Comprehensive Overview of Controlled Fabrication of Multifunctional Fluorescent Carbon Quantum Dots and Exploring Applications.

In recent years, carbon dots (CDs) have garnered increasing attention due to their simple preparation methods, versatile performances, and wide-ranging applications. CDs can manifest various optical, physical, and chemical properties including quantum yield (QY), emission wavelength (Em), solid-state fluorescence (SSF), room-temperature phosphorescence (RTP), material-specific responsivity, pH sensitivity, anti-oxidation and oxidation, and biocompatibility. These properties can be effectively regulated through precise control of the CD preparation process, rendering them suitable for diverse applications. However, the lack of consideration given to the precise control of each feature of CDs during the preparation process poses a challenge in obtaining the requisite features for various applications. This paper is to analyze existing research and present novel concepts and ideas for creating CDs with different distinct features and applications. The synthesis methods of CDs are discussed in the first section, followed by a comprehensive overview of the important properties of CDs and the modification strategy. Subsequently, the application of CDs and their requisite properties are reviewed. Finally, the paper outlines the current challenges in controlling CDs properties and their applications, discusses potential solutions, and offers suggestions for future research.

Internal Light Sources-Mediated Photodynamic Therapy Nanoplatforms: Hope for the Resolution of the Traditional Penetration Problem.

Photodynamic therapy (PDT) is an alternative cancer treatment technique with a noninvasive nature, high selectivity, and minimal adverse effects. The indispensable light source used in PDT is a critical factor in determining the energy conversion of photosensitizers (PSs). Traditional light sources are primarily concentrated in the visible light region, severely limiting their penetration depth and making them prone to scattering and absorption when applied to biological tissues. For that reason, its efficacy in treating deep-seated lesions is often inadequate. Self-exciting PDT, also known as auto-PDT (APDT), is an attractive option for circumventing the limited penetration depth of traditional PDT and has acquired significant attention. APDT employs depth-independent internal light sources to excite PSs through resonance or radiative energy transfer. APDT has considerable potential for treating deep-tissue malignancies. To facilitate many researchers' comprehension of the latest research progress in this field and inspire the emergence of more novel research results. This review introduces internal light generation mechanisms and characteristics and provides an overview of current research progress based on the recently reported APDT nanoplatforms. The current challenges and possible solutions of APDT nanoplatforms are also presented and provide insights for future research in the final section of this article.

Molecular Engineering of NIR-II/IIb Emitting AIEgen for Multimodal Imaging-Guided Photo-Immunotherapy.

In view of the great challenges related to the complexity and heterogeneity of tumors, efficient combination therapy is an ideal strategy for eliminating primary tumors and inhibiting distant tumors. A novel aggregation-induced emission (AIE) phototherapeutic agent called T-TBBTD is developed, which features a donor-acceptor-donor (D-A-D) structure, enhanced twisted molecule conformation, and prolonged second near-infrared window (NIR-II) emission. The multimodal imaging function of the molecule has significance for its treatment time window and excellent photothermal/photodynamic performance for multimode therapy. The precise molecular structure and versatility provide prospects for molecular therapy for anti-tumor applications. Fluorescence imaging in the NIR-II window offers advantages with enhanced spatial resolution, temporal resolution, and penetration depth. The prepared AIE@R837 NPs also have controllable performance for antitumor photo-immunotherapy. Following local photo-irradiation, AIE@R837 NPs generate abundant heat, and 1 O2 directly kills tumor cells, induces immunogenic cell death (ICD) as a photo-therapeutic effect, and releases R837, which enhances the synergistic effect of antigen presentation and contributes to the long-lasting protective antitumor immunity. A bilateral 4T1 tumor model revealed that this photo-immunotherapy can eliminate primary tumors. More importantly, it has a significant inhibitory effect on distant tumor growth. Therefore, this method can provide a new strategy for tumor therapy.

Integrated Nanorod-Mediated PD-L1 Downregulation in Combination with Oxidative-Stress Immunogene Therapy against Cancer.

