Atomic-Level Insights of Polypyrrole Grafted InGaZnO Structure for ppb-Level Ozone Gas Sensing at Low Operating Temperature.

This study explores the utilization of the organic conductive molecule Polypyrrole (PPy) for the modification of Indium Gallium Zinc Oxide (IGZO) nanoparticles, aiming to develop highly sensitive ozone sensors. Pyrrole (Py) molecules undergo polymerization, resulting in the formation of extended chains of PPy that graft onto the surface of IGZO nanoparticles. This interaction effectively diminishes oxygen vacancies on the IGZO surface, thereby promoting the crystallization of the IGZO (1114) facets. The resultant structure exhibits promising potential for achieving high-performance wideband semiconductor gas sensors. The IGZO/PPy device forms a Straddling Gap heterojunction, facilitating enhanced electron transfer between IGZO and ozone molecules. Notably, the adsorption and desorption of ozone gas occur efficiently at a low temperature of approximately 25 °C, obviating the need for additional energy typically associated with wide bandgap semiconductor materials. Density Functional Theory (DFT) calculations attribute this efficiency to the enhanced number of active sites for ozone adsorption, facilitated by hydrogen bonds. The substantial conductivity of PPy, combined with its planar ring structure, induces positively charged polarization on the IGZO side upon ozone adsorption. The resultant device exhibits exceptional sensitivity, boasting a 4-fold improvement compared to sensors reliant solely on IGZO. Additionally, the response time is significantly reduced by a factor of 10, underscoring the practical viability and enhanced performance of the IGZO/PPy sensor field.

Exploring the weak visible-near-infrared and NO2detection capabilities of PbS/Sb2O5heterostructures with DFT interpretations.

The need for photosensors and gas sensors arises from their pivotal roles in various technological applications, ensuring enhanced efficiency, safety, and functionality in diverse fields. In this paper, interlinked PbS/Sb2O5thin film has been synthesized by a magnetron sputtering method. We control the temperature to form the nanocomposite by using their different nucleation temperature during the sulfonation process. A nanostructured PbS/Sb2O5with cross-linked morphology was synthesized by using this fast and efficient method. This method has also been used to grow a uniform thin film of nanocomposite. The photo-sensing and gas-sensing properties related to the PbS/Sb2O5compared with those of other nanomaterials have also been investigated. The experimental and theoretical calculations reveal that the PbS/Sb2O5exhibits extraordinarily superior photo-sensing and gas-sensing properties in terms of providing a pathway for electron transport to the electrode. The attractive highly sensitive photo and gas sensing properties of PbS/Sb2O5make them applicable for many different kinds of applications. The responsivity and detectivity of PbS/Sb2O5are 0.28 S/mWcm-2and 1.68 × 1011Jones respectively. The sensor response towards NO2gas was found to be 0.98 at 10 ppb with an limit of detection (LOD) of 0.083 ppb. The PbS/Sb2O5exhibits high selectivity towards the NO2gas. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) were used to analyze the geometries, electronic structure, and electronic absorption spectra of a light sensor fabricated by PbS/Sb2O5. The results are very analogous to the experimental results. Both photosensors and gas sensors are indispensable tools that contribute significantly to the evolution of technology and the improvement of various aspects of modern life.

Highly Efficient Room Temperature NO2 Sensor Using Two-Phase TiOx Heterogeneous Nanoparticles.

In this study, we successfully synthesized two-phase titanium oxide (TiOx) heterogeneous nanoparticles (NPs) using an advanced sol-gel method, a significant stride in developing efficient, room temperature (RT) NO2 gas sensors. The prepared two-phase TiOx heterogeneous NPs exhibited exceptional sensitivity to low concentrations of NO2 gas at RT. The heightened gas response was attributed to a significant presence of oxygen vacancies, creating intermediate states within the two-phase heterostructures and thus narrowing the band gap. This facilitated electron transport from the valence band (VB) to the conduction band (CB), resulting in increased current at RT. The XPS analysis confirmed a substantial amount of chemisorbed oxygen O2(ads)- within the two-phase heterostructures, providing more chemisorption sites for nitrogen dioxide gas. This increase in chemisorption sites significantly improved the gas response. Furthermore, the introduction of zinc into the TiOx NPs reduced their band gap, enhancing the background resistance signal-to-noise ratio and increasing the response while maintaining remarkable stability. In summary, our work introduces a promising RT NO2 sensor based on two-phase TiOx heterogeneous NPs, holding great potential for applications in environmental monitoring and gas sensing technology. In future work, we aim to delve deeper into the capabilities of the sensor, exploring broader applications and refining its design for enhanced practicality in environmental monitoring.

