Gemini cationic surfactant of 1, 3-bis (dodecyl dimethyl ammonium chloride) propane as a novel excellent inhibitor for the corrosion of cold rolled steel in HCl solution.

Gemini surfactants have become the research focus of novel excellent inhibitors because of their special structure (two amphiphilic moieties covalently connected at head group by a spacer) and excellent surface properties. It is proved by theoretical calculations that 1, 3-bis (dodecyl dimethyl ammonium chloride) propane (BDDACP) molecules can perform electron transfer with Fe (110). And it has a small fraction free volume, thus greatly reducing the diffusion and migration degree of corrosive particles. The potentiodynamic polarization curve showed that coefficients of cathodic and anodic reaction less than 1 and polarization resistance increased to 1602.9 Ω cm-2 after added BDDACP, confirming that BDDACP significantly inhibited the corrosion reaction by occupying the active site. The electrochemical impedance spectrum of imperfect semi-circle shows that the system resistance increases and double layer capacitance after added BDDACP. Weight loss tests also confirmed that BDDACP forms protective film by occupying the active sites on steel surface, and the maximum inhibition efficiency is 92 %. Comparison of the microscopic morphology showed that steel surface roughness was significantly reduced after added BDDACP. The results of time-of-flight secondary ion mass spectrometry show that steel surface contains some elements from BDDACP, which confirms the adsorption of BDDACP on steel surface.

Mitigation of biocorrosion of X80 carbon steel by a shale microbiome biofilm using a green biocide enhanced by d-amino acids.

Microbiologically influenced corrosion (MIC) in shale gas field is a major threat with the hydraulic fracturing fluid injected into the subsurface. In this study, the microbiome collected from a shale gas produced water sample was extracted and cultivated in ATCC 1249 medium modified with 10 g/L NaCl anaerobically at 30 °C. d-amino acids, which were reported as biocide enhancers, were found to enhance 2,2-dibromo-3-nitrilopropionamide (DBNPA) biocide on the mitigation of shale microbiome MIC on X80 carbon steel. The combination of 50 ppm (w/w) d-leucine + 50 ppm d-alanine + 1 ppm d-tyrosine had the best enhancement effect on 50 ppm DBNPA with 84 % less weight loss, and 67 % lower corrosion current density (icorr) compared to 50 ppm DBNPA alone. The corrosion data were consistent with the enhanced biofilm inhibition observation. The experimental data also indicated that d-tyrosine used alone at a low dosage of 1 ppm enhanced DBNPA considerably, with 44 % less weight loss and 47 % less icorr. The electrochemical results showed the positive response of shale gas microbiome biofilm to the injected magnetite nanoparticles indicating the extracellular electron transfer might be a main mechanism for its corrosion.

Robust Chiral Metal-Organic Framework Coatings for Self-Activating and Sustainable Biofouling Mitigation.

Surface coatings are designed to mitigate pervasive biofouling herald, a new era of surface protection in complex biological environments. However, existing strategies are plagued by persistent and recurrent biofilm attachment, despite the use of bactericidal agents. Herein, a chiral metal-organic framework (MOF)-based coating with conformal microstructures to enable a new anti-biofouling mode that involves spontaneous biofilm disassembly followed by bacterial eradication is developed. A facile and universal metal-polyphenol network (MPN) is designed to robustly anchor the MOF nanoarmor of biocidal Cu2+ ions and anti-biofilm d-amino acid ligands to a variety of substrates across different material categories and surface topologies. Incorporating a diverse array of chiral amino acids endows the resultant coatings with widespread signals for biofilm dispersal, facilitating copper-catalyzed chemodynamic reactions and inherent mechano-bactericidal activities. This synergistic mechanism yields unprecedented anti-biofouling efficacy elucidated by RNA-sequencing transcriptomics analysis, enhancing broad-spectrum antibacterial activities, preventing biofilm formation, and destroying mature biofilms. Additionally, the chelation-directed amorphous/crystalline coatings can activate photoluminescent properties to inhibit the settlement of microalgae biofilms. This study provides a distinctive perspective on chirality-enhanced antimicrobial behaviors and pioneers a rational pathway toward developing next-generation anti-biofouling coatings for diverse applications.

