Anatomical study of the modified direct posterior gluteal splitting approach for acetabular fractures.

BACKGROUND: In this study, we investigated the area that can be addressed with an approach in which the skin incision is made directly above the dorsal column with Thiel cadaveric specimens. METHODS: Six Thiel cadaveric specimens were prepared. A skin incision was made directly above the dorsal column. The accessible proximal end from the proximal part of the greater sciatic notch to the gluteal ridge and the accessible distal end of the ischium were marked with a flat chisel. A molded 8-hole reconstruction plate was placed from the base of the ischium toward the gluteal ridge and fixed with 3 screws proximally and 2 screws distally. The length of the skin incision and the distance from each reference point on the bone to the reachable markings were assessed after the muscles were removed. RESULTS: Mean skin incision length was 9.3 ± 0.7 (range, 8.0-10.0) cm. In 3 of 6 cases, proximal screws were inserted through different spaces between muscle fibers. In all cases, we were able to reach at least the greater sciatic notch, the gluteal ridge at the level of superior border of the acetabulum, and the base of the ischial tuberosity. In all cases, an 8-hole plate could be placed from the gluteal ridge to the base of the ischium. There were no superior gluteal artery or sciatic nerve injuries in any of the cases. CONCLUSION: We anatomically investigated the area that can be addressed with an approach in which the skin incision was made directly above the dorsal column. In all cases, we were able to access the areas needed to reduce the fracture and place the plates necessary to stabilize the fracture through a 9.3 ± 0.7 cm skin incision. This approach can be a useful minimally invasive posterior approach for acetabular fractures.

The Impact of Potassium Dynamics on Cardiomyocyte Beating in Hemodialysis Treatment.

Background: Observational studies of intermittent hemodialysis therapy have reported that the excess decrease in K+ concentration in plasma (KP) during treatment is associated with the destabilization of cardiac function. Elucidating the mechanism by which the decrease in KP impairs myocardial excitation is indispensable for a deeper understanding of prescription design. Methods: In this study, by using an electrophysiological mathematical model, we investigated the relationship between KP dynamics and cardiomyocyte excitability for the first time. Results: The excess decrease in KP during treatment destabilized cardiomyocyte excitability through the following events: (1) a decrease in KP led to the prolongation of the depolarization phase of ventricular cells due to the reduced potassium efflux rate of the Kr channel, temporarily enhancing contraction force; (2) an excess decrease in KP activated the transport of K+ and Na+ through the funny channel in sinoatrial nodal cells, disrupting automaticity; (3) the excess decrease in KP also resulted in a significant decrease in the resting membrane potential of ventricular cells, causing contractile dysfunction. Avoiding an excess decrease in KP during treatment contributed to the maintenance of cardiomyocyte excitability. Conclusions: The results of these mathematical analyses showed that it is necessary to implement personal prescription or optimal control of K+ concentration in dialysis fluid based on predialysis KP from the perspective of regulatory science in dialysis treatment.

A new injection method for identifying the subpopliteal recess of the knee.

The posterolateral region of the knee has a complex and diverse anatomy. Hydrarthrosis of the knee can potentially communicate with other parts of the joint space. The joint fluid distribution reflects anatomical communications between synovial spaces. To observe the continuity between the knee joint cavity and the surrounding bursa, we devised a dissection method with a new injection agent, an eosin-containing congealed liquid that spreads uniformly over the entire space. The purpose of this study was to perform a detailed examination of the subpopliteal recess (SPR) where a bursa connects to the knee joint capsule. We also reported the advantages of this new injection agent compared with conventional materials (latex and epoxy resin). Twenty-two formalin-fixed cadavers (34 knees), two N-vinyl-pyrrolidone (NVP)-fixed cadavers (4 knees), and two cadavers (3 knees) fixed by Thiel's method were used. After filling the knee joint space and SPR with eosin congealed liquid, the specimens were dissected to investigate the morphology of the SPR. In addition, three different types of injection agents were assessed. The SPR extended distally along the popliteus tendon. The SPR length was 22.64 ± 11.38 mm from the upper end of the lateral tibial condyle to the lower end of the depression. The existence of a fabellofibular ligament made the SPR significantly longer, but abrasion of the femoral articular cartilage did not affect the SPR. Furthermore, the relationship between the popliteus muscle and the SPR was classified into three types (types 1-3). Types 2 and 3 in which the SPR extended to the proximal tibiofibular joint may cause instability of the knee joint. The eosin congealed liquid was highly useful in many aspects, such as fluidity and injection workability. The new dissection method with eosin congealed liquid provides insights into the anatomy of the posterior lateral knee, which are useful for radiological diagnoses and clinical treatments.

