Elimination of Intragrain Defect to Enhance the Performance of FAPbI3 Perovskite Solar Cells by Ionic Liquid.

Ionic liquids have been widely used to improve the efficiency and stability of perovskite solar cells (PSCs), and are generally believed to passivate defects on the grain boundaries of perovskites. However, few studies have focused on the relevant effects of ionic liquids on intragrain defects in perovskites which have been shown to be critical for the performance of PSCs. In this work, the effect of ionic liquid 1-hexyl-3-methylimidazolium iodide (HMII) on intragrain defects of formamidinium lead iodide (FAPbI3) perovskite is investigated. Abundant {111}c intragrain planar defects in pure FAPbI3 grains are found to be significantly reduced by the addition of the ionic liquid HMII, shown by using ultra-low-dose selected area electron diffraction. As a result, longer charge carrier lifetimes, higher photoluminescence quantum yield, better charge carrier transport properties, lower Urbach energy, and current-voltage hysteresis are achieved, and the champion power conversion efficiency of 24.09% is demonstrated. These observations suggest that ionic liquids significantly improve device performance resulting from the elimination of {111}c intragrain planar defects.

One-stone, two birds: One step regeneration of discarded copper foil in zinc battery for dendrite-free lithium deposition current collector.

The ever-growing requirement for electrochemical energy storage has exacerbated the production of spent batteries, and the recycling of valuable battery components has recently received a remarkable attention. Among all battery components, copper foil is widely utilized as a current collector for stable zinc platting and stripping in zinc metal batteries (ZMBs) due to the perfect lattice matching of between metal copper and zinc, which is accompanied by the formation of multiple copper-zinc alloy components during the cycling process. Herein, a novel "two birds with one-stone" strategy through a one simple heat treatment step to revive the discarded copper foil in zinc metal battery is reported to further obtain a lithiophilic current collector (CuxZny-Cu) with multiple copper-zinc alloy components on the surface of the discarded copper foil. Such revived CuxZny-Cu current collector greatly reduces the lithium nucleation overpotential and realizes uniform lithium deposition and further inhibits lithium dendrites growth. The formed multiple CuxZny alloy phases on the surface of discarded copper foil exhibit a low Li nucleation overpotential of only 15 mV at 0.5 mA cm-2 for the first cycle. Moreover, such a CuxZny-Cu current collector could achieve stable cycle for 220 cycles at 0.5 mA cm-2 and 110 cycles at 1 mA cm-2 with a Li plating capacity of 1 mAh cm-2. Theoretical calculations indicate that, compared with pure Cu foil, the formed multiple alloy components of CuZn5, CuZn8, Cu0.61Zn0.39 and CuZn have low adsorption energy of -2.17, -2.55, -2.16 and -2.35 eV with lithium atoms, respectively, which result in reduced lithium nucleation overpotential. The full cell composed of CuxZny alloy current collector with deposition of 5 mAh cm-2 metal Li anode coupled with LiFePO4 (LFP) cathode exhibits a reversible capacity of 125.6 mAh/g after 110 cycles at a current of 0.5 C with capacity retention of 85.1 %. This work proposed a promising strategy to regenerate the discarded copper foil in rechargeable batteries.

A Fluorination Strategy and Low-Acidity Anchoring Group in Self-Assembled Molecules for Efficient and Stable Inverted Perovskite Solar Cells.

Herein, we synthesized two donor-acceptor (D-A) type small organic molecules with self-assembly properties, namely MPA-BT-BA and MPA-2FBT-BA, both containing a low acidity anchoring group, benzoic acid. After systematically investigation, it is found that, with the fluorination, the MPA-2FBT-BA demonstrates a lower highest occupied molecular orbital (HOMO) energy level, higher hole mobility, higher hydrophobicity and stronger interaction with the perovskite layer than that of MPA-BT-BA. As a result, the device based-on MPA-2FBT-BA displays a better crystallization and morphology of perovskite layer with larger grain size and less non-radiative recombination. Consequently, the device using MPA-2FBT-BA as hole transport material achieved the power conversion efficiency (PCE) of 20.32 % and remarkable stability. After being kept in an N2 glove box for 116 days, the unsealed PSCs' device retained 93 % of its initial PCE. Even exposed to air with a relative humidity range of 30±5 % for 43 days, its PCE remained above 91 % of its initial condition. This study highlights the vital importance of the fluorination strategy combined with a low acidity anchoring group in SAMs, offering a pathway to achieve efficient and stable PSCs.

