Minimally Invasive Delivery of Percutaneous Ablation Agent via Magnetic Colloidal Hydrogel Injection for Treatment of Hepatocellular Carcinoma.

Percutaneous thermotherapy, a minimally invasive operational procedure, is employed in the ablation of deep tumor lesions by means of target-delivering heat. Conventional thermal ablation methods, such as radiofrequency or microwave ablation, to a certain extent, are subjected to extended ablation time as well as biosafety risks of unwanted overheating. Given its effectiveness and safety, percutaneous thermotherapy gains a fresh perspective, thanks to magnetic hyperthermia. In this respect, an injectable- and magnetic-hydrogel-construct-based thermal ablation agent is likely to be a candidate for the aforementioned clinical translation. Adopting a simple and environment-friendly strategy, a magnetic colloidal hydrogel injection is introduced by a binary system comprising super-paramagnetic Fe3O4 nanoparticles and gelatin nanoparticles. The colloidal hydrogel constructs, unlike conventional bulk hydrogel, can be easily extruded through a percutaneous needle and then self-heal in a reversible manner owing to the unique electrostatic cross-linking. The introduction of magnetic building blocks is exhibited with a rapid magnetothermal response to an alternating magnetic field. Such hydrogel injection is capable of generating heat without limitation of deep penetration. The materials achieve outstanding therapeutic results in mouse and rabbit models. These findings constitute a new class of locoregional interventional thermal therapies with minimal collateral damages.

SiO2@AuAg/PDA hybrid nanospheres with photo-thermally enhanced synergistic antibacterial and catalytic activity.

Wastewater discharged from industrial, agricultural and livestock production contains a large number of harmful bacteria and organic pollutants, which usually cause serious harm to human health. Therefore, it is urgent to find a "one-stone-two-birds" strategy with good antimicrobial and pollutant degradation activity for treating waste water. In this paper, SiO2@AuAg/Polydopamine (SiO2@AuAg/PDA) core/shell nanospheres, which possessed synergistic "Ag+-release-photothermal" antibacterial and catalytic behaviors, have been successfully prepared via a simple in situ redox polymerization method. The SiO2@AuAg/PDA nanospheres showed good catalytic activity in reducing 4-nitrophenol to 4-aminophenol (0.576 min-1 mg-1). Since the AuAg nanoclusters contain both gold and silver elements, they provided a high photothermal conversion efficiency (48.1%). Under NIR irradiation (808 nm, 2.5 W-2), the catalytic kinetics were improved by 2.2 times. Besides the intrinsic Ag+-release, the photothermal behavior originating from the AuAg bimetallic nanoclusters and the PDA component of SiO2@AuAg/PDA also critically improved the antibacterial performance. Both E. coli and S. aureus could be basically killed by SiO2@AuAg/PDA nanospheres at a concentration of 90 µg mL-1 under NIR irradiation. This "Ag+-release-photothermal" coupled sterilization offers a straightforward and effective approach to antimicrobial therapy, and further exhibits high potential in nanomedicine for combating bacterial contamination in environmental treatment and biological fields.

Nanosphere Chain Model of Magnetic Fluid and Its Dynamic Performance.

The magnetorheological effect is a critically important mechanical property of magnetic fluids. Accurately capturing the macroscopic properties of magnetorheological fluids with elongated particle forms, such as nanosphere chains, remains a challenging task, particularly due to the complexities arising from particle asymmetry. Traditional particle dynamics primarily utilize spherical particles as computational units, but this approach can lead to significant inaccuracies, especially when analyzing nonspherical magnetorheological fluids, due to the neglect of particle asymmetry. In this work, an advanced particle dynamics model has been developed by integrating the rotation and collision of these asymmetric particles, specifically tailored for the configuration of nanosphere chains. This model exhibits a significant reduction in error by a factor of 3.883, compared to conventional particle models. The results demonstrate that alterations in the geometric characteristics of magnetic nanosphere chains can cause changes in mesoscopic structures and magnetic potential energy, thereby influencing the mechanical properties at the macroscopic level. This work has developed an accurate mesoscopic simulation method for calculating chain-type magnetorheological fluids, establishing a connection between mesoscopic structures and macroscopic properties, and unveiling the tremendous potential for accelerating the design of next-generation magnetic fluids using this approach.

