just as carrier provides better thermal protection and MWPH is a preferable two-in-one medium for probiotics. © 2022 Society of Chemical Industry.

The antihyperglycemic effect of pulsed electric field-extracted polysaccharide of Kaempferia elegans officinale on streptozotocin induced diabetic mice.

Kaempferia elegans polysaccharide (KEP) was extracted using a high-voltage pulsed electric field-assisted hot water method. Its physicochemical properties, in vitro activity and hypoglycemic effect was investigated. Experiments were undertaken with diabetic mice models and the potential mechanism of KEP to improve blood glucose levels was unveiled through measurements of relevant indicators in the serum and liver of the mice. Results showed that KEP is mainly composed of glucose, rhamnose, arabinose, and galactose. It has certain DPPH and ABTS free radical scavenging ability and good α-glucosidase inhibitory ability, indicating that KEP has the potential to improve blood glucose levels in diabetes patients. The experimental results of KEP treatment on mice showed that KEP could control the continuous increase of fasting blood glucose levels. The potential mechanisms behind this blood glucose level control composes of (1) increasing the glucokinase and C peptide levels and decreasing Glucose-6-phosphatase content for improving key enzyme activity in the glucose metabolism pathway. This promotes the consumption of blood glucose during glycolysis, thereby inhibiting the production of endogenous glucose in gluconeogenesis pathway; (2) reducing triglyceride, total cholesterol, low density lipoprotein cholesterol, and increasing high density lipoprotein cholesterol content, for regulating blood lipid indicators to normal levels; and (3) by improving the activities of catalase, glutathione peroxidase, and antioxidant enzymes superoxide dismutase for further improving the antioxidant defense system in the body to reduce blood glucose.

Exploring the interactions between Lactobacillus rhamnosus GG and whey protein isolate for preservation of the viability of bacteria through spray drying.

Protective agents used in spray drying protect the activity of lactic acid bacteria (LAB) by stabilizing the subcellular structures, constituting a protective layer at the cellular surface, or having mild drying kinetics. The effects of a reputed protectant, whey protein isolate (WPI), on Lactobacillus rhamnosus GG (LGG) were examined by exposing the cells to WPI solution to induce protein adsorption at the cellular surface prior to spray drying. WPI-treated LGG demonstrated enhanced thermotolerance with cell survival increased by 1.64 log after heat treatment. The survival after spray drying was significantly decreased from 45.75% to 8.6% and from 32.96% to 10.44%, when the WPI-treated cells were resuspended in trehalose solution or reconstituted skimmed milk as protectant, respectively, associated with decreased growth capability and metabolic activity. The contact with WPI appeared to stimulate the cellular response of LGG. With well-maintained cell viability and intact cellular membrane, the metabolic activity of WPI-treated LGG was decreased, and subsequent resuspension of the cells in trehalose solution led to a reduction in the stability of the cellular surface charge. The WPI-treated cells showed marginally increased surface roughness, indicating possible WPI attachment, but there was no thick protein coverage at the cellular surface and the size distribution of cells was unaffected. It was proposed that the enhanced thermotolerance and the decreased survival of spray-dried LGG could be linked to the cellular response toward WPI and protectant media, which may vary among individual LAB strains. Modulating the strain-specific interactions between the LAB cells and the protectant constituents could be crucial to maximizing cell viability retention after spray drying.

High-mechanical strength carboxymethyl chitosan-based hydrogel film for antibacterial wound dressing.

Hydrogels, being highly biocompatible and adaptable with biological tissues, have shown great usability in biomedical applications. In this research, a novel hydrogel film developed from carboxymethyl chitosan (CMCS) loaded with waterborne polyurethane-gelatin hydrolysate was synthesized via aqueous emulsion copolymerization. The synthesized hydrogel film was characterized using mechanical strength tests, FTIR, XPS, SEM, AFM, and various other analysis technologies. The results demonstrated that the hydrogel film exhibited good thermal stability, swelling behavior, as well as controllable biodegradability. Specifically, when the CMCS content was loaded at 6 %, the maximum tensile strength and elongation at the break of the hydrogel film were reached 31.69 MPa and 447.187, respectively. The disk diffusion tests indicated that the hydrogel film presented significant antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). These results indicate that hydrogel films with high mechanical strength and high antibacterial activity could be used for wound dressing applications.

