Extracellular vesicle-coupled miRNA profiles of chicken seminal plasma and their potential interaction with recipient cells.

The presence of EVs in seminal plasma (SPEVs) suggests their involvement on fertility via transmitting information between the original cells and recipient cells. SPEVs-coupled miRNAs have been shown to affect sperm motility, maturation, and capacitation in mammals, but rarely in poultry species. The present study aims to reveal the profile of SPEVs miRNAs and their potential effect on sperm storage and function in poultry. The SPEVs was successfully isolated from 4 different chicken breeds by ultracentrifugation and verified. Deep sequencing of SPEVs small RNA library of each breed identified 1077 miRNAs in total and 563 shared ones. The top 10 abundant miRNAs (such as miR-10-5p, miR-100-5p, and miR-10a-5p etc.) accounted for around 60% of total SPEVs miRNA reads and are highly conserved across species, predisposing their functional significance. Target genes prediction and functional enrichment analysis indicated that the most abundantly expressed miRNAs may regulate pathways like ubiquitin-mediated proteolysis, endocytosis, mitophagy, glycosphingolipid biosynthesis, fatty acid metabolism, and fatty acid elongation. The high abundant SPEVs-coupled miRNAs were found to target 107 and 64 functionally important mRNAs in the potential recipient cells, sperm and sperm storage tubules (SST) cells, respectively. The pathways that enriched by target mRNAs revealed that the SPEVs-coupled miRNA may rule the fertility by affecting the sperm maturation and regulating the female's immune response and lipid metabolism. In summary, this study presents the distinctive repertoire of SPEVs-coupled miRNAs, and extends our understanding about their potential roles in sperm maturation, capacitation, storage, and fertility, and may help to develop new therapeutic strategies for male infertility and sperm storage.

Two-Dimensional Graphene-Based Potassium Channels Built at an Oil/Water Interface.

Graphene-based laminar membranes exhibit remarkable ion sieving properties, but their monovalent ion selectivity is still low and much less than the natural ion channels. Inspired by the elementary structure/function relationships of biological ion channels embedded in biomembranes, a new strategy is proposed herein to mimic biological K+ channels by using the graphene laminar membrane (GLM) composed of two-dimensional (2D) angstrom(Å)-scale channels to support a simple model of semi-biomembrane, namely oil/water (O/W) interface. It is found that K+ is strongly preferred over Na+ and Li+ for transferring across the GLM-supported water/1,2-dichloroethane (W/DCE) interface within the same potential window (-0.1-0.6 V), although the monovalent ion selectivity of GLM under the aqueous solution is still low (K+/Na+~1.11 and K+/Li+~1.35). Moreover, the voltammetric responses corresponding to the ion transfer of NH4+ observed at the GLM-supported W/DCE interface also show that NH4+ can often pass through the biological K+ channels due to their comparable hydration-free energies and cation-π interactions. The underlying mechanism of as-observed K+ selective voltammetric responses is discussed and found to be consistent with the energy balance of cationic partial-dehydration (energetic costs) and cation-π interaction (energetic gains) as involved in biological K+ channels.

Research Note: Genetic parameters for egg production and clutch-related traits in indigenous Beijing-You chickens.

Egg products from indigenous chickens have growing market shares as consumers are pursuing differentiation in egg consumption. The genetic improvement in egg production performance of those breeds is crucial for increasing the economic profit. This study aimed to estimate genetic parameters for egg production and clutch-related traits in indigenous Beijing-You chickens for understanding the genetic architecture and exploring proper biological traits for selection. Data on traits including age at first egg (AFE), egg number (EN), average clutch length (ACL), maximum clutch length (MCL), number of clutches (NC) and pauses (NP), and average pause length (APL) were collected from 4 generations of purebred Beijing-You chickens based on the 43-wk and 66-wk of individual egg production record. The heritabilities, genetic and phenotypic correlations were analyzed by the DMU software with the restricted maximum likelihood method in a multivariate animal model. The results showed that the AFE of Beijing-You chickens was 174.45 d of age, and its heritability was as high as 0.62. The heritability was 0.26 for EN43 and 0.18 for EN66. The clutch traits including ACL, MCL, NC, and NP were moderate to high heritable (h2 = 0.15-0.39), but APL was very low heritable (h2 = 0.05). Genetic correlations were high between AFE and EN (rG(AFE, EN43) = -0.79, rG(AFE, EN66) = -0.39), whereas low between AFE and ACL (rG(AFE, ACL43) = -0.08, rG(AFE, ACL66) = 0.01) and MCL (rG(AFE, MCL) = -0.07). EN had higher correlations with ACL (rG(EN43, ACL43) = 0.59, rG(EN66, ACL66) = 0.40) than that with MCL (rG(EN43, MCL43) = 0.56, rG(EN66, MCL66) = 0.32). The heritability for ACL43 (h2 = 0.38) was higher than that for MCL43 (h2 = 0.33). ACL43 had a positive correlation with EN66 (rG(ACL43, EN66) = 0.62). These results indicated that the egg production of whole laying period could be improved by early selection for AFE and ACL at the same time in Beijing-You chickens.