It is an engaging program for tumor treatment that rationalizes the specific microenvironments, activation of suppressed immune system (immune resistance/escape reversion), and synergistic target therapy. Herein, a biomimetic nanoplatform that combines oxidative stress with genetic immunotherapy to strengthen the therapeutic efficacy is developed. Ru-TePt nanorods, small interfering RNA (PD-L1 siRNA), and biomimetic cellular membrane vesicles with the targeting ability to design a multifunctional Ru-TePt@siRNA-MVs system are rationally integrated. Notably, the Fenton-like activity significantly enhances Ru-TePt nanorods sonosensitization, thus provoking stronger oxidative stress to kill cells directly. Meanwhile, immunogenic cell death is triggered to secrete numerous cytokines and activate T cells. The effective catalase characteristics of Ru-TePt enable the in situ oxygen-producing pump to improve tumor oxygen level and coordinately strengthen the therapeutic effect of SDT followed. More importantly, anti-PD-L1-siRNA mediated immune checkpoint silence of the PD-L1 gene creates an environment conducive to activating cytotoxic T lymphocytes, synergistic with boosted reactive oxygen species-triggered antitumor immune response. The experimental results in vitro and in vivo reveal that the Ru-TePt@siRNA-MVs nanosystems can effectively activate the oxidative stress-triggered immune response and inhibit PD-1/PD-L1 axis-mediated immune resistance. Consequently, this orchestrated treatment paradigm provides valuable insights for developing potential oxidative stress and genetic immunotherapy.

Amplifying Dendritic Cell Activation by Bioinspired Nanometal Organic Frameworks for Synergistic Sonoimmunotherapy.

Despite recent advancements of sonodynamic therapy (SDT) in cancer immunotherapy, challenges have yet to be surmounted to further boost its immunotherapeutic efficacy due to the low-level tumor antigens presentation of dendritic cells (DCs). Cell membrane camouflaged-nanoparticles can integrate the neoantigens of the cancer cell membrane with the multifunctionalities of synthetic nanocores. Herein, sono-responsive nanoparticles coated with DC-targeted antibody chimeric cancer cell membrane are investigated for multimodal therapy. The nanometal organic frameworks (MOFs) that respond to ultrasound are loaded successfully inside the vesicles displaying an anti-DEC205 antibody. The anti-DEC205 chimeric vesicles can directly target and activate DCs, promote tumor antigens cross-presentation, and then produce a cascade amplified T-cell immune response. Upon deep tissue-penetrating sonication, AMR-MOF@AuPt generates large amounts of reactive oxygen species that directly kill cancer cells, further initiating an anti-cancer T cell immune response. Such synergistic sono-immunotherapies effectually inhibit tumor growth and induce strong systemic and long-term immune memory against cancer recurrence and distant metastasis. The authors findings provide DCs and tumor cells of a dual active-targeting cell membrane-coated sono-immunotherapeutic nanoplatform for cancer therapy.

Nanotransferrin-Based Programmable Catalysis Mediates Three-Pronged Induction of Oxidative Stress to Enhance Cancer Immunotherapy.

