RESUMO
Traditional optical anti-counterfeiting (AC) is achieved by static printed images, which makes them susceptible to lower levels of security and easier replication. Therefore, it is essential to develop AC device with dynamic modulation for higher security. Electrophoretic display (EPD) has the advantages of low power consumption, high ambient contrast ratio, and capability of showing dynamic images which is suitable for dynamic AC applications. Herein, we prepared a dynamical AC device based on a fluorescent EPD, and achieving the image switch between black, white, and green fluorescence states under the dual-mode driving (electronic field and UV light). We loaded perovskite quantum dots (CsPbBr3) onto the TiO2 particles and further prepared fluorescent electrophoretic particles TiO2/CsPbBr3-3-PLMA (TiO/CPB-3) by grafting and polymerizing method. In addition, we fabricated the AC devices based on the fluorescent EPD, which exhibits the multifunctional AC, where the fluorescent EPD has a fast response time of 350 ms, a high contrast ratio of 17, and bright green fluorescence. This prototype demonstrates a new way for future dynamic AC and identification.
RESUMO
Visible light communication (VLC) can be integrated into a liquid crystal display (LCD) by modulating its backlight while normally showing pictures. Received by ordinary cameras, such integrated display and communication (IDAC) systems are promising for the Internet of Things and Metaverse. However, in the premise of unaffected display function, the capacity of current IDAC systems is limited, with data rates of very few kbps. This work proposes a new architecture: multiple-input, multiple-output (MIMO) VLC integrated into a mini-LED LCD, whose many backlight segments act as multiple transmitters. A camera utilizes the rolling shutter effect with independent pixel columns to form multiple outputs. The communication capacity is thus significantly multiplied by the backlight column number. In addition, local dimming, which is favorable for an LCD's contrast and power consumption, is exploited to achieve efficient signal modulation. We built a mini-LED LCD prototype with 8-by-20 backlight segments for experimental verification. The backlight segments multiplex a video-rate signal for local dimming and a high-frequency (â¼34 kHz) signal modulated through multi-pulse position modulation (MPPM) for VLC. By taking photographs with a camera 1.1 m away from the screen, a record-high rate of 201.6 kbps (approximately ten times faster than current IDAC systems) was experimentally achieved with a bit error rate satisfying the forward error correction. Improved image contrast due to local dimming was also observed.
RESUMO
As a pivotal component in human-machine interactions, display devices have undergone rapid development in modern life. Displays such as alternative current electroluminescence|alternative current electroluminescent (ACEL) devices with high flexibility and long operational lifetimes are essential for wearable electronics. However, ACEL devices are constrained by their inherent high driving voltage and complex fabrication processes. Our work presents an easy blade-coating method for fabricating flexible ACEL display devices based on an all-solution process. By dispersing BaTiO3 and ZnS/Cu powder into waterborne polyurethane, we successfully combined dielectric and fluorescence functionalities within a single layer, significantly reducing the device's driving voltage. Additionally, the ionic conducting hydrogel was chosen as a transparent electrode to achieve good electrical contact and strong interfacial adhesion through in situ polymerization. Owing to the unique method, our ACEL device exhibits high flexibility, low driving voltage (20-100 V), high brightness (300+ cd/m2 at 60 V), and environmental friendliness. Furthermore, by repurposing the hydrogel electrode, we integrated strain visualization capabilities within a single device, highlighting its potential for applications such as wearable healthcare monitoring.
RESUMO
Alternating current electroluminescence (ACEL) has great potential in flexible displays, especially in textile displays. However, since ACEL needs high-frequency, high-voltage AC signal to drive, there remains no driving scheme for pixelated ACEL display to achieve multiple gray scales. In this work, a driving scheme based on full-bridge inverters is proposed for passive-matrix ACEL (PMACEL) display, which achieves multiple gray scales by changing the duty cycle of the square wave. A single-pixel ACEL displaying 16 gray levels (4 bits) and a 5 × 8 fabric PMACEL displaying eight gray levels are demonstrated, enabling flexible ACEL devices to exhibit more vivid tones on a fabric substrate.
