Low-toxicity natural pyrite on electro-Fenton catalytic reaction in a wide pH range.

The resource utilization of natural pyrite not only reduces secondary pollution but also brings certain environmental benefits. However, the green and efficient use of pyrite presents certain challenges. In this study, a novel electro-Fenton (EF) system was constructed utilizing copper modified graphite felt (GF/Cu) as cathode and natural pyrite (com-FeS2) as catalyst. The results demonstrated that the system exhibited a remarkable stability over an extensive pH range (3.0-10.0) and remained effective even under adverse environmental conditions, such as high salinity or elevated antibiotic concentration. After optimizing the reaction conditions, 0.2 mM sulfamerazine (SMZ) was almost completely degraded within 1.5 h. The results highlighted the catalytic role of Fe(II) on the com-FeS2 surface. Combined with quenching experiments and quantitative analysis of reactive oxygen species (ROS), the removal of SMZ was primarily attributed to the generation of •OH, ordered by 1O2 > â€¢O2- > â€¢OHads, a possible degradation pathway was proposed by HR-LC-MS. The biological toxicity after the reaction was detected, and the introduction of polyvinylpyrrolidone (PVP) was beneficial to reduce the biological toxicity of iron dissolution. This work provides new insights into the green and efficient resource utilization of natural pyrite and significantly expands the pH applicability range of the Fenton process, demonstrating the large-scale industrial application potential of pyrite.

Effect of ciprofloxacin on the one-stage partial nitrification and anammox biofilm system: A multivariate analysis focusing on size-fractionated organic components.

The impact of ciprofloxacin (CIP) in the partial nitrification and anammox biofilm system was investigated by multivariate analysis, focusing on size-fractionated organic components. The CIP dose of 10 µg/L did not inhibit the total nitrogen (TN) removal efficiency, even though the abundance of antibiotic resistant genes (ARGs) (i.e., qnrD, qnrB, qnrA, qnrS, and arcA) was elevated. However, a gradual higher CIP dosing up to 100 µg/L inhibited the TN removal efficiency, while the abundance of ARGs was still increased. Moreover, both the TN removal efficiency and the abundant ARGs were dwindled at 470 µg/L of CIP. As the CIP dose increased from 0 to 100 µg/L, the abundance of high molecular weight (MW) fractions (14,000 to 87,000 Da; 1000 to 14,000 Da) and humic/fulvic acid-like components in the soluble extracellular polymeric substances (HSS) decreased, with more increases of low MW (84-1000 Da; less than 84 Da) fractions and soluble microbial by-products in soluble extracellular polymeric substances (SMPS). Continuously increasing the CIP dose till 470 µg/L, an inverse trend of the changes of these organic components was noted, along with clear reductions of the microbial diversity and richness, and the abundance of key functional genes responsible for nitrogen removal. The predominance of functional gene amoA (related with ammonia oxidizing bacteria) was more significantly with more distribution of SMPS with relatively low MW and less distribution of HSS with relatively high MW, as well as polymer decomposing microorganisms such as Bryobacteraceae and the unclassified Saprospirales.

Visualization of water transfer channel in sludge dewatering conditioned with skeleton builders by X-ray micro-computed tomography.

Skeleton builders were normally deemed to improve the high porosity and newly-generated permeability of sludge cakes by building water transfer channel during high pressure filtration, thus enhancing sludge dewaterability. However, currently a direct visualization proof of water transfer channel was still lacking. This study provided the direct proof for visualizing water transfer channel in dewatered sludge cakes conditioned with a typical skeleton builder (i.e., phosphogypsum (PG)) by X-ray micro-computed tomography (micro-CT) for the first time. After the addition of PG, the pixel value and image luminance increased significantly, indicating the presence of high density substances from both two-dimensional (2D) cross section and three-dimensional (3D) reconstruction CT images. Moreover, the CT numbers showed strong and negative correlations with specific resistance to filtration (SRF) (R = - 0.99, p < 0.05), capillary suction time (CST) (regression coefficient (R) = - 0.87, probability (p) < 0.05), and water content of the dewatered sludge cake (R = - 0.99, p < 0.05), respectively. These results indicated that the X-ray micro-CT could be a potential technique for analyzing the water distribution in sludge samples conditioned with skeleton builders.

Fate of antibiotics and hormones during hydrothermal carbonization of poultry litter: degradation kinetics and toxicity assessment of filtrates and hydrochars.

This study investigated degradation kinetics of five selected organic micropollutants (OMPs) present in poultry litter (namely: sulfadiazine, tetracycline, and doxycycline hyclate (antibiotics); estrone and 17-ß-estradiol (hormones)) during hydrothermal carbonization (HTC) treatment as the temperature stepwise increased to 250 °C. All five pure OMPs were completely degraded before 250 °C was reached during the HTC process. Nevertheless, presence of poultry litter slowed down the degradation of OMPs. Through elemental mass balance calculation, it is noted that after 15 min (temperature less than 137 °C), 69-82% of organic carbon and 50-66% of organic nitrogen initially consisting part of the target antibiotics were fully mineralized. Both HTC filtrates and hydrochars obtained from poultry litter inhibited Escherichia coli and Bacillus subtilis growth. A combination of high salinity, high nutrients, dissolved organic carbon, and other ions in the filtrate as well as the adsorption of OMPs on hydrochars were probably the reason for the high toxicity.