Enhancement of Broadband Reverse Saturable Absorption of Red/Black Phosphorus Heterojunction.

Although laser technology brings convenience to production and daily life, it also causes high-energy damage. Therefore, there is an urgent need to develop optical limiting materials for laser protection. In this study, a novel nonlinear optical material, red/black phosphorus lateral heterojunction, is successfully prepared through solvothermal and ultrasonic treatment. Using the Z-scan method, the nonlinear optical properties of the red/black phosphorus heterojunction are determined at wavelengths of 532 and 1064 nm. These results indicate that the red/black phosphorus heterojunction exhibits reverse saturable absorption properties in 1.2.3-glycerol. Interestingly, the red/black phosphorus heterojunction shows an enhanced performance over red phosphorus by introducing the black phosphorus phase. Moreover, the red/black phosphorus heterojunction is doped into organically modified silicate gel glass with excellent broadband optical limiting performance. This study highlights the promising prospect of the red/black phosphorus heterojunction in the nonlinear optical and optical limiting fields.

CircAKT3 alleviates postoperative cognitive dysfunction by stabilizing the feedback cycle of miR-106a-5p/HDAC4/MEF2C axis in hippocampi of aged mice.

Circular RNAs (circRNAs) have garnered significant attention in the field of neurodegenerative diseases including Alzheimer's diseases due to their covalently closed loop structure. However, the involvement of circRNAs in postoperative cognitive dysfunction (POCD) is still largely unexplored. To identify the genes differentially expressed between non-POCD (NPOCD) and POCD mice, we conducted the whole transcriptome sequencing initially in this study. According to the expression profiles, we observed that circAKT3 was associated with hippocampal neuronal apoptosis in POCD mice. Moreover, we found that circAKT3 overexpression reduced apoptosis of hippocampal neurons and alleviated POCD. Subsequently, through bioinformatics analysis, our data showed that circAKT3 overexpression in vitro and in vivo elevated the abundance of miR-106a-5p significantly, resulting in a decrease of HDAC4 protein and an increase of MEF2C protein. Additionally, this effect of circAKT3 was blocked by miR-106a-5p inhibitor. Interestingly, MEF2C could activate the transcription of miR-106a-5p promoter and form a positive feedback loop. Therefore, our findings revealed more potential modulation ways between circRNA-miRNA and miRNA-mRNA, providing different directions and targets for preclinical studies of POCD.

Structural Effects of 3D Inkjet-Printed Ni(O)-YSZ Pillared Electrodes on Performances of Solid Oxide Electrochemical Reactors.

Increasing densities of reaction sites for gaseous reactants in solid oxide electrochemical reactors (SOERs), is a key strategy for achieving enhanced performance in either fuel cell or electrolysis modes. Fabrication of 3D structured components in SOERs can enhance those densities of reaction sites, which is achieved by 3D inkjet printing with high reproducibility, having developed inks with appropriate properties. First, the effects of pillar geometries on SOER performances are predicted through numerical simulations, enabling subsequent 3D printing to focus on the more effective geometries. Herein, the study reports the results of experimental validation of those predictions by evaluating the electrochemical performances of cells with various heights of 3D inkjet-printed Ni(O)- yttria stabilized zirconia (YSZ) pillars and YSZ pillars. Those measurements prove that increasing pillar heights generally increases SOER peak power densities in fuel cell mode and increased current densities at the thermoneutral potential (1.285 V) in steam electrolysis mode, as predicted by simulations. With increasing pillar heights, more limitations in performance enhancement are found with YSZ electrolyte pillars than with Ni-YSZ pillars, again as predicted by simulations. The subsequent microstructural analysis of Ni-YSZ pillars proves the suitability of the Ni(O)-YSZ composite particle ink formulation and the reliability of 3D printing.

Association of the MMP-3, MMP-9 and MMP-12 gene polymorphisms with COPD risk: a meta-analysis.