Depletion of LONP2 unmasks differential requirements for peroxisomal function between cell types and in cholesterol metabolism.

Peroxisomes play a central role in tuning metabolic and signaling programs in a tissue- and cell-type-specific manner. However, the mechanisms by which the status of peroxisomes is communicated and integrated into cellular signaling pathways are not yet understood. Herein, we report the cellular responses to peroxisomal proteotoxic stress upon silencing the peroxisomal protease/chaperone LONP2. Depletion of LONP2 triggered the accumulation of its substrate TYSND1 protease, while the overall expression of peroxisomal proteins, as well as TYSND1-dependent ACOX1 processing appeared normal, reflecting early stages of peroxisomal proteotoxic stress. Consequently, the alteration of peroxisome size and numbers, and luminal protein import failure was coupled with induction of cell-specific cellular stress responses. Specific to COS-7 cells was a strong activation of the integrated stress response (ISR) and upregulation of ribosomal biogenesis gene expression levels. Common changes between COS-7 and U2OS cell lines included repression of the retinoic acid signaling pathway and upregulation of sphingolipids. Cholesterol accumulated in the endomembrane compartments in both cell lines, consistent with evidence that peroxisomes are required for cholesterol flux out of late endosomes. These unexpected consequences of peroxisomal stress provide an important insight into our understanding of the tissue-specific responses seen in peroxisomal disorders.

Double Inferior Vena Cava with Major Predominance of the Left Inferior Vena Cava: A Cadaver Case Report.

We encountered a case of a double inferior vena cava with major predominance of the left inferior vena cava during an anatomical dissection course for medical students in 2015. The right inferior vena cava (normal inferior vena cava) was 2.0 mm wide, and the left inferior vena cava was 23.2 mm wide. The fine right inferior vena cava began at the right common iliac vein, ascended along the right side of the abdominal aorta, and then joined the left inferior vena cava at the level of the lower margin of the first lumbar vertebra. The dominant left inferior vena cava started from the left common iliac vein and ascended along the left side of the abdominal aorta. Most patients with a double inferior vena cava are asymptomatic, and these variants are incidentally detected by computed tomography or magnetic resonance imaging. Their presence may have significant implications for surgery, particularly abdominal surgery in patients with paraaortic lymphadenopathy and in those undergoing laparoscopic radical nephrectomy or inferior vena cava filter placement. We herein discuss the embryology of a double inferior vena cava based on detailed anatomical data of the variations of a double inferior vena cava, including those that require clinical attention.

A practical design equation for accurate quantification of CRRT filter design factors and convection effects.

Considering the increasing clinical need for continuous renal replacement therapy (CRRT), further improvement in therapeutic efficacy has become an important focus for researchers. Here, we designed nine CRRT filters with various combinations of hollow fiber packing density (PD) and housing shape (effective hollow fiber length (L) and inner housing diameter (D) ratio (L/D ratio)) to evaluate the clearance of middle molecular uremic toxins (MMs) via simulation of an in vitro continuous veno-venous hemodialysis treatment model. We also used Doppler ultrasonography to measure the maximum internal filtration flow rate (QIF-Max) as an aid; this approach facilitated an exploration of the impacts of various design factors on convection effects, while revealing the mechanisms influencing MM removal performance. Furthermore, we constructed a multiple linear regression model of design factors and QIF-Max, then conducted experimental verification. Finally, we proposed an accurate and practical design equation to quantify the design factors influencing CRRT filters and convection effects: QIF-Max=4.749×ND2+2.293×LD-34.775, where N/D2 and L/D affect QIF-Max by 15.0% and 85.0%, respectively. This design equation was able to effectively quantify the convection effects of CRRT filters with different design factors, thereby predicting MM removal performance; this convenient design equation can support the development of CRRT-related products.

