RESUMO
The electron paramagnetic resonance (EPR) spectra of lanthanide(III) ions besides Gd3+ , bound to small-molecule and protein chelators, are uncharacterized. Here, the EPR properties of 7 lanthanide(III) ions bound to the natural lanthanide-binding protein, lanmodulin (LanM), and the synthetic small-molecule chelator, 3,4,3-LI(1,2-HOPO) ("HOPO"), were systematically investigated. Echo-detected pulsed EPR spectra reveal intense signals from ions for which the normal continuous-wave first-derivative spectra are negligibly different from zero. Spectra of Kramers lanthanide ions Ce3+ , Nd3+ , Sm3+ , Er3+ , and Yb3+ , and non-Kramers Tb3+ and Tm3+ , bound to LanM are more similar to the ions in dilute aqueous:ethanol solution than to those coordinated with HOPO. Lanmodulins from two bacteria, with distinct metal-binding sites, had similar spectra for Tb3+ but different spectra for Nd3+ . Spin echo dephasing rates (1/Tm ) are faster for lanthanides than for most transition metals and limited detection of echoes to temperatures below ~6 to 12â K. Dephasing rates were environment dependent and decreased in the order water:ethanol>LanM>HOPO, which is attributed to decreasing librational motion. These results demonstrate that the EPR spectra and relaxation times of lanthanide(III) ions are sensitive to coordination environment, motivating wider application of these methods for characterization of both small-molecule and biomolecule interactions with lanthanides.
RESUMO
Thermosetting materials generated by photopolymerization frequently suffer from significant shrinkage stress, are often brittle, and have a limited range of mechanical properties. Various classes of chain transfer agents (CTAs) have been investigated and developed to reduce the cross-linking density of photopolymers by terminating chains and initiating new chains in situ. Although CTAs are successful in manipulating the mechanical properties of photopolymers, they are traditionally consumed during the polymerization and are therefore required in high loadings (up to 20 wt % of the total formulation). Moreover, traditional CTAs frequently contain sulfur, which is malodorous and can create unstable formulations. Presented here is a catalytic, sulfur-free CTA that can be added in ppm quantities to existing commercial monomer feedstocks to create photopolymers similar to those prepared using traditional CTAs, but at 10â¯000-fold lower loadings. These catalysts, which are based on macrocyclic cobaloximes, were found to tunably reduce the molecular weight of the chain proportional to catalyst loading. It was shown, using only commercial monomers, that this catalyst could reduce the glass-transition temperature (Tg), rubbery modulus (E'rubbery), and stiffness of a cross-linked photopolymer while utilizing identical processing conditions and keeping 99.99 wt % of the formulation the same.
RESUMO
Binding of the neurotransmitter acetylcholine to its receptors on muscle fibers depolarizes the membrane and thereby triggers muscle contraction. We sought to understand at the level of three-dimensional structure how agonists and antagonists alter nicotinic acetylcholine receptor conformation. We used the muscle-type receptor from the Torpedo ray to first define the structure of the receptor in a resting, activatable state. We then determined the receptor structure bound to the agonist carbachol, which stabilizes an asymmetric, closed channel desensitized state. We find conformational changes in a peripheral membrane helix are tied to recovery from desensitization. To probe mechanisms of antagonism, we obtained receptor structures with the active component of curare, a poison arrow toxin and precursor to modern muscle relaxants. d-Tubocurarine stabilizes the receptor in a desensitized-like state in the presence and absence of agonist. These findings define the transitions between resting and desensitized states and reveal divergent means by which antagonists block channel activity of the muscle-type nicotinic receptor.
