[Printing Process Quality Control of Bioprinting Medical Devices].

Objective: This study analyzes the risk points in the quality control of bioink and the main processes of bioprinting, clarifies and explores the quality control and supervision model for bioprinting medical devices, and provides theoretical and practical guidance to ensure the safety and effectiveness of bioprinting medical devices. Methods: The quality control risk points throughout the bioprinting process were comprehensively analyzed, with a particular focus on bioprinting materials and key processes. The regulatory model and methods for bioprinting medical devices were examined. This research concentrated on critical technologies such as extrusion, laser-assisted, and in situ bioprinting, assessing their potential for clinical applications and regulatory challenges. Results: Bioink from different sources should meet regulatory requirements. It is essential to ensure aseptic handling of raw materials and to validate sterilization under "worst-case" conditions. Conclusion: As bioprinting technology advances rapidly, corresponding research into materials, processes, and quality risk control should be conducted to ensure the concurrent development of the regulatory system. This will continuously contribute to the orderly progression of the entire industry and human health.

Hyperbranched Poly-L-Lysine-Based Water-Insoluble Complexes as Antibacterial Agents with Efficient Antibacterial Activity And Cytocompatibility.

Despite the advances in technology, bacterial infection associated with biomedical devices is still one of the most challenging issues in clinical practice. Incorporation of antimicrobial agents is regarded as an efficient way to combat medical device associated infectious. However, most of antimicrobial agents have high toxicity to host cells. Thus, fabrication of novel antimicrobial agents that simultaneously fulfill the requirements of antibacterial activity as well as biocompatibility is urgently needed. Herein, a series of water-insoluble antibacterial complexes based on hyperbranched poly-L-lysine (HBPL) and four different surfactants through non-covalent interactions are developed. Such kinds of surfactants have great effects on the antibacterial property of poly(ɛ-caprolactone) (PCL) films that incorporate with the HBPL-based complexes. The results reveal that the PCL films that doped with HBPL/phosphate ester surfactant complexes showed the highest bacterial killing efficiency. Moreover, the cytocompatibility of the composite films is also investigated. Hemolysis experiments indicate that all the films  had low hemolytic activities. Considering the excellent antimicrobial and cytocompatibility properties, this work believes that the optimized complexes have great potential to be used as antimicrobial agents in biomedical field.

Fabrication of Oleophilic Polypeptide Nanoparticle from Complexing of Cross-Linked Epsilon-poly-l-lysine with Docusate Sodium for Preparation of Bactericidal Thermoplastic Polyurethanes.

Thermoplastic polyurethanes (TPUs) are extensively utilized in the biomedical field due to their exceptional mechanical properties and biocompatibility. However, the lack of antibacterial activity limits their application ranges. Nanoscopic particle-based additives with inherent antibacterial characteristics are regarded as promising strategies to prevent biomaterials-associated infection. Herein, a novel polymeric nanoparticle is prepared, which integrates chemically cross-linked epsilon-poly-l-lysine (CPL) and anionic surfactant-docusate sodium (DS). The cross-linked epsilon-poly-l-lysine/docusate sodium (CPL/DS) nanoparticle can be well dispersed in organic solvent and a polymer matrix, which is beneficial to endowing TPUs with synergistic miscibility and antibacterial properties. An antibacterial test showed that the CPL/DS nanoparticles have strong antibacterial activity against S. aureus. Moreover, the results of antibacterial experiments in vitro revealed that almost 100% of S. aureus could be killed by CPL/DS nanoparticle-embedded TPU film with a content of 0.5 wt %. In addition, all of the CPL/DS modified TPU films showed good cytocompatibility in vitro. Consequently, this kind of CPL/DS nanoplatform has great potential to serve as a safe and high-efficient bactericidal agent for endowing biomedical devices with bactericidal property.

A Review of Hand Function Rehabilitation Systems Based on Hand Motion Recognition Devices and Artificial Intelligence.