Current oxidative stress amplifying strategies for immunogenic cell death (ICD) promotion are mainly restricted to immune tolerance induced by adaptive cellular antioxidation, limited tumor-selectivity, and tumoral immunosuppression. Herein, a facile and efficient scenario of genetically engineering transferrin-expressing cell membrane nanovesicle encapsulated IR820-dihydroartemisinin nanomedicine (Tf@IR820-DHA) was developed to boost a-PD-L1-mediated immune checkpoint blocking (ICB) via synergetic triple stimuli-activated oxidative stress-associated ICD. We demonstrate that the engineered transferrin of Tf@IR820-DHA has excellent tumor targeting and Fe(III)-loading properties and thus delivered Fe(III) and IR820-DHA nanoparticles (NPs) to the lesion location effectively. We found that the self-carrying Fe(III)-mediated programmable catalysis of DHA and glutathione (GSH) depletion generated plenty of reactive oxygen species (ROS). Moreover, DHA also acted as an immunomodulator to decrease the number of T regulatory cells, thereby remodeling the tumor immune microenvironment and achieving double T cell activation. Furthermore, the IR820 molecule served as a competent sonosensitizer to produce ROS under ultrasound activation and guide precise immunotherapy via fluorescent/photoacoustic (FL/PA) imaging. Through its three-pronged delivery of stimuli-activated oxidative stress (DHA-induced chemodynamic therapy, catalysis-conferred GSH depletion, and IR820-mediated sonodynamic therapy), Tf@IR820-DHA caused high levels of targeted ICD. This significantly increased the proportions of IFN-γ-secreting T cells (CD4+ T and CD8+ T) and enhanced a-PD-L1-mediated ICB against primary and distant tumors, which represents a promising approach for cancer nanoimmunotherapy.

Advances and perspectives in near-infrared fluorescent organic probes for surgical oncology.

Surgical resection of solid tumors is currently the most efficient and preferred therapeutic strategy for treating cancer. Despite significant medical, technical, and scientific advances, the complete treatment of this lethal disease is still a challenging task. New imaging techniques and contrast agents are urgently needed to improve cytoreductive surgery and patient outcomes. Tumor-targeted probes are valuable for guiding a surgical resection of tumor from subjective judgments to visual inspection. Near-infrared (NIR) fluorescent imaging is a promising technology in preclinical and clinical tumor diagnosis and therapy. The rapid development in NIR fluorophores with improved optical properties, targeting strategies, and imaging devices has brought about prospective study of novel NIR nanomaterials for intraoperative tumor detection. In this review, we summarize the recent development in NIR-emitting organic fluorophores and cancer-targeting strategies that specifically target and accumulate in tumors for the molecular imaging of cancerous cells. We believe this technique utilizing new fluorescent probes with an intraoperative optical imaging capacity could provide a more sensitive and accurate method for cancer resection guidance, thereby resulting in better surgical outcomes. This article is categorized under: Diagnostic Tools > in vivo Nanodiagnostics and Imaging Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Facile fabrication of glycosylated and PEGylated carbon nanotubes through the combination of mussel inspired chemistry and surface-initiated ATRP.

Surface modification of carbon nanotubes (CNTs) through controlled living polymerization has demonstrated to be a useful route for preparation of CNTs based polymer composites. However, surface oxidation of CNTs is often required to generate functional groups, which can be further utilized for immobilization of polymerization initiator and grafting polymers. The surface oxidation procedure is rather complex, high energy cost, low efficient and will destroy the structure of CNTs. Therefore, the development of simple and efficient strategies for preparation of CNTs based composites should be of great research interest and raised much attention recently. In this work, a novel mussel inspired strategy that combination of ATRP and ring-opening reaction has been developed for simultaneous preparation of glycosylated and PEGylated CNTs for the first time. CNTs were first coated with polydopamine (PDA) through self-polymerization of dopamine under alkaline aqueous solution. Then polymerization initiator was immobilized on CNT-PDA through simple esterification and amidation reaction to obtain CNT-PDA-Br. The PEGylated CNTs were synthesized through ATRP using CNT-PDA-Br as initiator and polyethylene glycol monoester acrylate and itaconic anhydride (IA) as the monomers. Finally, glucosamine was conjugated with IA via ring-opening reaction. The successful preparation of glycosylated and PEGylated CNTs (CNT-PDA-Poly(PEGMA-co-IA)-Glu) was confirmed by a number of characterization techniques in details. The obtained CNTs based composites showed improved aqueous dispersibility and desirable cytocompatibility, implying their biomedical application potential. As compared with the conventional covalent strategies, the mussel inspired method described in this work will not destroy the structure for introduction functional groups on the surface of CNTs, that can occur under rather mild experimental conditions, including room temperature, short reaction time and aqueous solution. On the other hand, the mussel inspired chemistry can also be used for surface modification of almost any materials regardless of their size, morphology and compositions. Therefore, we believe that the mussel inspired strategy should be a general method for fabrication of various polymer composites for different applications.