Assuntos
Curare , Receptores Nicotínicos , Animais , Sítios de Ligação , Curare/metabolismo , Músculos/metabolismo , Receptores Nicotínicos/química , Receptores Nicotínicos/metabolismo , Torpedo/metabolismoRESUMO
Nicotinic acetylcholine receptors are members of the Cys-loop superfamily of pentameric ligand-gated ion channels. The electric organ of the Torpedo ray is extraordinarily rich in an acetylcholine receptor that is homologous to the human nicotinic receptor found at the neuromuscular junction. Due to this abundant natural source in the fish and the relatively accessible preparation of the neuromuscular junction (compared to a central synapse), this muscle-type receptor and specifically the fish receptors have long been used as the prototype for study of nicotinic receptors. However, an absence of structural detail at high resolution has limited the chemical interpretation of this archetypal nicotinic receptor. One of the main concerns in preparing receptor for high resolution structural analysis was its documented sensitivity to particular detergents and requirements for specific lipids in order to maintain function after reconstitution in a membrane. Here, we present methods for purifying native nicotinic receptor from Torpedo electric tissue that maintains functionality after reconstitution and that is amenable to high resolution structural analysis. The specific developments we describe include detergent exchange during purification, inclusion of specific lipids during purification and for nanodisc reconstitution, and synthesis of a new affinity reagent for rapid isolation of receptors.
Assuntos
Canais Iônicos de Abertura Ativada por Ligante , Receptores Nicotínicos , Torpedo , Animais , Proteínas de Peixes/isolamento & purificação , Canais Iônicos de Abertura Ativada por Ligante/isolamento & purificação , Receptores Nicotínicos/isolamento & purificaçãoRESUMO
The nicotinic acetylcholine receptor, a pentameric ligand-gated ion channel, converts the free energy of binding of the neurotransmitter acetylcholine into opening of its central pore. Here we present the first high-resolution structure of the receptor type found in muscle-endplate membrane and in the muscle-derived electric tissues of fish. The native receptor was purified from Torpedo electric tissue and functionally reconstituted in lipids optimal for cryo-electron microscopy. The receptor was stabilized in a closed state by the binding of α-bungarotoxin. The structure reveals the binding of a toxin molecule at each of two subunit interfaces in a manner that would block the binding of acetylcholine. It also reveals a closed gate in the ion-conducting pore, formed by hydrophobic amino acid side chains, located â¼60 Å from the toxin binding sites. The structure provides a framework for understanding gating in ligand-gated channels and how mutations in the acetylcholine receptor cause congenital myasthenic syndromes.
Assuntos
Bungarotoxinas/metabolismo , Órgão Elétrico/metabolismo , Receptores Nicotínicos/metabolismo , Receptores Nicotínicos/ultraestrutura , Animais , Sítios de Ligação , Bungarotoxinas/farmacologia , Carbacol/farmacologia , Microscopia Crioeletrônica , Conformação Molecular , Agonistas Nicotínicos/farmacologia , Antagonistas Nicotínicos/farmacologia , Técnicas de Patch-Clamp , Conformação Proteica , Receptores Nicotínicos/efeitos dos fármacos , TorpedoRESUMO
The ability to behave in a fluidlike manner fundamentally separates thermoset and thermoplastic polymers. Bridging this divide, covalent adaptable networks (CANs) structurally resemble thermosets with permanent covalent crosslinks but are able to flow in a manner that resembles thermoplastic behavior only when a dynamic chemical reaction is active. As a consequence, the rheological behavior of CANs becomes intrinsically tied to the dynamic reaction kinetics and the stimuli that are used to trigger those, including temperature, light, and chemical stimuli, providing unprecedented control over viscoelastic properties. CANs represent a highly capable material that serves as a powerful tool to improve mechanical properties and processing in a wide variety of polymer applications, including composites, hydrogels, and shape-memory polymers. This review aims to highlight the enabling material properties of CANs and the applied fields where the CAN concept has been embraced.
