Drug Crystal Precipitation in Biorelevant Bicarbonate Buffer: A Well-Controlled Comparative Study with Phosphate Buffer.

The purpose of the present study was to clarify whether the precipitation profile of a drug in bicarbonate buffer (BCB) may differ from that in phosphate buffer (PPB) by a well-controlled comparative study. The precipitation profiles of structurally diverse poorly soluble drugs in BCB and PPB were evaluated by a pH-shift precipitation test or a solvent-shift precipitation test (seven weak acid drugs (pKa: 4.2 to 7.5), six weak base drugs (pKa: 4.8 to 8.4), one unionizable drug, and one zwitterionic drug). To focus on crystal precipitation processes, each ionizable drug was first completely dissolved in an HCl (pH 3.0) or NaOH (pH 11.0) aqueous solution (450 mL, 50 rpm, 37 °C). A 10-fold concentrated buffer solution (50 mL) was then added to shift the pH value to 6.5 to initiate precipitation (final volume: 500 mL, buffer capacity (ß): 4.4 mM/ΔpH (BCB: 10 mM or PPB: 8 mM), ionic strength (I): 0.14 M (adjusted by NaCl)). The pH, ß, and I values were set to be relevant to the physiology of the small intestine. For an unionizable drug, a solvent-shift method was used (1/100 dilution). To maintain the pH value of BCB, a floating lid was used to avoid the loss of CO2. The floating lid was applied also to PPB to precisely align the experimental conditions between BCB and PPB. The solid form of the precipitants was identified by powder X-ray diffraction and differential scanning microscopy. The precipitation of weak acids (pKa ≤ 5.1) and weak bases (pKa ≥ 7.3) was found to be slower in BCB than in PPB. In contrast, the precipitation profiles in BCB and PPB were similar for less ionizable or nonionizable drugs at pH 6.5. The final pH values of the bulk phase were pH 6.5 ± 0.1 after the precipitation tests in all cases. All precipitates were in their respective free forms. The precipitation of ionizable weak acids and bases was slower in BCB than in PPB. The surface pH of precipitating particles may have differed between BCB and PPB due to the slow hydration process of CO2 specific to BCB. Since BCB is a physiological buffer in the small intestine, it should be considered as an option for precipitation studies of ionizable weak acids and bases.

Dissolution Profiles of Immediate Release Products of Various Drugs in Biorelevant Bicarbonate Buffer: Comparison with Compendial Phosphate Buffer.

PURPOSE: The purpose of this study was to clarify the extent to which the dissolution profiles of immediate release (IR) products of various drugs differ between biorelevant bicarbonate buffer (BCB) and compendial phosphate buffer (PPB). METHODS: The dissolution profiles of the IR products of fifteen poorly soluble ionizable drugs were measured in BCB and PPB. BCB was set to be relevant to the small intestine (pH 6.8, 10 mM). The pH was maintained using the floating lid method. The Japanese pharmacopeia second fluid (JP2, 25 mM phosphate buffer, nominal pH 6.8) was used as compendial PPB. The compendial paddle apparatus was used for the dissolution tests (500 mL, 50 rpm, 37°C). RESULTS: In 11/15 cases, a difference in dissolved% (< 0.8 or > 1.25-fold) was observed at a time point. In 4/15 cases, the ratio of the area under the dissolution curve was not equivalent (< 0.8 or > 1.25-fold). In the cases of free-form drugs, the dissolution rate tended to be slower in BCB than in JP2. In the case of salt-form drugs, a marked difference was observed for the cases that showed supersaturation. However, no trend was observed in the differences. CONCLUSIONS: Many IR products showed differences in the dissolution profiles between biorelevant BCB and compendial PPB. With the floating lid method, BCB is as simple and easy to use as PPB. Biorelevant BCB is recommended for dissolution testing.

Application of Population Balance Model to Simulate Precipitation of Weak Base and Zwitterionic Drugs in Gastrointestinal pH Environment.

