Mapping of Long-Wavelength Phonon Contribution in the Thermal Transport of Alloyed Semiconductor Superlattices.

The mapping of long-wavelength phonons is important to understand and manipulate the thermal transport in multilayered structures, but it remains a long-standing challenge due to the collective behaviors of phonons. In this study, an experimental demonstration of mapping the long-wavelength phonons in an alloyed Al0.1Ga0.9As/Al0.9Ga0.1As superlattice system is reported. Multiple strategies to filter out the short- to mid-wavelength phonons are used. The phonon mean-free-path-dependent thermal transport properties directly demonstrate both the suppression effect of the ErAs nanoislands and the contribution of long-wavelength phonons. The contribution from phonons with mean free path longer than 1 µm is clearly demonstrated. A model based on the Boltzmann transport equation is proposed to calculate and describe the thermal transport properties, which depicts a clear physical picture of the transport mechanisms. This method can be extended to map different wavelength phonons and become a universal strategy to explore their thermal transport in various application scenarios.

Thickness dependent thermal performance of a poly(3,4-ethylenedioxythiophene) thin film synthesized via an electrochemical approach.

Polymer-based thermal interface materials (TIMs) have attracted wide attention in the field of thermal management because of their outstanding properties including light weight, low cost, corrosion resistance and easy processing. However, the low thermal conductivity (∼0.2 W m-1 K-1) of the intrinsic polymer matrix largely degrades the overall thermal performance of polymer-based TIMs even those containing highly thermal conductive fillers. Hence, enhancing the intrinsic thermal conductivity of the polymer matrix is one of the most critical problems needed to be solved. This paper studies the thermal conductivity of poly(3,4-ethylenedioxythiophene) (PEDOT) films fabricated via cyclic voltammetry. By controlling the number of cycles in the electrochemical synthesis, different thickness of PEDOT films could be obtained. A time-domain thermoreflectance (TDTR) system was employed to evaluate the thermal performance of such as-prepared PEDOT films. We have demonstrated that a PEDOT film with thickness of 40 nm achieves the highest out-of-plane thermal conductivity of ∼0.60 W m-1 K-1, which is almost three folds the thermal conductivity of commercially available pristine PEDOT:PSS film with similar thickness. The X-ray diffraction spectrum reveals that the PEDOT thin film with high crystallinity at the initial stage of electrochemical synthesis leads to enhanced thermal transportation. The findings in this work not only offer an opportunity to fabricate polymer materials exhibiting enhanced thermal conductivity, but also allow one to adjust the thermal performance of conducting polymers in practical applications.

Roles of PTBP1 in alternative splicing, glycolysis, and oncogensis.

Polypyrimidine tract-binding protein 1 (PTBP1) plays an essential role in splicing and is expressed in almost all cell types in humans, unlike the other proteins of the PTBP family. PTBP1 mediates several cellular processes in certain types of cells, including the growth and differentiation of neuronal cells and activation of immune cells. Its function is regulated by various molecules, including microRNAs (miRNAs), long non-coding RNAs (lncRNAs), and RNA-binding proteins. PTBP1 plays roles in various diseases, particularly in some cancers, including colorectal cancer, renal cell cancer, breast cancer, and glioma. In cancers, it acts mainly as a regulator of glycolysis, apoptosis, proliferation, tumorigenesis, invasion, and migration. The role of PTBP1 in cancer has become a popular research topic in recent years, and this research has contributed greatly to the formulation of a useful therapeutic strategy for cancer. In this review, we summarize recent findings related to PTBP1 and discuss how it regulates the development of cancer cells.

A comparative experimental study on the cross-plane thermal conductivities of nano-constructed Sb2Te3/(Cu, Ag, Au, Pt) thermoelectric multilayer thin films.

Thermoelectric multilayer thin films used in nanoscale energy conversion have been receiving increasing attention in both academic research and industrial applications. Thermal transport across multilayer interface plays a key role in improving thermoelectric conversion efficiency. In this study, the cross-plane thermal conductivities of nano-constructed Sb2Te3/(Cu, Ag, Au, Pt) thermoelectric multilayer thin films have been measured using time-domain thermoreflectance method. The interface morphology features of multilayer thin film samples were characterized by using scanning and transmission electron microscopes. The effects of interface microstructure on the cross-plane thermal conductivities of the multilayer thin films have been extensively examined and the thermal transfer mechanism has been explored. The results indicated that electron-phonon coupling occurred at the semiconductor/metal interface that strongly affected the cross-plane thermal conductivity. By appropriately optimizing the period thickness of the metal layer, the cross-plane thermal conductivity can be effectively reduced, thereby improving the thermoelectric conversion efficiency. This work presents both experimental and theoretical understanding of the thermal transport properties of Sb2Te3/metal multilayer thin film junctions with important implications for exploring a novel approach to improving the thermoelectric conversion efficiency.

Room-Temperature Multiferroics and Thermal Conductivity of 0.85BiFe1-2xTixMgxO3-0.15CaTiO3 Epitaxial Thin Films (x = 0.1 and 0.2).