RESUMO
Electrophoretic displays (EPDs) utilize the electrophoretic particles in electronic ink (e-ink) to display different color states with bistability. Bistability of EPDs is achieved by placing colloidal particles in a highly viscous solvent to keep the distribution of colloidal particles stable without sustaining the external field, so it only consumes power when updating the image. The feature of low power consumption makes it suitable for applications such as advertising boards, price tags, etc. Apart from these applications, recent research on lateral-driving EPDs extends its applications to smart windows, privacy control, and so on. However, achieving bistability by simply increasing the viscosity of solvent is inefficient in the case of lateral driving operation. Therefore, it is deserving to have intensive study on the mechanism of bistability from other aspects. Herein, we propose a mechanism to investigate the charge adsorption behavior on the electrode to affect the bistability of particles, which is based on the "Stern layer adsorption/desorption" model. Based on the above mechanism, we further fabricated a hexadecyl trimethylammonium bromide (CTAB)/poly(vinyl alcohol) (PVA) composite film on the electrode to improve the bistability of lateral-driving EPD by reducing the diffusion current caused by unabsorbed charges. This developed lateral-driving EPD can significantly improve the bistability, which is enhanced from 40 s to 7 min, an increase by a factor of approximately 10. This work gives a way to consider the bistability of colloidal particles in nonpolar solvent.
RESUMO
Silver nanowire (AgNW) networks with self-assembled structures and synaptic connectivity have been recently reported for constructing neuromorphic memristors. However, resistive switching at the cross-point junctions of the network is unstable due to locally enhanced Joule heating and the Gibbs-Thomson effect, which poses an obstacle to the integration of threshold switching and memory function in the same AgNW memristor. Here, fragmented AgNW networks combined with Ag nanoparticles (AgNPs) and mercapto self-assembled monolayers (SAMs) are devised to construct memristors with stable threshold switching and memory behavior. In the above design, the planar gaps between NW segments are for resistive switching, the AgNPs act as metal islands in the gaps to reduce threshold voltage (Vth) and holding voltage (Vhold), and the SAMs suppress surface atom diffusion to avoid Oswald ripening of the AgNPs, which improves switching stability. The fragmented NW-NP/SAM memristors not only circumvent the side effects of conventional NW-stacked junctions to provide durable threshold switching at >Vth but also exhibit synaptic characteristics such as long-term potentiation at ultralow voltage (âªVth). The combination of NW segments, nanoparticles, and SAMs blazes a new trail for integrating artificial neurons and synapses in AgNW network memristors.
RESUMO
Low spatial resolution is an urgent problem in integral imaging light-field displays (LFDs). This study proposes a computational method to enhance the spatial resolution without losing angular resolution. How rays reconstruct voxels through lenslets is changed so that every ray through a lenslet merely provides a subpixel. The three subpixels of a pixel no longer form one voxel but three independent voxels. We further demonstrate imperfect integration of subpixels, called the sampling error, can be eliminated on specific image depths, including the central depth plane. By realigning subpixels in the above manner under no sampling error, the sampling rate of voxels is three times the conventional pixel-based LFDs. Moreover, the ray number of every voxel is preserved for an unaffected angular resolution. With unavoidable component alignment errors, resolution gains of 2.52 and 2.0 are verified in simulation and experiment by computationally updating the elemental image array. The proposed computational method further reveals that LFDs intrinsically have a higher space-bandwidth product than presumed.
RESUMO
In-plane switching electrophoretic display (IPS-EPD) is an emerging field of display technology which achieves particles moving horizontally through a lateral electric field. Compared to vertically driven electrophoretic display (V-EPD), IPS-EPD exhibits the feasibility of transparent display function. However, most of the previous research was hindered by long response time, low optical transmittance, or complex structures. In this paper, we have proposed a newly developed electrode layout and driving waveform for IPS-EPD, achieving a device with fast response time of 0.32 s, high transmittance of 58.07%, good transmittance-contrast ratio of 11.25, and simple structure, which show a significant improvement over other related research. Additionally, we elucidated the physical mechanism for the device through developing a particles motion simulation. Finally, we presented a prototype of an IPS-EPD with TFT panel, which exhibits excellent performance in various application scenarios, making it a possible application prospect in mobile phone cases, glasses, windows, and so on.
