Decay and Termite Resistance of Wood Modified by High-Temperature Vapour-Phase Acetylation (HTVPA), a Simultaneous Acetylation and Heat Treatment Modification Process.

High-temperature vapour-phase acetylation (HTVPA) is a simultaneous acetylation and heat treatment process for wood modification. This study was the first investigation into the impact of HTVPA treatment on the resistance of wood to biological degradation. In the termite resistance test, untreated wood exhibited a mass loss (MLt) of 20.3%, while HTVPA-modified wood showed a reduced MLt of 6.6-3.2%, which decreased with an increase in weight percent gain (WPG), and the termite mortality reached 95-100%. Furthermore, after a 12-week decay resistance test against brown-rot fungi (Laetiporus sulfureus and Fomitopsis pinicola), untreated wood exhibited mass loss (MLd) values of 39.6% and 54.5%, respectively, while HTVPA-modified wood exhibited MLd values of 0.2-0.9% and -0.2-0.3%, respectively, with no significant influence from WPG. Similar results were observed in decay resistance tests against white-rot fungi (Lenzites betulina and Trametes versicolor). The results of this study demonstrated that HTVPA treatment not only effectively enhanced the decay resistance of wood but also offered superior enhancement relative to separate heat treatment or acetylation processes. In addition, all the HTVPA-modified wood specimens prepared in this study met the requirements of the CNS 6717 wood preservative standard, with an MLd of less than 3% for decay-resistant materials.

Nutraceutical Potential of Djulis (Chenopodium formosanum) Hull: Phytochemicals, Antioxidant Activity, and Liver Protection.

Djulis (Chenopodium formosanum), a traditional Taiwanese crop enriched with phenolic compounds and betalain pigments, is associated with various health benefits, including antioxidant and hepatoprotective effects. This study analysed the phytochemical content and antioxidant capacity of extracts from both the hull and kernel of Djulis. The hull extract, which contained higher levels of flavonoids and exhibited superior antioxidant activity compared to the kernel extract, was selected for further in vivo studies. These experiments showed that oral administration of the Djulis hull crude extract significantly mitigated lipopolysaccharide (LPS)-induced acute liver injury (ALI) in mice by increasing the activity of the antioxidant enzyme glutathione peroxidase (GPx), reducing plasma levels of pro-inflammatory cytokine interferon gamma (IFN-γ), and enhancing liver levels of the anti-inflammatory cytokine interleukin-4 (IL-4). Additionally, the extract demonstrated potential in inhibiting the TLR4/NF-κB pathway, a critical signalling pathway in inflammation and apoptosis, offering insights into its protective mechanisms. These findings underscore Djulis hull's potential as a functional food ingredient for ALI prevention and propose a valuable application for agricultural by-products.

Anti-Inflammatory Effects of Anthocyanin-Enriched Black Soybean Seed Coat (BSSC) Crude Extract on LPS-Induced Acute Liver Injury in Mice.

Soybeans rank among the top five globally produced crops. Black soybeans contain anthocyanins in their seed coat, offering strong antioxidant and anti-inflammatory benefits. This study explores the protective effects of black soybean seed coat (BSSC) against acute liver injury (ALI) in mice. Mice pretreated with BSSC crude extract showed reduced liver damage, inflammation, and apoptosis. High doses (300 mg/kg) of the extract decreased levels of proinflammatory cytokines (IL-6, IFN-γ) and increased levels of anti-inflammatory ones (IL-4, IL-10), alongside mitigating liver pathological damage. Additionally, it influenced the Nrf2/HO-1 pathway and reduced levels of apoptosis-related proteins. In vitro, the compounds delphinidin-3-O-glucoside (D3G) and cyanidin-3-O-glucoside (C3G) in BSSC were found to modulate cytokine levels, suggesting their role in ALI protection. The study concludes that BSSC extract, particularly due to D3G and C3G, effectively protects against LPS-induced ALI in mice by inhibiting inflammation, oxidative stress, and apoptosis.