Assuntos
Reologia/métodos , Cinética , Polímeros/química , TemperaturaRESUMO
We report a novel metal-free chemical reduction of CO2 by a recyclable benzimidazole-based organo-hydride, whose choice was guided by quantum chemical calculations. Notably, benzimidazole-based hydride donors rival the hydride-donating abilities of noble-metal-based hydrides such as [Ru(tpy)(bpy)H]+ and [Pt(depe)2H]+. Chemical CO2 reduction to the formate anion (HCOO-) was carried out in the absence of biological enzymes, a sacrificial Lewis acid, or a base to activate the substrate or reductant. 13CO2 experiments confirmed the formation of H13COO- by CO2 reduction with the formate product characterized by 1H NMR and 13C NMR spectroscopy and ESI-MS. The highest formate yield of 66% was obtained in the presence of potassium tetrafluoroborate under mild conditions. The likely role of exogenous salt additives in this reaction is to stabilize and shift the equilibrium toward the ionic products. After CO2 reduction, the benzimidazole-based hydride donor was quantitatively oxidized to its aromatic benzimidazolium cation, establishing its recyclability. In addition, we electrochemically reduced the benzimidazolium cation to its organo-hydride form in quantitative yield, demonstrating its potential for electrocatalytic CO2 reduction. These results serve as a proof of concept for the electrocatalytic reduction of CO2 by sustainable, recyclable, and metal-free organo-hydrides.
Assuntos
Benzimidazóis/química , Dióxido de Carbono/química , Formiatos/química , Di-Hidropiridinas/química , Eletroquímica , Modelos Moleculares , Conformação Molecular , Sais/química , Solventes/químicaRESUMO
The synthesis of thiolactone monomers that mimic natural nucleosides and engage in robust ring opening polymerizations (ROP) is herein described. As each repeat unit contains a thioester functional group, dynamic rearrangement of the polymer is feasible via thiol-thioester exchange, demonstrated here by depolymerization of the polymers and coalescing of two polymers of different molecular weight or chemical composition. This approach constitutes the first step toward a platform that enables for the routine synthesis of sequence controlled polymers via dynamic template directed synthesis.
Assuntos
DNA/química , Lactonas/química , Polimerização , Polímeros/química , Compostos de Sulfidrila/química , DNA/síntese química , Lactonas/síntese química , Modelos Moleculares , Polímeros/síntese química , Compostos de Sulfidrila/síntese químicaRESUMO
Muscle cells sense the mechanical properties of their microenvironment, and these properties can change in response to injury or disease. Hydrogels with dynamic material properties can be used to study the effect of such varying mechanical signals. Here, we report the ability of azadibenzocyclooctyne to undergo a cytocompatible, photoinitiated crosslinking reaction. This reaction is exploited as a strategy for on-demand stiffening of three-dimensional cell scaffolds formed through an initial strain-promoted azide-alkyne cycloaddition. Myoblasts encapsulated in these networks respond to increased matrix stiffness through decreased cell spreading and nuclear localization of Yes-associated protein 1 (YAP). However, when the photocrosslinking reaction is delayed to allow cell spreading, elongated myoblasts display increased YAP nuclear localization.
Assuntos
Compostos Aza/química , Reagentes de Ligações Cruzadas/química , Ciclo-Octanos/química , Hidrogéis/química , Mecanotransdução Celular , Mioblastos/citologia , Sobrevivência Celular , Humanos , Estrutura Molecular , Processos FotoquímicosRESUMO
The original version of this Article contained errors in Fig. 3. In Fig. 3a, the word 'fluid' in grey was incorrectly given as 'solid' in green, below that, 'solid' in green was previously 'fluid' in grey. Also, the label on the arrow incorrectly read 'TMG (1 mol%) HABI-Cl (3 mol%) 455 nm, 1 min'; the correct version reads 'TMG (1 mol%) HABI-O-n-oct (4 mol%) 455 nm, 4 min'. In the accompanying legend, the word 'photobase' was originally incorrectly given as 'photoacid'. Additionally, in Fig. 3b, the label on the central image was 'As is: solid', rather than the correct 'As is: fluid'. This has been corrected in both the PDF and HTML versions of the Article.
RESUMO
Liquid crystalline (LC) elastomers (LCEs) enable large-scale reversible shape changes in polymeric materials; however, they require intensive, irreversible programming approaches in order to facilitate controllable actuation. We have implemented photoinduced dynamic covalent chemistry (DCC) that chemically anneals the LCE toward an applied equilibrium only when and where the light-activated DCC is on. By using light as the stimulus that enables programming, the dynamic bond exchange is orthogonal to LC phase behavior, enabling the LCE to be annealed in any LC phase or in the isotropic phase with various manifestations of this capability explored here. In a photopolymerizable LCE network, we report the synthesis, characterization, and exploitation of readily shape-programmable DCC-functional LCEs to create predictable, complex, and fully reversible shape changes, thus enabling the literal square peg to fit into a round hole.