Improving Sensitivity and Reproducibility of Surface-Enhanced Raman Scattering Biochips Utilizing Magnetoplasmonic Nanoparticles and Statistical Methods.

Surface-enhanced Raman scattering (SERS) technology has been widely recognized for its remarkable sensitivity in biochip development. This study presents a novel sandwich immunoassay that synergizes SERS with magnetoplasmonic nanoparticles (MPNs) to improve sensitivity. By taking advantage of the unique magnetism of these nanoparticles, we further enhance the detection sensitivity of SERS biochips through the applied magnetic field. Despite the high sensitivity, practical applications of SERS biochips are often limited by the issues of stability and reproducibility. In this study, we introduced a straightforward statistical method known as "Gaussian binning", which involves initially binning the two-dimensional Raman mapping data and subsequently applying Gaussian fitting. This approach enables a more consistent and reliable interpretation of data by reducing the variability inherent in Raman signal measurements. Based on our method, the biochip, targeting for C-reactive protein (CRP), achieves an impressive detection limit of 5.96 fg/mL, and with the application of a 3700 G magnetic field, it further enhances the detection limit by 5.7 times, reaching 1.05 fg/mL. Furthermore, this highly sensitive and magnetically tunable SERS biochip is easily designed for versatile adaptability, enabling the detection of other proteins. We believe that this innovation holds promise in enhancing the clinical applicability of SERS biochips.

A simple and fast method for the fabrication of p-typeß-Ga2O3by electrochemical oxidation method with DFT interpretation.

In this work, a simple electrochemical oxidation method has been used to prepare p-typeß-Ga2O3nanoparticles. This method overcomes the problem of doping high energy gap semiconductors to form p-type. The electron holes ofß-Ga2O3were caused by oxygen vacancy (Vo) and showed the shorter lattice constant and preferred orientation in XRD analysis. The peak area of oxygen vacancy also reflects a higher ratio than n-type Ga2O3in x-ray photoelectron spectroscopy (XPS). The adsorption of reducing gas (CO, CH4, and H2) enhanced the resistance of theß-Ga2O3confirming the p-type character of NPs. The DFT calculations showed that oxygen vacancy leads to higher energy of the Fermi level and is near the valence band. The binding energy of Ga2O3and after interaction with gas molecular was also calculated which is analogous to our experimental data.

Sensitivity enhancement of magneto-optical Faraday effect immunoassay method based on biofunctionalized γ-Fe2O3@Au core-shell magneto-plasmonic nanoparticles for the blood detection of Alzheimer's disease.

In this work, we conducted a proof-of-concept experiment based on biofunctionalized magneto-plasmonic nanoparticles (MPNs) and magneto-optical Faraday effect for in vitro Alzheimer's disease (AD) assay. The biofunctionalized γ-Fe2O3@Au MPNs of which the surfaces are modified with the antibody of Tau protein (anti-τ). As anti-τ reacts with Tau protein, biofunctionalized MPNs aggregate to form magnetic clusters which will hence induce the change of the reagent's Faraday rotation angle. The result showed that the γ-Fe2O3@Au core-shell MPNs can enhance the Faraday rotation with respect to the raw γ-Fe2O3 nanoparticles. Because of their magneto-optical enhancement effect, biofunctionalized γ-Fe2O3@Au MPNs effectively improve the detection sensitivity. The detection limit of Tau protein as low as 9 pg/mL (9 ppt) was achieved. Furthermore, the measurements of the clinical samples from AD patients agreed with the CDR evaluated by the neurologist. The results suggest that our method has the potential for disease assay applications.

Revealing a Highly Sensitive Sub-ppb-Level NO2 Gas-Sensing Capability of Novel Architecture 2D/0D MoS2/SnS Heterostructures with DFT Interpretation.

