[Research Progress in the Association Between Sarcopenic Obesity and Cancer].

As the global prevalence of obesity and the elderly population continues to increase,the incidence of sarcopenic obesity is also on the rise and becoming a global public health concern.Sarcopenic obesity not only increases the incidence of cancer,but is also associated with poor clinical outcomes in various cancers,such as surgical complications,increased risk of death,and possibly even an impact on chemotherapy as well.Therefore,sarcopenic obesity is emerging as an important indicator of prognosis in cancer patients.However,there are limited relevant studies on the association between sarcopenic obesity and cancer in China.This article reviews the definition and diagnosis of sarcopenic obesity,the clinical correlation between sarcopenic obesity and cancer,and the potential mechanisms,with a view to providing a reference for future clinical practice in China.

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes.

Nickel-rich layered oxides have been regarded as a potential cathode material for high-energy-density lithium-ion batteries because of the high specific capacity and low cost. However, the rapid capacity fading due to interfacial side reactions and bulk structural degradation seriously encumbers its commercialization. Herein, a highly stable hybrid surface architecture, which integrates an outer coating layer of TiO2&Li2TiO3 and a surficial titanium doping by incorporated Ti2O3, is carefully designed to enhance the structural stability and eliminate lithium impurity. Meanwhile, the surficial titanium doping induces a nanoscale cation-mixing layer, which suppresses transition-metal-ion migration and ameliorates the reversibility of the H2 → H3 phase transition. Also, the Li2TiO3 coating layer with three-dimensional channels promotes ion transportation. Moreover, the electrochemically stable TiO2 coating layer restrains side reactions and reinforces interfacial stability. With the collaboration of titanium doping and TiO2&Li2TiO3 hybrid coating, the sample with 1 mol % modified achieves a capacity retention of 93.02% after 100 cycles with a voltage decay of only 0.03 V and up to 84.62% at a high voltage of 3.0-4.5 V. Furthermore, the ordered occupation of Ni ions in the Li layer boosts the thermal stability by procrastinating the layered-to-rock salt phase transition. This work provides a straightforward and economical modification strategy for boosting the structural and thermal stability of nickel-rich cathode materials.

[Detection of Irregular Antibodies after Blood Transfusion for Children with Thalassemia in Hainan].

OBJECTIVE: To investigate the irregular antibody positive rate and antibody specificity in children with thalassemia received long-term blood transfusion in Hainan area and analyze the causes of antibody screening positive. METHODS: Micro-column gel method was used to screen the irregular antibody in 49 children who received transfusion treatment in our hospital, and the antibody specificity of the positive samples was evaluated. RESULTS: Fourteen of 49 cases showed positive for screening. Among them, 11 cases showed Rh blood group antibody after detecting antibody specificity, 1 case showed the coexistence of irregular antibody and autoantibody. One case for anti-JKa and 1 case for anti-JKb. The positive rate of antibody screening was 16.1% (5/31) in males and 50.0% (9/18) in females. The positive rate of antibody screening was higher in females than that in males. The positive rate of antibody screening in Han and Li nationality was 18.4% (7/38) and 63.6% (7/11), respectively. The positive rate of antibody screening in Li nationality was higher than that in Han nationality. After starting blood transfusion treatment, there were 3 cases (15.8%) of antibody screening positive at birth to 6 months old, Three cases (20.0%) of antibody screening positive at 6 months to 1 year old and 8 cases (53.3%) of antibody screening positive at over 1 year old. Three cases with α-thalassemia were negative after screening. Four cases (14.8%) with ß-thalassemia were positive after screening. Nine cases (60.0%) with αß thalassemia were positive after screening, 1 case (25.0%) with undefined type of thalassemia was positive after screening. The positive rate of antibody screening after blood transfusion was highest in children with αß mixed type of thalassemia. Above-mentimed differences were statistically significant (P<0.05). But there was no significant difference between the positive rate of screening by ABO blood group (P>0.05). CONCLUSION: Most of the antibodies produced after long-term blood transfusion in the children with thalassemia belong to Rh blood group antibodies; the children with mixed thalassemia are more likely to produce antibodies; the antibody screening positive rate of Li nationality is higher than that of Han nationality, which may be caused by the genetic difference of blood type between Li nationality and Han nationality.