The incidence of stroke and the burden on health care and society are expected to increase significantly in the coming years, due to the increasing aging of the population. Various sensory, motor, cognitive and psychological disorders may remain in the patient after survival from a stroke. In hemiplegic patients with movement disorders, the impairment of upper limb function, especially hand function, dramatically limits the ability of patients to perform activities of daily living (ADL). Therefore, one of the essential goals of post-stroke rehabilitation is to restore hand function. The recovery of motor function is achieved chiefly through compensatory strategies, such as hand rehabilitation robots, which have been available since the end of the last century. This paper reviews the current research status of hand function rehabilitation devices based on various types of hand motion recognition technologies and analyzes their advantages and disadvantages, reviews the application of artificial intelligence in hand rehabilitation robots, and summarizes the current research limitations and discusses future research directions.

Bio-inspired, bio-degradable adenosine 5'-diphosphate-modified hyaluronic acid coordinated hydrophobic undecanal-modified chitosan for hemostasis and wound healing.

Uncontrolled hemorrhage and wound infection are crucial causes of trauma-associated death in both the military and the clinic. Therefore, developing an efficient and rapid hemostatic method with biocompatibility, easy degradation, and wound healing is of great importance and desirability. Inspired by spontaneous blood cell plug formation in the hemostasis process, an adenosine 5'-diphosphate modified pro-coagulation hyaluronic acid (HA-ADP) coordinated with enhanced antibacterial activity of undecanal-modified chitosan (UCS) was fabricated through physical electrostatic cross-linking and freeze-drying. The as-prepared hydrogel sponges showed a porous structure suitable for blood cell adhesion. In particular, the hydrogel exhibited excellent antibacterial ability and promoted the adhesion of platelets and red blood cells, thus inducing a prominent pro-coagulation ability via platelet activation, which exhibits a shorter hemostasis time (58.94% of control) in vitro. Compared with commercially available CELOX and gelatin sponge (GS), HA-ADP/UCS accelerates hemostasis and reduces blood loss in both rat tail amputation and rat artery injury models. Furthermore, all the samples exhibited superior cytocompatibility and biodegradability. Due to these performances, HA-ADP/UCS promoted full-thickness skin defect healing significantly in vivo. All the properties of HA-ADP/UCS suggest that it has great potential for translation as a clinical application material for hemostatic and wound healing.

Polydopamine-coated UiO-66 nanoparticles loaded with perfluorotributylamine/tirapazamine for hypoxia-activated osteosarcoma therapy.

BACKGROUND: Hypoxia is a characteristic of solid tumors that can lead to tumor angiogenesis and early metastasis, and addressing hypoxia presents tremendous challenges. In this work, a nanomedicine based on oxygen-absorbing perfluorotributylamine (PFA) and the bioreductive prodrug tirapazamine (TPZ) was prepared by using a polydopamine (PDA)-coated UiO-66 metal organic framework (MOF) as the drug carrier. RESULTS: The results showed that TPZ/PFA@UiO-66@PDA nanoparticles significantly enhanced hypoxia, induced cell apoptosis in vitro through the oxygen-dependent HIF-1α pathway and decreased oxygen levels in vivo after intratumoral injection. In addition, our study demonstrated that TPZ/PFA@UiO-66@PDA nanoparticles can accumulate in the tumor region after tail vein injection and effectively inhibit tumor growth when combined with photothermal therapy (PTT). TPZ/PFA@UiO-66@PDA nanoparticles increased HIF-1α expression while did not promote the expression of CD31 in vivo during the experiment. CONCLUSIONS: By using TPZ and PFA and the enhanced permeability and retention effect of nanoparticles, TPZ/PFA@UiO-66@PDA can target tumor tissues, enhance hypoxia in the tumor microenvironment, and activate TPZ. Combined with PTT, the growth of osteosarcoma xenografts can be effectively inhibited.

Controllable fabrication of hydroxybutyl chitosan/oxidized chondroitin sulfate hydrogels by 3D bioprinting technique for cartilage tissue engineering.

