Self-Assembled Multilayer-Modified Needles Simulate Acupuncture and Diclofenac Sodium Delivery for Rheumatoid Arthritis.

A novel therapeutic approach combining acupuncture and diclofenac sodium (DS) administration was established for the potential treatment for rheumatoid arthritis (RA). DS is a commonly used anti-inflammatory and analgesic drug but has short duration and adverse effects. Acupoints are critical linkages in the meridian system and are potential candidates for drug delivery. Herein, we fabricated a DS-loaded multilayer-modified acupuncture needle (DS-MMAN) and investigated its capacity for inhibiting RA. This DS-MMAN possesses sustained release properties and in vitro anti-inflammatory effects. Experimental results showed that the DS-MMAN with microdoses can enhance analgesia and efficiently relieve joint swelling compared to the oral or intra-articular administration of DS with gram-level doses. Moreover, the combination of acupoint and DS exerts a synergistic improvement in inflammation and joint damage. Cytokine and T cell analyses in the serum indicated that the application of DS-MMAN suppressed the levels of pro-inflammatory factors and increased the levels of anti-inflammatory factors. Furthermore, the acupoint administration via DS-MMAN could decrease the accumulation of DS in the liver and kidneys, which may express better therapeutic efficiency and low toxicity. The present study demonstrated that the acupuncture needle has the potential to build a bridge between acupuncture and medication, which would be a promising alternative to the combination of traditional and modern medicine.

Salvia miltiorrhiza augments endothelial cell function for ischemic hindlimb recovery.

Salvia miltiorrhiza (Salvia miltiorrhiza) root, as a traditional herb, is widely applied to pharmacotherapy for vascular system disease. In this study, we elucidate the therapy mechanism of Salvia miltiorrhiza by using a model of hindlimb ischemia. Blood perfusion measurement showed that intravenous administration of the Water Extract of Salvia miltiorrhiza (WES) could facilitate damaged hindlimb blood flow recovery and blood vessel regeneration. In vitro mRNA screen assay in cultured human umbilical vein endothelial cells (HUVECs) show that WES induced increased NOS3, VEGFA, and PLAU mRNA levels. Endothelial NOS (eNOS) promotor reporter analysis revealed that WES and the major ingredients danshensu (DSS) could enhance eNOS promoter activity. Additionally, we found that WES and its ingredients, including DSS, protocatechuic aldehyde (PAI), and salvianolic acid A (SaA), promoted HUVECs growth by the endothelial cell viability assays. A mechanistic approach confirmed that WES augments HUVECs proliferation through the activation of extracellular signal-regulated kinase (ERK) signal pathway. This study reveals that WES promotes ischemic remodeling and angiogenesis through its multiple principal ingredients, which target and regulate multiple sites of the network of the blood vessel endothelial cell regenerating process.

Design of an Injectable Magnetic Hydrogel Based on the Tumor Microenvironment for Multimodal Synergistic Cancer Therapy.

Conventional tumor chemotherapy is limited by its low therapeutic efficacy and side effects, which severely hold back its further application. Drug delivery systems (DDSs) based on nanomaterials have attracted wide interest in cancer treatment; especially, the system can realize efficient synergistic therapies. Here, we designed a smart hydrogel drug delivery system with multiple responses to enhance the tumor treatment effect. By cross-linking oxidized hydroxypropyl cellulose with carboxymethyl chitosan, an injectable hydrogel was obtained, into which artesunate (ART), ferroferric oxide (Fe3O4) nanoparticles, and black phosphorus nanosheets (BPs) were preloaded. This DDS has multiple functions including magnetic targeting, pH sensitivity, chemodynamic therapy, and photothermal response. This nanoparticle-composited hydrogel not only preserved excellent rheological properties but also allowed for an accurate stable drug release at tumor sites and synergistic effects of multiple therapies. The in vitro and in vivo experiments revealed that this DDS could efficiently eliminate the HepG2 tumor with good biocompatibility. Taken together, this study clarifies the possible antitumor mechanism of this ART-loaded nanoparticle-composited hydrogel and provides a new strategy for synergistic photothermal-chemo-chemodynamic therapy.

Infection Microenvironment-Sensitive Photothermal Nanotherapeutic Platform to Inhibit Methicillin-Resistant Staphylococcus aureus Infection.