Facile fabrication of cross-linked fluorescent organic nanoparticles with aggregation-induced emission characteristic via the thiol-ene click reaction and their potential for biological imaging.

Over the past several years, the biomedical applications of fluorescent organic nanoparticles (FONs) with aggregation-induced emission (AIE) feature have been extensively explored because the AIE-active FONs could effectively overcome the aggregation caused quenching (ACQ) effect of FONs based on conventional organic dyes. The development of novel methods for synthesis of AIE-active FONs plays a centre role for their biomedical applications. In this work, we reported a facile one-step thiol-ene click reaction for fabrication of AIE-active FONs through conjugation of acrylated PEG and AIE-active tetraphenylethylene (TPE) with two ene bonds using pentaerythritol tetra(3-mercaptopropionate) as the linkage. The successful synthesis of TPE containing AIE-active copolymers was evidenced by various characterization techniques. The particle size and fluorescence properties of the resultant TPE-S-PEG copolymers were evaluated by transmission electronic microscopy and fluorescence spectroscopy. Moreover, the cell viability and cell uptake behavior was also examined to evaluate their potential for biological imaging. We demonstrated that the cross-linked TPE-S-PEG show small size, high water dispersibility, low cytotoxicity and strong fluorescence for tracing. All of these advantages endow the TPE-S-PEG FONs great potential for biological imaging applications. Furthermore, this novel click reaction can take place under mild experimental conditions with high efficiency. It could be also further expanded for preparation of multifunctional AIE-active materials due to the universality of the thiol-ene click reaction and good precursor applicapability. Taken together, we have developed a novel and effective thiol-ene click reaction to fabricate the cross-linked AIE-active FONs, which display excellent physicochemical and biological properties and are promising for biomedical applications.

One-step synthesis of europium complexes containing polyamino acids through ring-opening polymerization and their potential for biological imaging applications.

Lanthanide-doped nanoprobes have received significant attentions for utilization in biological sensing and imaging due to their unique optical properties. However, only few works were focused on fabrication of europium complexes based fluorescence polymeric nanoparticles (FPNs) with excellent biocompatibility and biodegradability. In this study, we fabricated the FPNs (named as Eu(TTA)3Phen-GluEG FPNs) with encapsulated europium complexes which show low cytotoxicity, high sensitivity and deep penetration. Free amine group present on europium complexes initiated the ring-opening polymerization (ROP) of side-chain modified glutamic acid NCAs, offering a simple and effective method to prepare europium core FPNs with a uniform size distribution. Europium (III) chelates were furnished with a functional polyamino acid shell to fabricate biocompatible and biodegradable FPNs. Biological evaluation results demonstrate that such fabricated FPNs process excellent biocompatibility and dyeing performance. Therefore, we can expect that the fabrication approach will attract much research interest and effort on the preparation of biodegradable probes for various biological applications.

Facile fabrication of luminescent hyaluronic acid with aggregation-induced emission through formation of dynamic bonds and their theranostic applications.

Aggregation-induced emission (AIE) is an abnormal phenomenon, which has been extensively explored for various applications. Taken advantage of the unique AIE feature, a number of luminescent nanoprobes with strong fluorescence intensity could thus be fabricated through different strategies; however, the fabrication of AIE-active carbohydrate polymers is still challenge owing to the poor solubility of carbohydrate polymers in most of organic solvents. In this work, a rather facile strategy has been developed for fabricating AIE-active sodium hyaluronate (Sh) through the formation of dynamic phenyl borate between the phenylboronic acid groups of AIE dye (An-B(OH)2)) and Sh in a "one-pot" route. This reaction could occur under low temperature, air atmosphere and in the present water. The physicochemical properties, biocompatibility, biological imaging and drug delivery performance of the final An-Sh fluorescent organic nanoparticles (FNPs) were confirmed by different characterization techniques. Results suggested that An-Sh FNPs possess high water dispersibility, strong fluorescence, and good biocompatibility. These excellent properties make An-Sh FNPs great potential for biological imaging and controlled drug delivery applications. In conclusion, we have developed a facile one-pot strategy for the preparation of AIE-active FNPs through the formation of dynamic bonds in rather mild experimental conditions. The outstanding properties and performance of An-Sh FNPs make them promising candidates for biological imaging and controlled drug delivery applications.