On improving bioaccessibility and targeted release of curcumin-whey protein complex microparticles in food.

Curcumin is a bioactive food component, with poor bioaccessibility due to low water solubility and stability. Spray drying retained and in fact enhanced curcumin-whey protein isolate (WPI) complexation via desolvation, lowering the amount of unbound curcumin to <5% wt after drying, forming microparticles with better water solubility, stability, and bioaccessibility than raw curcumin. The desolvated microparticles encapsulated 3.47 ± 0.05 mg/g curcumin, almost one order of magnitude higher than the un-desolvated sample 0.37 ± 0.03 mg/g. After incorporation into yogurt, the rapid-release formula liberated 87% curcumin, whereas the targeted-release one discharged 44% before entering the simulated intestinal condition. Most of the yogurt sensory properties were not adversely affected, except for colour and curcumin flavour. This study proposed a strategy in which food ingredients containing hydrophobic bioactive small molecules can be incorporated into a food matrix to improve bioaccessibility and targeted release, without affecting their sensory properties.

Effect of microbial transglutaminase on the structural and rheological characteristics and in vitro digestion of rice glutelin-casein blends.

The effect of microbial transglutaminase (MTGase) in cross-linking and modifying of rice glutelin-casein blends was investigated in this work. The maximum MTGase activity on rice glutelin-casein blends were found when its addition was 15 U/g of protein. Compared with the blends without MTGase, the appropriate addition of MTGase significantly affected the microstructure of the cross-linked proteins, resulting in the gradual 'burying' of Trp residue; while the space for hydrogen bonding was more abundant. Secondary structure changes, denoted by the disappearance of the α-helix and the decrement of the ß-sheet structure, was due to the formation of the large loop and random coil structures. The MTGase-catalyzed reaction improves the protease resistance of the blends but not promote the conversion of free sulfhydryl groups (-SH) to disulfide groups (S-S). All the samples evaluated exhibited Bingham flow behavior instead of shear-thinning behavior, and thermally stable fluid properties dominated by elasticity, regardless of MTGase concentration used. Both the storage modulus (G') and loss modulus (G'') gradually decreased with the addition of MTGase. In short, this work demonstrated how the structure, rheology, digestibility of rice glutelin-casein blends are influenced by MTGase concentration.

Effect of cold and hot enzyme deactivation on the structural and functional properties of rice dreg protein hydrolysates.

This study explored the effect of three different enzyme deactivation treatments: 4 °C slow cold deactivation (RDPH-(4 °C)), -18 °C rapid cold deactivation (RDPH-(-18 °C)) and 100 °C water bath (RDPH-(100 °C)), compared to that without enzyme deactivation (RDPH-(control)) on the structural and functional properties of rice dreg protein hydrolysates (RDPHs). The RDPHs from the different enzyme deactivation methods led to significant differences in the degree of hydrolysis, surface hydrophobicity, average particle size, intrinsic fluorescence and emulsion stability. FTIR analysis revealed that the strength of RDPH-(100 °C) spectrum peaks decreased significantly. All samples showed high solubility (>85%) and potent antioxidant capacity: DPPH (~90%), ABTS (~99%), and reducing power (0.86-1.03). Among the hydrolysates evaluated, the RDPH-(100 °C) led to the lowest reducing power and hydroxyl radical scavenging activity. Results reported here will be instrumental for the development of rice protein-based products and in the optimization and scale up of manufacturing process.

Characterisation of thermal and structural behaviour of lipid blends composed of fish oil and milkfat.