Assessing the Long-Term Creep Behaviour of Hydrothermally Treated Japanese Cedar Wood Using the Short-Term Accelerated Stepped Isostress Method.

In this study, short-term accelerated creep tests were conducted using the stepped isostress method (SSM) to investigate the impact of hydrothermal treatment on the long-term creep behaviour of Japanese cedar wood and to determine optimal hydrothermal treatment conditions. The results showed that SSM can effectively predict the creep behaviour of hydrothermally treated wood. Among the treatment conditions tested, Japanese cedar wood treated hydrothermally at 180 °C for 4 h exhibited higher flexural strength retention (91%) and moisture excluding efficiency (MEE) (44%) and demonstrated superior creep resistance compared to untreated wood. When subjected to a 30% average breaking load (ABL) over 20 years, the specimen's creep compliance, instantaneous creep compliance, b value, activation volume, and improvement in creep resistance (ICR) were 0.17 GPa-1, 0.139 GPa-1, 0.15, 1.619 nm3, and 4%, respectively. The results indicate that subjecting Japanese cedar wood to hydrothermal treatment at 180 °C for 4 h has a negligible effect on its flexural properties but results in significant improvements in both dimensional stability and creep resistance.

Antrodia salmonea Extracts Regulate p53-AR Signaling and Apoptosis in Human Prostate Cancer LNCaP Cells.

Antrodia salmonea (AS) is a genus of Antrodia, an epiphyte of Cunninghamia konishii in Taiwan. AS has been reported to have potential therapeutic effects on different diseases, including diarrhea, abdominal pain, and hypertension. AS has been reported to have anticancer effects on numerous cancer types, such as ovarian carcinoma and triple-negative breast cancer. Our previous studies demonstrated that antrocins and triterpenoids are possibly bioactive compositions. However, the effects of AS on prostate cancer remain unknown. Therefore, we investigated the role of AS in prostate cancer growth, apoptosis, and cell cycle regulation. The results showed that AS extracts significantly inhibited the proliferation of prostate cancer LNCaP cells in a dose-dependent manner and increased the levels of apoptotic markers (cleaved PARP and cleaved caspase 3/8/9). In addition, the cell cycle-related proteins CDK1, CDK2, CDK4, and their respective specific regulators Cyclin B1, Cyclin A, and Cyclin D were also affected. Besides, AS treatment increased p53 protein levels and slowed its degradation in LNCaP cells. Interestingly, we found that AS treatment reduced both total protein and Ser-81 phosphorylation levels of the androgen receptor (AR). Notably, the increase of nuclear p53 was accompanied by the down-regulation of AR, suggesting a reverse regulation between p53 and AR in LNCaP cells was triggered by AS treatment. These findings suggest that AS extracts trigger the apoptosis of prostate cancer cells through the reverse regulation of p53 and AR and elucidate that AS extracts might be a potential treatment for androgen-dependent prostate cancer in the near future.

Characterization and Prediction of Physical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment.

This study used the luanta fir (Cunninghamia konishii Hayata) wood, one of the most used wood construction and building materials in Taiwan, as specimens to examine the impact of different conditions of vacuum hydrothermal (VH) treatment on the physical properties of this wood. A prediction model for these properties was created using a nondestructive spectroscopy technique. The test results revealed that the mass loss, moisture exclusion efficiency, anti-swelling efficiency, color difference, and surface contact angle of the VH-treated wood all increased under increasing heat treatment temperature and time. Moreover, the use of near-infrared (NIR) spectroscopy in creating the prediction model for the physical properties of the VH-treated luanta fir wood revealed that the ratios of performance to deviation (RPD) for mass loss, equilibrium moisture content, and color difference were all above 2.5, indicating a high prediction accuracy. These results suggested that an NIR spectrometer can serve as a useful instrument for the accurate prediction of the physical properties or for controlling the quality of VH-treated wood.