Biological regeneration of articular cartilage continues to be a challenge at present. Functional engineered implants with patient-specific sizes are difficult to achieve. The aim of this study is to fabricate a biocompatible cell-laden hydrogel with a designable structure. Covalent hydrogels were prepared with water soluble hydroxybutyl chitosan (HBC) and oxidized chondroitin sulfate (OCS) via a Schiff-base reaction. With the aid of three-dimensional (3D) bioprinted sacrificial molds, HBC/OCS hydrogel with various structures were obtained. After the material constituent optimization process, an injectable hydrogel with a uniform porous structure of 100 µm average pore size was developed to form macroporous hydrogel. In vitro and in vivo biocompatibility of optimized HBC/OCS hydrogel were also carefully assessed. The results indicated that human adipose-derived mesenchymal stem cells could be 3D cultured in HBC/OCS hydrogel maintaining good viability. Moreover, the hydrogels were found to trigger the least amount of pro-inflammatory gene expression of macrophage and to inhibit acute immune responses in 7 d. These results demonstrate the potential of HBC/OCS hydrogels as a cell delivery system for cartilage tissue engineering.

Changes in fibrinopeptide A peptides in the sera of rats chronically exposed to low doses of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD).

2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) is a ubiquitously distributed endocrine disruptors. To investigate peptide changes in the sera of rats chronically exposed to TCDD and to explore the association of these changes with liver morphology, TCDD was administrated to male rats at doses of 140, 350, and 875 ng/kg/week for 29 weeks. Serum was collected and proteomic analysis was performed using automated Bruker Daltonics ClinProt with matrix-assisted laser desorption/ionization time-of-flight mass spectrometer. One peptide at 1740.89 was found to be significantly decreased and further identified with nano LC-MS/MS system. The MS BLAST homology search engine reported the peptide to be a partial sequence of fibrinopeptide A. Liver fatty degeneration and necrosis were assessed by hematoxylin and eosin staining. Liver fatty degeneration and necrosis were both found to be significantly increased after TCDD exposure. Levels of fibrinopeptide A were significantly correlated with liver fatty degeneration and necrosis.

[The relationship between occupational stress and metabolic syndrome among policemen].

OBJECTIVE: To explore the occupational stress factors associated with the prevalence of metabolic syndrome (MS) among male policemen. METHODS: Using cluster sampling method, we selected four Public Security Bureau within the jurisdiction of the station now in some city. All the male police were included as research objects, and finally 1490 persons were selected, health and occupational stress inventory-revised (OSI-R) questionnaire were used for epidemiological surveys, and anthropometric examination and chemical indicators were also measured at the same time. The analysis methods were chi-square test and unconditional logistical regression. RESULTS: Among the 1490 of research objects, 1483 completed the questionnaire, and 1480 of the eligible questionnaires were available.237 cases were MS, and the prevalence rate was 16.0%(237/1480). The number of cases who were high, moderate and lack of occupational stress in MS group were 8, 39 and 23, that in non-MS were 14, 114 and 131, respectively. The odds of occupational stress with the highest and medium among policemen than who were lack were 4.82 (95%CI: 1.50 - 15.41) and 3.33 (95%CI: 1.62 - 6.79); the average score of role ambiguity, role insufficiency and responsibility in the group of MS were (38.76 ± 6.83), (25.74 ± 7.22), (25.76 ± 6.27); and that in non-MS were (37.55 ± 6.85), (24.50 ± 6.58), (25.05 ± 5.95). The logistical regression analysis showed that: the likely three occupational risk stress factors which influencing the prevalence of MS were role ambiguity, role insufficiency and responsibility, and the OR (95%CI) were 1.06 (1.02 - 1.10), 1.04 (1.02 - 1.07) and 1.03 (1.01 - 1.06), respectively. CONCLUSION: Role ambiguity, role insufficiency and responsibility were the occupational risk stress factors associated with the prevalence of MS among male policemen.