Preparation of water dispersible and biocompatible nanodiamond-poly(amino acid) composites through the ring-opening polymerization.

Nanodiamond (ND) is one of the most fascinating carbon materials that have been extensively investigated for biomedical applications owing to its small size, high specific surface areas, chemical inert and desirable biocompatibility. It has been reported that surface modification of ND with polymers could not only improve the dispersibility of final ND based composites but also endow them novel functions to fulfill the requirement for biomedical applications. Although some strategies have been developed previously, surface modification of ND with poly(amino acid)s has not been reported previously. In this work, poly(amino acid)s functionalized ND composites were fabricated through a ring-opening polymerization of α-amino acid N-carboxyanhydrides (NCAs), which was synthesized by conjugation of hydrophilic ethylene glycol with glutamic acid. The successful preparation of ND-GluEG composites was confirmed by a series of characterization techniques. The results suggest that the water dispersibility of final ND-GluEG composites is obviously improved. Moreover, ND-GluEG composites show low toxicity and are of great potential for biomedical applications.

Facile construction of luminescent supramolecular assemblies with aggregation-induced emission feature through supramolecular polymerization and their biological imaging.

Supramolecular polymerization is a novel method for the fabrication of multifunctional polymeric composites that mainly relied on the non-covalent interactions between different components. In this work, a novel and facile strategy has been developed for the construction of fluorescent organic nanoparticles (FONs) with aggregation-induced emission (AIE) characteristic based on the host-guest interaction between ß cyclodextrin terminating polyethylene glycol (ß-CD-PEG) and adamantine (Ad) containing AIE dye (Ph-Ad). Through the host-guest interaction, the fluorescent amphiphiles can be facilely obtained. The characterization results suggested we have successfully prepared the AIE-active FONs through the supramolecular polymerization. The Ph-Ad/ß-CD-PEG FONs possess many advantages such small size, high water dispersibility, desirable fluorescence properties, low cytotoxicity and efficient cell dyeing performance. All of the above results implied that these AIE-active supramolecular assemblies should be promising luminescent probes with great potential for different biomedical applications.

A Novel method for the preparation of fluorescent C60 poly(amino acid) composites and their biological imaging.

Recently, fullerene (C60) and its derivatives have been widely explored for many applications owing to their enriched physical and chemical properties. Specifically, the synthesis and biomedical applications of fluorescent C60 have been extensively investigated previously. However, the preparation of polymer-functionalized fluorescent C60 has not been reported thus far. In this study, water-dispersible fluorescent C60 polymer composites were successfully synthesized through the combination of the thiol-ene click reaction and subsequent ring-opening polymerization. First, 2-aminoethanethiol was introduced on the surface of C60 by the thiol-ene click reaction. The surface of amino group-functionalized C60 (C60-NH2) was further modified with poly(amino acid)s via ring-open polymerization of GluEG N-carboxyanhydrides (NCAs). The morphology, functional groups, optical properties and biocompatibility were examined by a number of characterization equipment and assays in detail. We demonstrated that the resultant fluorescent C60 poly(amino acid) (C60-GluEG) composites have a small size (about 5 nm), high water dispersibility, intense fluorescence and high photostability. Cell viability results implied that the C60-GluEG composites possess low cytotoxicity. Moreover, these C60-GluEG composites can easily penetrate into live cells, indicating their great potential for biological imaging applications.

