Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 80
Filtrar
1.
Opt Express ; 32(7): 11419-11428, 2024 Mar 25.
Artigo em Inglês | MEDLINE | ID: mdl-38570990

RESUMO

A 10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser (SFFL) at 1 µm is experimentally demonstrated, based on dual gain saturation effects from semiconductors and optical fibers, together with an analog-digital hybrid optoelectronic feedback loop. Three intensity-noise-inhibited units synergistically work, which actualizes a connection of effective bandwidth and enhancement of noise-suppressing amplitude. With the cascade action of the semiconductor optical amplifier and optical fiber amplifier, the laser power is remarkably boosted. Eventually, an SFFL with an output power of 10.8 W and a relative intensity noise (RIN) below -150 dB/Hz at the frequency range over 1 Hz is realized. More meaningfully, within the total frequency range of 10 Hz to 10 GHz exceeding 29 octaves, the RIN is controlled to below -160 dB/Hz, approaching the shot-noise limit (SNL) level. To the best of our knowledge, this is the lowest RIN result of SFFL within such an extensive frequency range, and this is the highest output power of the near-SNL super-wideband SFFL. Furthermore, a linewidth of less than 0.8 kHz, a long-term stable polarization extinction ratio of 20 dB, and an optical signal-to-noise ratio of over 60 dB are obtained simultaneously. This start-of-the-art SFFL has provided a systematic solution for high-power and low-noise light sources, which is competitive for sophisticated applications, such as free-space laser communication, space-based gravitational wave detection, and super-long-distance space coherent velocity measurement and ranging.

2.
Opt Lett ; 49(3): 434-437, 2024 Feb 01.
Artigo em Inglês | MEDLINE | ID: mdl-38300025

RESUMO

Single-frequency fiber lasers (SFFLs), 1083 nm, have been extensively applied in 4He optical pumping magnetometers (OPMs) for magnetic field detection. However, the sensitivity and accuracy of OPMs are constrained by the frequency stability of SFFLs. Focusing on this concern, the frequency-stabilized performance of the 1083 nm SFFLs is successfully improved by externally tailoring the laser linewidth to match the spectral width of the error signal in saturated absorption spectroscopy. Thereinto, a high-intensity error signal of saturated absorption is generated as a large number of 4He atoms with a wide range of velocities interacting with the 1083 nm laser. Consequently, the root mean square value of the fluctuating frequency after locking is effectively decreased from 24.6 to 13.6 kHz, which achieves a performance improvement of 44.7%. Such a strategy can provide a technical underpinning for effectuating an absolute frequency stabilization with higher precision based on atomic and molecular absorption spectroscopy techniques.

3.
Opt Lett ; 48(23): 6116-6119, 2023 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-38039205

RESUMO

Aiming at applications like expanding usable wave band of optical telecommunication and preparing Sr optical lattice clocks, a 1627 nm single-frequency fiber laser (SFFL) is demonstrated based on a 7-m-long self-designed Er-doped hybridized glass fiber (EDHF) and a linear cavity configuration with a loop mirror filter (LMF). By inserting a 10-m-long unpumped commercial Er-doped fiber as a dynamic Bragg grating into the LMF, a stable single-longitudinal-mode (SLM) laser with an output power of about 10 mW is obtained. The optical signal-to-noise ratio (OSNR) of SFFL is over 50 dB, and the linewidth is about 3.7 kHz. The measured relative intensity noise (RIN) is less than -140 dB/Hz at frequencies of over 0.5 MHz, and a power variation in 1 h is less than ±0.26%. To our best knowledge, it is the first demonstration of a SFFL operating at the U-band. This 1627 nm SFFL can provide advanced light source technology support for many cutting-edge applications.