Antrodia salmonea extract inhibits cell proliferation through regulating cell cycle arrest and apoptosis in prostate cancer cell lines.

Antrodia salmonea (AS) is a fungus, which belongs to a fungal family of Taiwanofungus salmoneus with the features of anti-oxidant, anti-inflammatory, and anticancer. Recent studies have shown that AS has anti-cancer functions in ovarian and breast cancer. However, the effects of AS on prostate cancer (PCa) proliferation remain unknown. Therefore, we investigated the role of AS in PCa proliferation through apoptosis, and cell cycle regulation in PCa cell lines. Our results showed that Antrodia salmonea extract (ASE) inhibited PCa cells growth with a dose-dependent manner. In addition, ASE decreased the anchorage-independent growth formation ability in PC3 cells. Moreover, ASE-induced cell growth inhibition in PCa cells (DU145, PC3) was correlated to decreased cell cycle-related proteins such as cyclin A/B and cyclin-dependent kinase CDK1/2/4, and increased cell cycle inhibitor proteins p21. Besides, ASE decreased the total protein level of epidermal growth factor receptor and its downstream signaling pathways Akt and Erk in both PCa cells. We found that apoptotic markers such as cleaved-PARP protein levels increased significantly in DU145 cells indicating ASE might induce apoptosis. In conclusion, our results suggest that ASE may have the ability to induce PCa cell death through regulating cell cycle arrest and apoptosis pathways.

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment.

Since the chemical composition of wood is closely related to its mechanical properties, chemical analysis techniques such as near-infrared (NIR) spectroscopy provide a reasonable non-destructive method for predicting wood strength. In this study, we used NIR spectra with principal component analysis (PCA) to reveal that vacuum hydrothermal (VH) treatment causes degradation of hemicellulose as well as the amorphous region of cellulose, resulting in lower hydroxyl and acetyl group content. These processes increase the crystallinity of the luanta fir wood (Cunninghamia konishii Hayata), which, in turn, effectively increases its compressive strength (σc,max), hardness, and modulus of elasticity (MOE). The PCA results also revealed that the primary factors affecting these properties are the hemicellulose content, hydroxyl groups in the cellulose amorphous region, the wood moisture content, and the relative lignin content. Moreover, the ratios of performance deviation (RPDs) for the σc,max, shear strength (σs,max), hardness, and modulus of rupture (MOR) models were 1.49, 1.24, 1.13, and 2.39, indicating that these models can be used for wood grading (1.0 < RPD < 2.5). Accordingly, NIR can serve as a useful tool for predicting the mechanical properties of VH-treated wood.

Anti-NAFLD Effect of Djulis Hull and Its Major Compound, Rutin, in Mice with High-Fat Diet (HFD)-Induced Obesity.

Nonalcoholic fatty liver disease (NAFLD) has become the main cause of chronic liver disease worldwide, and the increasing trend of NAFLD has burdened the healthcare system. NAFLD encompasses a wide range of liver pathologies, from simple benign hepatocyte steatosis to more severe inflammatory nonalcoholic steatohepatitis. Djulis (Chenopodium formosanum Koidz.) is traditionally used as a native cereal and a food supplement that promotes human health through its antioxidant, hepatoprotection, skin protection, hypolipidemic, hypoglycemic, and antitumor effects. Djulis hull, regarded as agricultural waste, is usually removed during food processing and contains high rutin content. The present study evaluated the anti-NAFLD effect of Djulis hull and its major compound, rutin, in mice with high-fat diet (HFD)-induced obesity. Male C57BL/6J mice were randomly divided into one of five diet groups (n = 6 per group) and fed the following for 16 weeks: (1) normal diet group (ND), (2) HFD group (HFD), (3) HFD and oral gavage of low dose (50 mg/kg) of Djulis hull crude extract group (HFD/LCE), (4) HFD and oral gavage of high dose (250 mg/kg) of Djulis hull crude extract group (HFD/HCE), or (5) HFD and oral gavage (50 mg/kg) of rutin (HFD/R) group. We found that Djulis hull crude extract markedly reduced HFD-induced elevation in body weight and fat around the kidney weights, hepatic injury indicators (AST and ALT), and steatosis and hypertrophy. Furthermore, Djulis hull crude extract administration significantly affected DG(20:4/18:1), PA(22:0/17:1), PC(10:0/17:0), and PA(18:4/20:5) in HFD-induced obese mice. In addition, treating HFD-induced obese rats with Djulis hull crude extract significantly increased fatty acid oxidation by increasing the protein expression of phosphorylated AMP-activated protein kinase, peroxisome proliferator-activated receptor-α, and hepatic carnitine palmitoyltransferase-1 in the liver. Moreover, the administration of Djulis hull crude extract significantly decreased the inflammatory response (PPARγ, IL-6, and TNF-α) to modulate oxidative damage. Therefore, Djulis hull crude extract attenuated the progression of NAFLD by reducing inflammation mediated by PPARγ and enhancing the expression levels of genes involved in fatty acid oxidation mediated by AMPK signaling.