Methicillin-resistant Staphylococcus aureus (MRSA) can induce multiple inflammations. The biofilm formed by MRSA is resistant to a variety of antibiotics and is extremely difficult to cure, which seriously threatens human health. Herein, a nanoparticle encapsulating berberine with polypyrrole core and pH-sensitive shell to provide chemo-photothermal dual therapy for MRSA infection is reported. By integrating photothermal agent polypyrrole, berberine, acid-degradable crosslinker, and acid-induced charge reversal polymer, the nanoparticle exhibited highly efficient MRSA infection treatment. In normal uninfected areas and bloodstream, nanoparticles showed negatively charged, demonstrating high biocompatibility and excellent hemocompatibility. However, once arriving at the MRSA infection site, the nanoparticle can penetrate and accumulate in the biofilm within 2 h. Simultaneously, berberine can be released into biofilm rapidly. Under the combined effect of photothermal response and berberine inhibition, 88.7% of the biofilm is removed at 1000 µg mL-1 . Moreover, the nanoparticles have an excellent inhibitory effect on biofilm formation, the biofilm inhibition capacity can reach up to 90.3%. Taken together, this pH-tunable nanoparticle can be employed as a new generation treatment strategy to fight against the fast-growing MRSA infection.

A multi-herb-combined remedy to overcome hyper-inflammatory response by reprogramming transcription factor profile and shaping monocyte subsets.

Traditional Chinese multi-herb-combined prescriptions usually show better performance than a single agent since a group of effective compounds interfere multiple disease-relevant targets simultaneously. Huang-Lian-Jie-Du decoction is a remedy made of four herbs that are widely used to treat oral ulcers, gingivitis, and periodontitis. However, the active ingredients and underlying mechanisms are not clear. To address these questions, we prepared a water extract solution of Huang-Lian-Jie-Du decoction (HLJDD), called it as WEH (Water Extract Solution of HLJDD), and used it to treat LPS-induced systemic inflammation in mice. We observed that WEH attenuated inflammatory responses including reducing production of cytokines, chemokines and interferons (IFNs), further attenuating emergency myelopoiesis, and preventing mice septic lethality. Upon LPS stimulation, mice pretreated with WEH increased circulating Ly6C- patrolling and splenic Ly6C+ inflammatory monocytes. The acute myelopoiesis related transcriptional factor profile was rearranged by WEH. Mechanistically we confirmed that WEH interrupted LPS/TLR4/CD14 signaling-mediated downstream signaling pathways through its nine principal ingredients, which blocked LPS stimulated divergent signaling cascades, such as activation of NF-κB, p38 MAPK, and ERK1/2. We conclude that the old remedy blunts LPS-induced "danger" signal recognition and transduction process at multiple sites. To translate our findings into clinical applications, we refined the crude extract into a pure multicomponent drug by directly mixing these nine chemical entities, which completely reproduced the effect of protecting mice from lethal septic shock. Finally, we reduced a large number of compounds within a multi-herb water extract to seven-chemical combination that exhibited superior therapeutic efficacy compared with WEH.

pH-Responsive Artesunate Polymer Prodrugs with Enhanced Ablation Effect on Rodent Xenograft Colon Cancer.

PURPOSE: In this study, pH-sensitive poly(2-ethyl-2-oxazoline)-poly(lactic acid)-poly(ß-amino ester) (PEOz-PLA-PBAE) triblock copolymers were synthesized and were conjugated with an antimalaria drug artesunate (ART), for inhibition of a colon cancer xenograft model. METHODS: The as-prepared polymer prodrugs are tended to self-assemble into polymeric micelles in aqueous milieu, with PEOz segment as hydrophilic shell and PLA-PBAE segment as hydrophobic core. RESULTS: The pH sensitivity of the as-prepared copolymers was confirmed by acid-base titration with pKb values around 6.5. The drug-conjugated polymer micelles showed high stability for at least 96 h in PBS and 37°C, respectively. The as-prepared copolymer prodrugs showed high drug loading content, with 9.57%±1.24% of drug loading for PEOz-PLA-PBAE-ART4. The conjugated ART could be released in a sustained and pH-dependent manner, with 92% of released drug at pH 6.0 and 57% of drug released at pH 7.4, respectively. In addition, in vitro experiments showed higher inhibitory effect of the prodrugs on rodent CT-26 cells than that of free ART. Animal studies also demonstrated the enhanced inhibitory efficacy of PEOz-PLA-PBAE-ART2 micelles on the growth of rodent xenograft tumor. CONCLUSION: The pH-responsive artesunate polymer prodrugs are promising candidates for colon cancer adjuvant therapy.