RESUMO
Two-field driving is the ultimate goal of field sequential color liquid crystal displays (FSC-LCDs) because it requires the lowest refresh rate and transmission bandwidth in addition to the intrinsic advantages of FSC-LCDs, e.g., tripled light efficiency and spatial resolution. However, fewer fields create a more significant challenge in controlling color breakup and distortion, as well as higher computational complexity in calculating LC signals. Regarding the difficulties, we propose a two-field FSC driving method that synchronously generates backlight and LC signals through two lightweight neural networks. The runtimes of the two networks are as fast as 1.23 and 1.79â ms per frame on a GeForce RTX 3090Ti graphic card, fully supporting real-time driving. Next, an over-partitioning approach is proposed to overcome the cross talk between backlight segments while processing high-resolution images. Besides the real-time feature, a reduction of 14.88% in color breakup concerning current methods and low distortion are verified. We also provide our open-source code.
RESUMO
Integral imaging light field displays (InIm-LFDs) can provide realistic 3D images by showing an elemental image array (EIA) under a lens array. However, it is always challenging to computationally generate an EIA in real-time with entry-level computing hardware because the current practice that projects many viewpoints to the EIA induces heavy computations. This study discards the viewpoint-based strategy, revisits the early point retracing rendering method, and proposes that InIm-LFDs and regular 2D displays share two similar signal processing phases: sampling and reconstructing. An InIm-LFD is demonstrated to create a finite number of static voxels for signal sampling. Each voxel is invariantly formed by homogeneous pixels for signal reconstructing. We obtain the static voxel-pixel mapping through arbitrarily accurate raytracing in advance and store it as a lookup table (LUT). Our EIA rendering method first resamples input 3D data with the pre-defined voxels and then assigns every voxel's value to its homogeneous pixels through the LUT. As a result, the proposed method reduces the computational complexity by several orders of magnitude. The experimental rendering speed is as fast as 7 to 10â ms for a full-HD EIA frame on an entry-level laptop. Finally, considering a voxel may not be perfectly integrated by its homogeneous pixels, called the sampling error, the proposed and conventional viewpoint-based methods are analyzed in the Fourier domain. We prove that even with severe sampling errors, the two methods negligibly differ in the output signal's frequency spectrum. We expect the proposed method to break the long-standing tradeoff between rendering speed, accuracy, and system complexity for computer-generated integral imaging.
RESUMO
The augmented reality head-up display (AR-HUD) attracts increasing attention. It features multiple focal planes to display basic and AR information, as well as a wider field of view (FOV). Using two picture generation units (PGUs) to create dual-focal AR-HUDs leads to expanded size, increased cost, and reduced reliability. Thus, we previously proposed an improved solution by dividing one PGU into two partitions that were separately imaged into two virtual images with an optical relay system. However, the resolution of the PGU was halved for either virtual image. Regarding the drawbacks, this paper proposes a dual-focal AR-HUD using one PGU and one freeform mirror. Either virtual image utilizes the full resolution of the PGU through polarization-multiplexing. By performing optical design optimization, high image quality, except for the distortion, is achieved in an eyebox of 130 by 60 mm for far (10 m, 13° by 4°) and near (2.5 m, 10° by 1°) images. Next, we propose a distortion correction method by directly inputting the distorted but clear images acquired in the design stage into the real HUD with an inversed optical path. The proposed optical architecture enables a compact system volume of 9.5â L, close to traditional single-focal HUDs. Finally, we build an AR-HUD prototype, where a polarizing reflective film and a twisted nematic liquid crystal cell achieve polarization-multiplexing. The expected image quality of the two virtual images is experimentally verified.
RESUMO
In the age of Internet of Things, electrophoretic electronic paper (E-paper) holds a unique position in the display area due to its energy-saving, environmental friendliness, excellent readability in strong ambient light, and eye protection. Compared with E-papers of microcapsules, microcups have several advantages including higher mechanical strength, lower production costs, and better feasibility to show multiple colors with high contrast, thereby making it a significant research interest. However, there is currently no systematic study on the structural mechanics and display performances of microcups. Herein, we simulate the structural stability of microcups with various shapes and sizes during nanoimprint process, and also calculated the aperture ratio of these microcups. We fabricated devices with different geometrical morphologies to verify the microcups for achieving a balance between high contrast, high transmittance and high structural stability. This study provides a new method for designing and manufacturing the E-papers of microcups in using nanoimprint roll-to-roll (R2R) production.