Size-dependent magnetomechanically enhanced photothermal antibacterial effect of Fe3O4@Au/PDA nanodurian.

The global health crisis of bacterial resistance to antibiotics requires innovative antibacterial strategies. One promising solution is the exploitation of multifunctional nanoplatforms based on non-resistant antibacterial mechanisms. This work reports a novel Fe3O4@Au/polydopamine (PDA) nanodurian with excellent photothermal-magnetomechanic synergistic antibacterial effects. The one-step formed Au/PDA hybrid shell provides good photothermal properties and spiky surfaces for enhanced magnetomechanic effects. Upon near-infrared (NIR) irradiation, the Fe3O4@Au/PDA nanodurian (200 µg mL-1) achieved nearly 100% antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The efficiency of photothermal antimicrobial activity was further enhanced by the application of a rotating magnetic field (RMF), with the sterilization efficiency being increased by up to more than a half compared to the action alone. Interestingly, the size of the nanodurian has a significant impact on the synergistic sterilization effect, with larger particles showing a superior performance due to stronger chain-like structures in the magnetic field. Finally, the Fe3O4@Au/PDA nanodurian also demonstrates effective biofilm removal, with larger particles exhibiting the best eradication effect under the photothermal-magnetomechanic treatment. Overall, this magnetic field enhanced photothermal antibacterial strategy provides a promising broad-spectrum antimicrobial solution to combat bacterial infections. Thus, it possesses great potential in future nanomedicine and pollution treatment.

A MXene@AgAu@PDA nanoplatform loaded with AgAu nanocages for enhancing catalytic activity and antibacterial performance.

With the rapid development of social industrialization, environmental problems seriously threaten people's health, especially water pollution. Therefore, there is an urgent need to construct a multifunctional nanoplatform for different scenarios. Two-dimensional MXene@AgAu@PDA nanosheets loaded with AgAu bimetallic nanocages have been prepared by a one-step method. First, the in situ generated MXene@Ag is used as an auxiliary template, and then HAuCl4 and dopamine are added for in situ redox-oxidizing polymerization reactions to obtain AgAu catalytic nanocages and the protective polydopamine (PDA) layer which can improve the stability and biocompatibility. MXene and PDA have excellent photothermal conversion ability while hollow AgAu nanocages have strong absorption in the near-infrared region and a local surface plasmonic resonance effect. In comparison to the catalytic reaction rates under dark and room temperature conditions, the catalytic kinetic rate of MXene@AgAu@PDA nanosheets under near-infrared irradiation increases from 0.13 to 0.69 min-1 mg-1. Density functional theory (DFT) is used to study the electron transfer behavior between AgAu nanocages and MXene nanosheets, and the mechanism of the enhanced catalytic reaction rate is analyzed. Besides, due to its Ag ions and photothermal coupling antibacterial properties, 40 µg mL-1 MXene@AgAu@PDA nanosheets inactivates nearly all E. coli and S. aureus after irradiation with near-infrared light for 6 min.

Triple-Responsive Soft Actuator with Plastically Retentive Deformation and Magnetically Programmable Recovery.

Multistimuli responsiveness and programmable shape recovery are crucial for soft actuators in soft robotics, electronics, and wearables. However, existing strategies for actuation cannot attain power-free shape retention after removing the external energy supply. Here, a self-assembled density deposition method was developed to fabricate an electrothermal-NIR-magnetic triple-response actuator which was composed of cellulose nanofiber/poly(vinyl alcohol)/liquid metal (CNF/PVA/LM) and magnetic polydimethylsiloxane (MPDMS) layer. Interestingly, the large deformation can be controllably fixed and the temporary configuration will be programmable recovered under a magnetic field due to the thermal-plastic transferring behavior of the CNF/PVA/LM. Rolling robot prepared based on soft actuators exhibits good ability to avoid obstacles. In addition, the object handling and programmable release capabilities of the carrier robots demonstrate that this actuation approach will contribute to a better understanding of how to more rationally utilize various stimuli for application purposes.

Wearable Safeguarding Leather Composite with Excellent Sensing, Thermal Management, and Electromagnetic Interference Shielding.