Room temperature preparation of fluorescent starch nanoparticles from starch-dopamine conjugates and their biological applications.

Fluorescent organic nanoparticles (FONs) have been regarded as the promising candidates for biomedical applications owing to their well adjustment of chemical structure and optical properties and good biological properties. However, the preparation of FONs from the natural derived polymers has been rarely reported thus far. In current work, we reported a novel strategy for preparation of FONs based on the self-polymerization of starch-dopamine conjugates and polyethyleneimine in rather mild experimental conditions, including air atmosphere, aqueous solution, absent catalysts and at room temperature. The morphology, chemical structure and optical properties of the resultant starch-based FONs were investigated by different characterization techniques. Biological evaluation results demonstrated that these starch-based FONs possess good biocompatibility and fluorescent imaging performance. More importantly, the novel strategy might also be extended for the preparation of many other carbohydrate polymers based FONs with different structure and functions. Therefore, this work opens a new avenue for the preparation and biomedical applications of luminescent carbohydrate polymers.

One-pot synthesis of AIE based bismuth sulfide nanotheranostics for fluorescence imaging and photothermal therapy.

Photothermal therapy (PTT) has been widely investigated as a minimally invasive strategy for cancer therapy due to its favorable biosafety. Nevertheless, there is only limited success in the exploration of nanotheranostics composing of both fluorescent dyes and PTT agents since their fluorescence would always be quenched. Herein, a facile one-pot synthesis approach of Aggregation Induced Emission (AIE) based Bi2S3 nanotheranostics is described, and their effectiveness for fluorescence imaging and simultaneous PTT has been demonstrated. AIE incorporated BSA was employed for the biomineralization synthesis of Bi2S3 nanoparticles (NPs), which endowed as-prepared BSA-PhENH2-Bi2S3 NPs with excellent biocompatibility and ultrasmall size. Moreover, the resulted NPs also exhibited remarkable photothermal effect and photostability. Importantly, BSA-PhENH2-Bi2S3 NPs could efficiently get into HepG2 cells, and light their cytoplasm region with bright fluorescence owning to the superb fluorescence property of AIE, which could simultaneously prompt cancer cells death under an 808nm laser irradiation. This work provides a universal approach for the fabrication of AIE based nanotheranostics via albumin-mediated biomineralization method, and the as-prepared BSA-PhENH2-Bi2S3 NPs possess great potential for cancer theranostics.

Biomimetic PEGylation of carbon nanotubes through surface-initiated RAFT polymerization.

Carbon nanotubes (CNTs) are a type of one-dimensional carbon nanomaterials that possess excellent physicochemical properties and have been potentially utilized for a variety of applications. Surface modification of CNTs with polymers is a general route to expand and improve the performance of CNTs and has attracted great research interest over the past few decades. Although many methods have been developed previously, most of these methods still showed some disadvantages, such as low efficiency, complex experimental procedure and harsh reaction conditions etc. In this work, we reported a practical and novel way to fabricate CNTs based polymer composites via the combination of mussel inspired chemistry and reversible addition fragmentation chain transfer (RAFT) polymerization. First, the amino group was introduced onto the surface of CNTs via self-polymerization of dopamine. Then, chain transfer agent can be immobilized on the amino groups functionalized CNTs to obtain CNT-PDA-CTA, which can be utilized for surface-initiated RAFT polymerization. A water soluble and biocompatible monomer poly(ethylene glycol) monomethyl ether methacrylate (PEGMA) was adopted to fabricate pPEGMA functionalized CNTs through RAFT polymerization. The successful preparation of CNTs based polymer composites (CNT-pPEGMA) was confirmed by transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and X-ray photoelectron spectroscopy in details. The CNT-pPEGMA showed good dispersibility and desirable biocompatibility, making them highly potential for biomedical applications. More importantly, a large number of CNTs based polymer composites could also be fabricated through the same strategy when different monomers were used due to the good monomer adaptability of RAFT polymerization. Therefore, this strategy should be a general method for preparation of various multifunctional CNTs based polymer composites.

