Integrated assessment of the pollution and risk of heavy metals in soils near chemical industry parks along the middle Yangtze River.

Industrialization in riparian areas of critical rivers has caused significant environmental and health impacts. Taking eight industrial parks along the middle Yangtze River as examples, this study proposes a multiple-criteria approach to investigate soil heavy metal pollution and associated ecological and health risks posed by industrial activities. Aiming at seven heavy metals, the results show that nickel (Ni), cadmium (Cd), and copper (Cu) exhibited the most significant accumulation above background levels. The comprehensive findings from Pearson correlation analysis, cluster analysis, principal component analysis, and industrial investigation uncover the primary sources of Cd, arsenic (As), mercury (Hg), and lead (Pb) to be chemical processing, while Ni and chromium (Cr) are predominantly derived from mechanical and electrical equipment manufacturing. In contrast, Cu exhibits a broad range of origins across various industrial processes. Soil heavy metals can cause serious ecological and carcinogenic health risks, of which Cd and Hg contribute to >70 % of the total ecological risk, and As contributes over 80 % of the total health risk. This study highlights the importance of employing multiple mathematical and statistical models in determining and evaluating environmental hazards, and may aid in planning the environmental remediation engineering and optimizing the industry standards.

Review on Rice Husk Biochar as an Adsorbent for Soil and Water Remediation.

Rice husk biochar (RHB) is a low-cost and renewable resource that has been found to be highly effective for the remediation of water and soil environments. Its yield, structure, composition, and physicochemical properties can be modified by changing the parameters of the preparation process, such as the heating rate, pyrolysis temperature, and carrier gas flow rate. Additionally, its specific surface area and functional groups can be modified through physical, chemical, and biological means. Compared to biochar from other feedstocks, RHB performs poorly in solutions with coexisting metal, but can be modified for improved adsorption. In contaminated soils, RHB has been found to be effective in adsorbing heavy metals and organic matter, as well as reducing pollutant availability and enhancing crop growth by regulating soil properties and releasing beneficial elements. However, its effectiveness in complex environments remains uncertain, and further research is needed to fully understand its mechanisms and effectiveness in environmental remediation.

Microbial Removal of Petroleum Hydrocarbons from Contaminated Soil under Arsenic Stress.

The contamination of soils with petroleum and its derivatives is a longstanding, widespread, and worsening environmental issue. However, efforts to remediate petroleum hydrocarbon-polluted soils often neglect or overlook the interference of heavy metals that often co-contaminate these soils and occur in petroleum itself. Here, we identified Acinetobacter baumannii strain JYZ-03 according to its Gram staining, oxidase reaction, biochemical tests, and FAME and 16S rDNA gene sequence analyses and determined that it has the ability to degrade petroleum hydrocarbons. It was isolated from soil contaminated by both heavy metals and petroleum hydrocarbons. Strain JYZ-03 utilized diesel oil, long-chain n-alkanes, branched alkanes, and polycyclic aromatic hydrocarbons (PAHs) as its sole carbon sources. It degraded 93.29% of the diesel oil burden in 7 days. It also had a high tolerance to heavy metal stress caused by arsenic (As). Its petroleum hydrocarbon degradation efficiency remained constant over the 0-300 mg/L As(V) range. Its optimal growth conditions were pH 7.0 and 25-30 °C, respectively, and its growth was not inhibited even by 3.0% (w/v) NaCl. Strain JYZ-03 effectively bioremediates petroleum hydrocarbon-contaminated soil in the presence of As stress. Therefore, strain JYZ-03 may be of high value in petroleum- and heavy-metal-contaminated site bioremediation.

Effect of Pyrolysis Temperature on the Sorption of Cd(II) and Se(IV) by Rice Husk Biochar.

This study investigated the removal of metal cations (Cd(II)) and metalloid anions (Se(IV)) from their aqueous solution by using agricultural waste (rice husk biochar). Rice husk biochar samples were prepared under 300, 500, and 700 °C pyrolysis conditions and their physicochemical properties were characterized. Aqueous Cd(II) and Se(IV) sorption kinetics and isotherms of rice husk biochar were studied. The results showed that the yield of rice husk biochar decreased from 41.6% to 33.3%, the pH increased from 7.5 to 9.9, and the surface area increased from 64.8 m2/g to 330.0 m2/g as the pyrolysis temperature increased from 300 °C to 700 °C. Under the experimental conditions, at increasing preparation temperatures of rice husk biochar, the sorption performance of Cd(II) and Se(IV) was enhanced. The sorption capability and sorption rate were considerably higher and faster for Cd(II) ions than for Se(IV) ions. Cd(II) sorption was found to reach equilibrium faster, within 150 min, while Se(IV) sorption was slower and reached equilibrium within 750 min. The maximum sorption capacities of cadmium and selenium by rice husk biochar were 67.7 mg/g and 0.024 mg/g, respectively, according to Langmuir model fitting.

Higher levels of nonylphenol were found in human urine and drinking water from rural areas as compared to metropolitan regions of Wuhan, China.