This work illustrates a "soft-toughness" coupling design method to integrate the shear stiffening gel (SSG), natural leather, and nonwoven fabrics (NWF) for preparing leather/MXene/SSG/NWF (LMSN) composite with high anti-impact protecting, piezoresistive sensing, electromagnetic interference (EMI) shielding, and human thermal management performance. Owing to the porous fiber structure of the leather, the MXene nanosheets can penetrate leather to construct a stable 3D conductive network; thus both the LM and LMSN composites exhibit superior conductivity, high Joule heating temperature, and an efficient EMI shielding effectiveness. Due to the excellent energy absorption of the SSG, the LMSN composites possess a huge force-buffering (about 65.5%), superior energy dissipation (above 50%), and a high limit penetration velocity of 91 m s-1 , showing extraordinary anti-impact performance. Interestingly, LMSN composites possess an unconventional opposite sensing behavior to piezoresistive sensing (resistance reduction) and impact stimulation (resistance growing), thus they can distinguish the low and high energy stimulus. Ultimately, a soft protective vest with thermal management and impact monitoring performance is further fabricated, and it shows a typical wireless impact-sensing performance. This method is expected to have broad application potential in the next-generation wearable electronic devices for human safeguarding.

NIR-induced improvement of catalytic activity and antibacterial performance over AuAg nanorods in Rambutan-like Fe3O4@AgAu@PDA magnetic nanospheres.

Pathogenic bacteria and difficult-to-degrade pollutants in water have been serious problems that always plague people. Therefore, finding a "one stone-two birds" method that can quickly catalyze the degradation of pollutants and show effective antibacterial behavior become an urgent requirement. This work reports a facile one-step strategy for fabricating a Rambutan-like Fe3O4@AgAu@PDA (Fe3O4@AgAu@Polydopamine) core/shell nanosphere with both catalytic and antibacterial activities which can be critically improved by externally applying an NIR laser irradiation (NIR, 808 nm) and a rotating magnetic field. Typically, the Rambutan-like Fe3O4@AgAu@PDA nanosphere have a rather rough surface due to the AuAg bimetallic nanorods sandwiched between the Fe3O4 core and the PDA shell. Owing to the penetrated PDA shell, AgAu nanorods show high and magnetically recyclable photothermal-enhanced catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol and they can also be applied to initiate TMB oxidation under the help of NIR heating condition. Moreover, Fe3O4@AgAu@PDA shows a moderate antibacterial activity due to the weak release of Ag+. Under applying a rotating external magnetic field, the rough-surface Fe3O4@AgAu@PDA nanospheres produce a controllable magnetolytic force on the bacterial due to their good affinity. As a result, the Fe3O4@AgAu@PDA nanospheres show a "magnetolytic-photothermal-Ag+" synergistic antibacterial behavior against E. coli and S. aureus.

Ultra-Stretchable Spiral Hybrid Conductive Fiber with 500%-Strain Electric Stability and Deformation-Independent Linear Temperature Response.

Stretchable configuration occupies priority in devising flexible conductors used in intelligent electronics and implantable sensors. While most conductive configurations cannot suppress electrical variations against extreme deformation and ignore inherent material characteristics. Herein, a spiral hybrid conductive fiber (SHCF) composed of aramid polymeric matrix and silver nanowires (AgNWs) coating is fabricated through shaping and dipping processes. The homochiral coiled configuration mimicked by plant tendrils not only enables its high elongation (958%), but also generates a superior deformation-insensitive effect to existing stretchable conductors. The resistance of SHCF maintains remarkable stability against extreme strain (500%), impact damage, air exposure (90 days), and cyclic bending (150 000 times). Moreover, the thermal-induced densification of AgNWs on SHCF achieves precise and linear temperature response toward a broad range (-20 to 100 °C). Its sensitivity further manifests high independence to tensile strain (0%-500%), allowing for flexible temperature monitoring of curved objects. Such unique strain-tolerant electrical stability and thermosensation hold broad prospects for SHCF in lossless power transferring and expeditious thermal analysis.

AgPd nanocages sandwiched between a MXene nanosheet and PDA layer for photothermally improved catalytic activity and antibacterial properties.