New Insights into the Mechanism of Enhanced Performance of Li[Ni0.8Co0.1Mn0.1]O2 with a Polyacrylic Acid-Modified Binder.

A binder is an important component in lithium-ion batteries and plays a significant role in maintaining the properties of active substances. Most studies in the field of binders have only focussed on physical properties such as bonding performance. Here, a polyacrylic acid-modified binder was designed and adapted to Li[Ni0.8Co0.1Mn0.1]O2, which enhanced the electrochemical stability of Li[Ni0.8Co0.1Mn0.1]O2 from 30.2 to 66.6% (300 cycles at 1 C). We for the first time discovered that this was caused by a chemical reaction between polyacrylic acid and the residual lithium on the surface during the cycling, which formed a lithium propionic acid coating layer and maintained the stability of the layered structure.

Dual Elements Coupling Effect Induced Modification from the Surface into the Bulk Lattice for Ni-Rich Cathodes with Suppressed Capacity and Voltage Decay.

Injection of phase transition from a layered to rock-salt phase into the bulk lattice and side reactions on the interfacial usually causes structure degradation, quick capacity/voltage decay, and even thermal instability. Here, a self-formed interfacial protective layer coupled with lattice tuning was constructed for Ni-rich cathodes by simultaneous incorporation of Zr and Al in a one-step calcination. The migration energy between Zr and Al from the surface into the bulk lattice induces dual modifications from the surface into the bulk lattice, which effectively decrease the formation of cation mixing, the degree of anisotropic lattice change, and the generation of microcracks. With the stabilization role provided by the doped Zr-Al ions and protective function endowed by the surface layer, the modified cathode material exhibits significantly enhanced capacity and voltage retention. Specifically, the capacity retention for the modified cathode material reaches 99% after 100 cycles at 1 C and 25 °C in a voltage range of 3.0-4.3 V, which outperformed that for the pristine cathode (70%). The declination values of the average voltage for the modified cathode are only 0.025 and 0.097 V after 100 cycles at 1 C in voltage ranges of 3.0-4.3 and 2.8-4.5 V, respectively, which are much lower than those for the pristine cathode (0.230 and 0.405 V). The synchronous accomplishment of modification from the surface into the bulk lattice for Ni-rich materials with multiple elements in a one-step calcination process would provide some referenced value for the preparation of other cathode materials.

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode.

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na0.44 Co0.1 Mn0.9 O2 cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.

Constructing a Protective Pillaring Layer by Incorporating Gradient Mn4+ to Stabilize the Surface/Interfacial Structure of LiNi0.815Co0.15Al0.035O2 Cathode.

Nickel-rich layered oxides are regarded as very promising materials as cathodes for lithium-ion batteries because of their environmental benignancy, low cost, and high energy density. However, insufficient cycle performance and poor thermotic characteristics induced by structural degradation at high potentials and elevated temperatures pose challenging hurdles for nickel-rich cathodes. Here, a protective pillaring layer, in which partial Ni2+ ions occupy Li slabs induced by gradient Mn4+, is integrated into the primary particle of LiNi0.815Co0.15Al0.035O2 to stabilize the surface/interfacial structure. With the stable outer surface provided by the enriched Mn4+ gradient concentration and the pillar effect of the NiO-like phase, Mn-incorporated quaternary cathodes show enhanced structural stability and improved Li+ diffusion as well as lithium-storage properties. Compared with the severe capacity fade of a pure layered structure, the cathode with gradient Mn4+ exhibits more stable cycling behavior with a capacity retention of 80.0% after 500 cycles at 5.0 C.