Preparation of AIE-active fluorescent polymeric nanoparticles through a catalyst-free thiol-yne click reaction for bioimaging applications.

Fluorescent polymeric nanoparticles (FPNs) with aggregation-induced emission (AIE) characteristics have attracted much attention for biomedical applications due to their remarkable AIE feature, high water dispersity and desirable biocompatibility. The development of facile and effective strategies for fabrication of these AIE-active FPNs therefore should be of great importance for their biomedical applications. In this work, we reported that a catalyst-free thiol-yne click reaction can be utilized for fabrication of AIE-active FPNs in short reaction time and even without protection of inert gas. The results indicated that the obtained AIE-active amphiphilic copolymers (PEGMA-PhE) can readily self-assemble into luminescent nanoparticles (PEGMA-PhE FPNs) with high water dispersity, uniform size and morphology, red fluorescence. Cell viability examination and cell uptake behavior of PEGMA-PhE FPNs confirmed that these AIE-active FPNs possess low toxicity towards cells and can be easily internalized by cells through non-specific route. Therefore the remarkable properties of PEGMA-PhE FPNs such as high water dispersity, AIE-active fluorescence and nanoscale size as well as excellent biocompatibility make them promising for biomedical applications.

Microwave-assisted multicomponent reactions for rapid synthesis of AIE-active fluorescent polymeric nanoparticles by post-polymerization method.

The development of simple and effective methods for synthesis of fluorescent polymeric nanoparticles (FPNs) with aggregation-induced emission (AIE) plays an important role for the biomedical applications of AIE-active FPNs. In present work, we developed a facile strategy for the fabrication of AIE-active FPNs by a post-polymerization method based on the microwave-assisted Kabachnik-Fields (KF) reaction, which can conjugate with poly(PEGMA-NH2), AIE-active dye (TPE-CHO) and diethyl phosphate (DP) under microwave irradiation within 5min. The characterization results confirm that PEGMA-TPE FPNs are successfully prepared through the microwave-assisted KF reaction. The resultant AIE-active FPNs show high water dispersity, intensive fluorescence and low cytotoxicity. These features make these AIE-active FPNs great potential for biomedical applications. Moreover, the microwave-assisted KF reaction is simple, fast, atom economy that should be a general strategy for the fabrication of various multifunctional AIE-active FPNs. We believe this work will open up a new avenue for the preparation of AIE-active functional materials with great potential for different applications.

Synthesis and bioimaging of biodegradable red fluorescent organic nanoparticles with aggregation-induced emission characteristics.

Fluorescent organic nanoparticles (FONs) with aggregation-induced emission (AIE) features have recently emerged as promising fluorescent probes for biomedical applications owing to their excellent optical properties, designability and biocompatibility. Significant progress has been made recently for synthesis and biomedical applications of these AIE-active FONs. However, only very limited reports have demonstrated the fabrication of biodegradable AIE-active FONs with red fluorescence emission. In this study, a novel strategy has been developed for the preparation of biodegradable AIE-active polyurethanes (PUs) through a two-step polymerization, in which the diisocyanate-terminated polyethylene glycol (NCO-PEG-NCO) was synthesized and subsequently conjugated with diamine-containing AIE dye (NH2-Phe-NH2). The successful synthesis of AIE-active Phe-PEG2000 PUs is evidenced by a series of characterization techniques. Because of the formation of AIE-active amphiphilic PUs, the final copolymers can self-assemble into spherical nanoparticles, which exhibit strong luminescence and high water dispersion. The biological evaluation results suggest that the AIE-active Phe-PEG2000 FONs possess low toxicity and desirable cell permeability. Therefore, we anticipate that these AIE-active FONs with biodegradable potential will trigger much research enthusiasm and effort toward the creation of new AIE-active materials with improved properties for various biomedical applications.