In this work, we use a chemical method to design novel 2D-material/0D-quantum dot (MoS2/SnS) heterostructures. Furthermore, the unique 2D/0D heterostructure enhanced the NO2 gas-sensing capability 3 times and increased the sensing recoverability by more than 90%. Advanced characterization tools such as SEM, TEM, XRD, and AFM confirm the formation of MoS2/SnS heterojunction nanomaterials. Using AFM data, the average thickness of the MoS2 layer was found to be 5 nm. The highest sensor response of 0.33 with good repeatability was observed at 250 ppb of NO2. Sensing characterization reveals the ultra-fast response time, that is, 74 s, at 50 ppb of NO2. The limit of detection for detecting NO2 was also found to be very low, that is, 0.54 ppb, by using MoS2/SnS heterostructures. The theoretical calculations based on density functional theory well corroborated and quantified the intermolecular interaction and gas adsorption on the surface of MoS2/SnS.

Comparative DFT dual gas adsorption model of ZnO and Ag/ZnO with experimental applications as gas detection at ppb level.

By experimental and density functional theory calculations, the toxic gases (O3and NO2) sensing capability and mechanism of ZnO NRs and Ag/ZnO NRs have been comparatively studied in this work. Ag NPs arrays were employed for the growth of ZnO NRs. The experimental results show that when ZnO NRs are grown on Ag NPs, the response and adsorption rate towards the gases change significantly. The TDOS plot shows that the HOMO-LUMO gap changes after interaction with different oxidizing gases, and the peak intensity also decreases confirming the electron are transferred from ZnO to NO2and O3. The response to gases decreases and the adsorption reaction rate increases in Ag/ZnO NRs, as calculated by the Eyring-Polanyi equation, which is very similar to our experimental data. We also find that the absorption coefficient is different for O3and NO2. Finally, experimental response and theoretical results were compared and found to be in good agreement.

Highly sensitive and rapid responding humidity sensors based on silver catalyzed Ag2S-TiO2 quantum dots prepared by SILAR.

We developed a resistive humidity sensor based on a heterojunction of silver sulfide (Ag2S) quantum dots (QDs) and TiO2 because of its specificity to water vapor adsorption and its insensitivity to environmental gases. The QDs were grown on a mesoporous TiO2 layer using the successive ionic layer adsorption and reaction (SILAR) method. The boundary condition between TiO2 and Ag2S provides a tunable energy gap by adjusting the number of SILAR cycles. Besides, the large surface-to-volume ratio of QDs provides a strong water vapor adsorption ability and electron transfer. Nano-silver precipitated during the SILAR process provides free electrons and lowers the Fermi level to between n-type TiO2 and p-type Ag2S. The resistance response increased significantly to 4600 and the reaction equilibrium time decreased greatly to 7 seconds due to the presence of nano-silver. Finally, the Ag2S QDs possess a best sensing range of 13-90%. To sum up, Ag2S QDs are high sensitivity and selectivity humidity sensors.

The Response of UV/Blue Light and Ozone Sensing Using Ag-TiO2 Planar Nanocomposite Thin Film.

We successfully fabricated a planar nanocomposite film that uses a composite of silver nanoparticles and titanium dioxide film (Ag-TiO2) for ultraviolet (UV) and blue light detection and application in ozone gas sensor. Ultraviolet-visible spectra revealed that silver nanoparticles have a strong surface plasmon resonance (SPR) effect. A strong redshift of the plasmonic peak when the silver nanoparticles covered the TiO2 thin film was observed. The value of conductivity change for the Ag-TiO2 composite is 4-8 times greater than that of TiO2 film under UV and blue light irradiation. The Ag-TiO2 nanocomposite film successfully sensed 100 ppb ozone. The gas response of the composite film increased by roughly six and four times under UV and blue light irradiation, respectively. We demonstrated that a Ag-TiO2 composite gas sensor can be used with visible light (blue). The planar composite significantly enhances photo catalysis. The composite films have practical application potential for wearable devices.

Magneto-Optical Characteristics of Streptavidin-Coated Fe3O4@Au Core-Shell Nanoparticles for Potential Applications on Biomedical Assays.

