China's air quality improvement strategy may already be having a positive effect: evidence based on health risk assessment.

Aiming to investigate the health risk impact of PM2.5 pollution on a heavily populated province of China. The exposure response function was used to assess the health risk of PM2.5 pollution. Results shows that the total number of premature deaths and diseases related to PM2.5 pollution in Shandong might reach 159.8 thousand people based on the new WHO (2021) standards. The health effects of PM2.5 pollution were more severe in men than in women. Five of the 16 cities in Shandong had higher health risks caused by PM2.5 pollution, including LinYi, HeZe, JiNing, JiNan, and WeiFang. PM2.5 pollution resulted in nearly 7.4 billions dollars in healthy economic cost, which accounted for 0.57% of GDP in Shandong in 2021. HeZe, LiaoCheng, ZaoZhuang, and LinYi were the cities where the health economic loss was more than 1% of the local GDP, accounted for 1.30, 1.26, 1.08, and 1.04%. Although the more rigorous assessment criteria, the baseline concentration was lowered by 30 µg/m3 compared to our previous study, there was no significant increase in health risks and economic losses. China's air quality improvement strategy may already be having a positive effect.

Facile synthesis of ZIF-8-lignosulfonate microspheres with ultra-high adsorption capacity for Congo red and tetracycline removal from water.

Zeolitic imidazolate frameworks (ZIFs) can be used as adsorbent to efficiently adsorb organic pollutants. However, the hydrophobicity of the ZIFs may be easily to form ZIFs nanoparticles aggregates, hampering the effective and practical application in adsorption. In this study, novel spherical composites of ZIF-8 incorporated with lignosulfonate (LS) were synthesized by in-situ growth method. The effects of different mass ratios of LS and Zn in ZIF-8-LS composites were evaluated with respect to structural characteristics and adsorption properties. As an adsorbent for adsorptive removing Congo Red (CR) and tetracycline (TC) from water, the prepared ZIF-8-LS4 shows the best adsorption capacity of 31.5 mg g-1 and 48 mg g-1, respectively. The spherical structure facilitates the contact between the ZIF-8 and the adsorbed substance, in addition to the H-bonding, electrostatic and π-π stacking interactions also contribute to the improvement of the adsorption performance of the ZIF-8-LS4 composite. The outstanding adsorption capacity and good reusability of the ZIF-8-LS4 composite provide a good prospect for the effective removal of other contaminants from water.

Functionalized agarose hydrogel with in situ Ag nanoparticles as highly recyclable heterogeneous catalyst for aromatic organic pollutants.

In the present research work, a highly recyclable catalyst of Ag-based agarose (HRC-Ag/Agar) hydrogel was successfully fabricated through a simple and efficient in situ reduction method without the aid of additional surface active agent. The interaction between the rich hydroxyl functional (-OH) groups in agarose and Ag can effectively control the growth and dispersion of Ag nanoparticles (NPs) in the HRC-Ag/Agar hydrogel and keep Ag NPs free from chemical contamination, which also guarantees the reusability of HRC-Ag/Agar hydrogel as catalysts. HRC-Ag/Agar hydrogel without freeze drying and calcination was investigated for their potential applications as highly active/recyclable catalysts in reducing aromatic organic pollutants (p-nitrophenol (4-NP), methylene blue (MB) and rhodamine B (RhB)) by KBH4. The optimal HRC-Ag/Agar-1.9 hydrogel can complete the catalytic reduction of 4-NP within 11 min. Moreover, HRC-Ag/Agar-1.9 hydrogel achieves the high conversion rate (> 99%) through ten catalytic runs. Similarly, HRC-Ag/Agar-1.9 hydrogel was able to achieve a reduction efficiency of RhB at 98% within 17 min and that of MB at 95% within 40 min. The advantages of simple synthetic procedure, no secondary pollution, strong stability and easily separated make the HRC-Ag/Agar hydrogel have great potential prospect for environmental applications.

Intermolecular hydrogen bond ruptured by graphite with different lamellar number.