The suspected endocrine disruptor nonylphenol (NP) is closely associated with anthropogenic activities; therefore, studies on this compound have been clustered in urban areas. This study investigated the NP concentrations in drinking water sources (n = 8), terminal tap water (n = 36), and human urine samples (n = 127) collected from urban and rural areas in Wuhan, China. The mean concentrations of NP measured in drinking water sources in urban and rural areas were 92.3 ± 7.5 and 11.0 ± 0.8 ng/L (mean ± SD), respectively, whereas the mean levels in urban and rural tap waters were 5.0 ± 0.7 and 44.2 ± 2.6 ng/L (mean ± SD), respectively. Nevertheless, NP was detected in 74.1% and 75.4% of the human urine samples from urban and rural participants, with geometric mean concentrations of 0.19 ng/mL (0.26 µg/g creat) and 0.27 ng/mL (0.46 µg/g creat), respectively. Although the NP concentrations measured in the drinking water sources of urban areas were significantly higher than those in rural areas (P < 0.05), the tap water and urine NP concentrations measured in urban areas were unexpectedly lower than those of rural areas (P < 0.05). Additionally, this investigation showed that the materials comprising household water supply pipelines and drinking water treatment processes in the two areas were also different. Our results indicated that the levels of exposure to NP in drinking water and human urine in rural areas were not necessarily lower than those in urban areas. Thus, particular attention should be paid to rural areas in future studies of NP.

Occurrence and decay of SARS-CoV-2 in community sewage drainage systems.

The rapid spread of the coronavirus disease (COVID-19) pandemic in over 200 countries poses a substantial threat to human health. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which causes COVID-19, can be discharged with feces into the drainage system. However, a comprehensive understanding of the occurrence, presence, and potential transmission of SARS-CoV-2 in sewers, especially in community sewers, is still lacking. This study investigated the virus occurrence by viral nucleic acid testing in vent stacks, septic tanks, and the main sewer outlets of community where confirmed patients had lived during the outbreak of the epidemic in Wuhan, China. The results indicated that the risk of long-term emission of SARS-CoV-2 to the environment via vent stacks of buildings was low after confirmed patients were hospitalized. SARS-CoV-2 were mainly detected in the liquid phase, as opposed to being detected in aerosols, and its RNA in the sewage of septic tanks could be detected for only four days after confirmed patients were hospitalized. The surveillance of SARS-CoV-2 in sewage could be a sensitive indicator for the possible presence of asymptomatic patients in the community, though the viral concentration could be diluted more than 10 times, depending on the sampling site, as indicated by the Escherichia coli (E. coli) test. The comprehensive investigation of the community sewage drainage system is helpful to understand the occurrence characteristics of SARS-CoV-2 in sewage after excretion with feces and the feasibility of sewage surveillance for COVID-19 pandemic monitoring.

Heterogeneous photo-Fenton decolorization of Orange II over Al-pillared Fe-smectite: response surface approach, degradation pathway, and toxicity evaluation.

A ferric smectite clay material was synthesized and further intercalated with Al2O3 pillars for the first time with the aim of evaluating its ability to be used as heterogeneous catalyst for the photo-Fenton decolorization of azo dye Orange II. UV irradiation was found to enhance the activity of the catalyst in the heterogeneous photo-Fenton process. Catalyst loading of 0.5g/L and hydrogen peroxide concentration of 13.5mM yielded a remarkable color removal, accompanied by excellent catalyst stability. The decolorization of Orange II followed the pseudo-first-order kinetics for initial dye concentrations from 20 to 160mg/L. The central composite design (CCD) based on the response surface methodology (RSM) was applied to evaluate the effects of several operating parameters, namely initial pH, catalyst loading and hydrogen peroxide concentration, on the decolorization efficiency. The RSM model was derived and the response surface plots were developed based on the results. Moreover, the main intermediate products were separated and identified using gas chromatography-mass spectrometry (GC-MS) and a possible degradation pathway was proposed accordingly. The acute toxicity experiments illustrated that the Daphniamagna immobilization rate continuously decreased during 150min reaction, indicating that the effluent was suitable for sequential biological treatment.

Ultrasound-assisted removal of tetracycline from aqueous solution by mesoporous alumina.

This work describes the removal of tetracycline (TC) from aqueous solution using a mesoporous alumina (meso-Al2O3) as adsorbent in the presence of ultrasonic irradiation. Adsorption of TC was investigated under various operating conditions, including pH, adsorbent dosage, ultrasound power, and initial TC concentration. The results showed that the rate of TC sorption was enhanced with the assistance of ultrasound. The TC removal increased with the increase in sorbent dosage, pH and ultrasound power, but decreased with the increase in initial TC concentration. The adsorption isotherm data were fitted properly with the Freundlich model under ultrasonic irradiation, and the adsorption process followed a pseudo-second-order kinetic model.

[Preconcentration of trace Pd (II) on crosslinked chitosan and determination by graphite furnace atomic absorption spectrometry].

A novel crosslinked chitosan(CCTS) not dissolved in acidic or alkaline solutions was synthesized by the crosslinking reaction of chitosan (CTS) with crosslinking agent (3-chloro-1,2-epoxypropane). The adsorption capability of Pd(II ) by CCTS was studied at different pH value. The results showed that the adsorption efficiency was above 98% after preconcentration for 20 minutes when pH values were 1-4. The effects of preconcentration time, dosage of CCTS, adsorption capacity of CCTS, sample volume, coexistent elements, and elution of Pd(II) were investigated. The mechanism of adsorption of CCTS for Pd(II) was discussed. A novel method for the preconcentration and separation of trace Pd(II) with crosslinked chitosan (CCTS) and its determination in water by graphite furnace atomic absorption spectrometry has been developed. The detection limit (3sigma, n=8) was 0.143 microg x L(-1), the relative standard deviation(RSD) was less than 5.47%, and this preconcentration method was used to detect Pd(II) in lake water and sea water with recoveries of 92%-96%. It also can be used to recycle Pd(II).