The long-term transformation of FeIII-AsV coprecipitates at room temperature under oxic conditions: New insights for the fate and the speciation of As.

The long-term stability of FeIII-AsV coprecipitates, a typically hydrometallurgical or naturally produced As-bearing wastes in tailings or in other environments, is critical to evaluating the As risk caused by them. A wide pH range, different Fe/As molar ratios, reaction media, and neutralization reagents were considered in order to find the mechanisms controlling the fate of As during the 1640 days of transformation at 25 °C. The results indicated that at pH 4 and 12, As continuously released from the solid phase. The components and their proportions determined the fate of As at pH 4. However, at pH 12, crystalline calcium carbonates (CCA) formed due to the CO2 in the air and this combined with the adsorption capacity of As on the 2-line ferrihydrite controlling the fate of As. If pH changed to 8 and 10, yukonite formed after the release of As. The CCA also appeared in the presence of Ca. Therefore, these two processes controlled the fate of As at this pH range. These findings are important for understanding and predicting the transport of As under various environmental conditions. The technology chosen for As remediation in soils and As removal from waste waters will also be benefit from these results.

Design and fabrication of intermetallic NiCo electrocatalysts for the alkaline HER.

The design and fabrication of highly efficient electrocatalysts are crucial for reducing energy consumption, improving hydrogen production rates, and prolonging the service life of alkaline electrolyzers. In this study, intermetallic L10-NiCo electrocatalysts were designed using DFT calculations and fabricated through a one-step solid-state reaction method. The DFT calculations indicated that L10-NiCo presented a lower H adsorption Gibbs free energy and a moderate H2O dissociation barrier compared to the commonly used Ni catalyst and disordered NiCo alloy. Increasing the solid-state reaction temperature facilitated the formation of intermetallic L10-NiCo. Electrocatalytic tests for the alkaline HER demonstrated that the ECSA of L10-NiCo nanoparticles increased to 2.3 times, the overpotential decreased by 19%, the electrocatalytic activity increased to 1.5 times, and the stability improved to 2.2 times compared to those of the Ni nanoparticles. This research provides insights into the design and fabrication of highly efficient catalytic electrodes for alkaline electrolyzers.

Elucidating microbial iron corrosion mechanisms with a hydrogenase-deficient strain of Desulfovibrio vulgaris.

Sulfate-reducing microorganisms extensively contribute to the corrosion of ferrous metal infrastructure. There is substantial debate over their corrosion mechanisms. We investigated Fe0 corrosion with Desulfovibrio vulgaris, the sulfate reducer most often employed in corrosion studies. Cultures were grown with both lactate and Fe0 as potential electron donors to replicate the common environmental condition in which organic substrates help fuel the growth of corrosive microbes. Fe0 was corroded in cultures of a D. vulgaris hydrogenase-deficient mutant with the 1:1 correspondence between Fe0 loss and H2 accumulation expected for Fe0 oxidation coupled to H+ reduction to H2. This result and the extent of sulfate reduction indicated that D. vulgaris was not capable of direct Fe0-to-microbe electron transfer even though it was provided with a supplementary energy source in the presence of abundant ferrous sulfide. Corrosion in the hydrogenase-deficient mutant cultures was greater than in sterile controls, demonstrating that H2 removal was not necessary for the enhanced corrosion observed in the presence of microbes. The parental H2-consuming strain corroded more Fe0 than the mutant strain, which could be attributed to H2 oxidation coupled to sulfate reduction, producing sulfide that further stimulated Fe0 oxidation. The results suggest that H2 consumption is not necessary for microbially enhanced corrosion, but H2 oxidation can indirectly promote corrosion by increasing sulfide generation from sulfate reduction. The finding that D. vulgaris was incapable of direct electron uptake from Fe0 reaffirms that direct metal-to-microbe electron transfer has yet to be rigorously described in sulfate-reducing microbes.

CRISPR screens reveal convergent targeting strategies against evolutionarily distinct chemoresistance in cancer.