In this work, a MXene@AgPd/polydopamine (PDA) nanosheet with excellent photothermal conversion efficiency was successfully synthesized by a simple redox-oxidative polymerization method. Interestingly, AgPd bimetallic nanocrystals sandwiched between a MXene nanosheet and PDA layer have cage-like nanostructure, which is favorable for high catalytic efficiency and antibacterial performance. Importantly, the MXene@AgPd/PDA nanosheet exhibits good catalytic activity for the reduction of 4-nitrophenol (1.2 min-1 mg-1) and the catalytic dynamics can be improved by about 1.2 times under NIR (near-infrared light, 808 nm, and 2.5 W cm-2) irradiation. As the PDA shell is well protected, the MXene@AgPd/PDA nanosheet retained more than 90% catalytic activity after 6 cycles. In addition, due to the presence of the Ag component, the MXene@AgPd/PDA nanosheet exhibited good antibacterial activity against both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Under near-infrared light irradiation, its antibacterial activity was further enhanced due to the NIR photothermal effect.

Flexible and Stretchable Elastomer Composites Based on Lightweight Liquid Metal Foam Spheres with Pod-like Contacts.

Liquid metal (LM) is increasingly employed as a conductive filler in soft and flexible elastomer composites owing to its favorable conductivity and liquid fluidity. However, the high density of LM inevitably increases the weight of composites, which brings limitations in large-area and weight-sensitive applications. This work reports a flexible and stretchable elastomer composite composed of pod-like contacting lightweight LM foam spheres and polydimethylsiloxane matrix (LMS/PDMS). The lightweight LMS reduces the amount of LM used in the preparation process while imparting good electrical conductivity and deformability to the composite. The different contact modes of LMS endow the final composites with diverse strain sensitivity. The mechanism of interfacial contact conduction between the LMS with different melting points has been systematically studied, and the result shows that the liquid-solid contact mode of LMS further improves the strain sensitivity of the composite. Moreover, the composite also has satisfactory electrothermal properties and the temperature can quickly reach 70 °C within 30 s, showing good applicability in electric heating. Finally, the composites containing LMS with different contact modes can be developed as multifunctional sensors to detect human activities, temperature variation, and even underwater vibration, demonstrating the great potential in next-generation sensors and electronics.

Nacre-Mimetic Hierarchical Architecture in Polyborosiloxane Composites for Synergistically Enhanced Impact Resistance and Ultra-Efficient Electromagnetic Interference Shielding.

Pervasive mechanical impact is growing requirement for advanced high-performance protective materials, while the electromagnetic interference (EMI) confers severe risk to human health and equipment operation. Bioinspired structural composites achieving outstanding safeguards against a single threat have been developed, whereas the synergistic implementation of impact/EMI coupling protection remains a challenge. This work proposes the concept of nacre-mimetic hierarchical composite duplicating the "brick-and-mortar" arrangement, which consists of freeze-drying constructed chitosan/MXene lamellar architecture skeleton embedded in a shear stiffening polyborosiloxane matrix. The resulting composite effectively attenuates the impact force of 85.9%-92.8% with extraordinary energy dissipation capacity, in the coordinative manner of strain-rate enhancement, structural densification, lamella dislocation and crack propagation. Attributed to the alternate laminated structure promoting the reflection loss of electromagnetic waves, it demonstrates an ultraefficient EMI shielding effectiveness of 47.2-71.8 dB within extremely low MXene loadings of 1.1-1.3 wt %. Furthermore, it serves favorably in impact monitoring and wireless alarm systems and accomplishes performance optimization through the combination of multiple biomimetic strategies. In conclusion, this function-integrated structural composite is shown to be a competitive candidate for sophisticated environments by resisting impact damage and EMI hazards.

Injectable magnetic montmorillonite colloidal gel for the postoperative treatment of hepatocellular carcinoma.

Bioactive materials have been extensively developed for the adjuvant therapy of cancer. However, few materials can meet the requirements for the postoperative resection of hepatocellular carcinoma (HCC) due to massive bleeding and high recurrence. In particular, combination therapy for HCC has been highly recommended in clinical practice, including surgical resection, interventional therapy, ablation therapy and chemotherapy. Herein, an injectable magnetic colloidal gel (MCG) was developed by controllable electrostatic attraction between clinically available magnetic montmorillonites and amphoteric gelatin nanoparticles. The optimized MCG exhibited an effective magnetic heating effect, remarkable rheological properties, and high gel network stability, realizing the synergistic treatment of postoperative HCC by stimuli-responsive drug delivery, hemostasis and magnetic hyperthermia. Furthermore, a minimal invasive MCG-induced interventional magnetic hyperthermia therapy (MHT) under ultrasound guidance was realized on hepatic tumor rabbits, providing an alternative therapeutics to treat the postoperative recurrence. Overall, MCG is a clinically available injectable formulation for adjuvant therapy after HCC surgical resection.