Intermolecular hydrogen bonds are formed through the electrostatic attraction between the hydrogen nucleus on a strong polar bond and high electronegative atom with an unshared pair of electrons and a partial negative charge. It affects the physical and chemical properties of substances. Based on this, we presented a physical method to modulate intermolecular hydrogen bonds for not changing the physical-chemical properties of materials. The graphite and graphene are added into the glycerol, respectively, by being used as a viscosity reducer in this paper. The samples are characterized by Raman and 1H-nuclear magnetic resonance. Results show that intermolecular hydrogen bonds are adjusted by graphite or graphene. The rheology of glycerol is reduced to varying degrees. Transmission electron microscopes and computer simulation show that the spatial limiting action of graphite or graphene is the main cause of breaking the intermolecular hydrogen bond network structure. We hope this work reveals the potential interplay between nanomaterials and hydroxyl liquids, which will contribute to the field of solid-liquid coupling lubrication.

Environmental implications of reduced electricity consumption in Wuhan during COVID-19 outbreak: A brief study.

Due to the COVID-19 outbreak, Wuhan was locked down from 23 January 2020 to 8 April 2020, a total of 76 days. It is well known that the electricity consumption is a direct reflection of human activity. During the lockdown of Wuhan, most of human activities were forbidden. The reduction in human activity would inevitably lead to a reduction in electricity consumption. At the same time, anthropogenic emissions of air pollutants would also be reduced with the reduction of human activity. In this study, the correlation between electricity consumption and air pollutants during lockdown was discussed in detail. The result showed that the drop in pollutants concentrations in January should be attributed to the washout effect of rainfall rather than the lockdown. The decrease of electricity consumption in the secondary industry might play a significant role on the decrease of PM 2.5 and NO2 concentrations in Wuhan in February 2020. The decrease in NO2 concentration in March should be attributed to the reduction of pollutants emissions from the tertiary industry, which means that more attention should be paid to the control of NO2 emission in the tertiary industry. Due to reduced emissions from local sources, the role of long-range transport sources might be more significant during the lockdown of Wuhan. By PSCF analysis, southeast of Wuhan could be the major potential emission sources of PM 2.5 , especially in the northern part of Jiangxi province. It was suggested that stricter regulation of pollutants emissions should be implemented in this area.

Unexpectedly Increased Particle Emissions from the Steel Industry Determined by Wet/Semidry/Dry Flue Gas Desulfurization Technologies.

"Ultralow-emission" standards have started to be implemented for steel plants in China. Flue gas desulfurization (FGD) systems integrating desulfurization and dedusting, common end-of-pipe technologies before the stacks, have been a key process for controlling the complexity of sintering flue gas to meet ultralow-emission requirements. This study reports comprehensive analysis of the influence of wet/semidry/dry FGD systems on particulate emissions via a field investigation of five typical sinter plants equipped with various FGD devices. The size distribution and mass concentration of particulate matter (PM) are adjusted to different ranges by these FGD systems. Chemical analysis of the PM compositions shows that 20-95% of the mass of inlet PM is removed by FGD systems, while it is estimated that approximately 17, 63, 59, and 71% of the outlet PMs are newly contributed by desulfurizers and their byproducts for the tested wet limestone, wet ammonia, semidry circulating fluidized bed, and activated coke FGD systems, respectively. The newly contributed compositions of PM2.5 emitted from these FGD systems are dominated by CaSO4, (NH4)2SO4, CaSO4 + CaO, and coke carbon, respectively. These results suggest that the deployment of FGD technology should be comprehensively considered to avoid additional negative impacts from byproducts generated in control devices on the atmosphere.

Characteristics of atmospheric bacterial and fungal communities in PM2.5 following biomass burning disturbance in a rural area of North China Plain.

Biomass burning (BB) in North China Plain has been urgent issue in recent years due to the severe environmental impaction. Bacteria and fungi are ubiquitous in particulate matter. Their taxonomic composition, concentration, ecophysiological functions have potentially important implications in atmospheric biochemical cycle and human health. However, current knowledge about airborne microbes during biomass burning period is scant. Here we investigated bacterial and fungal community composition, abundance and potential function in Yucheng, the center of the North China Plain during summer harvest season in 2014. Monthly field observation suggested serious pollution with high concentration of PM2.5 and water-soluble ions during biomass burning period. Elevated total bacterial and fungal concentration determined by real-time quantitative PCR was observed for samples during burning events. The predominant bacterial taxa were gram-negative, e.g. Acinetobacter, Cyanobacterium, Janthinobacterium, Massilia, Pseudomonas, accounted for 70.9% of total bacteria. The filamentous fungi Alternaria, Aspergillus, Cladosporium and Penicillium were predominant fungal genera. Metastats analysis showed significant disparity in terms of carbohydrate, amino acids metabolism, human and plant disease predicted by PICRUSt analysis between BB and non-BB events. Microbial community structure were mainly influenced by organic carbon and water-soluble ions (magnesium and potassium) suggested by redundancy analysis (RDA) and co-occurrence analysis. Our data yielded insights into microbial community dynamics following biomass burning disturbance. This study may provide potentially important reference for environmental, agricultural and health management.