Comparison of the Physico-Mechanical and Weathering Properties of Wood-Plastic Composites Made of Wood Fibers from Discarded Parts of Pomelo Trees and Polypropylene.

The purpose of this study is to compare the characteristics of wood-plastic composites (WPCs) made of polypropylene (PP) and wood fibers (WFs) from discarded stems, branches, and roots of pomelo trees. The results show that the WPCs made of 30-60 mesh WFs from stems have better physical, flexural, and tensile properties than other WPCs. However, the flexural strengths of all WPCs are not only comparable to those of commercial wood-PP composites but also meet the strength requirements of the Chinese National Standard for exterior WPCs. In addition, the color change of WPCs that contained branch WFs was lower than that of WPCs that contained stem or root WFs during the initial stage of the accelerated weathering test, but the surface color parameters of all WPCs were very similar after 500 h of xenon arc accelerated weathering. Scanning electron microscope (SEM) micrographs showed many cracks on the surfaces of WPCs after accelerated weathering for 500 h, but their flexural modulus of rupture (MOR) and modulus of elasticity (MOE) values did not differ significantly during weathering. Thus, all the discarded parts of pomelo trees can be used to manufacture WPCs, and there were no significant differences in their weathering properties during 500 h of xenon arc accelerated weathering.

The Artificial Intelligence of Things Sensing System of Real-Time Bridge Scour Monitoring for Early Warning during Floods.

Scour around bridge piers remains the leading cause of bridge failure induced in flood. Floods and torrential rains erode riverbeds and damage cross-river structures, causing bridge collapse and a severe threat to property and life. Reductions in bridge-safety capacity need to be monitored during flood periods to protect the traveling public. In the present study, a scour monitoring system designed with vibration-based arrayed sensors consisting of a combination of Internet of Things (IoT) and artificial intelligence (AI) is developed and implemented to obtain real-time scour depth measurements. These vibration-based micro-electro-mechanical systems (MEMS) sensors are packaged in a waterproof stainless steel ball within a rebar cage to resist a harsh environment in floods. The floodwater-level changes around the bridge pier are performed using real-time CCTV images by the Mask R-CNN deep learning model. The scour-depth evolution is simulated using the hydrodynamic model with the selected local scour formulas and the sediment transport equation. The laboratory and field measurement results demonstrated the success of the early warning system for monitoring the real-time bridge scour-depth evolution.

Proteomics Reveals Octyl Gallate as an Environmentally Friendly Wood Preservative Leading to Reactive Oxygen Species-Driven Metabolic Inflexibility and Growth Inhibition in White-Rot Fungi (Lenzites betulina and Trametes versicolor).