Introduction: Given the evidence that the matrix metalloproteinases (MMPs) play an important role in the pathogenesis of chronic obstructive pulmonary disease (COPD), a number of case-control studies have attempted to assess the relationship between genetic polymorphisms in MMP genes and COPD risk. However, reliable measures of these results are lacking. Material and methods: We assessed the published evidence for association of the MMP-3, MMP-9 and MMP-12 polymorphisms with COPD risk using meta-analytic techniques. The odds ratio (OR) and 95% confidence interval (CI) were calculated for each study using fixed or random effect models. Results: A total of 23 case-control studies were included in the meta-analysis. No significant association was observed between the MMP-9 rs3918242 polymorphism and COPD risk in the overall populations under the dominant (T/T + C/T vs. C/C: OR = 1.30, 95% CI: 1.00-1.69, p = 0.054) and allele contrast (T allele vs. C allele: OR = 1.22, 95% CI: 0.97-1.53, p = 0.088) models. However, in sub-group analysis the polymorphism rs3918242 was significant in Asians under the dominant model (T/T + C/T vs. C/C: OR = 1.66, 95% CI: 1.02-2.72, p = 0.043). The results for MMP-12 rs2276109 showed an association with COPD only in mixed populations (G/G + A/G vs. A/A: OR = 1.57, 95% CI: 1.10-2.24, p = 0.013; G allele vs. A allele: OR = 1.52, 95% CI: 1.09-2.14, p = 0.015). We did not find any significant association of the MMP-12 rs652438 and MMP-3 rs35068180 polymorphisms with COPD. Conclusions: The findings of this meta-analysis suggest that there is a risk of COPD associated with the MMP-9 rs3918242 and MMP-12 rs2276109 polymorphisms in certain ethnic groups.

Weakly Supervised AUC Optimization: A Unified Partial AUC Approach.

Since acquiring perfect supervision is usually difficult, real-world machine learning tasks often confront inaccurate, incomplete, or inexact supervision, collectively referred to as weak supervision. In this work, we present WSAUC, a unified framework for weakly supervised AUC optimization problems, which covers noisy label learning, positive-unlabeled learning, multi-instance learning, and semi-supervised learning scenarios. Within the WSAUC framework, we first frame the AUC optimization problems in various weakly supervised scenarios as a common formulation of minimizing the AUC risk on contaminated sets, and demonstrate that the empirical risk minimization problems are consistent with the true AUC. Then, we introduce a new type of partial AUC, specifically, the reversed partial AUC (rpAUC), which serves as a robust training objective for AUC maximization in the presence of contaminated labels. WSAUC offers a universal solution for AUC optimization in various weakly supervised scenarios by maximizing the empirical rpAUC. Theoretical and experimental results under multiple settings support the effectiveness of WSAUC on a range of weakly supervised AUC optimization tasks.

Six-point scleral fixation of a three-looped haptics one-piece posterior chamber intraocular lens by a single suture.

To evaluate a novel technique for six-point scleral fixation of a three-looped haptics posterior chamber intraocular lens (PCIOL) by a single suture. Nine eyes of nine patients were studied from September 2021 to March 2023. All patients had undergone vitrectomy. Only a single 9-0 polypropylene suture was used for scleral fixation. The three looped haptics were fixed at 12, 4, and 8 o'clock with six-point scleral fixation. The entire procedure took about 30 min. Among the nine patients, eight (88.8%) eyes had a significant improvement in best-corrected visual acuity, whereas one (11.2%) eye showed no change. No intraoperative or postoperative complications were observed. By ultrasonic biomicroscopy examination, intraocular lenses were well positioned and stable with no tilt in the horizontal and vertical axis. The method of six-point scleral fixation of a three-looped haptics PCIOL by a single suture is safe and effective.

Expert consensus on the diagnosis, treatment, and prevention of respiratory syncytial virus infections in children.

BACKGROUND: Respiratory syncytial virus (RSV) is the leading global cause of respiratory infections and is responsible for about 3 million hospitalizations and more than 100,000 deaths annually in children younger than 5 years, representing a major global healthcare burden. There is a great unmet need for new agents and universal strategies to prevent RSV infections in early life. A multidisciplinary consensus development group comprising experts in epidemiology, infectious diseases, respiratory medicine, and methodology aims to develop the current consensus to address clinical issues of RSV infections in children. DATA SOURCES: The evidence searches and reviews were conducted using electronic databases, including PubMed, Embase, Web of Science, and the Cochrane Library, using variations in terms for "respiratory syncytial virus", "RSV", "lower respiratory tract infection", "bronchiolitis", "acute", "viral pneumonia", "neonatal", "infant" "children", and "pediatric". RESULTS: Evidence-based recommendations regarding diagnosis, treatment, and prevention were proposed with a high degree of consensus. Although supportive care remains the cornerstone for the management of RSV infections, new monoclonal antibodies, vaccines, drug therapies, and viral surveillance techniques are being rolled out. CONCLUSIONS: This consensus, based on international and national scientific evidence, reinforces the current recommendations and integrates the recent advances for optimal care and prevention of RSV infections. Further improvements in the management of RSV infections will require generating the highest quality of evidence through rigorously designed studies that possess little bias and sufficient capacity to identify clinically meaningful end points.

