RESUMO
Iron sludge, produced during the drinking water treatment process, can be recycled as potential iron resource to create environmental functional material. In this study, sulfur-iron composites derived from iron sludge (S-Fe composites) was synthesized through sulfidation and carbonization, and used for the tetracycline (TC) removal under aerobic and anoxic conditions. The reactivities of these as-prepared products were strongly depended on pyrolysis temperatures. In particular, sulfidated nanoscale zero-valent iron loaded on carbon (S-nFe0@CIS) carbonized at 800 °C exhibited the highest TC removal efficiency with 86.6% within 30 min at circumneutral pH compared with other S-Fe composites. The crystalline structure of α-Fe0, FeSx and S0 as main active sites in S-nFe0@CIS promoted the degradation of TC. Moreover, the Fe/S molar ratios significantly affected the TC removal rates, which reached the best value as the optimal S/Fe of 0.27. The results illustrated that the optimized extent of sulfidation could facilitate electron transfer from nFe0 towards contaminants and accelerate Fe(III)/Fe(II) cycle in reaction system compared to bared nFe0@CIS. We revealed that removal of TC by S-nFe0@CIS in the presence of dissolved oxygen (DO) is mainly attributed to oxidation, adsorption and reduction pathways. Their contribution to TC removal were 31.6%, 25.2% and 28.8%, respectively. Furthermore, this adsorption-oxygenation with the formation of S-nFe0@CIS-TC* complexes was a surface-mediated process, in which DO was transformed by the structural FeSx on complex surface to â¢OH with the generation of H2O2 intermediate. The intermediates of TC and toxicity analysis indicate that less toxicity products generated through degradation process. This study provides a new reclamation of iron sludge and offers a new insight into the TC removal by S-nFe0@CIS under aerobic conditions.
Assuntos
Esgotos , Poluentes Químicos da Água , Ferro/química , Peróxido de Hidrogênio , Tetraciclina/química , Antibacterianos/química , Oxigênio , Poluentes Químicos da Água/análiseRESUMO
Physics-based multi-scale in silico models offer an excellent opportunity to study the effects of heterogeneous tissue damage on airflow and pressure distributions in COVID-19-afflicted lungs. The main objective of this study is to develop a computational modeling workflow, coupling airflow and tissue mechanics as the first step towards a virtual hypothesis-testing platform for studying injury mechanics of COVID-19-afflicted lungs. We developed a CT-based modeling approach to simulate the regional changes in lung dynamics associated with heterogeneous subject-specific COVID-19-induced damage patterns in the parenchyma. Furthermore, we investigated the effect of various levels of inflammation in a meso-scale acinar mechanics model on global lung dynamics. Our simulation results showed that as the severity of damage in the patient's right lower, left lower, and to some extent in the right upper lobe increased, ventilation was redistributed to the least injured right middle and left upper lobes. Furthermore, our multi-scale model reasonably simulated a decrease in overall tidal volume as the level of tissue injury and surfactant loss in the meso-scale acinar mechanics model was increased. This study presents a major step towards multi-scale computational modeling workflows capable of simulating the effect of subject-specific heterogenous COVID-19-induced lung damage on ventilation dynamics.
Assuntos
COVID-19 , Simulação por Computador , Computadores , Humanos , Pulmão/diagnóstico por imagem , Ventilação Pulmonar , Mecânica Respiratória , Fluxo de TrabalhoRESUMO
A linear accelerator has three independent axes that are nominally intersecting at the isocenter. Modern treatment techniques require the coincidence of these axes to lie within a 1-mm diameter sphere. A solution to verify this requirement is to wrap a film on a cylindrical surface, align the cylinder to the linac's isocenter and gantry axis, and take multiple exposures of slits, rotating either the gantry, collimator, or couch between exposures. The resulting exposure pattern is the 3D equivalent of the 2D star shot and encodes sufficient information to determine each axis' position in 3D. Moreover, this method uses a single sheet 8"x10" film, a standard film scanner, and a phantom that can be readily built in-house, making a practical solution to this 3D-measurement problem.
Assuntos
Aceleradores de Partículas , Humanos , Imagens de FantasmasRESUMO
Reirradiation of recurrent glioblastomas is most commonly managed with hypofractionated external beam radiation with a modest overall effect. GammaTile, which is a Cesium-131 source embedded in collagen mesh, is an approach that allows the surgical bed of resectable intracranial tumors to receive a greater biological dose than is possible with any form of external beam radiation therapy (EBRT). In this case report, a 28-year-old male presents with a WHO grade 4 isocitrate dehydrogenase (IDH)-mutant astrocytoma (formerly secondary glioblastoma) of the left occipital/parietal lobe after receiving 45 Gy and two cycles of adjuvant temozolomide four years prior for a grade 3 IDH-mutant astrocytoma. The patient proceeded to undergo craniotomy with maximal safe resection and application of GammaTile to a dose of 60 Gy at 5mm depth. Shortly afterward, he developed symptomatic progression of disease in the bilateral splenium and left thalamus/basal ganglia. We irradiated the undertreated residual disease with EBRT to a dose of 35 Gy in 10 fractions without introducing excessive dose to the GammaTile irradiated volume. This was achieved by creating one portion of the planning target volume with a homogeneous dose and another part where the delivered dose decreased with the GammaTile dose buildup. Treatment planning utilized the Gradient Optimization feathering technique with non-coplanar volumetric modulated arc therapy. The resulting composite between the hypofractionated EBRT and GammaTile dose distribution created an approximate dose equivalent of 50 Gy in 2 Gy fractions to the residual disease with no hot spots or areas of under coverage. This is the first report showing the feasibility of combining GammaTile with dose-matched EBRT volumes in a reproducible manner to sub-totally resected, recurrent intracranial neoplasms.
RESUMO
Metallic gratings can support Fano resonances when illuminated with EM radiation, and their characteristic reflectivity versus incident angle lineshape can be greatly affected by the surrounding dielectric environment and the grating geometry. By using conformal oblique incidence thin film deposition onto an optical grating substrate, it is possible to increase the grating amplitude due to shadowing effects, thereby enabling tailoring of the damping processes and electromagnetic field couplings of the Fano resonances, hence optimizing the associated localized electric field intensity. To investigate these effects we compare the optical reflectivity under resonance excitation in samples prepared by oblique angle deposition (OAD) and under normal deposition (ND) onto the same patterned surfaces. We observe that by applying OAD method, the sample exhibits a deeper and narrower reflectivity dip at resonance than that obtained under ND. This can be explained in terms of a lower damping of Fano resonance on obliquely deposited sample and leads to a stronger localized electric field. This approach opens a fabrication path for applications where tailoring the electromagnetic field induced by Fano resonance can improve the figure of merit of specific device characteristics, e.g. quantum efficiency (QE) in grating-based metallic photocathodes.