Terahertz polarization and chirality modulation induced by asymmetry inversion combining chiral metasurface and liquid crystal anisotropy.

We experimentally demonstrate a dynamic terahertz (THz) chiral device based on a composite structure of anisotropic liquid crystals (LCs) sandwiched between a bilayer metasurface. The device supports the symmetric mode and antisymmetric mode under the incidence of left- and right-circular polarized waves, respectively. The different coupling strengths of the two modes reflect the chirality of the device, and the anisotropy of the LCs can change the coupling strength of the modes, which brings tunability to the chirality of the device. The experimental results show that the circular dichroism of the device can be dynamically controlled from 28 dB to -32 dB (i.e., inversion regulation) at approximately 0.47 THz and from -32 dB to 1 dB (i.e., switching regulation) at approximately 0.97 THz. Moreover, the polarization state of the output wave is also tunable. Such flexible and dynamic manipulation of THz chirality and polarization might build an alternative pathway for complex THz chirality control, high-sensitivity THz chirality detection, and THz chiral sensing.

Hierarchical-morphology metafabric for scalable passive daytime radiative cooling.

Incorporating passive radiative cooling structures into personal thermal management technologies could effectively defend humans against intensifying global climate change. We show that large-scale woven metafabrics can provide high emissivity (94.5%) in the atmospheric window and high reflectivity (92.4%) in the solar spectrum because of the hierarchical-morphology design of the randomly dispersed scatterers throughout the metafabric. Through scalable industrial textile manufacturing routes, our metafabrics exhibit desirable mechanical strength, waterproofness, and breathability for commercial clothing while maintaining efficient radiative cooling ability. Practical application tests demonstrated that a human body covered by our metafabric could be cooled ~4.8°C lower than one covered by commercial cotton fabric. The cost-effectiveness and high performance of our metafabrics present substantial advantages for intelligent garments, smart textiles, and passive radiative cooling applications.

Highly Stable and Flexible Pressure Sensors with Modified Multi-Walled Carbon Nanotube/Polymer Composites for Human Monitoring.

A facile method for preparing an easy processing, repeatable and flexible pressure sensor was presented via the synthesis of modified multi-walled carbon nanotubes (m-MWNTs) and polyurethane (PU) films. The surface modification of multi-walled carbon nanotubes (MWNTs) simultaneously used a silane coupling agent (KH550) and sodium dodecyl benzene sulfonate (SDBS) to improve the dispersibility and compatibility of the MWNTs in a polymer matrix. The electrical property and piezoresistive behavior of the m-MWNT/PU composites were compared with raw multi-walled carbon nanotube (raw MWNT)/PU composites. Under linear uniaxial pressure, the m-MWNT/PU composite exhibited 4.282%kPa−1 sensitivity within the pressure of 1 kPa. The nonlinear error, hysteresis error and repeatability error of the piezoresistivity of m-MWNT/PU decreased 9%, 16.72% and 54.95% relative to raw MWNT/PU respectively. Therefore, the piezoresistive response of m-MWNT/PU had better stability than that of raw MWNT/PU composites. The m-MWNT/PU sensors could be utilized in wearable devices for body movement detection, monitoring of respiration and pressure detection in garments.

Novel Biological Hydrogel: Swelling Behaviors Study in Salt Solutions with Different Ionic Valence Number.

In this paper, poly γ-glutamic acid/ε-polylysine (γ-PGA/ε-PL) hydrogels were successful prepared. The γ-PGA/ε-PL hydrogels could be used to remove Na⁺, Ca2+, and Cr3+ from aqueous solution and were characterized by scanning electron microscopy. The performance of hydrogels were estimated under different ionic concentration, temperature, and pH. The results showed that the ionic concentration and the pH significantly influenced the swelling capacity of γ-PGA/ε-PL hydrogels. The swelling capacities of γ-PGA/ε-PL hydrogels were decreased with the increase of the ionic concentration. However, the swelling capacity of the γ-PGA/ε-PL hydrogel was increased with the increase of the pH. The swelling kinetics indicated that γ-PGA/ε-PL hydrogels presented a more limited swelling degree in metal ion solutions with higher ionic valence numbers than in ion solutions with lower ionic valence numbers. However, the swelling kinetics of γ-PGA/ε-PL hydrogels showed that they proposed a satisfactory description in NaCl and CaCl2 solutions. The adsorption process was fitted with a pseudo-second-order rate equation model. Moreover, the desorption kinetics of γ-PGA/ε-PL hydrogels showed that they could release most of the adsorption ions. Considering the biocompatibility, biodegradability, and ionic-sensitive properties, we propose that these γ-PGA/ε-PL hydrogels have high potential to be used in environmental protection, medical treatment, and other related fields.