Rapid analysis of fungicides in tea infusions using ionic liquid immobilized fabric phase sorptive extraction with the assistance of surfactant fungicides analysis using IL-FPSE assisted with surfactant.

A green, simple, inexpensive, and sensitive ionic liquid immobilized fabric phase sorptive extraction method coupled with high performance liquid chromatography was developed for rapid screening and simultaneous determination of four fungicides (azoxystrobin, chlorothalonil, cyprodinil and trifloxystrobin) residues in tea infusions. This IL modified extraction fiber is capable of extracting target analytes directly from complicated tea water matrices with the addition of surfactant. A series of extraction conditions were investigated by one-factor-at-a-time approach and orthogonal test. After a series experiments, the optimum conditions were found to be 10% [HIMIM]NTf2 as coating solution, 2min vortex time, 500µL acetonitrile as dispersive solvent and 2min desorption time. Under the above conditions, the proposed technique was applied to detect fungicides from real tea water samples with satisfactory results.

Dispersive liquid-liquid microextraction based on the solidification of deep eutectic solvent for the determination of benzoylureas in environmental water samples.

We present a novel dispersive liquid-liquid microextraction method based on the solidification of deep eutectic solvent coupled with high-performance liquid chromatography with a variable-wavelength detection for the detection of five benzoylureas in real water samples. In this work, a green solvent consisting of 1-octyl-3-methylimidazolium chloride and 1-dodecanol was used as an extraction solvent, yielding the advantages of material stability, low density, and a suitable freezing point near room temperature. Parameters that significantly affect extraction efficiency were optimized by the one-factor-at-a-time approach. Under optimal conditions, the recoveries of five target compounds were obtained ranging from 87.39 to 98.05% with correlation coefficients ranging from 0.9994 to 0.9997 for pure water. The limits of detection were in the range of 0.09-0.16 µg/L. The enrichment factors were in the range of 171-188. Linearities were achieved in the range of 0.5-500 µg/L. The proposed method was successfully applied to determine benzoylureas in environmental water samples with a satisfactory recovery of approximately 81.38-97.67%.

Ultrasound-assisted, hybrid ionic liquid, dispersive liquid-liquid microextraction for the determination of insecticides in fruit juices based on partition coefficients.

An ultrasound-assisted, hybrid ionic liquid, dispersive liquid-liquid microextraction method coupled to high-performance liquid chromatography with a variable-wavelength detector was developed to detect ten insecticides, including diflubenzuron, triflumuron, hexaflumuron, flufenoxuron, lufenuron, diafenthiuron, transfluthrin, fenpropathrin, γ-cyhalothrin and deltamethrin, in fruit juices. In this method, an appropriate extraction solvent was chosen based on the partition coefficient of the target compounds. A mixture of 1-octyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide was used as the extractant. The extraction efficiency was screened using Plackett-Burman design and optimized using central composite design. Under the optimal conditions, good linearity was obtained for all the analytes in the pure water model and the fruit juice samples. In pure water, the recoveries of the ten insecticides ranged from 85.7 to 108.9%, with relative standard deviations for one day ranging from 1.24 to 2.64%. The limits of detection were in the range of 0.19-0.69 µg/L, and the enrichment factors were in the range of 123-160. The logarithm of the n-octanol/water partition coefficient in this experiment is a useful reference to select a suitable extraction solvent, and the proposed technique was applied for the analysis of ten insecticides in fruit juice with satisfactory results.

An ionic liquid-based nanofluid of titanium dioxide nanoparticles for effervescence-assisted dispersive liquid-liquid extraction for acaricide detection.