Profile of inhalable bacteria in PM2.5 at Mt. Tai, China: Abundance, community, and influence of air mass trajectories.

Bacteria are ubiquitous in the near-surface atmosphere where they constitute an important component of aerosols with the potential to affect climate change, ecosystems, atmospheric process and human health. Limitation in tracking bacterial diversity accurately has thus far prevented the knowledge of airborne bacteria and their pathogenic properties. We performed a comprehensive assessment of bacterial abundance and diverse community in PM2.5 collected at Mt. Tai, via high-throughput sequencing and real-time PCR. The samples exhibited a high microbial biodiversity and complex chemical composition. The dominating populations were gram-negative bacteria including Burkholderia, Delftia, Bradyrhizobium, and Methylobacterium. The PM mass concentration, chemical composition, bacterial concentration and community structure varied under the influence of different air-mass trajectories. The highest mass concentration of PM2.5 (61 µg m-3) and major chemical components were recorded during periods when marine southeasterly air masses were dominant. The local terrestrial air masses from Shandong peninsula and its adjacent areas harbored highest bacterial concentration loading (602 cells m-3) and more potential pathogens at the site. In contrast, samples influenced by the long-distance air flow from Siberia and Outer Mongolia were found to have a highest richness and diversity as an average, which was also marked by the increase of dust-associated bacteria (Brevibacillus and Staphylococcus). The primary research may serve as an important reference for the environmental microbiologist, health workers, and city planners.

Size distribution of bioaerosols from biomass burning emissions: Characteristics of bacterial and fungal communities in submicron (PM1.0) and fine (PM2.5) particles.

The North China Plain is the agricultural heartland in China. High PM2.5 levels and elevated chemical pollutants have been observed during crop harvest seasons due to open biomass burning. Biomass burning in the wheat-harvest season may significantly deteriorate the regional air quality. The harmful ingredients in smoke particles also have severe implications for toxicity and health effects. Previous studies have illustrated the potential role of bioaerosols as ice-nuclei and cloud condensation nuclei and highlighted their influence on biochemical cycles and human health effects. In a monthly field observation campaign of biomass burning conducted at the summit of Mount Tai in July 2015, we reported the composition, potential role, size distribution of microorganisms in particulate matters PM1.0, PM2.5, and estimated their contribution to particles. The wide-range particle spectrometer suggested that the predominant particles were distributed in submicron particles (PM1.0), which resulted in a similar community structure for bacteria and fungi in PM1.0 and PM2.5. Among bacteria, the predominant Pseudomonas accounted for 18.06% and 21.29% in PM1.0 and PM2.5, respectively. Alternaria covered up to 69.01% and 72.76% of the fungal community in PM1.0 and PM2.5, respectively. A disparity between bacterial communities was identified by the abundance of rare species, such as Bacilli being higher in PM1.0 (2.4%) than in PM2.5 (1.8%), and Defluviicoccus being higher in PM2.5 (2.5%) than in PM1.0 (0.5%), which may be related to cell size and cell growth patterns. Quantitative PCR revealed that microbial cell numbers in PM2.5 were higher than in PM1.0, and that the bacterial cell number was about an order of magnitude greater than the fungal cell number. However, the mass concentration and contribution of fungi to particulate matter was much higher than that of bacteria, suggesting the underestimated role of fungi in atmospheric aerosols. Airborne microorganisms in alpine areas remained less characterized. The findings presented here illustrated the potentially important impacts on air quality and bioaerosol pollution by biomass burning, which provides an essential reference for understanding the transmission and health effects of bioaerosols.

Fog composition along the Yangtze River basin: Detecting emission sources of pollutants in fog water.

