Comparison of crown fit and operator preferences between tooth preparation with electric and air-turbine handpieces.

STATEMENT OF PROBLEM: Tooth preparations for ceramic crowns require precision and accuracy, which may be influenced by the choice of dental handpiece. However, comparisons of the accuracy of tooth preparations made with traditional air-turbine handpieces and electric handpieces are lacking. PURPOSE: The purpose of this in vitro study was to evaluate operator preferences and tooth preparation performance by using electric and air-turbine handpieces with self-reported preferences, sound levels, surface roughness, and the fit of the crown produced. MATERIAL AND METHODS: Twenty dentists were asked to use the air-turbine or the electric handpiece. Feedback on the noise, weight, feel of grip, flexibility, and tooth preparation in general was scored according to a visual analog scale (VAS). Additionally, the dentists were asked to complete a questionnaire on their handpiece preference. The noise of the 2 handpieces was measured by using a precision sound level meter. The surface roughness of 10 teeth was measured by using a profilometer. The other 18 teeth were prepared to measure the marginal and internal fit of ceramic crowns by the replica technique. The VAS scores of operator preferences were analyzed with the Wilcoxon signed ranks test. Decibel levels were analyzed with the Mann-Whitney U test. The McNemar test was used to compare the ratio of preferred handpiece. The surface roughness and marginal and internal fit were analyzed with the independent t test to determine significant differences (all α=.05). RESULTS: The electric handpiece was heavier, had a poorer grip feel, was less flexible (P<.001), produced lower noise and better feeling of the tooth preparation in general (P<.001), and was preferred in the finishing stage for its greater smoothness (P<.05). The noise produced by the electric handpiece was lower during both idling and tooth preparation at 15-cm, 30-cm, and 45-cm distances (P<.01). The electric handpiece produced surface roughness values (Sa) similar to those of the air-turbine handpiece (P>.05). No significant differences were noted for the marginal and internal crown fit between the air-turbine handpiece and electric handpiece groups (P>.05). CONCLUSIONS: Despite its heavier weight, poorer grip feel, and less flexibility, the electric handpiece emitted lower noise, produced better feeling of the tooth preparation in general, and was preferred in the finishing step of tooth preparation for its greater smoothness than the air-turbine handpiece. The surface roughness of the prepared teeth and the crown fit between the tooth and ceramic crown were not affected by the air-turbine or electric handpiece.

[Influence of preparation height and cement space on the fit and retention of computer aided design/computer aided manufacturing zirconia crown].

OBJECTIVE: To investigate the effects of preparation height and cement space on the fit and retention of computer aided design (CAD)/computer aided manufacturing (CAM) zirconia crown, and to provide reference for the clinical design and fabrication of CAD/CAM crowns. METHODS: 3D printing system was used to fabricate resin abutment teeth with convergence angle of 2° and height of 1-3 mm. The models' optical impressions were collected by the three-shape scanner. Then, the cement spaces were set by Cradle CAD/CAM system at 10-50 µm to create an all-ceramic zirconia crown. The fit of the crowns was measured by using silicone rubber interstitial impression method. The retention of the crowns was measured by pull-off test with uniaxial tensile force after the crown was bonded. The data were analyzed by SPSS 22.0 soft-ware. RESULTS: When the preparation height was fixed, the fitness values of different cement space groups have statistical difference (P<0.05), whereas the retention values of different cement space groups have no statistical difference (P>0.05). The fitness values of different preparation height groups have no statistical difference (P>0.05), and the retention values of different preparation height groups have statistical difference (P<0.05) when the cement space was fixed. No interaction was observed between the cement space and the preparation height (P>0.05). CONCLUSIONS: When cradle CAD/CAM system is used to create a full crown in the clinic, the preparation height should be set to more than 3 mm, and the cement space should be set at 30 µm.

Berberine Ameliorates Doxorubicin-Induced Cardiotoxicity via a SIRT1/p66Shc-Mediated Pathway.

Doxorubicin- (DOX-) induced cardiotoxicity is associated with oxidative stress and cardiomyocyte apoptosis. The adaptor protein p66Shc regulates the cellular redox status and determines cell susceptibility to apoptosis. This study is aimed at investigating the involvement of sirtuin 1- (SIRT1-) mediated p66Shc inhibition in DOX-induced redox signalling and exploring the possible protective mechanisms of berberine (Ber) against DOX-triggered cardiac injury in rats and a cultured H9c2 cell line. Our results showed that the Ber pretreatment markedly increased CAT, SOD, and GSH-PX activities, decreased the levels of MDA, and improved the electrocardiogram and histopathological changes in the myocardium in DOX-treated rats (in vivo). Furthermore, Ber significantly ameliorated the DOX-induced oxidative insult and mitochondrial damage by adjusting the levels of intracellular ROS, ΔΨm, and [Ca2+]m in H9c2 cells (in vitro). Importantly, the Ber pretreatment increased SIRT1 expression following DOX exposure but downregulated p66Shc. Consistent with the results demonstrating the SIRT1-mediated inhibition of p66Shc expression, the Ber pretreatment inhibited DOX-triggered cardiomyocyte apoptosis and mitochondrial dysfunction. After exposing H9c2 cells to DOX, the increased SIRT1 expression induced by Ber was abrogated by a SIRT1-specific inhibitor (EX527) or the use of siRNA against SIRT1. Accordingly, SIRT1 inhibition significantly abrogated the suppression of p66Shc expression and protection of Ber against DOX-induced oxidative stress and apoptosis. These results suggest that Ber protects the heart from DOX injury through SIRT1-mediated p66Shc suppression, offering a novel mechanism responsible for the protection of Ber against DOX-induced cardiomyopathy.

Protective effect of berberine on acute cardiomyopathy associated with doxorubicin treatment.

Doxorubicin (DOX) is a potent and broad-spectrum anthracycline chemotherapeutic agent, but dose-dependent cardiotoxic side effects limit its clinical application. This toxicity is closely associated with the generation of reactive oxygen species (ROS) radical during DOX metabolism. The present study investigated the effects of Berberine (Ber) on DOX-induced acute cardiac injury in a rat model and analysed its mechanism in cardiomyocytes in vitro. Serum creatine kinase (CK), creatine kinase isoenzyme (CK-MB) and malondialdehyde (MDA) levels were significantly increased in the DOX group compared with the control group. This increase was accompanied by cardiac histopathological injury and a decrease in cardiomyocyte superoxide dismutase (SOD) and catalase (CAT). CK, CK-MB and MDA levels decreased and SOD and CAT levels increased in the Ber-treated group compared to the DOX group. Ber ameliorated the DOX-induced increase in cytosolic calcium concentration ([Ca2+]i), attenuated mitochondrial Ca2+ overload and restored the DOX-induced loss of mitochondrial membrane potential in vitro. These results demonstrated that Ber exhibited protective effects against DOX-induced heart tissue free radical injury, potentially via the inhibition of intracellular Ca2+ elevation and attenuation of mitochondrial dysfunction.

Controlled formation of uniform nanoshells of manganese oxide and their potential in lithium ion batteries.

Uniform nanoshells of manganese oxides have been successfully prepared by controlling their growth kinetics in solution. The prepared manganese oxides show promising electrochemical performance when used as an anode material in lithium ion batteries.

Controlled formation of uniform CeO2 nanoshells in a buffer solution.

Uniform CeO2 nanoshells were successfully prepared by using buffer solution as a unique growth medium. The application of this methodology to construct a yolk-shell structured Au@CeO2 nanocatalyst shows improved performance for the catalytic CO oxidation.