Resistance to chemotherapy has been a major hurdle that limits therapeutic benefits for many types of cancer. Here we systematically identify genetic drivers underlying chemoresistance by performing 30 genome-scale CRISPR knockout screens for seven chemotherapeutic agents in multiple cancer cells. Chemoresistance genes vary between conditions primarily due to distinct genetic background and mechanism of action of drugs, manifesting heterogeneous and multiplexed routes towards chemoresistance. By focusing on oxaliplatin and irinotecan resistance in colorectal cancer, we unravel that evolutionarily distinct chemoresistance can share consensus vulnerabilities identified by 26 second-round CRISPR screens with druggable gene library. We further pinpoint PLK4 as a therapeutic target to overcome oxaliplatin resistance in various models via genetic ablation or pharmacological inhibition, highlighting a single-agent strategy to antagonize evolutionarily distinct chemoresistance. Our study not only provides resources and insights into the molecular basis of chemoresistance, but also proposes potential biomarkers and therapeutic strategies against such resistance.

Insight into a single-chamber air-cathode microbial fuel cell for nitrate removal and ecological roles.

Bioelectrochemical systems are sustainable and potential technology systems in wastewater treatment for nitrogen removal. The present study fabricated an air-cathode denitrifying microbial fuel cell (DNMFC) with a revisable modular design and investigated metabolic processes using nutrients together with the spatiotemporal distribution characteristics of dominated microorganisms. Based on the detection of organics and solvable nitrogen concentrations as well as electron generations in DNMFCs under different conditions, the distribution pattern of nutrients could be quantified. By calculation, it was found that heterotrophic denitrification performed in DNMFCs using 56.6% COD decreased the Coulombic efficiency from 38.0% to 16.5% at a COD/NO3 --N ratio of 7. Furthermore, biological denitrification removed 92.3% of the nitrate, while the residual was reduced via electrochemical denitrification in the cathode. Correspondingly, nitrate as the electron acceptor consumed 16.7% of all the generated electrons, and the residual electrons were accepted by oxygen. Microbial community analysis revealed that bifunctional bacteria of electroactive denitrifying bacteria distributed all over the reactor determined the DNMFC performance; meanwhile, electroactive bacteria were mainly distributed in the anode biofilm, anaerobic denitrifying bacteria adhered to the wall, and facultative anaerobic denitrifying bacteria were distributed in the wall and cathode. Characterizing the contribution of specific microorganisms in DNMFCs comprehensively revealed the significant role of electroactive denitrifying bacteria and their cooperative relationship with other functional bacteria.

Redox Concomitant Formation Method for Fabrication of Cu(I)-MOF/Polymer Composites with Antifouling Properties.

Marine biofouling, which is one of the technical challenges hindering the growth of the marine economy, has been controlled using cuprous oxide (Cu2O) nanoparticles due to the exceptional antifouling properties of Cu(I) ions. However, Cu2O nanoparticles have encountered bottlenecks due to explosive releases of Cu+ ions, high toxicity at elevated doses, and long-term instability. Here, we present a novel method called Redox Concomitant Formation (RCF) for fabricating a hierarchical Cu(I) metal-organic framework polypyrrole (Cu(I)-MOF/PPy) composite. This method enables in situ phase transition via successive redox reactions that change the chemical valence state and coordination mode of Cu(II)-MOF, resulting in a new structure of Cu(I)-MOF while creating a PPy layer surrounded by the hierarchical structure. Owing to the steady release of Cu+ ions from the Cu(I) sites and photothermal properties of PPy, Cu(I)-MOF/PPy exhibits superior and broad-spectrum resistance to marine bacteria, algae, and surface-adhered biofilms in complex biological environments, as well as long-term stability, resulting in 100 % eradication efficiency under solar-driven heating. Mechanistic insights into successive structural redox reactions and formation using the RCF method are provided in detail, enabling the fabrication of novel MOFs with the desired composition and structure for a wide range of potential applications.

Corrosive Pseudomonas aeruginosa detection by measuring pyocyanin with a lab-on-fiber optical surface plasmon resonance biosensor in aquatic environments.