Recently, gold-coated magnetic nanoparticles have drawn the interest of researchers due to their unique magneto-plasmonic characteristics. Previous research has found that the magneto-optical Faraday effect of gold-coated magnetic nanoparticles can be effectively enhanced because of the surface plasmon resonance of the gold shell. Furthermore, gold-coated magnetic nanoparticles are ideal for biomedical applications because of their high stability and biocompatibility. In this work, we synthesized Fe3O4@Au core-shell nanoparticles and coated streptavidin (STA) on the surface. Streptavidin is a protein which can selectively bind to biotin with a strong affinity. STA is widely used in biotechnology research including enzyme-linked immunosorbent assay (ELISA), time-resolved immunofluorescence (TRFIA), biosensors, and targeted pharmaceuticals. The Faraday magneto-optical characteristics of the biofunctionalized Fe3O4@Au nanoparticles were measured and studied. We showed that the streptavidin-coated Fe3O4@Au nanoparticles still possessed the enhanced magneto-optical Faraday effect. As a result, the possibility of using biofunctionalized Fe3O4@Au nanoparticles for magneto-optical biomedical assays should be explored.

Improving the SERS signals of biomolecules using a stacked biochip containing Fe2O3/Au nanoparticles and a DC magnetic field.

This study proposes a magnetic biochip that uses surface-enhanced Raman scattering (SERS) for antigen detection. The biochip was a sandwich structure containing alternating layers of gold and magnetic Fe2O3 nanoparticles. Both single (Au/Fe2O3/Au) and multilayer (Au/Fe2O3/Au/Fe2O3/Au) chips containing Fe2O3 nanoparticles were fabricated to detect bovine serum albumin (BSA). The single-layer chip detected the BSA antigen at a signal-to-noise ratio (SNR) of 5.0. Peaks detected between 1000 and 1500 cm-1 corresponded to various carbon chains. With more Fe2O3 layers, bond resonance was enhanced via the Hall effect. The distribution of electromagnetic field enhancement was determined via SERS. The signal from the single-layer chip containing Au nanoparticles was measured in an external magnetic field. Maximum signal strength was recorded in a field strength of 12.5 gauss. We observed peaks due to other carbon-hydrogen molecules in a 62.5-gauss field. The magnetic field could improve the resolution and selectivity of sample observations.

Analysis of the Sensing Properties of a Highly Stable and Reproducible Ozone Gas Sensor Based on Amorphous In-Ga-Zn-O Thin Film.

In this study, the sensing properties of an amorphous indium gallium zinc oxide (a-IGZO) thin film at ozone concentrations from 500 to 5 ppm were investigated. The a-IGZO thin film showed very good reproducibility and stability over three test cycles. The ozone concentration of 60-70 ppb also showed a good response. The resistance change (ΔR) and sensitivity (S) were linearly dependent on the ozone concentration. The response time (T90-res), recovery time (T90-rec), and time constant (τ) showed first-order exponential decay with increasing ozone concentration. The resistance-time curve shows that the maximum resistance change rate (dRg/dt) is proportional to the ozone concentration during the adsorption. The results also show that it is better to sense rapidly and stably at a low ozone concentration using a high light intensity. The ozone concentration can be derived from the resistance change, sensitivity, response time, time constant (τ), and first derivative function of resistance. However, the time of the first derivative function of resistance is shorter than other parameters. The results show that a-IGZO thin films and the first-order differentiation method are promising candidates for use as ozone sensors for practical applications.

Influence of magnetoplasmonic γ-Fe2O3/Au core/shell nanoparticles on low-field nuclear magnetic resonance.

Magnetoplasmonic nanoparticles, composed of a plasmonic layer and a magnetic core, have been widely shown as promising contrast agents for magnetic resonance imaging (MRI) applications. However, their application in low-field nuclear magnetic resonance (LFNMR) research remains scarce. Here we synthesised γ-Fe2O3/Au core/shell (γ-Fe2O3@Au) nanoparticles and subsequently used them in a homemade, high-Tc, superconducting quantum interference device (SQUID) LFNMR system. Remarkably, we found that both the proton spin-lattice relaxation time (T1) and proton spin-spin relaxation time (T2) were influenced by the presence of γ-Fe2O3@Au nanoparticles. Unlike the spin-spin relaxation rate (1/T2), the spin-lattice relaxation rate (1/T1) was found to be further enhanced upon exposing the γ-Fe2O3@Au nanoparticles to 532 nm light during NMR measurements. We showed that the photothermal effect of the plasmonic gold layer after absorbing light energy was responsible for the observed change in T1. This result reveals a promising method to actively control the contrast of T1 and T2 in low-field (LF) MRI applications.