The blend of fish oil with a high percentage of long chain poly-unsaturated fatty acids, and milkfat with a high percentage of saturated fatty acids, could potentially demonstrate desirable characteristics from both components, such as increased omega-3 fatty acids and melting point, as well as improved crystallization and oxidative stability. In this study, the effect of various milkfat concentrations on thermal properties and crystalline structure of these blends were analysed to understand parameters determining the overall characteristics of the blend. Blends with different ratios of fish oil: milkfat (9:1, 7:3, 5:5, 3:7, 1:9), as well as pure fish oil and pure milkfat, were investigated at different cooling conditions. The crystallization behaviour in all samples shifted to lower temperature ranges, by increasing the cooling rate from 1 to 32 °C/min. However, the changes in cooling rate did not have significant effect on the melting profile of the samples. Whereas changes in milkfat ratio affect both the crystallization and melting behaviour. New crystallization peaks were observed on DSC spectra between the range of -4 to -13 °C in the blends. Moreover, new melting peaks appeared in two ranges of -1 to -8 °C and 8-9 °C, in the blends. The crystallization and melting behaviour of the blends were similar to those of milkfat when >30% milkfat was used. This was further confirmed via XRD where milkfat demonstrated the dominant polymorphic behaviour. Regarding shape of the crystals, fractal dimension analysis showed a similarity between clusters in blends containing 50% milkfat or higher. Increasing the ratio of milkfat led to an increase in fractal dimension which indicates higher mass-spatial distribution of the crystal networks in the blends. The data showed that adding 30% or more milkfat to pure fish oil resulted in blends demonstrating similar characteristics to milkfat, including thermal, structural, and oxidative stability. This shows the potential of blending a high percentage of docosahexaenoic acid in milk fat to improve their overall stability.

Relationship between Desalination Performance of Graphene Oxide Membranes and Edge Functional Groups.

High desalination efficiency in principle could be achieved by layer-by-layer graphene oxide (GO) membranes, which benefits from their entrance-functionalized channels assembled by edge-functionalized GO nanosheets. The effects of these edge functional groups on desalination, however, are not fully understood yet. To study the isolated influence of three typical edge functional groups, namely, carboxyl (-COOH), hydroxyl (-OH), and hydrogen (-H), molecular dynamics simulation was used in this work. The results revealed that the edge volumetric blockage effect, resulting in ion permeability at G-H > G-OH > G-COOH membranes, was the dominant mechanistic effect inside the GO membranes with 7 Å interlayer channels. The OH edge has the same effect as the H edge in NaCl/water selectivity because of a unique "ion pulling" effect. Moreover, the OH and H edge-functionalized membranes with 7 Å interlayer channels showed preferential Na+ and Cl- rejections, respectively. This kind of preference leads to a cycle of charging and neutralization in the penetrant reservoir throughout the filtration process. The results from this work suggested that it would be strategic to keep the COOH and H edge functional groups, to maintain the size of interlayer channels in order to stimulate the effects of edge functional groups, and to increase the membrane porosity for designing higher desalination efficiency GO membranes.

Formation of fibrils derived from whey protein isolate: structural characteristics and protease resistance.

The formation of lactoglobulin (ß-lg) fibrils from its native globular form has been investigated hitherto with pure lactoglobulin conditions. For commercially feasible production of ß-lg fibrils for food and therapeutic applications, the effect of impurities (albeit at very small fractions) found in industrial grade lactoglobulin proteins will need to be considered. In this work, food grade whey protein isolate (WPI), with its associated trace globulin and other impurities, was used to study the ß-lg fibril formation process. SDS-PAGE analysis supported by Thioflavin T measurement showed that the WPI fibril formation accompanied by hydrolysis limited the formation reaction rate; further analysis indicated that main impurities especially for α-lactalbumin may affect the intermolecular contacts among ß-lg. The increase of ß-sheet and α-helix conformation analyzed by circular dichroism revealed that the ß strand axis with an α-helix stabilized the linear structure of fibrils. The WPI fibrils exhibited a significant variation in lengths and differences in morphology when compared to some other protein fibrils reported in the literature. Two-stage pepsin followed by pancreatin digestion analysis revealed that the WPI fibrils produced will have the potential as a medium for active compound delivery to the intestinal environment.