To investigate the fog chemistry along the Yangtze River basin, a field observation experiment was performed from Shanghai to Wuhan during November 2015. Fifteen fog water samples were collected by using a three-stage Caltech Active Strand Cloud water Collector (CASCC). The three-stage CASCC was mounted on the board of a ship. PH, electrical conductivity (EC), H2O2, HCHO, S(IV), ten inorganic ions, seven organicacids and sixteen trace metal elements were measured in this study. The pH of fog water samples ranged from weakly acidic (pH4.3) to weakly alkaline (pH7.05) and the EC ranged from 32.4 to 436.3µS/cm. The main cations in fog water were NH4+ and Ca2+, accounting for 12.35% and 29.07% of those inorganic ions, respectively. In addition, SO42- and NO3- contributed to 25.52% and 12.93% to total anion concentrations respectively. Moreover, the dominant kinds of organicacids were formate and oxalate, occupying 45.28% and 28.03% of the total organicacids, respectively. For trace metal elements in fog samples, Al, Fe, Zn, and Ba revealed 34.6%, 16.4%, 19.3%, and 20.9% contributions to these sixteen trace element concentrations, respectively. The results indicated that pollutants were mainly from human activities, including fossil fuel combustion, biomass burning, steel-making, stone quarrying and sand digging. Besides, natural sources including natural background levels and long-range transport of sea salt particles also aggravated the pollution levels in the fog events along the Yangtze River.

Six sources mainly contributing to the haze episodes and health risk assessment of PM2.5 at Beijing suburb in 2016.

Aiming to a better understanding sources contributions and regional sources of fine particles, a total of 273 filter samples (159 of PM2.5 and 114 of PM1.0) were collected per 8 h during the winter 2016 at a southwest suburb of Beijing. Chemical compositions, including water soluble ions, organic carbon (OC), and elemental carbon (EC), as well as secondary organic carbon (SOC), were systematically analyzed and estimated. The total ions concentrations (TIC), OC, and SOC of PM2.5 were with the following order: 16:00-24:00 > 08:00-16:00 > 00:00-08:00. Since primary OC and EC were mainly attributed to the residential combustion in the night time, their valley values were observed in the daytime (08:00-16:00). However, the highest ratio value of SOC/OC was observed in the daytime. It is because that SOC is easily formed under sunshine and relatively high temperature in the daytime. Positive matrix factorization (PMF), clustering, and potential source contribution function (PSCF) were employed for apportioning sources contributions and speculating potential sources spatial distributions. The average concentrations of each species and the source contributions to each species were calculated based on the data of species concentrations with an 8 h period simulated by PMF model. Six likely sources, including secondary inorganic aerosols, coal combustion, industrial and traffic emissions, road dust, soil and construction dust, and biomass burning, were contributed to PM2.5 accounting for 29%, 21%, 17%, 16%, 9%, 8%, respectively. The results of cluster analysis indicated that most of air masses were transported from West and Northwest directions to the sampling location during the observation campaign. Several seriously polluted areas that might affect the air quality of Beijing by long-range transport were identified. Most of air masses were transported from Western and Northwestern China. According to the results of PSCF analysis, Western Shandong, Southern Hebei, Northern Henan, Western Inner Mongolia, Northern Shaanxi, and the whole Shanxi provinces should be the key areas of air pollution control in China. The exposure-response function was used to estimate the health impact associated with PM2.5 pollution. The population affected by PM2.5 during haze episodes reached 0.31 million, the premature death cases associated with PM2.5 reached 2032. These results provided important implication for making environmental policies to improve air quality in China.

Recent developments of electrochemical promotion of catalysis in the techniques of DeNOx.

Electrochemical promotion of catalysis reactions (EPOC) is one of the most significant discoveries in the field of catalytic and environmental protection. The work presented in this paper focuses on the aspects of reaction mechanism, influencing factors, and recent positive results. It has been shown with more than 80 different catalytic systems that the catalytic activity and selectivity of conductive catalysts deposited on solid electrolytes can be altered in the last 30 years. The active ingredient of catalyst can be activated by applying constant voltage or constant current to the catalysts/electrolyte interface. The effect of EPOC can improve greatly the conversion rate of NOx. And it can also improve the lifetime of catalyst by inhibiting its poisoning.

Environmental risk assessment system for phosphogypsum tailing dams.

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.