Oceanic facilities and equipment corrosion present considerable economic and safety concerns, predominantly due to microbial corrosion. Early detection of corrosive microbes is pivotal for effective monitoring and prevention. Yet, traditional detection methods often lack specificity, require extensive processing time, and yield inaccurate results. Hence, the need for an efficient real-time corrosive microbe monitoring technology is evident. Pseudomonas aeruginosa, a widely distributed microorganism in aquatic environments, utilizes its production of quinone-like compounds, specifically pyocyanin (PYO), to corrode metals. Here, we report a novel fiber optic surface plasmon resonance (SPR) sensor modified by the C-terminal of BrlR protein (BrlR-C), which is a specific receptor of PYO molecule, to detect P. aeruginosa in aquatic environments. The results showed that the sensor had a good ability to recognize PYO in the concentration range of 0-1 µg/mL, and showed excellent sensing performance in real-time monitoring the growth status of P. aeruginosa. With a strong selectivity of PYO, the sensor could clearly detect P. aeruginosa against other bacteria in seawater environment, and exhibited excellent anti-interference ability against variations in pH, temperature and pressure and other interfering substances. This study provides a useful tool for monitoring corrosive P. aeruginosa biofilm in aquatic environments, which is a first of its kind example that serves as a laboratory model for the application of fiber optic technology in real-world scenarios to monitoring biofilms in microbial corrosion and biofouling.

The identification of arsenic species produced in the dissolution of crystalline orpiment under anoxic conditions: XAS evidence.

The orpiment (As2S3) is an important secondary mineral in the geochemical process of arsenic (As) in the environment. The dissolution of orpiment has a close relationship with the migration and transformation of As. The dissolved species of As2S3 is closely related to sulfide (S-II) in the anoxic and sulfidic environment. This paper focuses on the various As species formed when As2S3 dissolved in the presence and absence of excess S-II under anoxic conditions with simulation tests via X-ray absorption spectroscopy (XAS), liquid chromatography with (hydride generation) atomic fluorescence spectrophotometry, and Raman spectroscopy. The results showed that the As produced when As2S3 dissolved in the excess S-II contained a mixture of arsenite and thioarsenite (ThioAsIII). Based on the linear combination fitting, ThioAsIII is the dominant As species (88.2 %) with arsenite as the leftover component. However, the percentage of ThioAsIII decreased to 43.7 % if As2S3 dissolved in the absence of excess S-II, indicting ThioAsIII favored under sulfidic conditions. The findings may give further insights about the role and formation mechanism of ThioAsIII in the dissolution process of As2S3. ENVIRONMENTAL IMPLICATION: The dissolution of crystallization orpiment has a close relationship with the transport of As in the environment. Qualitatively and quantitatively identification of the dissolved species of As2S3 in the presence and absence of excess S-II may be helpful for a better understanding and predicting the fate of As. The formed trithioarsenite was the dominant dissolved species compared to arsenite in the sulfidic system. It has higher mobility than AsV and AsIII, and has been found in many As-related adsorption/desorption and redox reactions. Therefore, great cautions should be given when choosing technologies to remediate the As contaminated soils and waters.

Enhanced antibacterial and corrosion resistance of copper-containing 2205 duplex stainless steel against the corrosive bacterium Shewanella algae.

2205 DSS is an excellent corrosion-resistant engineering metal material, but it is still threatened by microbiological corrosion. The addition of copper elements is a new approach to improving the resistance of 2205 DSS to microbiological corrosion. In this study, 2205-Cu DSS was compared with 2205 DSS to study its antimicrobial properties and resistance to microbiological corrosion in the presence of the electroactive bacterium Shewanella algae. The results showed that compared to 2205 DSS, the biofilm thickness and the number of live bacteria on the surface of 2205-Cu DSS were significantly reduced, demonstrating excellent antimicrobial properties against S. algae. Electrochemical tests and surface morphology characterization results showed that the corrosion rate and pitting of 2205-Cu DSS by S. algae were lower than that of 2205 DSS, indicating better resistance to microbiological corrosion. The good antimicrobial properties and resistance to microbiological corrosion exhibited by 2205-Cu DSS are attributed to the contact antimicrobial properties of copper elements in the 2205-Cu DSS matrix and the release of copper ions for antimicrobial effects. This study provides a new strategy for combating microbiological corrosion.

Bioengineering approaches for the endometrial research and application.