RESUMO
Classical materials readily switch phases (solid to fluid or fluid to gas) upon changes in pressure or heat; however, subsequent reversion of the stimulus returns the material to their original phase. Covalently cross-linked polymer networks, which are solids that do not flow when strained, do not change phase even upon changes in temperature and pressure. However, upon the addition of dynamic cross-links, they become stimuli responsive, capable of switching phase from solid to fluid, but quickly returning to the solid state once the stimulus is removed. Reported here is the first material capable of a bistable switching of phase. A permanent solid to fluid transition or vice versa is demonstrated at room temperature, with inherent, spatiotemporal control over this switch in either direction triggered by exposure to light.
RESUMO
Ductile, cross-linked films were folded as a means to program temporary shapes without the need for complex heating cycles or specialized equipment. Certain cross-linked polymer networks, formed here with the thiol-isocyanate reaction, possessed the ability to be pseudoplastically deformed below the glass transition, and the original shape was recovered during heating through the glass transition. To circumvent the large forces required to plastically deform a glassy polymer network, we have utilized folding, which localizes the deformation in small creases, and achieved large dimensional changes with simple programming procedures. In addition to dimension changes, three-dimensional objects such as swans and airplanes were developed to demonstrate applying origami principles to shape memory. We explored the fundamental mechanical properties that are required to fold polymer sheets and observed that a yield point that does not correspond to catastrophic failure is required. Unfolding occurred during heating through the glass transition, indicating the vitrification of the network that maintained the temporary, folded shape. Folding was demonstrated as a powerful tool to simply and effectively program ductile shape-memory polymers without the need for thermal cycling.
RESUMO
The extracellular matrix (ECM) constitutes a viscoelastic environment for cells. A growing body of evidence suggests that the behavior of cells cultured in naturally-derived or synthetic ECM mimics is influenced by the viscoelastic properties of these substrates. Adaptable crosslinking strategies provide a means to capture the viscoelasticity found in native soft tissues. In this work, we present a covalent adaptable hydrogel based on thioester exchange as a biomaterial for the in vitro culture of human mesenchymal stem cells. Through control of pH, gel stoichiometry, and crosslinker structure, viscoelastic properties in these crosslinked networks can be modulated across several orders of magnitude. We also propose a strategy to alter these properties in existing networks by the photo-uncaging of the catalyst 4-mercaptophenylacetic acid. Mesenchymal stem cells encapsulated in thioester hydrogels are able to elongate in 3D and display increased proliferation relative to those in static networks.
Assuntos
Elasticidade , Ésteres/química , Hidrogéis/química , Luz , Polimerização , Compostos de Sulfidrila/química , Reagentes de Ligações Cruzadas/química , Humanos , Células-Tronco Mesenquimais/citologia , Fenilacetatos/química , Estresse Mecânico , ViscosidadeRESUMO
The effect of amines on the kinetics and efficacy of radical-mediated thiol-ene coupling (TEC) reactions was investigated. By varying the thiol reactant and amine additive, it was shown that amines retard thiyl radical-mediated reactions when the amine is adequately basic enough to deprotonate the thiol affording the thiolate anion, e.g., when the weakly basic amine tetramethylethylenediamine was incorporated in the TEC reaction between butyl 2-mercaptoacetate and an allyl ether at 5 mol %, the final conversion was reduced from quantitative to <40%. Alternatively, no effect is observed when the less acidic thiol butyl 3-mercaptopropionate is employed. The thiolate anion was established as the retarding species through the introduction of ammonium and thiolate salt additives into TEC formulations. The formation of a two-sulfur three-electron bonded disulfide radical anion (DRA) species by the reaction of a thiyl radical with a thiolate anion was determined as the cause for the reduction in catalytic radicals and the TEC rate. Thermodynamic and kinetic trends in DRA formations were computed using density functional theory and by modeling the reaction as an associative electron transfer process. These trends correlate well with the experimental retardation trends of various thiolate anions in TEC reactions.