RESUMO
Stretchable strain sensors suffer the trade-off between sensitivity and linear sensing range. Developing sensors with both high sensitivity and wide linear range remains a formidable challenge. Different from conventional methods that rely on the structure design of sensing nanomaterial or substrate, here a heterogeneous-surface strategy for silver nanowires (AgNWs) and MXene is proposed to construct a hierarchical microcrack (HMC) strain sensor. The heterogeneous surface with distinct differences in cracks and adhesion strengths divides the sensor into two regions. One region contributes to high sensitivity through penetrating microcracks of the AgNW/MXene composite film during stretching. The other region maintains conductive percolation pathways to provide a wide linear sensing range through network microcracks. As a result, the HMC sensor exhibits ultrahigh sensitivity (gauge factor ≈ 244), broad linear range (É = 60%, R2 ≈ 99.25%), and fast response time (<30 ms). These merits are confirmed in the detection of large and subtle human motions and digital joint movement for Morse coding. The manipulation of cracks on the heterogeneous surface provides a new paradigm for designing high-performance stretchable strain sensors.
RESUMO
Field sequential color liquid crystal displays (FSC-LCDs) are promising for applications needing high brightness and high resolution because removing color filters brings three times the light efficiency and spatial resolution. In particular, the emerging mini-LED backlight introduces compact volume and high contrast. However, the color breakup severely deteriorates FSC-LCDs. Concerning color breakup, various 4-field driving algorithms have been proposed at the cost of an additional field. In contrast, although 3-field driving is more desired due to fewer fields used, few 3-field methods that can balance image fidelity and color breakup for diverse image content have been proposed. To develop the desired 3-field algorithm, we first derive the backlight signal of one multi-color field using multi-objective optimization (MOO), which achieves a Pareto optimality between color breakup and distortion. Next, considering the slow MOO, the MOO-generated backlight data forms a training set to train a lightweight backlight generation neural network (LBGNN), which can produce a Pareto optimal backlight in real-time (2.3â ms on GeForce RTX 3060). As a result, objective evaluation demonstrates a reduction of 21% in color breakup compared with currently the best algorithm in color breakup suppression. Meantime, the proposed algorithm controls the distortion within the just noticeable difference (JND), successfully addressing the conventional dilemma between color breakup and distortion for 3-field driving. Finally, experiments with subjective evaluation further validate the proposed method by matching the objective evaluation.
RESUMO
Shadow casting is essential in computer graphics, which can significantly enhance the reality of rendered images. However, shadow casting is rarely studied in polygon-based computer-generated holography (CGH) because state-of-art triangle-based occlusion handling methods are too complicated for shadow casting and unfeasible for complex mutual occlusion handling. We proposed a novel drawing method based on the analytical polygon-based CGH framework and achieved Z-buffer-based occlusion handling instead of the traditional Painter's algorithm. We also achieved shadow casting for parallel and point light sources. Our framework can be generalized to N-edge polygon (N-gon) rendering and accelerated using CUDA hardware, by which the rendering speed can be significantly enhanced.
RESUMO
The fast-growing motion capturing/monitoring technique has raised a great demand for flexible strain sensors. For capturing complex motions (e.g., facial motion), both the strain amplitude and direction should be accurately detected. Although some reported sensors based on anisotropic conductive networks are proved to show accurate localization of strain directions, it is still a great challenge to achieve both high sensitivity and a high sensing range in these designs. Here, a self-assembled Ti3C2Tx MXene film with parallel and periodic wrinkles is fabricated on a stretchable poly(dimethylsiloxane) substrate for constructing multi-directional strain sensors. During stretching, relative slip and crack will occur between the stacked MXene nanosheets, which contribute to high structural sensitivity in the MXene film. Meanwhile, the wrinkled structure contributes to high stretchability. As a result, the sensor based on the film with one-dimensional periodic wrinkles shows a large sensing range (>50%) and a gauge factor of 45. Furthermore, the sensor can accurately detect both the strain amplitude and direction by using the MXene film with two-dimensional wrinkles. It shows distinguishable electrical responses when detecting different-amplitude human/robot motions such as joint bending and walking. Additionally, the directions in complex human motions (e.g., facial motion) can also be well-tracked. This work provides an effective strategy to detect multi-directional motions.
