Rapid Fabrication of Large-Grain Opal Films and Photonic Crystal Hydrogel Sensors by a Filter Paper-Enhanced Evaporation Chip.

Developing a rapid fabrication method for crack-free opal films is a significant challenge with broad applications. We developed a microfluidic platform known as the "filter paper-enhanced evaporation microfluidic chip" (FPEE-chip) for the fabrication of photonic crystal and inverse opal hydrogel (IOPH) films. The chip featured a thin channel formed by bonding double-sided adhesive poly(ethylene terephthalate) with a polymethyl methacrylate cover and a glass substrate. This channel was then filled with nanosphere colloids. The water was guided to evaporate rapidly at the surface of the filter paper, allowing the nanospheres to self-assemble and accumulate within the channel under capillary forces. Experimental results confirmed that the self-assembly method based on the FPEE-chip was a rapid platform for producing high-quality opal, with centimeter-sized opal films achievable in less than an hour. Furthermore, the filter paper altered the stress release mechanism of the opal films during drying, resulting in fewer cracks. This platform was proven capable of producing large-grain, crack-free opal films of up to 30 mm2 in size. We also fabricated crack-free IOPH pH sensors that exhibited color and size responsiveness to pH changes. The coefficient of variation of the gray color distribution for crack-free IOPH ranged from 0.03 to 0.07, which was lower than that of cracked IOPH (ranging from 0.07 to 0.14). Additionally, the grayscale peak value in 1 mm2 of the crack-free IOPH was more than twice that of the cracked IOPH at the same pH. The FPEE-chip demonstrated potential as a candidate for developing vision sensors.

Capillary Force-Driven Quantitative Plasma Separation Method for Application of Whole Blood Detection Microfluidic Chip.

Separating plasma or serum from blood is essential for precise testing. However, extracting precise plasma quantities outside the laboratory poses challenges. A recent study has introduced a capillary force-driven membrane filtration technique to accurately separate small plasma volumes. This method efficiently isolates 100-200 µL of pure human whole blood with a 48% hematocrit, resulting in 5-30 µL of plasma with less than a 10% margin of error. The entire process is completed within 20 min, offering a simple and cost-effective approach to blood separation. This study has successfully addressed the bottleneck in self-service POCT, ensuring testing accuracy. This innovative method shows promise for clinical diagnostics and point-of-care testing.

A compact microfluidic laser-induced fluorescence immunoassay system using avalanche photodiode for rapid detection of alpha-fetoprotein.

Alpha-fetoprotein (AFP), commonly employed for early diagnosis of liver cancer, serves as a biomarker for cancer screening and diagnosis. Combining the high sensitivity and specificity of fluorescence immunoassay (FIA), developing a low-cost and efficient immunoassay system for AFP detection holds significant importance in disease diagnosis. In this work, we developed a miniaturized oblique laser-induced fluorescence (LIF) immunoassay system, coupled with a microfluidic PMMA/paper hybrid chip, for rapid detection of AFP. The system employed an avalanche photodiode (APD) as the detector, and implemented multi-level filtering in the excitation light channel using the dichroic mirror and optical trap. At first, we employed the Savitzky-Golay filter and baseline off-set elimination methods to denoise and normalize the original data. Then the cutoff frequency of the low-pass filter and the reverse voltage of the APD were optimized to enhance the detection sensitivity of the system. Furthermore, the effect of laser power on the fluorescence excitation efficiency was investigated, and the sampling time during the scanning process was optimized. Finally, a four-parameter logistic (4PL) model was utilized to establish the concentration-response equation for AFP. The system was capable of detecting concentrations of AFP standard solution within the range of 1-500 ng/mL, with a detection limit of 0.8 ng/mL. The entire immunoassay process could be completed within 15 min. It has an excellent potential for applications in low-cost portable diagnostic instruments for the rapid detection of biomarkers.

A simple sealing device based on capillary force.

Sealing is one of the important technologies of a self-driving microfluidic chip. To achieve a better sealing effect, a sealing device based on capillary force is proposed in this paper. The device is composed of a cover plate, a partition plate and a bottom plate; the surface of the microchannel is flat. The liquid is sealed by the capillary force, and is driven by the capillary force to realize spontaneous sealing and driving. The experimental results show that the device can achieve a very good sealing effect when the hydrophilicity is not strong. And because the influence of the sidewall on the flow is reduced, the experimental repeatability is good. The present work has improved the performance of the microchip driven by the capillary force, which will be useful for easy and useful analytical tools using micro-spaces.

The Effects of Laser Parameters and the Ablation Mechanism in Laser Ablation of C/SiC Composite.

The effects of laser parameters and the ablation mechanism in laser ablation of a carbon fiber reinforced silicon carbide (C/SiC) composite are investigated in the present study. Six different power densities are provided, as well as six levels of pulse numbers, and then ablation experiments are conducted for the C/SiC composite, induced by a pulsed laser. Based on the experimental results, the characteristics of surface morphology and ablation behavior are discussed. It is revealed that the surface morphology of the C/SiC composite under laser irradiation usually includes three regions: the center region, the transition region, and the border region. With the increase of laser power density, the ablation of the center region becomes severe, surface cracks occur, and more spherical SiC particles are found in the transition region. As for scenarios involving multiple pulses, the damage occurs in the center region at low power density limits, within the first two layers below the surface. However, if the power density is relatively high, an ablation pit occurs in the center region when the pulse number is larger than 50. Meanwhile, the transition region and the border region diminish with increase of the pulse number. It is noted that both the power density and pulse number have noticeable effects on surface morphology and ablation behavior during laser ablation, which is helpful for material design and performance evaluation of C/SiC composites.