4.
Opt Lett ; 48(17): 4665-4668, 2023 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-37656581

RESUMO

An ultrafine electro-optical frequency comb (EOFC) with plentiful comb teeth is demonstrated. Adopting a single-frequency fiber laser as a light source, cascade phase modulation based on a sinusoidal signal and a frequency-time transformation (FTT) signal is executed to generate the EOFC with high fineness. Meanwhile, a cyclic fast frequency shifting strategy is introduced to boost the number of comb teeth and the bandwidth of the EOFC. As a result, an EOFC with 12600 comb lines covering a broad bandwidth from -6.3 GHz to 6.3 GHz is established, corresponding to an ultrafine comb space of 1 MHz. Moreover, the power fluctuation of a comb tooth is less than 0.5 dBm. This state-of-the-art EOFC has significant potential in the field of precision spectroscopy.

5.
Biosens Bioelectron ; 241: 115667, 2023 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-37696221

RESUMO

Hemoglobin content is recognized as a momentous and fundamental physiological indicator, especially the precise detection of trace hemoglobin is of great significance for early diagnosis and prevention of tumors, cancer, organic injury, etc. Therefore, high-sensitivity hemoglobin detection is imperative. However, effective detection methods and reliable detection systems are still lacking and remain enormous challenges. Herein, we present a synthetical strategy to break through the existing bottleneck based on polarization-differential spectrophotometry and high-performance single-frequency green fiber laser. Importantly, this framework not only has precisely extracted the two-dimensional information of intensity and polarization during the interaction between laser and hemoglobin, but also has taken advantage of the high monochromaticity and fine directivity in the optimized laser source to reduce the undesirable scattered disturbance. Thus, the hemoglobin detection sensitivity of 7.2 × 10-5 g/L has advanced a hundredfold compared with conventional spectrophotometry, and the responsive dynamic range is close to six orders of magnitude. Results indicate that our technology can realize high-sensitivity detection of trace hemoglobin content, holding promising applications for precision medicine and early diagnosis as an optical direct and fast detection method.


Assuntos
Técnicas Biossensoriais , Espectrofotometria/métodos , Hemoglobinas/análise , Lasers , Luz
6.
Opt Express ; 31(12): 18734-18750, 2023 Jun 05.
Artigo em Inglês | MEDLINE | ID: mdl-37381307

RESUMO

In this article, the vector dynamics of semiconductor optical amplifiers (SOAs) are systematically analyzed and developed to explore its mechanism of intensity noise suppression. First, theoretical investigation on the gain saturation effect and carrier dynamics is performed via a vectorial model, and the calculated result unravels desynchronized intensity fluctuations of two orthogonal polarization states. Particularly, it predicts an out-of-phase case, which allows the cancellation of the fluctuations via adding up the orthogonally-polarized components, then establishes a synthetic optical field with stable amplitude and dynamic polarization, and thereby enables a remarkable relative intensity noise (RIN) reduction. Here, we term this approach of RIN suppression as out-of-phase polarization mixing (OPM). To validate the OPM mechanism, we conduct an SOA-mediated noise-suppression experiment based on a reliable single-frequency fiber laser (SFFL) with the presence of relaxation oscillation peak, and subsequently carry out a polarization resolvable measurement. By this means, out-of-phase intensity oscillations with respect to the orthogonal polarization states are clearly demonstrated, and consequently enable a maximum suppression amplitude of >75 dB. Notably, the RIN of 1550-nm SFFL, suppressed by joint action of OPM and gain saturation effect, is dramatically reduced to -160 dB/Hz in a wideband of 0.5 MHz∼10 GHz, and the performance of which is excellent by comparing with the corresponding shot noise limit of -161.9 dB/Hz. The proposal of OPM here not only facilitates us to dissect the vector dynamics of SOA but also offers a promising solution to realize wideband near-shot-noise-limited SFFL.