Phytophagous mites are usually considered a difficult problem for agricultural planting, and acaricides are applied to control diseases and pests. However, the overdose and misusage of acaricides causes pesticide residues. In this work, a simple and practical ionic liquid-based TiO2 nanofluid, effervescence-assisted, dispersive liquid-liquid microextraction (EA-DLLME) method was developed to detect acaricides in honey and tea by high-performance liquid chromatography (HPLC-DAD). Oleophilic TiO2 nanoparticles were synthesized by a facile solvothermal method to obtain greater stability of the nanofluid. The experimental parameters were optimized by a one-factor-at-a-time approach and included the effervescent tablet composition, ionic liquid selection, extractant composition, nanofluid volume, extraction temperature, extraction time and desorption conditions. Under the optimized conditions, the linear ranges of this proposed method were 0.5-500µgL-1, with correlation coefficients in the range of 0.9985-1.0000. The extraction efficiencies for the target analytes varied from 70.70 to 84.58%. The detection and quantitation limits were in the ranges of 0.04-0.18µgL-1 and 0.13-0.60µgL-1, respectively. The intra- and inter-day relative standard deviations (n=3) were found to range from 2.32 to 5.71%, which showed perfect repeatability. Overall, the EA-DLLME method was time-saving and environmentally friendly, with future potential for microextraction.

Magnetic mixed hemimicelles dispersive solid-phase extraction based on ionic liquid-coated attapulgite/polyaniline-polypyrrole/Fe3O4 nanocomposites for determination of acaricides in fruit juice prior to high-performance liquid chromatography-diode array detection.

In this research, a novel method using magnetic mixed hemimicelles dispersive solid-phase extraction (MMHDSPE) based on C16mimBr-coated attapulgite/polyaniline-polypyrrole/Fe3O4 (ATP/PANI-PPY/Fe3O4) nanocomposites were investigated for enrichment and separation of three acaricides in fruit juice. In this method, we combined the simplicity and speed of dispersive solid-phase extraction, the advantages of mixed hemimicelles and the facility of the phase separation of the magnetic nanoparticles to develop a simple, rapid, sensitive, and effective method for detecting target analytes from the juice samples. ATP/PANI-PPY/Fe3O4 nanocomposites were successfully synthesized using a one-pot method. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The experimental factors affecting the extraction efficiency including the sorbent type, amount of ATP/PANI-PPY/Fe3O4 nanocomposites, volume of ILs, sonication time, pH, and desorption conditions were optimized. Under the optimal conditions, good linearity was observed for all target analytes, with correlation coefficients (r2) ranging from 0.9994 to 0.9999; the limits of detection (LOD) were in the range of 0.16-0.57µgL-1, and the recoveries of analytes using the proposed method ranged between 88.67% and 95.10%. The sorbents exhibited excellent repeatability in the range of 1.83-4.24% in extracting the three target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.19-6.24% and 2.23-8.36%, respectively. The method was successfully applied to analyze fruit juice samples by rapid preconcentration of acaricides.

Effervescence-assisted dispersive solid-phase extraction using ionic-liquid-modified magnetic ß-cyclodextrin/attapulgite coupled with high-performance liquid chromatography for fungicide detection in honey and juice.

In this study, a simple effervescence-assisted dispersive solid-phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic-liquid-modified magnetic ß-cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one-factor-at-a-time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3-5.44%. The detection and quantitation limits were in the ranges of 0.07-0.38 and 0.23-1.27 µg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost-effective, environmentally friendly, and time-saving.

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples.

In this study, the superparamagnetic attapulgite/Fe3O4/polyaniline (ATP/Fe3O4/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe3O4 formed by the redox reaction between aniline and Fe (III). The ATP/Fe3O4/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe3O4/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe3O4/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r(2)) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02-0.43 µg L(-1), and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52-5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78-6.86% and 1.66-8.41%, respectively. Finally, the proposed ATP/Fe3O4/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.

Use of magnetic effervescent tablet-assisted ionic liquid dispersive liquid-liquid microextraction to extract fungicides from environmental waters with the aid of experimental design methodology.

In this work, a novel effervescence-assisted microextraction technique was proposed for the detection of four fungicides. This method combines ionic liquid-based dispersive liquid-liquid microextraction with the magnetic retrieval of the extractant. A magnetic effervescent tablet composed of Fe3O4 magnetic nanoparticles, sodium carbonate, sodium dihydrogen phosphate and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonimide) was used for extractant dispersion and retrieval. The main factors affecting the extraction efficiency were screened by a Plackett-Burman design and optimized by a central composite design. Under the optimum conditions, good linearity was obtained for all analytes in pure water model and real water samples. Just for the pure water, the recoveries were between 84.6% and 112.8%, the limits of detection were between 0.02 and 0.10 µg L(-1) and the intra-day precision and inter-day precision both are lower than 4.9%. This optimized method was successfully applied in the analysis of four fungicides (azoxystrobin, triazolone, cyprodinil, trifloxystrobin) in environmental water samples and the recoveries ranged between 70.7% and 105%. The procedure promising to be a time-saving, environmentally friendly, and efficient field sampling technique.