The Key Structure of the Facial Soft Tissue: The Superficial Musculoaponeurotic System.

The superficial musculoaponeurotic system (SMAS) was advocated by Mitz and Peyronie in 1976. The concept of this superficial fascia was established by surgical findings of facelift surgery and is familiar to plastic surgeons and anatomists. However, detailed characteristics of this fascia are still not widely known among head and neck surgeons. Moreover, the SMAS is generally located at the parotid and cheek regions and divides facial fat into superficial and deep layers. The SMAS connects to the superficial temporal fascia cranially and to the platysma caudally. The frontal muscle and the peripheral part of the orbicularis oculi are also in the same plane. The exact expanse of the SMAS in the face is controversial. Some authors claimed that the SMAS exists in the upper lip, whereas others denied the continuity of the SMAS to the superficial temporal fascia in a histological study. There are various other opinions regarding SMAS aside from those mentioned above. The concept of the SMAS is very important for facial soft tissue surgeries because the SMAS is a good surgical landmark to avoid facial nerve injuries. Therefore, this article summarized SMAS from an anatomical point of view.

Effects of hollow fiber packing density and housing shape on the albumin filtration performance of CRRT filters.

Continuous renal replacement therapy (CRRT) has become the most commonly used acute blood purification therapy for critically ill patients. As a key point of extracorporeal blood circulation, the CRRT filter plays a decisive role in therapeutic efficacy. However, few in vitro studies have been conducted on CRRT filters, particularly concerning the effects of design factors on filter effectiveness and safety profile; no comprehensive evaluation system has been established. Here, we designed nine CRRT filters with various combinations of hollow fiber packing density (PD) and housing shape (effective hollow fiber length (L) and inner housing diameter (D) ratio (L/D ratio)) and introduced a high-frequency sampling pressure monitor to accurately monitor small changes in transmembrane pressure (TMP) and ultrafiltration rate (UFR) over time. We also used concentration polarization mass transfer resistance (Rc), change in sieving coefficient (S) of albumin over time, and amount of albumin removed (Mfld) to investigate the effects of two design factors on albumin filtration performance and analyze the mechanism of protein filtration performance over time, thereby establishing a comprehensive in vitro evaluation system to explore the safety profile of CRRT filters. Our results showed that the nine CRRT filters designed with different combinations of PD (50%, 55%, and 60%) and L/D ratio (2.9, 5.3, and 9.3) were able to maintain stability in terms of hemodynamics and water permeability; the lowest Mfld was PD = 60% and L/D ratio = 9.3, which indicates that design factor optimization can effectively control albumin filtration, thereby improving the safety profile of CRRT filters.

An Anatomical Dissection Method for Observation of Fibrous Facial Structures.

BACKGROUND: In recent years, structures including the superficial musculoaponeurotic system and retaining ligaments that support the facial soft tissue have been clarified. However, these structures are very difficult to observe in their entirety by the standard gross anatomical procedure (ie, dissection from superficial to deep layers). Furthermore, accurate descriptions of these structures are rare in both anatomical and plastic surgery textbooks. The aim of this study was to clarify the facial fibrous structures in a gross anatomical view. METHODS: The authors' novel method used soft facial tissue and bone. The tissue was fixed in gelatin and sectioned at a thickness of 5 to 10 mm. Each section was placed on a wooden board; the bone was then pinned, and the skin was pulled outward with sutures to hyperextend the soft tissue. Subsequently, the loose connective tissue was torn and fat tissue was removed under a surgical microscope. After the removal of fat tissue, the fibrous facial structures (eg, the superficial musculoaponeurotic system and retaining ligaments) could be observed clearly. RESULTS: The thickness of the sections allowed three-dimensional observation, such that a structure located deep within a section could be clearly observed. The expansion of soft tissue facilitated observation of the facial layer and fibrous structures, and the locations of nerves and vessels. Therefore, the facial layer structure was readily discerned. CONCLUSION: This method is likely to be very useful in the field of plastic surgery because it enabled intuitive identification of facial layers and their characteristics. CLINICAL RELEVANCE STATEMENT: The dissection method developed by the authors reveals the connected morphology of each tissue of the face, thus providing basic data for analyzing soft tissue changes due to aging and gravity. This will be useful for the development of anti-aging medicine.