7.
Nanomaterials (Basel) ; 13(9)2023 May 05.
Artigo em Inglês | MEDLINE | ID: mdl-37177103

RESUMO

Yellow lasers are of great interest in biology, medicine and display technology. However, nonlinear emission of near-infrared lasers at yellow still presents particularly complex optical alignment to date. Here, to the best of our knowledge, we demonstrate the fabrication of a NaLa(WO4)2: Dy3+ glass-ceramic fiber (GCF) for the first time. More importantly, the emission band of the GCF, which is around 575 nm, has a wide full-width half maximum (FWHM) of 18~22 nm, which is remarkably larger than that of the Dy3+-doped YAG crystal (<7 nm). The precursor fiber (PF) was drawn using the molten core drawing (MCD) method. In particular, benefiting from the in situ nanocrystals fabricated in the amorphous fiber core after thermal treatment, the resultant glass-ceramic fiber exhibits a five-times enhancement of luminescence intensity around 575 nm, compared with the precursor fiber, while retaining its broadband emission. Overall, this work is anticipated to offer a high potential GCF with prominent bandwidth for the direct access of a tunable yellow laser.

8.
ACS Synth Biol ; 12(4): 1109-1118, 2023 04 21.
Artigo em Inglês | MEDLINE | ID: mdl-36972300

RESUMO

Campesterol is a major phytosterol that plays important roles in regulating membrane properties and serves as the precursor to multiple specialized metabolites, such as the phytohormone brassinosteroids. Recently, we established a campesterol-producing yeast strain and extended the bioproduction to 22-hydroxycampesterol and 22-hydroxycampest-4-en-3-one, the precursors to brassinolide. However, there is a trade-off in growth due to the disrupted sterol metabolism. In this study, we enhanced the growth of the campesterol-producing yeast by partially restoring the activity of the sterol acyltransferase and engineering upstream FPP supply. Furthermore, genome sequencing analysis also revealed a pool of genes possibly associated with the altered sterol metabolism. Retro engineering implies an essential role of ASG1, especially the C-terminal asparagine-rich domain of ASG1, in the sterol metabolism of yeast especially under stress. The performance of the campesterol-producing yeast strain was enhanced with the titer of campesterol to 18.4 mg/L, and the stationary OD600 was improved by ∼33% compared to the unoptimized strain. In addition, we examined the activity of a plant cytochrome P450 in the engineered strain, which exhibits more than 9-fold higher activity than when expressed in the wild-type yeast strain. Therefore, the engineered campesterol-producing yeast strain also serves as a robust host for the functional expression of plant membrane proteins.


Assuntos
Fitosteróis , Saccharomyces cerevisiae , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Proteínas de Plantas/genética
9.
Opt Express ; 31(3): 5122-5130, 2023 Jan 30.
Artigo em Inglês | MEDLINE | ID: mdl-36785463

RESUMO

An optimized bidirectional pumping fiber amplifier is demonstrated to achieve low-frequency intensity noise suppression and effective power enhancement simultaneously. Based on the concept analysis of the gain saturation effect, the influence of input signal power and pump power on intensity noise suppression is investigated and optimized systematically. Further combining with the optimization of the pumping configuration to achieve the even-distribution gain, the relative intensity noise (RIN) of 1083 nm single-frequency fiber laser (SFFL) is suppressed with 9.1 dB in the frequency range below 10 kHz. Additionally, the laser power is boosted from 10.97 dBm to 25.02 dBm, and a power instability of ±0.31% is realized. This technology has contributed to simultaneously improving the power and noise performance of the 1083 nm SFFL, which can be applied to a multi-channel helium (He) optically pumping magnetometer. Furthermore, this technique has broken the mindset that power amplification of the conventional fiber amplifiers will inevitably cause the degradation of intensity noise property, and provided a valuable guidance for the development of high-performance SFFLs.