Electron correlation and relativistic effects on the electronic properties of a plutonium and americium mixed oxide (PuAmO4): from single-particle approximation to dynamical mean-field theory.

First-principles calculations were performed on a plutonium and americium mixed oxide (PuAmO4), aiming at revealing the effects of electron correlation, Pu/Am 5f-conduction electrons' hybridization, and relativity on its electronic properties. The many-body calculation suggests that the spin-orbit-coupling (SOC)-splitting of j = 5/2 and j = 7/2 manifolds are both in the weakly and moderately correlated states, respectively, implying that the jj coupling scheme is more appropriate for Pu/Am 5f electrons. The density of states, 5f occupation numbers, and Green's functions all suggest that both Pu and Am 5f electrons exhibit the coexistence of the localized and delocalized states. The admixture of 5fn atomic configurations, Pu/Am 5f-conduction electrons' hybridization, and dual characteristics of 5f electrons yield average occupation numbers of 5f electrons n5f = 4.78 and 5.86 for Pu and Am ions, respectively. Within the DFT+DMFT calculation, the weighted-summation-derived occupation numbers in terms of 5f4/5f5/5f6 and 5f5/5f6 configurations for Pu and Am 5f electrons, respectively, are in reasonable agreement with those of other DFT-based calculations.

Cinobufotalin prevents bone loss induced by ovariectomy in mice through the BMPs/SMAD and Wnt/ß-catenin signaling pathways.

BACKGROUND: Osteoporosis is a chronic bone disease characterized by bone loss and decreased bone strength. However, current anti-resorptive drugs carry a risk of various complications. The deep learning-based efficacy prediction system (DLEPS) is a forecasting tool that can effectively compete in drug screening and prediction based on gene expression changes. This study aimed to explore the protective effect and potential mechanisms of cinobufotalin (CB), a traditional Chinese medicine (TCM), on bone loss. METHODS: DLEPS was employed for screening anti-osteoporotic agents according to gene profile changes in primary osteoporosis. Micro-CT, histological and morphological analysis were applied for the bone protective detection of CB, and the osteogenic differentiation/function in human bone marrow mesenchymal stem cells (hBMMSCs) were also investigated. The underlying mechanism was verified using qRT-PCR, Western blot (WB), immunofluorescence (IF), etc. RESULTS: A safe concentration (0.25 mg/kg in vivo, 0.05 µM in vitro) of CB could effectively preserve bone mass in estrogen deficiency-induced bone loss and promote osteogenic differentiation/function of hBMMSCs. Both BMPs/SMAD and Wnt/ß-catenin signaling pathways participated in CB-induced osteogenic differentiation, further regulating the expression of osteogenesis-associated factors, and ultimately promoting osteogenesis. CONCLUSION: Our study demonstrated that CB could significantly reverse estrogen deficiency-induced bone loss, further promoting osteogenic differentiation/function of hBMMSCs, with BMPs/SMAD and Wnt/ß-catenin signaling pathways involved.

A modified 23-G trocar and cannula system with lateral micropores for drainage of vitreous humor.

When primary angle-closure glaucoma occurs during an acute attack, routine phacoemulsification is challenging because of the high intra-ocular pressure (IOP) and shallow anterior chamber (AC). To reduce IOP and deepen the AC before phacoemulsification, a portion of the vitreous body is often removed. In this report, we introduce an extended trocar/cannula system with lateral micropores to drain the liquid vitreous before routine phacoemulsification to solve this problem. A modified trocar was used to drain the liquefied vitreous before routine phacoemulsification. We demonstrated that this novel trocar/cannula system is safe and effective for draining liquefied vitreous before routine phacoemulsification. It also facilitates the transition to smooth phacoemulsification.