High-Performance Liquid Metal/Polyborosiloxane Elastomer toward Thermally Conductive Applications.

With the combination of high flexibility and thermal property, thermally conductive elastomers have played an important role in daily life. However, traditional thermally conductive elastomers display limited stretchability and toughness, seriously restricting their further development in practical applications. Herein, a high-performance composite is fabricated by dispersing room-temperature liquid metal microdroplets (LM) into a polyborosiloxane elastomer (PBSE). Due to the unique solid-liquid coupling mechanism, the LM can deform with the PBSE matrix, achieving higher fracture strain (401%) and fracture toughness (2164 J/m2). Meanwhile, the existence of LM microdroplets improves the thermal conductivity of the composite. Interestingly, the LM/PBSE also exhibits remarkable anti-impact, adhesion capacities under complex loading environments. As a novel stretchable elastomer with enhanced mechanical and thermal behavior, the LM/PBSE shows good application prospects in the fields of thermal camouflages, stretchable heat-dissipation matrixes, and multifunctional shells for electronic devices.

In situ Thermal-Responsive Magnetic Hydrogel for Multidisciplinary Therapy of Hepatocellular Carcinoma.

Current surgical single modality treatments for hepatocellular carcinoma (HCC) were restricted by recurrence, blood loss, significant trauma, and poor prognostic. Although multidisciplinary strategies for HCC treatment have been highly recommended by the clinical guidelines, there was limited choice of materials and treatments. Herein, we reported an in situ formed magnetic hydrogel with promising bioapplicable thermal-responsiveness, strong adhesion in wet conditions, high magnetic hyperthermia, and biocompatibility, leading to efficient HCC multidisciplinary treatment including postoperative treatment and transarterial embolization therapy. In vivo results indicated that this hydrogel could reduce the postoperative recurrence rate. The hemostatic ability of the thermal-responsive hydrogel was further demonstrated in both the liver scratch model and liver tumor resection. Computed tomography imaging suggested that the hydrogel could completely embolize the arterial vessels of rabbit liver tumor by vascular intervention operation, which could serve as multidisciplinary responsive materials to external magnetic field and body temperature for HCC treatment.

3D Printing Ultraflexible Magnetic Actuators via Screw Extrusion Method.

Soft magnetic actuators with programmable structure design and controllable deformation ability based on 3D printing technology have attracted extensive attention. In this paper, a novel 3D printing strategy is developed to manufacture the ultraflexible magnetic actuator, in which the printed material is composed of magnetic particles and thermoplastic rubber materials. Different from the traditional fused deposition printing, this printing strategy introduces screw extrusion technology to the heating components of the printer to overcome the problem of filament buckling in the flexible material. Thus, the tensile modulus of the printed products can be reduced to as low as ≈2 MPa. Based on the above method, biomimetic magnetic actuators of the sucker and the pump are constructed for adhering and releasing object and pumping liquid. The contraction performance of the magnetic actuator is studied via a series of experiments and the magnetic field-induced deformation is analyzed by the multiphysics-based finite element model. This work proves that ultraflexible magnetic actuators fabricated by this 3D printing strategy show broad prospects in the fields of soft robotics and bionics.

Stretchable and Recyclable Liquid Metal Droplets Embedded Elastomer Composite with High Mechanically Sensitive Conductivity.