RESUMO
Vision-correcting near-eye displays are necessary concerning the large population with refractive errors. However, varifocal optics cannot effectively address astigmatism (AST) and high-order aberration (HOAs); freeform optics has little prescription flexibility. Thus, a computational solution is desired to correct AST and HOA with high prescription flexibility and no increase in volume and hardware complexity. In addition, the computational complexity should support real-time rendering. We propose that the light field display can achieve such computational vision correction by manipulating sampling rays so that rays forming a voxel are re-focused on the retina. The ray manipulation merely requires updating the elemental image array (EIA), being a fully computational solution. The correction is first calculated based on an eye's wavefront map and then refined by a simulator performing iterative optimization with a schematic eye model. Using examples of HOA and AST, we demonstrate that corrected EIAs make sampling rays distributed within ±1 arcmin on the retina. Correspondingly, the synthesized image is recovered to nearly as clear as normal vision. We also propose a new voxel-based EIA generation method considering the computational complexity. All voxel positions and the mapping between voxels and their homogeneous pixels are acquired in advance and stored as a lookup table, bringing about an ultra-fast rendering speed of 10â ms per frame with no cost in computing hardware and rendering accuracy. Finally, experimental verification is carried out by introducing the HOA and AST with customized lenses in front of a camera. As a result, significantly recovered images are reported.
RESUMO
Stretchable hydrogel-based strain sensors suffer from limited sensitivity, which urgently requires further breakthroughs for precise and stable human-computer interaction. Here, an efficient microstructural engineering strategy is proposed to significantly enhance the sensitivity of hydrogel-based strain sensors by sandwiching an emulsion-polymerized polyacrylamide organohydrogel microsphere membrane between two Ecoflex films, which are accompanied by crack generation and propagation effects upon stretching. Consequently, the as-developed strain sensor exhibits ultrahigh sensitivity (gauge factor (GF) of 1275), wide detection range (100% strain), low hysteresis, ultralow detection limit (0.05% strain), good fatigue resistance, and low fabrication cost. In addition, the sensor features good water, dehydration, and frost resistance, enabling real-time strain monitoring in various complex conditions due to the encapsulation of Ecoflex film and the addition of glycerol and KCl. Through further structural manipulation, the device achieves superior response to tiny strains, with a GF value of 98.3 in the strain range of less than 1.5%. Owing to the high strain sensing performance, the sensor is able to detect various human activities from swallowing to finger bending even under water. On this basis, a wireless sensing system with apnea warning and single-channel gesture recognition capabilities is successfully demonstrated, demonstrating its great promise as wearable electronics.
Assuntos
Dispositivos Eletrônicos Vestíveis , Humanos , Microesferas , Eletrônica , Hidrogéis , EngenhariaRESUMO
The mini-LED as the backlight of field sequential color LCD (FSC-LCD) enables high contrast, thin volume, and theoretically tripled light efficiency and resolution. However, color breakup (CBU) induced by a relative speed between an observer and the display severely limits the application of FSC-LCDs. Several driving algorithms have been proposed for CBU suppression, but their performance depends on image content. Moreover, their performance plateaus with increasing image segment number, preventing taking advantage of the massive segments introduced by mini-LEDs. Therefore, this study proposes an image content-adaptive driving algorithm for mini-LED FSC-LCDs. Deep learning-based image classification accurately determines the best FSC algorithm with the lowest CBU. In addition, the algorithm is heterogeneous that the image classification is independently performed in each segment, guaranteeing minimized CBU in all segments. We perform objective and subjective validation. Compared with the currently best algorithm, the proposed algorithm improves the performance in suppressing CBU by more than 20% using two evaluation metrics, supported by experiment-based subjective evaluation. Mini-LED FSC-LCDs driven by the proposed algorithm with outstanding CBU suppression can be ideal for display systems requiring high brightness and high resolution, such as head-up displays, virtual reality, and augmented reality displays.
RESUMO
Armed with the merits of one-dimensional nanostructures (flexibility, high aspect ratio, and anisotropy) and metals (high conductivity, plasmonic properties, and catalytic activity), metal nanowires (MNWs) have stood out as a new class of nanomaterials in the last two decades. They are envisaged to expedite significantly and even revolutionize a broad spectrum of applications related to display, sensing, energy, plasmonics, photonics, and catalysis. Compared with disordered MNWs, well-organized MNWs would not only enhance the intrinsic physical and chemical properties, but also create new functions and sophisticated architectures of optoelectronic devices. This paper presents a comprehensive review of assembly strategies of MNWs, including self-assembly for specific structures, alignment for anisotropic constructions, and patterning for precise configurations. The technical processes, underlying mechanisms, performance indicators, and representative applications of these strategies are described and discussed to inspire further innovation in assembly techniques and guide the fabrication of optoelectrical devices. Finally, a perspective on the critical challenges and future opportunities of MNW assembly is provided.