10.
Opt Express ; 30(20): 37101-37111, 2022 Sep 26.
Artigo em Inglês | MEDLINE | ID: mdl-36258627

RESUMO

A pulse compressing technology of single-frequency Q-switched laser based on the cascaded four-wave mixing (CFWM) effect is demonstrated theoretically and experimentally, for the first time to the best of our knowledge. A theoretical model of the pulse compression is established through deconstructing the pulse duration evolution in the high-order Stokes and anti-Stokes lights of CFWM. A pulse compression ratio of (2|m|+1)1/2 is quantificationally obtained with m corresponding to the order number of the CFWM light. Utilizing dual-wavelength (DW) single-frequency Q-switched laser injected into a highly nonlinear fiber (HNLF), the pulse compression and the spectral broadening phenomenon are observed simultaneously. As the order number of the CFWM light increases from 0-order to 3-order, the pulse duration has reduced from 115 ns to 47 ns with a compression ratio of 2.45, which is essentially consistent with the theoretical analysis. The pulse compressing technique by CFWM is conducive to promoting the performance development of the single-frequency Q-switched laser, which can improve the system precision in the Lidar, trace gas detection, and high-precision ranging. Furthermore, this technology based on time-frequency transformation dynamics may be generally applicable to other single-frequency pulsed fiber lasers.

11.
Opt Lett ; 47(17): 4475-4478, 2022 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-36048682

RESUMO

An over-20-octaves-bandwidth ultralow-intensity-noise 1064-nm single-frequency fiber laser (SFFL) is demonstrated based on a comprehensive all-optical technique. With a joint action of booster optical amplifier (BOA) and reflective Yb-doped fiber amplifier (RYDFA), two-fold optical gain saturation effects, respectively occurring in the media of semiconductor and fiber, have been synthetically leveraged. Benefiting from the gain dynamics in complementary time scales, i.e., nanosecond-order carrier lifetime in BOA and millisecond-order upper-level lifetime in RYDFA, the relative intensity noise (RIN) is reduced to -150 dB/Hz from 0.2 kHz to 350 MHz, which exceeds 20-octaves bandwidth. Remarkably, a maximum suppressing ratio of >54 dB is obtained, and the RIN in the range of 0.09-10 GHz reaches -161 dB/Hz which is only 2.3 dB above the shot-noise limit. This broad-bandwidth ultralow-intensity-noise SFFL can serve as an important building block for squeezed light generation, space laser communication, space gravitational wave detection, etc.

12.
Methods Mol Biol ; 2489: 369-393, 2022.
Artigo em Inglês | MEDLINE | ID: mdl-35524060

RESUMO

Plant natural products (PNPs) are valuable resources for the development of pharmaceuticals and agrochemicals, yet the biosynthesis and metabolism of PNPs are largely unknown. Heterologous pathway reconstitution is a heavily adopted strategy in secondary metabolism characterization. Yeast systems have been broadly utilized in the heterologous production of PNPs and have been considered as a promising platform to investigate plant biosynthetic pathways. Here, we describe the reconstitution and verification of the upstream part of brassinolide biosynthesis in S. cerevisiae using this method.


Assuntos
Produtos Biológicos , Vias Biossintéticas , Produtos Biológicos/metabolismo , Vias Biossintéticas/genética , Expressão Gênica , Engenharia Metabólica/métodos , Plantas/genética , Plantas/metabolismo , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo
13.
Opt Lett ; 47(4): 981-984, 2022 Feb 15.
Artigo em Inglês | MEDLINE | ID: mdl-35167574

RESUMO

We report a compact all-fiber passively mode-locked ultrafast laser with a fundamental repetition rate of 1.6 GHz that uses a self-developed long-wavelength active fiber, i.e., a fluoro-sulfo-phosphate-based Er3+/Yb3+ co-doped fiber (only 6.2 cm in length). This active fiber can provide a net gain coefficient of 0.6 dB/cm at 1610 nm. The high-repetition-rate all-fiber mode-locked laser operates at a low pump power of only approximately 90 mW. The mode-locked pulse train has a period of 625 ps and a 3 dB bandwidth of 7.0 nm, which can support a transform-limited pulse width of 390 fs.