Rheological and Mechanical Properties of Bentonite-Cement Paste Reinforced with Basalt Fibers.

Bentonite cement paste (BCP) is among the grouting materials used widely in large-pore grouting and karst cave treatment. The mechanical properties of bentonite cement paste (BCP) will be improved by additional basalt fibers (BF). In this study, the effects of basalt fiber (BF) contents and their lengths on the rheological and mechanical properties of bentonite cement paste (BCP) have been examined. Yield stress (YS), plastic viscosity (PV), unconfined compressive strength (UCS), and splitting tensile strength (STS) were used to evaluate the rheological and mechanical properties of basalt fiber-reinforced bentonite cement paste (BFBCP). Scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS) characterize microstructure development. The results indicate that the Bingham model can provide the rheological behavior of basalt fibers and bentonite cement paste (BFBCP). The yield stress (YS) and plastic viscosity (PV) increase as the content and length of basalt fiber (BF) increase. The effect of fiber content on yield stress (YS) and plastic viscosity (PV) is greater than that of fiber length. The addition of basalt fiber (BF) enhanced the unconfined compressive strength (UCS) and splitting tensile strength (STS) of basalt fiber-reinforced bentonite cement paste (BFBCP) at the optimum basalt fiber (BF) content of 0.6%. The optimum basalt fiber (BF) content tends to increase as curing age increases. The basalt fiber length of 9 mm is the most effective for improving unconfined compressive strength (UCS) and splitting tensile strength (STS). The large increments in unconfined compressive strength (UCS) and splitting tensile strength (STS) were 19.17% and 28.21% for the basalt fiber-reinforced bentonite cement paste (BFBCP), with a basalt fiber length of 9 mm and content of 0.6%. Scanning electron microscopy (SEM) shows that the randomly distributed basalt fiber (BF) forms a spatial network structure in basalt fiber-reinforced bentonite cement paste (BFBCP), which composes a stress system under the action of cementation. Basalt fibers (BF) used in crack generation processes slow down the flow through bridging and occur in the substrate to improve the mechanical properties of basalt fiber-reinforced bentonite cement paste (BFBCP).

Design and Implementation of a Chain-Type Direct Push Drilling Rig for Contaminated Sites.

For sites where volatile organic compounds are present, the direct push method, in combination with other sensors for investigation, is a powerful method. The investigation process is an integrated drilling and sensing process, but the trajectory of the probe carrying the sensor is ambiguous. This paper explores and introduces the application of a chain-type direct push drilling rig by designing and building a chain-type direct push miniature drilling rig. This rig allows for indoor experimental studies of direct push trajectories. The chain-type direct push drilling model is proposed based on the mechanism of chain transmission. The drilling rig provides a steady direct thrust through the chain, which is driven by a hydraulic motor. In addition, the drilling tests and results described prove that the chain could be applied to direct push drilling. The chain-type direct push drilling rig can drill to a depth of 1940 mm in single-pass and up to 20,000 mm in multiple passes. The test results also indicate that it drills a total length of 462.461 mm and stops after 87.545 s of operation. The machine can provide a drilling angle of 0-90° and keep the borehole angle fluctuating within 0.6° with the characteristics of strong adjustability, flexibility, continuity, stability, and low disturbance, which is of great value and significance for studying the drilling trajectory of direct push tools and obtaining more accurate investigation data.

Intramolecular Partners in Asymmetric Catalysis Copolymerization: Highly Enantioselective and Controllable at Enhanced Temperatures and Low Loadings.

Asymmetric copolymerization of meso-epoxide and anhydride is a powerful strategy for preparing various isotactic polyesters with two contiguous stereogenic centers. However, the previous binary systems suffered from slow rates at low loadings, poor enantioselectivities and transesterification reactions at enhanced temperatures. Herein, we report novel dinuclear aluminium complexes with multiple chiralities and ammonium salts anchored on ligand frameworks. These bifunctional catalysts exhibit high activities and enantioselectivities for epoxides/anhydrides copolymerizations at harsh conditions via intramolecularly synergistic catalysis, affording polyesters with unprecedented molecular weights and narrow distributions. Notably, no transesterification reactions were observed, significantly different from the binary catalyst/cocatalyst pairs. This study represents a rare example regarding temperature-independent asymmetric induction for preparing chiral polymers from achiral monomers.