Engraftment of allogeneic iPS cell-derived cartilage organoid in a primate model of articular cartilage defect.

Induced pluripotent stem cells (iPSCs) are a promising resource for allogeneic cartilage transplantation to treat articular cartilage defects that do not heal spontaneously and often progress to debilitating conditions, such as osteoarthritis. However, to the best of our knowledge, allogeneic cartilage transplantation into primate models has never been assessed. Here, we show that allogeneic iPSC-derived cartilage organoids survive and integrate as well as are remodeled as articular cartilage in a primate model of chondral defects in the knee joints. Histological analysis revealed that allogeneic iPSC-derived cartilage organoids in chondral defects elicited no immune reaction and directly contributed to tissue repair for at least four months. iPSC-derived cartilage organoids integrated with the host native articular cartilage and prevented degeneration of the surrounding cartilage. Single-cell RNA-sequence analysis indicated that iPSC-derived cartilage organoids differentiated after transplantation, acquiring expression of PRG4 crucial for joint lubrication. Pathway analysis suggested the involvement of SIK3 inactivation. Our study outcomes suggest that allogeneic transplantation of iPSC-derived cartilage organoids may be clinically applicable for the treatment of patients with chondral defects of the articular cartilage; however further assessment of functional recovery long term after load bearing injuries is required.

An Extremely Rare Case of Intestinal Malrotation with an Absent Inferior Vena Cava.

We present a case of intestinal malrotation with an absent inferior vena cava, which was found in a cadaver during a dissection course in our medical school. The intestinal malrotation was Amir-Jahed type 2, with the large intestine on the right side and the small intestine on the left side of the abdominal cavity. The descending colon was fixed on the right side of the posterior abdominal wall and continued into the pelvic cavity from the right side. The cadaver also had a venous system anomaly. The pre-renal segment of the inferior vena cava, which is a section between the renal vein and the hepatic vein, was absent. The inferior vena cava connected to the azygos vein after being joined by bilateral renal veins. The only hepatic segment of the inferior vena cava, which was posterior to the liver and received hepatic veins, penetrated the diaphragm and flowed into the right atrium. To our knowledge, this is the first report of these two anomalies appearing concurrently. We discuss the details of this case and the embryological considerations.

Present status of renal replacement therapy in lower-middle-income Asian countries: Cambodia, Myanmar, Laos, Vietnam, Mongolia, and Bhutan as of June 2019 (before COVID-19), from the interviews of leading doctors in every country: (duplicated English publication from "the special Japanese edition of educational lectures in the 64th annual meeting of the Japanese Society for Dialysis Therapy").

The present status of Cambodia, Myanmar, Laos, Vietnam, Mongolia, and Bhutan as of June 2019 was reviewed from the interviews of leading doctors in every country. The timing was until just 6 months before the COVID-19 pandemic broke out. The cost per hemodialysis session was 25-70 US dollar and expensive if it is compared with average monthly income of every country. In Cambodia and Laos, patients must cover 100% of expenses for maintenance hemodialysis, in Myanmar, the government covers the cost of once-weekly dialysis sessions, in Vietnam, the government covers 80% of the cost, and in Mongolia and Bhutan, the cost is fully covered by the government. Continuous ambulatory peritoneal dialysis was widely available in Vietnam and Mongolia, which have achieved a relative standard of social infrastructure, but is far from common in any of the other countries. The number of patients on dialysis is increasing with economic development in all countries. Diabetic nephropathy is a common primary reason for dialysis. None of the countries discussed in this article had clinical engineers who could maintain hemodialysis equipment and carry out clinical tasks in dialysis centers. Hospitals were not maintaining their equipment, and damaged units were kept in storage to be used for spare parts. None of the countries had dieticians to provide patients with dietary guidance. Establishment and training of both clinical engineers and registered dietitians are major projects that must be undertaken.