The endometrium undergoes a series of precise monthly changes under the regulation of dynamic levels of ovarian hormones that are characterized by repeated shedding and subsequent regeneration without scarring. This provides the potential for wound healing during endometrial injuries. Bioengineering materials highlight the faithful replication of constitutive cells and the extracellular matrix that simulates the physical and biomechanical properties of the endometrium to a larger extent. Significant progress has been made in this field, and functional endometrial tissue bioengineering allows an in-depth investigation of regulatory factors for endometrial and myometrial defects in vitro and provides highly therapeutic methods to alleviate obstetric and gynecological complications. However, much remains to be learned about the latest progress in the application of bioengineering technologies to the human endometrium. Here, we summarize the existing developments in biomaterials and bioengineering models for endometrial regeneration and improving the female reproductive potential.

Expression of filaments of the Geobacter extracellular cytochrome OmcS in Shewanella oneidensis.

The physiological role of Geobacter sulfurreducens extracellular cytochrome filaments is a matter of debate and the development of proposed electronic device applications of cytochrome filaments awaits methods for large-scale cytochrome nanowire production. Functional studies in G. sulfurreducens are stymied by the broad diversity of redox-active proteins on the outer cell surface and the redundancy and plasticity of extracellular electron transport routes. G. sulfurreducens is a poor chassis for producing cytochrome nanowires for electronics because of its slow, low-yield, anaerobic growth. Here we report that filaments of the G. sulfurreducens cytochrome OmcS can be heterologously expressed in Shewanella oneidensis. Multiple lines of evidence demonstrated that a strain of S. oneidensis, expressing the G. sulfurreducens OmcS gene on a plasmid, localized OmcS on the outer cell surface. Atomic force microscopy revealed filaments with the unique morphology of OmcS filaments emanating from cells. Electron transfer to OmcS appeared to require a functional outer-membrane porin-cytochrome conduit. The results suggest that S. oneidensis, which grows rapidly to high culture densities under aerobic conditions, may be suitable for the development of a chassis for producing cytochrome nanowires for electronics applications and may also be a good model microbe for elucidating cytochrome filament function in anaerobic extracellular electron transfer.

Enhanced corrosion of 2205 duplex stainless steel by Acetobacter aceti through synergistic electron transfer and organic acids acceleration.

Acetobacter aceti is a microbe that produces corrosive organic acids, causing severe corrosion of industrial equipment. Previous studies have focused on the organic acid corrosion of A. aceti, but neglected the possibility that it has electron transfer corrosion. This study found that electron transfer and organic acids can synergistically promote the corrosion of 2205 duplex stainless steel (DSS). Electrochemical measurement results showed that corrosion of 2205 DSS was more severe in the presence of A. aceti. Surface analysis indicated a thick biofilm formed on the steel surface, with low pH and dissolved oxygen concentrations under the biofilm. Corrosion intensified when A. aceti lacked a carbon source, suggesting that A. aceti can corrode metals by using metallic substrates as electron donors, in addition to its acidic by-products.

Harnessing active biofilm for microbial corrosion protection of carbon steel against Geobacter sulfurreducens.

Microbiologically influenced corrosion (MIC) caused by corrosive microorganisms poses significant economic losses and safety hazards. Conventional corrosion prevention methods have limitations, so it is necessary to develop the eco-friendly and long-term effective strategies to mitigate MIC. This study investigated the inhibition of Vibrio sp. EF187016 biofilm on Geobacter sulfurreducens on carbon steel. Vibrio sp. EF187016 biofilm reduced the corrosion current density and impeded pitting corrosion. A thick and uniform Vibrio sp. EF187016 biofilm formed on the coupon surfaces, acting as a protective layer against corrosive ions and electron acquisition by G. sulfurreducens. The pre-grown mature Vibrio sp. EF187016 biofilms, provided enhanced protection against G. sulfurreducens corrosion. Additionally, the extracellular polymeric substances from Vibrio sp. EF187016 was confirmed to act as a green corrosion inhibitor to mitigate microbial corrosion. This study highlights the potential of active biofilms for eco-friendly corrosion protection, offering a novel perspective on material preservation against microbial corrosion.

Accelerated corrosion of 316L stainless steel in a simulated oral environment via extracellular electron transfer and acid metabolites of subgingival microbiota.