14.
Nanoscale ; 13(33): 13995-14000, 2021 Sep 07.
Artigo em Inglês | MEDLINE | ID: mdl-34477679

RESUMO

The upconversion of manganese (Mn2+) exhibits a green light output with a much longer lifetime than that of lanthanide ions, showing great potential in the frontier applications like information security and anti-counterfeiting. Mn2+ can be activated by energy migration upconversion. However, there exists serious quenching interactions between Mn2+ and the lanthanides at the core-shell interfacial area, which would markedly reduce the role of Tm3+ as a ladder to facilitate the up-transition and subsequently limit the upconversion of Mn2+. Here, we propose a mechanistic strategy to enhance the upconversion luminescence of Mn2+ by spatial control of energy migration among Gd sublattice through introducing an additional migratory NaGdF4 interlayer within the commonly used core-shell nanostructure. This design can not only isolate the interfacial quenching interactions between the sensitized core and luminescent shell, but also allow an efficient channel for energy transport, resulting in enhanced upconversion of Mn2+. Moreover, the relatively long lifetime of Mn2+ (around 32.861 ms) provides new possibilities to utilize the temporal characteristic for the frontier application of multi-level anti-counterfeiting through combining the time-gating technology.

15.
Appl Opt ; 60(34): 10684-10688, 2021 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-35200933

RESUMO

Based mainly on the distributed Bragg reflector (DBR) short linear cavity with a 1.6-cm-long heavily Tm3+-doped germanate glass fiber and semiconductor saturable absorber mirror (SESAM), a compact passively Q-switched single-frequency fiber laser at around 1950 nm is demonstrated experimentally. By comparing pulse characters of Q-switched operations fulfilled via SESAMs with different parameters, a stable output pulse is optimized to deliver a maximum average power of 22.2 mW, a peak power of 0.67 W, and an optical signal-to-noise ratio over 61 dB. Moreover, the repetition rate of the output pulse can be tuned from 92 to 520 kHz with a narrowest pulse width of 64 ns. To the best of our knowledge, this is the first time a 2.0 µm passively Q-switched single-frequency DBR Tm3+-doped fiber laser has been realized, and it shows great potential application in remote sensing, biomedical science, and nonlinear optics.

16.
Opt Lett ; 45(19): 5484-5487, 2020 Oct 01.
Artigo em Inglês | MEDLINE | ID: mdl-33001925

RESUMO

In this Letter, a bidirectional amplifier configuration suppressing the relative intensity noise in a 1950-nm linearly polarized single-frequency fiber laser (SFFL) is proposed. The scheme to amplify the signal in a nonlinear saturated amplification regime with low gain distribution for suppressing the RIN is theoretically analyzed. By optimizing the input power level and reflectivity of the bidirectional power-amplifier, the RIN is decreased maximally by >24dB within the frequency range of 200 kHz. A stable output power of over 5.16 W with a polarization extinction ratio of 21.2 dB is obtained. Additionally, the amplified signal maintains a linewidth of 7.1 kHz nearly identical with that of the seed, both with a signal-to-noise ratio of more than 60 dB. This all-optical technique on noise suppression applied to the fiber amplifier paves the way to realize low-noise SFFL with power improvement.