Pipette vial dispersive liquid-liquid microextraction combined with high-performance liquid chromatography for the determination of benzoylurea insecticide in fruit juice.

A simple, sensitive, and efficient method of using a pipette vial to perform dispersive liquid-liquid microextraction based on the solidification of floating organic droplets was coupled with high-performance liquid chromatography (HPLC) and a diode array detector for the preconcentration and analysis of four benzoylurea insecticides in fruit juice. In this method, 1-dodecanol was used as an extractant, and a snipped pipette was used as an experimental vial to simplify the procedure of collecting and separating solidified extractant. The experimental parameters were optimized using a Plackett-Burman design and one-factor-at-a-time method. Under the optimal conditions in the water model, the limits of detection for analytes varied from 0.03 to 0.28 µg/L, and the enrichment factors ranged from 147 to 206. Linearity was achieved for diflubenzuron and flufenoxuron in a range of 0.5-500 µg/L, for hexaflumuron in a range of 1-500 µg/L, and for triflumuron in a range of 5-500 µg/L. The correlation coefficients for the analytes ranged from 0.9986 to 0.9994 with recoveries of 91.4-110.9%. Finally, the developed technique was successfully applied to fruit juice samples with acceptable results. The relative standard deviations of the analytes at two spiking levels (50 and 200 µg/L) varied between 0.2 and 4.5%.

Using ß-cyclodextrin/attapulgite-immobilized ionic liquid as sorbent in dispersive solid-phase microextraction to detect the benzoylurea insecticide contents of honey and tea beverages.

A green, simple, inexpensive dispersive solid-phase microextraction method coupled with high-performance liquid chromatography was developed for rapid screening and selective recognition of benzoylurea insecticides (BUs) in honey and tea beverages. A novel adsorbent, ionic liquid (IL)-modified ß-cyclodextrin/attapulgite (ß-CD/ATP), was prepared by immobilizing IL on the surface of ß-CD/ATP. A series of demanding extraction conditions were investigated through the experimental design. Under optimum conditions, the limits of detection for the analytes varied from 0.12 to 0.21 µg L(-1). The enrichment factors ranged from 112 to 150 folds. Linearities in the range of 5-500 ng m L(-1) were achieved for four BUs, while the correlation coefficients ranged from 0.9997 to 1.0000 and the recoveries from 84.5% to 104.7%. The precision of this method for the four BUs corresponded to intra-day and inter-day RSDs% lower than 3.85%. Finally, the proposed technique was applied for the preconcentration of the BUs from real samples with satisfactory results.

ß-CD/ATP composite materials for use in dispersive solid-phase extraction to measure (fluoro)quinolone antibiotics in honey samples.

A novel sorbent (ß-CD/ATP composite) for dispersive solid-phase extraction (d-SPE) prepared by bonding ß-cyclodextrin to modified attapulgite via silane coupling was used to determine the concentrations of four (fluoro)quinolones (Qs) in honey samples. The subsequent quantification of the Qs (ciprofloxacin, norfloxacin, ofloxacin, and gatifloxacin) was accomplished using high-performance liquid chromatography (HPLC) with ultraviolet detection after the d-SPE procedure. Parameters that may influence the extraction efficiency, such as type and volume of the eluent, type and amount of the sorbent, times of the vortex and sonication process, and pH of the sample, were investigated using batch and column procedures. The optimal experimental conditions (5 mL sample at pH 3, 4 mg of ß-CD/ATP composite as the sorbent, 200 µL of 40% ammonia in methanol as the eluent, with vortex time 60s and sonication time 6 min, and no addition of salt) were obtained from this statistical evaluation. The limits of detection (LODs) were determined to the range from 0.30 to 3.95 µg L(-1). Good recoveries (83.6-88.6%) were obtained under the optimum conditions, and the relative standard deviations (RSDs), which are used to indicate reproducibility, were less than 7.4%. The method was validated with three real honey samples, and the results demonstrated that ß-CD/ATP composite possessed a high adsorption capacity for Qs. Although the LODs were slightly higher than expected, this study confirmed the possibility of using cyclodextrin grafted palygorskite in analytical applications.