Towards a potent and rapidly reversible Dexmedetomidine-based general anesthetic.

IN CONCLUSION: Our results suggest that Dex supplemented with a low dose of a second agent creates a potent anesthetic that is rapidly reversed by atipamezole and caffeine.

Effects of oxycodone hydrochloride sustained-release tablets and morphine hydrochloride sustained-release tablets on peripheral blood T cell levels in advanced lung squamous cell carcinoma with moderate to severe cancer pain.

Objective: To investigate the effects of morphine hydrochloride sustained-release tablets and oxycodone hydrochloride sustained-release tablets on T-cell levels in advanced lung squamous cell carcinoma(LUSC) with moderate to severe cancer pain. Methods: A retrospective study was used, ninety-eight patients who were admitted to The First Affiliated Hospital of Hebei North University for treatment of advanced LUSC with moderate to severe cancer pain between January 2021 and December 2021 were randomized into two groups(n=49 each) using the sealed envelope system. The reference group was treated with morphine hydrochloride sustained-release tablets, while the experimental group received oxycodone hydrochloride sustained-release tablets to compare pain relief rates(PRRs), levels of T cells, pain intensity, et al. Blood samples were collected for lymphocyte levels by flow cytometry. Results: The experimental group had significantly higher level than the reference group(P<0.05). Before administration, the two groups did not differ greatly in levels of T-cell subsets or pain scores on the visual analog scale(P>0.05, respectively). At 15 days of administration, the Treg level in the experimental group was higher than in the reference group; T helper 17 and 22 cells were reduced in both groups, and the decrease was more pronounced in the experimental group. At seven and 15 days of administration, the experimental group had a VAS score significantly lower than the reference group(P<0.05). The total adverse reaction rate was significantly lower in the experimental group as compared with the reference group(P<0.05). Conclusions: Oxycodone hydrochloride sustained-release tablets demonstrate desirable efficacy and safety in advanced LUSC with moderate to severe cancer pain by modulating T-cells in the body and improving the PRR.

3D puzzle-inspired construction of large and complex organ structures for tissue engineering.

3D printing as a powerful technology enables the fabrication of organ structures with a programmed geometry, but it is usually difficult to produce large-size tissues due to the limited working space of the 3D printer and the instability of bath or ink materials during long printing sessions. Moreover, most printing only allows preparation with a single ink, while a real organ generally consists of multiple materials. Inspired by the 3D puzzle toy, we developed a "building block-based printing" strategy, through which the preparation of 3D tissues can be realized by assembling 3D-printed "small and simple" bio-blocks into "large and complex" bioproducts. The structures that are difficult to print by conventional 3D printing such as a picture puzzle consisting of different materials and colors, a collagen "soccer" with a hollow yet closed structure, and even a full-size human heart model are successfully prepared. The 3D puzzle-inspired preparation strategy also allows for a reasonable combination of various cells in a specified order, facilitating investigation into the interaction between different kinds of cells. This strategy opens an alternative path for preparing organ structures with multiple materials, large size and complex geometry for tissue engineering applications.

Constructing Hierarchical Polymer Nanocomposites with Strongly Enhanced Thermal Conductivity.

The rapid advancement of communication technology has substantially increased the demand for advanced electronic packaging materials with high thermal conductivity and outstanding electrical insulation properties. In this study, we design polyvinyl alcohol/polydopamine-modified boron nitride nanosheet (PVA/BNNS@PDA) nanocomposites with hierarchical structures by combining electrospinning, vacuum filtration deposition, and hot pressing. The modified BNNS@PDA improves the interaction between the filler and the polymer matrix while reducing the interfacial thermal resistance, resulting in superior thermal conductivity, excellent insulation, and perfect flexibility. The PVA/BNNS@PDA nanocomposites possess an ultrahigh in-plane thermal conductivity of 16.6 W/(m·K) at 35.54 wt % BNNS@PDA content. Even after 2000 folds, the nanocomposites do not undergo any crack, showing their ultrahigh thermal conductivity behavior. Furthermore, the nanocomposites exhibit a volume resistivity above 1014 Ω·cm, which is well above the standard for insulating materials. Based on these results, this work provides a novel method to produce nanocomposites with high thermal conductivity, offering a new perspective to design advanced thermal management materials.