Infusion of Variable Chemical Structure to Tune Stacking among Metal-Organic Layers in 2D Nano MOFs.

Invited for the cover of this issue is the group of Biplab Manna at the University of Kumamoto. The image depicts various kinds of stacking between the metal-organic layers of MOFs. Read the full text of the article at 10.1002/chem.202201665.

Infusion of Variable Chemical Structure to Tune Stacking among Metal-Organic Layers in 2D Nano MOF.

Thickness of two-dimensional (2D) metal-organic frameworks (MOFs) govern their intriguing functionalities. Primarily this thickness is controlled by the stacking between the metal-organic layers (MOL). It is observed that until now such modulating factors for stacking efficiency of MOL are not well studied. Here, we report a fundamental hypothesis to comprehend regulation of stacking efficiency among MOLs as a function of chemical structure of organic ligands (dicarboxylic acids and pillar linkers). This basically involves a series of isostructural three-dimensional (3D) MOFs which contain linkers of variable chemical nature that could be depillared to generate 2D stacked MOFs of different thickness. Depending on the linkers, we encountered the formation of single MOL to stacked multiple MOLs as evidenced from atomic force microscopic and other experimental analysis. The present study gives a concrete correlation between the stacking within 2D MOFs (from monolayer to multilayers), and their 3D counter parts, which may provide a thickness tuning pathway for 2D MOFs.

Effect of Membrane Surface Area on Solute Removal Performance of Dialyzers with Fouling.

In a clinical situation, since membrane fouling often causes the reduction of solute removal performance of the dialyzer, it is necessary to evaluate the performance of the dialyzer, considering the effects of fouling even in aqueous in vitro experiments that are useful for the better design of dialyzers. We replicated the membrane fouling by immobilizing albumin on the membrane in a dialyzer using glutaraldehyde as a stabilizer. The modules of various membrane surface areas with and without replication of the fouling were used for performance evaluation of solute (creatinine, vitamin B12, and inulin) removal in dialysis experiments in vitro. Clearances for these solutes in the modules with fouling were lower than those without fouling. Furthermore, the smaller the surface area, the larger the fouling effect was observed in all solutes. Calculated pressure distribution in a module by using a mathematical model showed that the solute removal performance might be greatly affected by the rate of internal filtration that enhances the solute removal, especially for larger solutes. The increase in the rate of internal filtration should contribute to improving the solute removal performance of the dialyzer, with a higher effect in modules with a larger membrane surface area.

Semi-Quantitative Evaluation of Asymmetricity of Dialysis Membrane Using Forward and Backward Ultrafiltration.

Performance of the dialysis membrane is strongly dependent upon the physicochemical structure of the membrane. The objective of this study is to devise a new in vitro evaluation technique to quantify the physicochemical structures of the membrane. Three commercial dialyzers with cellulose triacetate (CTA), asymmetric CTA (termed ATA®), and polyether sulfone (PES) membranes (Nipro Co., Osaka, Japan) were employed for investigation. Forward and backward ultrafiltration experiments were performed separately with aqueous vitamin B12 (MW 1355), α-chymotrypsin (MW 25,000), albumin (MW 66,000) and dextran solutions, introducing the test solution inside or outside the hollow fiber (HF), respectively. Sieving coefficients (s.c.) for these solutes were measured under the test solution flow rate of 200 mL/min and the ultrafiltration rate of 10 mL/min at 310 K, according to the guidelines provided by Japanese academic societies. We defined the ratio of s.c. in the backward ultrafiltration to that in the forward ultrafiltration and termed it the index for asymmetricity (IA). The IA values were unity for vitamin B12 and α-chymotrypsin in all three of the dialyzers. The IA values for albumin, however, were 1.0 in CTA, 1.9 in ATA®, and 3.9 in PES membranes, respectively, which corresponded well with the fact that CTA is homogeneous, whereas ATA® and PES are asymmetrical in structure. Moreover, the asymmetricity of ATA® and PES may be different by twofold. This fact was verified in continuous basis by employing dextran solution before and after being fouled with albumin. These findings may contribute to the development of a novel membrane for improved success of dialysis therapy.