The most commonly applied wood preservatives are based on creosote, pentachlorophenol, and waterborne chromate copper arsenate, which negatively affect the environment. Thus, environmentally friendly wood preservatives are required. This study investigated the antifungal activity and mechanism of several long-chain alkyl gallates (3,4,5-trihydroxybenzoates) against white-rot fungi, Lenzites betulina and Trametes versicolor. The results revealed that octyl gallate (OG) had the best antifungal activity. Additionally, OG may have a mechanism of action similar to surfactants and inhibit ATPase activity, causing mitochondrial dysfunction and endogenous reactive oxygen species (ROS) production. Upon exposure to endogenous ROS, cells rapidly inhibit the synthesis of 60S ribosomal subunits, thus reducing the mycelial growth rate. L. betulina and T. versicolor also remodeled their energy metabolism in response to low ATP levels and endogenous ROS. After OG treatment, ATP citrate synthase activity was downregulated and glycolytic activity was upregulated in L. betulina. However, the activity of aerobic pathways was decreased and the oxidative branch of the pentose phosphate pathway was redirected form nicotinamide adenine dinucleotide phosphate (NADPH) to minimize endogenous ROS-mediated damage in T. versicolor. Taken together, these observations reveal that OG is a potent inhibitor of white-rot fungus. Further structural optimization research and pharmacological investigations are warranted.

Djulis Hull Improves Insulin Resistance and Modulates the Gut Microbiota in High-Fat Diet (HFD)-Induced Hyperglycaemia.

In this study, we annotated the major flavonoid glycoside, rutin, of djulis hull crude extract using a Global Natural Products Social Molecular Networking (GNPS) library and its MS/MS spectra. To evaluate the protective effect of djulis hull crude extract and rutin on glucose tolerance, we fed mice a high-fat diet (HFD) for 16 weeks to induce hyperglycaemia. These results showed that crude extract significantly decreased HFD-induced elevation in the area under the curve (AUC) of weekly random blood glucose and oral glucose tolerance tests (OGTT), homeostasis model assessment (HOMA-IR), and advanced glycation end product (AGE) levels, and significantly increased pIRS1 and Glut4 protein expression in epididymal white adipose tissue (eWAT) and liver. Furthermore, the HFD-induced reduction in the activity of glutathione peroxidase (GPx) and catalase (CAT) was reversed by crude extract. In addition, ZO-1 and occludin protein expression in the colon was markedly downregulated in HFD-fed mice, resulting in decreased intestinal permeability and lipopolysaccharide (LPS) translocation, but were restored following crude extract. Moreover, the crude extract intervention had a profound effect on the alpha diversity and microbial community in the gut microbiota. Therefore, djulis hull crude extract could improve blood glucose and increase insulin receptor sensitivity in HFD-induced hyperglycaemia, which is likely due to its modulation of the gut microbiota, preservation of the integrity of the intestinal barrier to reduce body inflammation, increased antioxidant activity, and modulation of insulin signalling.

Effects of Acetylated Veneer on the Natural Weathering Properties of Adhesive-Free Veneer Overlaid Wood‒Plastic Composites.

The purpose of this study is to investigate the natural weathering properties of unmodified and acetylated veneer overlaid wood‒plastic composites (vWPCs) manufactured by one-step hot press molding. The results show that the water absorption and thickness swelling of vWPC with acetylated veneer were lower than those of unmodified vWPC. In addition, the surface tensile strength of vWPC increased with increasing weight gain of acetylated veneer, and the flexural properties of vWPC were not significantly different. Furthermore, the results of natural weathering demonstrated that not only the photostability but also the modulus of elasticity (MOE) retention ratio and surface tensile strength of vWPC with acetylated veneer were significantly higher than those of vWPC with unmodified veneer. Thus, better dimensional stability, surface tensile strength, and weathering properties can be achieved when the vWPC is made with acetylated veneer, especially those containing veneers with a higher weight percent gain.

Molecular Mechanisms Underlying Yatein-Induced Cell-Cycle Arrest and Microtubule Destabilization in Human Lung Adenocarcinoma Cells.