Liquid metal (LM)-based elastomers have received growing interest for a wide range of applications such as soft robotics and flexible electronics. This work reports a stretchable and bendable liquid metal droplets embedded elastomer (LMDE) composite, which consists of liquid metal droplets (LMDs) filler and carbonyl iron particles (CIPs)/polydimethylsiloxane (PDMS) hybrid matrix. The reversible switching of the composite from an insulator to a conductor can be realized through the contact and noncontact process between the LMDs. The mechanism of constructing the controllable conductive path between the droplets under external deformations has been systematically studied, and this result also provides a basis model for analyzing the conductive networks in traditional LM-based flexible composites. The composites exhibit stable mechanical and electrical performance under different tensile strains and bending angles. Moreover, the fluidic nature of LM endows the composite with good electrically healing capability. The valuable LM can be easily recycled at a high recovery rate of 98%. Finally, the composite can be developed as a sensor for the detection of both compressive force and magnetic field, demonstrating a broad promising in flexible electronics, actuators, and wearable devices.

Plasma Treatment for Cellulose in Tobacco Paper-Base: The Improvement of Surface Hydrophilicity and Mechanical Property.

This paper reports a plasma treatment (PT) method for improving the surface hydrophilicity and mechanical properties of cellulose in reconstituted tobacco paper-base. The absorption and infiltration rates of water droplets on PT-reconstituted tobacco paper-base-15 s were significantly accelerated. Notably, the increased content of methylene and alkyl groups enabled the tobacco paper-base to absorb more useful substrates in the tobacco extract after plasma treatment. In addition, the tensile mechanical performance of reconstituted tobacco was significantly improved after plasma treatment, which indicated that the content of organic matter absorbed by the tobacco paper-base sheet was increased. Moreover, tobacco extract infiltrated on the surface of PT-reconstituted tobacco paper-base reached 37.7° within 30 s, while it reached 79.9° on the reconstituted tobacco paper-base. Finally, the mechanism by which the surface hydrophilicity and mechanical properties of the cellulose in the tobacco paper-base were improved is discussed.

Magnetic-Field-Induced Improvement of Photothermal Sterilization Performance by Fe3O4@SiO2@Au/PDA Nanochains.

Due to the abuse of antibiotics, the sensitivity of patients to antibiotics is gradually reduced. This work develops a Fe3O4@SiO2@Au/PDA nanochain which shows an interesting magnetic-field-induced improvement of its photothermal antibacterial property. First, SiO2 was wrapped on Fe3O4 nanospheres assembled in a chain to form a Fe3O4@SiO2 nanocomposite with a chain-like nanostructure. Then, the magnetic Fe3O4@SiO2@Au/PDA nanochains were prepared using in situ redox-oxidization polymerization. Under the irradiation of an 808 nm NIR laser, the temperature rise of the Fe3O4@SiO2@Au/PDA nanochain dispersion was obvious, indicating that they possessed a good photothermal effect. Originating from the Fe3O4, the Fe3O4@SiO2@Au/PDA nanochain showed a typical soft magnetic behavior. Both the NIR and magnetic field affected the antimicrobial performance of the Fe3O4@SiO2@Au/PDA nanochains. Escherichia coli and Staphylococcus aureus were used as models to verify the antibacterial properties. The experimental results showed that the Fe3O4@SiO2@Au/PDA nanochains exhibited good antibacterial properties under photothermal conditions. After applying a magnetic field, the bactericidal effect was further significantly enhanced. The above results show that the material has a broad application prospect in inhibiting the growth of bacteria.

Near-infrared light-responsive photothermal α-Fe2O3@Au/PDA core/shell nanostructure with on-off controllable anti-bacterial effects.

Antimicrobial materials are expected to be alternatives for antibiotics against multidrug-resistant bacteria. In this paper, non-spherical α-Fe2O3@Au/PDA core/shell nanoparticles with tunable shapes are synthesized by a one-step in situ oxidation-redox polymerization method toward near infrared light-responsive antibacterial therapy. The thickness and composition of the Au/PDA hybrid shell can be controlled by varying the concentration of HAuCl4 and the dopamine precursor. Owing to the wonderful photothermal characteristics originating from the Au/PDA shell, the spindle α-Fe2O3@Au/PDA core shell nanoparticles exhibit excellent photothermal sterilization effects against both Escherichia coli and Staphylococcus aureus at low concentrations. Meanwhile, the NIR photothermal induced bactericidal performance indicates that α-Fe2O3@Au/PDA hybrid particles with tunable non-spherical shapes possess unique controllable antibacterial effects. As a result, this finding provides a simple strategy for fabricating high performance photothermal antibacterial agents and the final products possess high potential in synergistic antimicrobial therapy.