RESUMO
Photopolymerization is a ubiquitous, indispensable technique widely applied in applications from coatings, inks, and adhesives to thermosetting restorative materials for medical implants, and the fabrication of complex macro-scale, microscale, and nanoscale 3D architectures via additive manufacturing. However, due to the brittleness inherent in the dominant acrylate-based photopolymerized networks, a significant need exists for higher performance resin/oligomer formulations to create tough, defect-free, mechanically ductile, thermally and chemically resistant, high modulus network polymers with rapid photocuring kinetics. This study presents densely cross-linked triazole-based glassy photopolymers capable of achieving preeminent toughness of ≈70 MJ m-3 and 200% strain at ambient temperature, comparable to conventional tough thermoplastics. Formed either via photoinitiated copper(I)-catalyzed cycloaddition of monomers containing azide and alkyne groups (CuAAC) or via photoinitiated thiol-ene reactions from monomers containing triazole rings, these triazole-containing thermosets completely recover their original dimensions and mechanical behavior after repeated deformations of 50% strain in the glassy state over multiple thermal recovery-strain cycles.
RESUMO
Photocleavable liposomes were formed in situ through the coupling of an o-nitrobenzyl-containing azide tail precursor and an alkyne-functionalized lysolipid by the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. Inclusion of the photolabile o-nitrobenzyl-structure enables control over the permeability and morphology of the liposomes. Photolysis of the o-nitrobenzyl group changes the molecular structure of the photolabile phospholipids, inducing phase transitions and permeability increases in the bilayer membrane, ultimately disrupting the liposome entity.
RESUMO
Polymers that possess dynamic covalent bonds activated at ambient conditions are ideal platforms for smart, responsive materials. Herein, a class of dynamic covalent polymerizations is developed based on the thiol-thioester exchange, that is, transthioesterification, reaction. Shifts in the equilibrium extent of the exchange reactions are deliberately utilized to drive the formation of oligomers and polymers. In particular, a series of AB and A2-B2 monomers, including amino acid derivatives, were polymerized rapidly by catalytic amounts of mild bases in various organic solvents under ambient conditions. Thioester backbone oligopeptides, including cysteine and glycine, were obtained with an average repeating unit of four and a PDI of 1.8. Further, structurally dynamic hydrogels were obtained by such reactions between four-armed poly(ethylene glycol)-10000 based monomers in neutral water. These hydrogels showed dynamic, frequency-dependent flow behavior between sol and gel states.
RESUMO
Photoactivated reversible addition fragmentation chain transfer (RAFT)-based dynamic covalent chemistry is incorporated into liquid crystalline networks (LCNs) to facilitate spatiotemporal control of alignment, domain structure, and birefringence. The RAFT-based bond exchange process, which leads to stress relaxation, is used in a variety of conditions, to enable the LCN to achieve a near-equilibrium structure and orientation upon irradiation. Once formed, and in the absence of subsequent triggering of the RAFT process, the (dis)order in the LCN and its associated birefringence are evidenced at all temperatures. Using this approach, the birefringence, including the formation of spatially patterned birefringent elements and surface-active topographical features, is selectively tuned by adjusting the light dose, temperature, and cross-linking density.
RESUMO
Rhodium(II) azavinyl carbenes, conveniently generated from 1-sulfonyl-1,2,3-triazoles, undergo a facile, mild, and convergent formal 1,3-insertion into N-H and O-H bonds of primary and secondary amides, various alcohols, and carboxylic acids to afford a wide range of vicinally bisfunctionalized (Z)-olefins with perfect regio- and stereoselectivity. Utilizing the distinctive functionality installed through these reactions, a number of subsequent rearrangements and cyclizations expand the repertoire of valuable organic building blocks constructed by reactions of transition-metal carbene complexes, including α-allenyl ketones and amino-substituted heterocycles.