17.
ACS Synth Biol ; 9(11): 3157-3170, 2020 11 20.
Artigo em Inglês | MEDLINE | ID: mdl-33085451

RESUMO

As essential structural molecules for plant plasma membranes, phytosterols are key intermediates for the synthesis of many downstream specialized metabolites of pharmaceutical or agricultural significance, such as brassinosteroids and withanolides. Saccharomyces cerevisiae has been widely used as an alternative producer for plant secondary metabolites. Establishment of heterologous sterol pathways in yeast, however, has been challenging due to either low efficiency or structural diversity, likely a result of crosstalk between the heterologous phytosterol and the endogenous ergosterol biosynthesis. For example, in this study, we engineered campesterol production in yeast using plant enzymes; although we were able to enhance the titer of campesterol to ∼40 mg/L by upregulating the mevalonate pathway, no conversion to downstream products was detected upon the introduction of downstream plant enzymes. Further investigations uncovered two interesting observations about sterol engineering in yeast. First, many heterologous sterols tend to be efficiently and intensively esterified in yeast, which drastically impedes the function of downstream enzymes. Second, yeast can overcome the growth deficiency caused by altered sterol metabolism through repeated culture. By employing metabolic engineering, strain evolution, fermentation engineering, and pathway reconstitution, we were able to reconstruct the multienzyme pathways for the synthesis of a set of phytosterols: campesterol (∼7 mg/L), ß-sitosterol (∼2 mg/L), 22-hydroxycampesterol (∼1 mg/L), and 22-hydroxycampest-4-en-3-one (∼4 mg/L). This work identified and addressed some of the technical bottlenecks in phytosterol-derived pathway reconstitution in the baker's yeast and opens up opportunities for efficient bioproduction and metabolic pathway elucidation of this group of phytochemicals.


Assuntos
Vias Biossintéticas/genética , Fitosteróis/biossíntese , Fitosteróis/genética , Saccharomyces cerevisiae/genética , Fermentação/genética , Engenharia Metabólica/métodos , Plantas/genética
18.
Appl Opt ; 59(26): 7907-7911, 2020 Sep 10.
Artigo em Inglês | MEDLINE | ID: mdl-32976463

RESUMO

Noise-sideband-free and narrow-linewidth photonic microwave generation based on an optical heterodyne technique is demonstrated experimentally. By beating a self-injection-locking low-noise single-frequency fiber laser and a Brillouin fiber laser, a 9.4 GHz microwave is produced, and its noise sidebands are completely suppressed. Additionally, the signal-to-noise ratio of the microwave signal is improved by 15 dB from 40 to 55 dB, and the linewidth is compressed from 1.6 to 0.53 kHz. The high-performance photonic microwave based on low-noise fiber lasers is a promising candidate in further applications such as wireless network, lidar, and satellite communication.

19.
J Ind Microbiol Biotechnol ; 47(9-10): 829-843, 2020 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-32661815

RESUMO

With the rapid development of synthetic biology and metabolic engineering technologies, yeast has been generally considered as promising hosts for the bioproduction of secondary metabolites. Sterols are essential components of cell membrane, and are the precursors for the biosynthesis of steroid hormones, signaling molecules, and defense molecules in the higher eukaryotes, which are of pharmaceutical and agricultural significance. In this mini-review, we summarize the recent engineering efforts of using yeast to synthesize various steroids, and discuss the structural diversity that the current steroid-producing yeast can achieve, the challenge and the potential of using yeast as the bioproduction platform of various steroids from higher eukaryotes.


Assuntos
Engenharia Metabólica , Saccharomyces cerevisiae , Esteróis , Saccharomyces cerevisiae/metabolismo , Esteróis/química , Biologia Sintética
20.
Opt Lett ; 45(8): 2263-2266, 2020 Apr 15.
Artigo em Inglês | MEDLINE | ID: mdl-32287209

RESUMO

We report a narrow linewidth and low threshold single-frequency distributed Bragg reflector (DBR) fiber laser at 1120 nm based on a short 1.5 cm long Nd-doped silica fiber which, to the best of our knowledge, is the first demonstration of a Nd-doped fiber-based single-frequency fiber laser with a wavelength greater than 1100 nm. A stable single-longitudinal-mode laser operation with a signal-to-noise ratio greater than 67 dB was verified by a scanning Fabry-Perot interferometer. The laser threshold is as low as 10 mW. The DBR fiber laser has a maximum output power of 15 mW and optical-to-optical efficiency for the launched pump power reaches more than 8%. The narrow linewidth of 71.5 kHz is obtained in such a single-frequency fiber laser (SFFL). Our result is expected to offer an exciting new opportunity to realize high-performance SFFLs above 1100 nm.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA