Recovery, recycling and re-irradiation of enriched 104Ru metal targets for cost effective production of 105Rh.

Rhodium-105 (0.567 MeV ß-, 319 keV γ, 35.4 h half-life) was produced by neutron irradiation of enriched 104Ru (>99%) over multiple decades. A method is reported to recover the previously irradiated 104Ru (trapped in HCl as RuO42-) as the metal. The 104Ru was recovered in >93% yield and >98% enrichment. Neutron re-irradiation of the recycled 104Ru produced 105Rh, which was successfully radiolabeled with tetrathioethers in high yield. This recovery and recycling method for enriched 104Ru makes 105Rh production and utilization economical.

Evaluation of 72Se/72As generator and production of 72Se for supplying 72As as a potential PET imaging radionuclide.

Positron-emitting 72As is the PET imaging counterpart for beta-emitting 77As. Its parent, no carrier added (n.c.a.) 72Se, was produced for a 72Se/72As generator by irradiating an enriched 7°Ge metal-graphite target via the 70Ge(α, 2 n)72Se reaction. Target dissolution used a fast, environmentally friendly method with 93% radioactivity recovery. Chromatographic parameters of the 72Se/72As generator were evaluated, the eluted n.c.a. 72As was characterized with a phantom imaging study, and the previously reported trithiol and aryl-dithiol ligand systems were radiolabeled with the separated n.c.a. 72As in high yield.

Dithiol Aryl Arsenic Compounds as Potential Diagnostic and Therapeutic Radiopharmaceuticals.

Arsenic-72 ((72)As) and (77)As have nuclear properties useful for positron emission tomography (PET) and radiotherapy, respectively. The thiophilic nature of arsenic led to the evaluation of dithioarylarsines for potential use in radiopharmaceuticals. Several dithioarylarsines were synthesized from their arylarsonic acids and dithiols and were fully characterized by NMR, ESI-MS, and X-ray crystallography. This chemistry was translated to the no-carrier-added (nca) (77)As level. Because arsenic was available at the nca nanomolar level only as [(77)As]arsenate, this required addition of an aryl group directly to the As to form the [(77)As]arylarsonic acid. The [(77)As]arsenate was reduced from (77)As (V) to (77)As (III), and a modified Bart reaction was used to incorporate the aryl ring onto the (77)As, which was followed by dithiol addition. Various modifications and optimizations resulted in 95% radiochemical yield of nca [(77)As]p-ethoxyphenyl-1,2-ethanedithiolatoarsine.

Accelerator-based production of the (99m)Tc-(186)Re diagnostic-therapeutic pair using metal disulfide targets (MoS2, WS2, OsS2).

Novel, natural abundance metal disulfide targets were irradiated for 1h with a 10µA proton beam in a small, medical cyclotron. Osmium disulfide was synthesized by simple distillation and precipitation methods while MoS2 and WS2 were commercially available. The targets dissolved under mild conditions and were analyzed by γ-spectroscopy. Production rates and potential applications are discussed, including target recovery and recycling schemes for OsS2 and WS2.

Chromatographic separation of germanium and arsenic for the production of high purity (77)As.

A simple column chromatographic method was developed to isolate (77)As (94±6% (EtOH/HCl); 74±11 (MeOH)) from germanium for potential use in radioimmunotherapy. The separation of arsenic from germanium was based on their relative affinities for different chromatographic materials in aqueous and organic environments. Using an organic or mixed mobile phase, germanium was selectively retained on a silica gel column as germanate, while arsenic was eluted from the column as arsenate. Subsequently, enriched (76)Ge (98±2) was recovered for reuse by elution with aqueous solution (neutral to basic). Greater than 98% radiolabeling yield of a (77)As-trithiol was observed from methanol separated [(77)As]arsenate [17].

Chromatographic separation of selenium and arsenic: A potential (72)Se/(72)As generator.

An anion exchange method was developed to separate selenium and arsenic for potential utility in a (72)Se/(72)As generator. The separation of the daughter (72)As from the (72)Se parent is based on the relative acid-base behavior of the two oxo-anions in their highest oxidation states. At pH 1.5, selenate is retained on strongly basic anion exchange resin as HSeO4(-) and SeO4(2-), while neutral arsenic acid, H3AsO4, is eluted.