Thin films of 0.85BiFe1-2xTixMgxO3-0.15CaTiO3 (x = 0.1 and 0.2, abbreviated to C-1 and C-2, respectively) have been fabricated on (001) SrTiO3 substrate with and without a conductive La0.7Sr0.3MnO3 buffer layer. The X-ray θ-2θ and ϕ scans, atomic force microscopy, and cross-sectional transmission electron microscopy confirm the (001) epitaxial nature of the thin films with very high growth quality. Both the C-1 and C-2 thin films show well-shaped magnetization-magnetic field hysteresis at room temperature, with enhanced switchable magnetization values of 145.3 and 42.5 emu/cm3, respectively. The polarization-electric loops and piezoresponse force microscopy measurements confirm the room-temperature ferroelectric nature of both films. However, the C-1 films illustrate a relatively weak ferroelectric behavior and the poled states are easy to relax, whereas the C-2 films show a relatively better ferroelectric behavior with stable poled states. More interestingly, the room-temperature thermal conductivity of C-1 and C-2 films are measured to be 1.10 and 0.77 W/(m·K), respectively. These self-consistent multiferroic properties and thermal conductivities are discussed by considering the composition-dependent content and migration of Fe-induced electrons and/or charged point defects. This study not only provides multifunctional materials with excellent room-temperature magnetic, ferroelectric, and thermal conductivity properties but may also stimulate further work to develop BiFeO3-based materials with unusual multifunctional properties.

Surface phononic graphene.

Strategic manipulation of wave and particle transport in various media is the key driving force for modern information processing and communication. In a strongly scattering medium, waves and particles exhibit versatile transport characteristics such as localization, tunnelling with exponential decay, ballistic, and diffusion behaviours due to dynamical multiple scattering from strong scatters or impurities. Recent investigations of graphene have offered a unique approach, from a quantum point of view, to design the dispersion of electrons on demand, enabling relativistic massless Dirac quasiparticles, and thus inducing low-loss transport either ballistically or diffusively. Here, we report an experimental demonstration of an artificial phononic graphene tailored for surface phonons on a LiNbO3 integrated platform. The system exhibits Dirac quasiparticle-like transport, that is, pseudo-diffusion at the Dirac point, which gives rise to a thickness-independent temporal beating for transmitted pulses, an analogue of Zitterbewegung effects. The demonstrated fully integrated artificial phononic graphene platform here constitutes a step towards on-chip quantum simulators of graphene and unique monolithic electro-acoustic integrated circuits.

The effect of leptin on the osteoinductive activity of recombinant human bone morphogenetic protein-2 in nude mice.

OBJECTIVE: To investigate the effect of leptin in the model of ectopic bone formation that utilizes subcutaneously implanted recombinant human bone morphogenetic protein-2 (rhBMP-2)-containing type I collagen discs. METHODS: This study was performed in the Clinical Research Center, Southern Medical University, Guangzhou, China from November 2008 to June 2009. A single dose of 20 ul saline (group A), 20 ug leptin (group B), 2 ug rhBMP-2 (group C), 2 ug rhBMP-2 + 20 ug leptin (group D), and type I collagen disks as a carrier were mixed, and subcutaneously implanted into the back of nude mice (n=12). The effect of ectopic bone formation was evaluated by radiography, dual-energy X absorptiometry, biochemical examination of alkaline phosphatase (ALP) activity, histological observation, and semi-quantitative evaluation 4 and 8 weeks after surgery. RESULTS: At 4 and 8 weeks after operation the radiographs, bone mass density, ALP, and histology values showed significant intragroup and intergroup differences, with those at 8 weeks being higher than those at 4 weeks. CONCLUSION: Our results indicated that the sustainedly released material with collagen as a carrier combined treatment with leptin and rhBMP-2 has a very good osteoinductive activity. Leptin is a positive modulator for the osteoinductive efficacy of BMPs, they have synergistic effect. Its mechanisms are probably related to promote the formation of new-vessels and proliferation/ differentiation of many kinds of cells.

Involvement of the nitric oxide-cyclic GMP-protein kinase G-K+ channel pathway in the antihyperalgesic effects of bovine lactoferrin in a model of neuropathic pain.

The possible involvement of the nitric oxide (NO)-cyclic GMP (cGMP)-protein kinase G (PKG) pathway on bovine lactoferrin (BLF)-induced spinal antihyperalgesic activity was elucidated in sciatic nerve injured rats. Intrathecal BLF reduced thermal hyperalgesia in a dose-dependent manner. Pretreatment with NG-L-nitro-arginine methyl ester (L-NAME, non-specific inhibitor of NO synthase), 7-nitroindazole (7-NI, neuronal NO synthase inhibitor), 1H-[1,2,4]-oxadiazolo [4,3-a] quinoxalin-1-one (ODQ, guanylyl-cyclase inhibitor), (9S, 10R, 12R)-2,3,9,10,11,12-hexahydro-10-methoxy-2, 9-dimethyl-1-oxo-9, 12-epoxy-1H-diindolo-[1,2,3-fg:3',2',1'-kl]pyrrolo[3,4-i][1,6]benzodiazocine-10-carboxylic acid methyl ester (KT-5823, specific PKG inhibitor) or glybenclamide (ATP-sensitive K+ channel blocker), but not NG-D-nitro-arginine methyl ester (D-NAME, an inactive enantiomer of l-NAME), d-Phe-Cys-Tyr-d-Trp-Orn-Thr-NH2 (CTOP, selective mu-opioid receptor antagonist) or naloxone (nonselective opioid receptor antagonist) prevented BLF-induced antihyperalgesia. Data suggest that BLF-induced spinal antihyperalgesia could be due to activation of the NO-cGMP-PKG-K+ channel pathway and it is not mediated by mu-opioid receptor in a model of neuropathic pain.