Retraction Note: Impact of the third wave of the COVID-19 pandemic and interventions to contain the virus on society and patients with kidney disease in Cambodia.

[This retracts the article DOI: 10.1186/s41100-021-00372-6.].

Effect of hollow fiber packing density and housing shape on the solute removal performance of CRRT filters for acute blood purification.

Continuous renal replacement therapy (CRRT) has a good therapeutic effect in a variety of diseases, such as acute kidney injury. CRRT filters should feature small membrane surface area, excellent water permeability and solute removal performance for long-term use. Solute removal performance depends on the physicochemical structure of the dialysis membrane as well as on the housing design. On the basis of the same hollow fiber membrane, optimizing the housing design can maximize the performance of the dialysis membrane. In this article, we experimentally demonstrated the influence of hollow fiber packing density (PD) and housing shape (effective hollow fiber length (L) and inner housing diameter (D) ratio (L/D ratio)) on the performance of CRRT filters. In each continuous hemodialysis mode and post-diluted continuous hemodiafiltration mode, we tested nine CRRT filters with the same high-flux membrane but with different PDs (50%, 55%, and 60%) and L/D ratios (2.9, 5.3, and 9.3), and we evaluated the effect of different combinations of the two design factors on solute clearance. Our results showed that unlike with the clearance of small molecular weight solutes, the clearance of medium molecular weight solute was obviously affected by PD and L/D ratio, and the design providing the best removal of medium molecular solutes among the nine experiments was PD = 60% and L/D ratio = 9.3. This article will help address the lack of research on CRRT filter housing design as well as lead to the development of higher performance filters for acute blood purification.

Structure of twin boundaries of cholesteric blue phase I.

We investigate numerically the structure of twin boundaries of cholesteric blue phases. Our study is based on the Landau-de Gennes continuum theory describing the orientational order of the liquid crystal by a second-rank tensor. We pay particular attention to blue phase I (BP I) with body-centered-cubic symmetry and consider twin boundaries between BP I lattices in which their (110) planes are shared and the (1[over ¯]12) plane of one lattice is parallel to the (11[over ¯]2) plane of the other as observed in previous experiments [Jin et al., Sci. Adv. 6, eaay5986 (2020)10.1126/sciadv.aay5986; Zhang et al., ACS Appl. Mater. Interf. 13, 36130 (2021)1944-824410.1021/acsami.1c06873]. We discuss two plausible cases in which the twin boundaries are parallel to the {112} planes or the {111} planes. In the former, disclination lines of obtusely bent form penetrate the twin boundaries, and in the latter straight disclination lines as well as bent ones are found at the twin boundaries. The former twin boundaries are energetically less costly, consistent with previous experimental identifications. From our numerical results the free energy of a twin boundary per unit area is estimated to be ≃4×10^{-6}Jm^{-2}, which indeed indicates that the formation of twin boundaries is not prohibitively costly.

Particulates formed in online prepared substitution fluid-Effect of acetic acid cleaning on endotoxin retentive filters.

INTRODUCTION: There is no standard for insoluble particulate matters in dialysate. We evaluated the insoluble particulate matters in online prepared substitution fluid. METHODS: We evaluated particle diameters and constituent elements of particles in online prepared substitution fluid and the final endotoxin retentive filter (ETRF). RESULTS: The measurement results with particles in the online prepared substitution fluid and particles attached to the final ETRF revealed that Ca-containing particles accounted for 11 particles and Si-containing particles accounted for 19 particles of 30 particles detected in the online prepared substitution fluid and the final ETRF. CONCLUSION: We presume that insoluble particulates in online prepared substitution fluid were Ca and Mg precipitated from dialysate and Si precipitated from dialysis water. Even if two ETRFs were connected in series, these particles were formed in the final ETRF.