Yatein is an antitumor agent isolated from Calocedrus formosana Florin leaves extract. In our previous study, we found that yatein inhibited the growth of human lung adenocarcinoma A549 and CL1-5 cells by inducing intrinsic and extrinsic apoptotic pathways. To further uncover the effects and mechanisms of yatein-induced inhibition on A549 and CL1-5 cell growth, we evaluated yatein-mediated antitumor activity in vivo and the regulatory effects of yatein on cell-cycle progression and microtubule dynamics. Flow cytometry and western blotting revealed that yatein induces G2/M arrest in A549 and CL1-5 cells. Yatein also destabilized microtubules and interfered with microtubule dynamics in the two cell lines. Furthermore, we evaluated the antitumor activity of yatein in vivo using a xenograft mouse model and found that yatein treatment altered cyclin B/Cdc2 complex expression and significantly inhibited tumor growth. Taken together, our results suggested that yatein effectively inhibited the growth of A549 and CL1-5 cells possibly by disrupting cell-cycle progression and microtubule dynamics.

Preparation of Biomorphic Porous SiC Ceramics from Bamboo by Combining Sol-Gel Impregnation and Carbothermal Reduction.

This study investigated the feasibility of using bamboo to prepare biomorphic porous silicon carbide (bio-SiC) ceramics through a combination of sol-gel impregnation and carbothermal reduction. The effects of sintering temperature, sintering duration, and sol-gel impregnation cycles on the crystalline phases and microstructure of bio-SiC were investigated. X-ray diffraction patterns revealed that when bamboo charcoal-SiO2 composites (BcSiCs) were sintered at 1700 °C for more than 2 h, the resulting bio-SiC ceramics exhibited significant ß-SiC diffraction peaks. In addition, when the composites were sintered at 1700 °C for 2 h, scanning electron microscopy micrographs of the resulting bio-SiC ceramic prepared using a single impregnation cycle showed the presence of SiC crystalline particles and nanowires in the cell wall and cell lumen of the carbon template, respectively. However, bio-SiC prepared using three and five repeated cycles of sol-gel impregnation exhibited a foam-like microstructure compared with that prepared using a single impregnation cycle. Moreover, high-resolution transmission electron microscopy and selected area electron diffraction revealed that the atomic plane of the nanowire of bio-SiC prepared from BcSiCs had a planar distance of 0.25 nm and was perpendicular to the (111) growth direction. Similar results were observed for the bio-SiC ceramics prepared from bamboo-SiO2 composites (BSiCs). Accordingly, bio-SiC ceramics can be directly and successfully prepared from BSiCs, simplifying the manufacturing process of SiC ceramics.

Long-Term Creep Behavior Prediction of Sol-Gel Derived SiO2- and TiO2-Wood Composites Using the Stepped Isostress Method.

In this study, methyltrimethoxysilane (MTMOS), methyltriethoxysilane (MTEOS), tetraethoxysilane (TEOS), and titanium(IV) isopropoxide (TTIP) were used as precursor sols to prepare wood-inorganic composites (WICs) by a sol-gel process, and subsequently, the long-term creep behavior of these composites was estimated by application of the stepped isostress method (SSM). The results revealed that the flexural modulus of wood and WICs were in the range of 9.8-10.5 GPa, and there were no significant differences among them. However, the flexural strength of the WICs (93-103 MPa) was stronger than that of wood (86 MPa). Additionally, based on the SSM processes, smooth master curves were obtained from different SSM testing parameters, and they fit well with the experimental data. These results demonstrated that the SSM was a useful approach to evaluate the long-term creep behavior of wood and WICs. According to the Eyring equation, the activation volume of the WICs prepared from MTMOS (0.825 nm3) and TEOS (0.657 nm3) was less than that of the untreated wood (0.832 nm3). Furthermore, the WICs exhibited better performance on the creep resistance than that of wood, except for the WICMTEOS. The reduction of time-dependent modulus for the WIC prepared from MTMOS was 26% at 50 years, which is the least among all WICs tested. These findings clearly indicate that treatment with suitable metal alkoxides could improve the creep resistance of wood.