316L stainless steel (SS) is widely applied as microimplant anchorage (MIA) due to its excellent mechanical properties. However, the risk that the oral microorganisms can corrode 316L SS is fully neglected. Microbiologically influenced corrosion (MIC) of 316L SS is essential to the health and safety of all patients because the accelerated corrosion caused by the oral microbiota can trigger the release of Cr and Ni ions. This study investigated the corrosion behavior and mechanism of subgingival microbiota on 316L SS by 16S rRNA and metagenome sequencing, electrochemical measurements, and surface characterization techniques. Multispecies biofilms were formed by the oral subgingival microbiota in the simulated oral anaerobic environment on 316L SS surfaces, significantly accelerating the corrosion in the form of pitting. The microbiota samples collected from the subjects differed in biofilm compositions, corrosion behaviors, and mechanisms. The oral subgingival microbiota contributed to the accelerated corrosion of 316L SS via acidic metabolites and extracellular electron transfer. Our findings provide a new insight into the underlying mechanisms of oral microbial corrosion and guide the design of oral microbial corrosion-resistant materials.

Burning question: Are there sustainable strategies to prevent microbial metal corrosion?

The global economic burden of microbial corrosion of metals is enormous. Microbial corrosion of iron-containing metals is most extensive under anaerobic conditions. Microbes form biofilms on metal surfaces and can directly extract electrons derived from the oxidation of Fe0 to Fe2+ to support anaerobic respiration. H2 generated from abiotic Fe0 oxidation also serves as an electron donor for anaerobic respiratory microbes. Microbial metabolites accelerate this abiotic Fe0 oxidation. Traditional strategies for curbing microbial metal corrosion include cathodic protection, scrapping, a diversity of biocides, alloys that form protective layers or release toxic metal ions, and polymer coatings. However, these approaches are typically expensive and/or of limited applicability and not environmentally friendly. Biotechnology may provide more effective and sustainable solutions. Biocides produced with microbes can be less toxic to eukaryotes, expanding the environments for potential application. Microbially produced surfactants can diminish biofilm formation by corrosive microbes, as can quorum-sensing inhibitors. Amendments of phages or predatory bacteria have been successful in attacking corrosive microbes in laboratory studies. Poorly corrosive microbes can form biofilms and/or deposit extracellular polysaccharides and minerals that protect the metal surface from corrosive microbes and their metabolites. Nitrate amendments permit nitrate reducers to outcompete highly corrosive sulphate-reducing microbes, reducing corrosion. Investigation of all these more sustainable corrosion mitigation strategies is in its infancy. More study, especially under environmentally relevant conditions, including diverse microbial communities, is warranted.

Microbially Influenced Corrosion of Steel in Marine Environments: A Review from Mechanisms to Prevention.

Microbially influenced corrosion (MIC) is a formidable challenge in the marine industry, resulting from intricate interactions among various biochemical reactions and microbial species. Many preventions used to mitigate biocorrosion fail due to ignorance of the MIC mechanisms. This review provides a summary of the current research on microbial corrosion in marine environments, including corrosive microbes and biocorrosion mechanisms. We also summarized current strategies for inhibiting MIC and proposed future research directions for MIC mechanisms and prevention. This review aims to comprehensively understand marine microbial corrosion and contribute to novel strategy developments for biocorrosion control in marine environments.

The fate of arsenic during the crystallization process of FeIII oxyhydroxides: Effect of reaction media, pH value, and Fe/As molar ratio under relatively low arsenic loading.

Understanding the nature of arsenic (As) adsorbed on FeIII oxyhydroxides, and the subsequent behavior of As during the crystallization process, is critical to predicting its fate in a range of natural and engineered settings. In this work, As adsorbed on FeIII oxyhydroxides formed in the different reaction media at different pH values were characterized with X-ray diffraction (XRD), Raman spectra, transmission electron microscopy (TEM), and extended X-ray absorption fine structure spectroscopy (EXAFS) to determine how As is redistributed during the crystallization process. Results showed that at pH 12, a quarter of the added As was still left in the liquid phase with the formation of goethite and hematite as the major and minor product. The concentration of As was found to be the lowest at pH 4 which is independent of the reaction media, indicating the importance of pH value in the crystallization process of the As adsorbed FeIII oxyhydroxides. Under acidic conditions, sulfate and chloride media favored the formation of goethite and hematite, respectively. Arsenic can indeed be incorporated into the structure of the formed goethite at pH 4. The morphology of the formed products changed to rhombus-like particles if both goethite and hematite appeared as the later as the dominant product.