The purpose of the present study was to evaluate whether the population balance model (PBM) could be a suitable model for the precipitation of weak base and zwitterionic drugs in the gastrointestinal pH environment. Five poorly soluble drugs were used as model drugs (dipyridamole, haloperidol, papaverine, phenazopyridine, and tosufloxacin). PBM consists of the equations for primary nucleation, secondary nucleation, and particle growth. Each equation has two empirical parameters. The pH shift (pH-dumping) precipitation test (pH 3.0 to 6.5) was used to determine the model parameters for each drug. It was difficult to determine all six parameters by simultaneously fitting them to the precipitation profiles. Therefore, the number of model parameters was reduced from six to three by neglecting the secondary nucleation process and applying a common exponent number for the particle growth equation. Despite reducing the parameter number, PBM appropriately described the precipitation profiles in the pH shift tests. The constructed PBM model was then used to predict the precipitation profiles in an artificial stomach-intestine transfer (ASIT) test. PBM appropriately predicted the precipitation profiles in the ASIT test. These results suggested that PBM can be a suitable model to represent the precipitation of weak base and zwitterionic drugs in the gastrointestinal pH environment for biopharmaceutics modeling and simulation.

Dissolution Profiles of Carbamazepine Cocrystals with Cis-Trans Isomeric Coformers.

PURPOSE: The purpose of the present study was to investigate the dissolution profiles of cocrystals with cis-trans isomeric coformers. Previously, the carbamazepine (CBZ) cocrystals with even-carbon dicarboxylic acids showed higher supersaturation than those with odd-carbon ones, attributed to particle surface solution-mediated phase transformation (PS-SMPT) to CBZ dihydrate (CBZ DH). However, it has been unknown whether this odd-even pattern holds for cis-trans isomeric coformers. METHOD: CBZ cocrystals with maleic acid (MLE) and fumaric acid (FUM) (CBZ-FUM anhydrate (CBZ-FUM AH) and monohydrate (CBZ-FUM H2O)) were employed as model cocrystals. Hydroxypropyl　methylcellulose (HPMC), polyvinylpyrrolidone, and polyethylene glycol 6000 (PEG) were used as precipitation inhibitors. Dissolution tests were performed under a non-sink condition. Residual particles were analyzed by powder X-ray diffraction, differential scanning calorimetry, polarized light microscope, and scanning electron microscope. RESULTS: All cocrystals showed little supersaturation in the absence of a polymer. In 0.1% HPMC, CBZ-FUM AH showed significant supersaturation, whereas CBZ-MLE and CBZ-FUM H2O did not for the first two hours. HPMC reduced the initial dissolution rate of CBZ-MLE and CBZ-FUM H2O while inducing the highest supersaturation among the polymers after 96 h. The particle surface changed from a smooth plane to a striped pattern, but little or no CBZ DH was detected. CONCLUSION: The cocrystals with cis-trans isomeric coformers showed different dissolution profiles. HPMC increased the dissolution rate of CBZ-FUM AH by inhibiting PS-SMPT but reduced the dissolution rate of CBZ-MLE and CBZ-FUM H2O without inducing PS-SMPT. The striped pattern was suggested to be due to surface etching rather than PS-SMPT.

Chronology of embryonic and gonadal development in the Reeves' turtle, Mauremys reevesii.

Temperature-dependent sex determination (TSD) is a mechanism in which environmental temperature, rather than innate zygotic genotype, determines the fate of sexual differentiation during embryonic development. Reeves' turtle (also known as the Chinese three-keeled pond turtle, Mauremys reevesii) exhibits TSD and is the only species whose genome has been determined in Geoemydidae to date. Thus, M. reevesii occupy phylogenetically important position for the study of TSD and can be compared to other TSD species to elucidate the underlying molecular mechanism of this process. Nevertheless, neither embryogenesis nor gonadogenesis has been described in this species. Therefore, herein, we investigated the chronology of normal embryonic development and gonadal structures in M. reevesii under both female- and male-producing incubation temperatures (FPT 31 °C or MPT 26 °C, respectively). External morphology remains indistinct between the two temperature regimes throughout the studied embryonic stages. However, the gonadal ridges present on the mesonephros at stage 16 develop and sexually differentiate at FPT and MPT. Ovarian and testicular structures begin to develop at stages 18-19 at FPT and stages 20-21 at MPT, respectively, and thus, the sexual differentiation of gonadal structures began earlier in the embryos at FPT than at MPT. Our results suggest that temperature sensitive period, at which the gonadal structures remain sexually undifferentiated, spans from stage 16 (or earlier) to stages 18-19 at FPT and to stages 20-21 at MPT. Understanding the temperature-dependent differentiation in gonadal structures during embryonic development is a prerequisite for investigating molecular basis underlying TSD. Thus, the result of the present study will facilitate further developmental studies on TSD in M. reevesii.