Antifatigue Activity and Exercise Performance of Phenolic-Rich Extracts from Calendula officinalis, Ribes nigrum, and Vaccinium myrtillus.

Calendula officinalis, Ribes nigrum, and Vaccinium myrtillus (CRV) possess a high phenolic compound content with excellent antioxidant activity. Dietary antioxidants can reduce exercise-induced oxidative stress. Consumption of large amounts of phenolic compounds is positively correlated with reduction in exercise-induced muscle damage. Research for natural products to improve exercise capacity, relieve fatigue, and accelerate fatigue alleviation is ongoing. Here, CRV containing a large total phenolic content (13.4 mg/g of CRV) demonstrated antioxidant activity. Ultra-performance liquid chromatography quantification revealed 1.95 ± 0.02 mg of salidroside in 1 g of CRV. In the current study, CRV were administered to mice for five weeks, and the antifatigue effect of CRV was evaluated using the forelimb grip strength test; weight-loaded swimming test; and measurement of fatigue-related biochemical indicators, such as blood lactate, ammonia, glucose, blood urea nitrogen (BUN), and creatine kinase (CK) activity; and muscle and liver glycogen content. The results indicated that in CRV-treated mice, the forelimb grip strength significantly increased; weight-loaded swimming time prolonged; their lactate, ammonia, BUN, and CK activity decreased, and muscle and liver glucose and glycogen content increased compared with the vehicle group. Thus, CRV have antifatigue activity and can increase exercise tolerance.

Nonisothermal Crystallization Kinetics of Acetylated Bamboo Fiber-Reinforced Polypropylene Composites.

The crystallization behavior of bamboo fiber (BF) reinforced polypropylene (PP) composites (BPCs) was investigated using a differential scanning calorimeter (DSC). The results showed that unmodified BF as a nucleation agent accelerated the crystallization rate of the PP matrix during cooling whereas there is no significant effect on the improved crystallization rate in BPCs with acetylated BFs. Based on the Avrami method, Avrami-Ozawa method, and Friedman method, the corresponding crystallization kinetics of PP reinforced with different acetylation levels of BFs were further analyzed. The results demonstrated that the crystal growth mechanism of the PP matrix for BPCs with unmodified and various acetylated BFs exhibited tabular crystal growth with heterogeneous nucleation. A higher cooling rate is required to achieve a certain relative crystallinity degree at the unit crystallization time for BPCs with a higher weight percent gain (WPG) of acetylated BFs (WPG >13%). Furthermore, based on the Friedman method, the lowest crystallization activation energy was observed for the BPCs with 19% WPG of acetylated BFs.

Integrate Weather Radar and Monitoring Devices for Urban Flooding Surveillance.

With the increase of extreme weather events, the frequency and severity of urban flood events in the world are increasing drastically. Therefore, this study develops ARMT (automatic combined ground weather radar and CCTV (Closed Circuit Television System) images for real-time flood monitoring), which integrates real-time ground radar echo images and automatically estimates a rainfall hotspot according to the cloud intensity. Furthermore, ARMT combines CCTV image capturing, analysis, and Fourier processing, identification, water level estimation, and data transmission to provide real-time warning information. Furthermore, the hydrograph data can serve as references for relevant disaster prevention, and response personnel may take advantage of them and make judgements based on them. The ARMT was tested through historical data input, which showed its reliability to be between 83% to 92%. In addition, when applied to real-time monitoring and analysis (e.g., typhoon), it had a reliability of 79% to 93%. With the technology providing information about both images and quantified water levels in flood monitoring, decision makers can quickly better understand the on-site situation so as to make an evacuation decision before the flood disaster occurs as well as discuss appropriate mitigation measures after the disaster to reduce the adverse effects that flooding poses on urban areas.