Vortex-assisted magnetic ß-cyclodextrin/attapulgite-linked ionic liquid dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography for the fast determination of four fungicides in water samples.

A novel microextraction technique combining magnetic solid-phase microextraction (MSPME) with ionic liquid dispersive liquid-liquid microextraction (IL-DLLME) to determine four fungicides is presented in this work for the first time. The main factors affecting the extraction efficiency were optimized by the one-factor-at-a-time approach and the impacts of these factors were studied by an orthogonal design. Without tedious clean-up procedure, analytes were extracted from the sample to the adsorbent and organic solvent and then desorbed in acetonitrile prior to chromatographic analysis. Under the optimum conditions, good linearity and high enrichment factors were obtained for all analytes, with correlation coefficients ranging from 0.9998 to 1.0000 and enrichment factors ranging 135 and 159 folds. The recoveries for proposed approach were between 98% and 115%, the limits of detection were between 0.02 and 0.04 µg L(-1) and the RSDs changed from 2.96 to 4.16. The method was successfully applied in the analysis of four fungicides (azoxystrobin, chlorothalonil, cyprodinil and trifloxystrobin) in environmental water samples. The recoveries for the real water samples ranged between 81% and 109%. The procedure proved to be a time-saving, environmentally friendly, and efficient analytical technique.

Ionic liquid-assisted liquid-phase microextraction based on the solidification of floating organic droplets combined with high performance liquid chromatography for the determination of benzoylurea insecticide in fruit juice.

A green, simple, and efficient method, ionic liquid-assisted liquid-liquid microextraction based on the solidification of floating organic droplets (ILSFOD-LLME) collected via a bell-shaped collection device (BSCD) coupled to high performance liquid chromatography with a variable-wavelength detector, was developed for the preconcentration and analysis of seven benzoylurea insecticides (BUs) in fruit juice. In the proposed method, the low-density solvent 1-dodecanol and the ionic liquid trihexyl(tetradecyl)phosphonium hexafluorophosphate ([P14, 6, 6, 6]PF6) were used as extractant. The extraction solvent droplet was easily collected and separated by the BSCD without centrifugation. The experimental parameters were optimized by the one-factor-at-a-time approach and were followed using an orthogonal array design. The results indicated the different effects of each parameter for extraction efficiency. Under the optimal conditions in the water model, the limits of detection for the analytes varied from 0.03 to 0.28µgL(-1). The enrichment factors ranged from 160 to 246. Linearities were achieved for hexaflumuron and flufenoxuron in the range of 0.5-500µgL(-1), for triflumuron, lufenuron and diafenthiuron in the range of 1-500µgL(-1), and for diflubenzuron and chlorfluazuron in the range of 5-500µgL(-1); the correlation coefficients for the BUs ranged from 0.9960 to 0.9990 with recoveries of 75.6-113.9%. Finally, the developed technique was successfully applied to real fruit juice with acceptable results. The relative standard deviations (RSDs) of the seven BUs at two spiked levels (50 and 200µgL(-1)) varied between 0.1% and 7.3%.

Nonwoven polypropylene as a novel extractant phase holder for the determination of insecticides in environmental water samples.

In this work, a novel liquid-phase microextraction approach using nonwoven polypropylene as the extraction solvent holder was developed. Nonwoven polypropylene, a hydrophobic material, is widely used in the cleanup of oil spills. Due to its large surface area, efficient, and full extraction can be achieved. Nonwoven polypropylene containing an ionic liquid was used to extract benzoylurea insecticides (diflubenzuron, teflubenzuron, flufenoxuron, and chlorfluazuron) through vortex-assisted liquid-liquid microextraction. The parameters that affected the extraction efficiency included the type and volume of the extractant, the extraction time, the time and solvent volume for desorption and the mass and surface area of the nonwoven polypropylene. Under the optimized conditions, good linearity was obtained, with coefficients of determination greater than 0.9996, and the limit of detections of these compounds, calculated at S/N = 3, were in the range of 0.73-5.0 ng/mL. The recoveries of the four insecticides at two spiked levels ranged from 93.3 to 102.0%, with relative standard deviations of less than 4.0%. The proposed method was then successfully used for the rapid determination of benzoylurea insecticides in spiked real water samples before liquid chromatographic analysis. The procedure is simple, inexpensive, easy to execute, and can be widely used.