The impact of arbuscular mycorrhizal fungi and endophytic bacteria on peanuts under the combined pollution of cadmium and microplastics.

It remains unclear how symbiotic microbes impact the growth of peanuts when they are exposed to the pollutants cadmium (Cd) and microplastics (MPs) simultaneously. This study aimed to investigate the effects of endophytic bacteria Bacillus velezens SC60 and arbuscular mycorrhizal fungus Rhizophagus irregularis on peanut growth and rhizosphere microbial communities in the presence of Cd at 40 (Cd40) or 80 (Cd80) mg kg-1 combined without MP or the presence of low-density polyethylene (LDPE) and poly butyleneadipate-co-terephthalate (PBAT). This study assessed soil indicators, plant parameters, and Cd accumulation indicators. Results showed that the application of R. irregularis and B. velezens significantly enhanced soil organic carbon and increased Cd content under the conditions of Cd80 and MPs co-pollution. R. irregularis and B. velezens treatment increased peanut absorption and the enrichment coefficient for Cd, with predominate concentrations localized in the peanut roots, especially under combined pollution by Cd and MPs. Under treatments with Cd40 and Cd80 combined with PBAT pollution, soil microbes Proteobacteria exhibited a higher relative abundance, while Actinobacteria showed a higher relative abundance under treatments with Cd40 and Cd80 combined with LDPE pollution. In conclusion, under the combined pollution conditions of MPs and Cd, the co-treatment of R. irregularis and B. velezens effectively immobilized Cd in peanut roots, impeding its translocation to the shoot.

Myxococcus xanthus PilB interacts with c-di-GMP and modulates motility and biofilm formation.

The regulation of biofilm and motile states as alternate bacterial lifestyles has been studied extensively in flagellated bacteria, where the second messenger cyclic-di-GMP (cdG) plays a crucial role. However, much less is known about the mechanisms of such regulation in motile bacteria without flagella. The bacterial type IV pilus (T4P) serves as a motility apparatus that enables Myxococcus xanthus to move on solid surfaces. PilB, the T4P assembly ATPase, is, therefore, required for T4P-dependent motility in M. xanthus. Interestingly, T4P is also involved in the regulation of exopolysaccharide as the biofilm matrix material in this bacterium. A newly discovered cdG-binding domain, MshEN, is conserved in the N-terminus of PilB (PilBN) in M. xanthus and other bacteria. This suggests that cdG may bind to PilB to control the respective outputs that regulate biofilm development and T4P-powered motility. In this study, we aimed to validate M. xanthus PilB as a cdG effector protein. We performed a systematic mutational analysis of its cdG-binding domain to investigate its relationship with motility, piliation, and biofilm formation. Excluding those resulting in low levels of PilB protein, all other substitution mutations in PilBN resulted in pilB mutants with distinct and differential phenotypes in piliation and biofilm levels in M. xanthus. This suggests that the PilBN domain plays dual roles in modulating motility and biofilm levels, and these two functions of PilB can be dependent on and independent of each other in M. xanthus. IMPORTANCE The regulation of motility and biofilm by cyclic-di-GMP in flagellated bacteria has been extensively investigated. However, our knowledge regarding this regulation in motile bacteria without flagella remains limited. Here, we aimed to address this gap by investigating a non-flagellated bacterium with motility powered by bacterial type-IV pilus (T4P). Previous studies hinted at the possibility of Myxococcus xanthus PilB, the T4P assembly ATPase, serving as a cyclic-di-GMP effector involved in regulating both motility and biofilm. Our findings strongly support the hypothesis that PilB directly interacts with cyclic-di-GMP to act as a potential switch to promote biofilm formation or T4P-dependent motility. These results shed light on the bifurcation of PilB functions and its pivotal role in coordinating biofilm formation and T4P-mediated motility.

Discovery of Two Inhibitors of the Type IV Pilus Assembly ATPase PilB as Potential Antivirulence Compounds.

With the pressing antibiotic resistance pandemic, antivirulence has been increasingly explored as an alternative strategy against bacterial infections. The bacterial type IV pilus (T4P) is a well-documented virulence factor and an attractive target for small molecules for antivirulence purposes. The PilB ATPase is essential for T4P biogenesis because it catalyzes the assembly of monomeric pilins into the polymeric pilus filament. Here, we describe the identification of two PilB inhibitors by a high-throughput screen (HTS) in vitro and their validation as effective inhibitors of T4P assembly in vivo. We used Chloracidobacterium thermophilum PilB as a model enzyme to optimize an ATPase assay for the HTS. From a library of 2,320 compounds, benserazide and levodopa, two approved drugs for Parkinson's disease, were identified and confirmed biochemically to be PilB inhibitors. We demonstrate that both compounds inhibited the T4P-dependent motility of the bacteria Myxoccocus xanthus and Acinetobacter nosocomialis. Additionally, benserazide and levodopa were shown to inhibit A. nosocomialis biofilm formation, a T4P-dependent process. Using M. xanthus as a model, we showed that both compounds inhibited T4P assembly in a dose-dependent manner. These results suggest that these two compounds are effective against the PilB protein in vivo. The potency of benserazide and levodopa as PilB inhibitors both in vitro and in vivo demonstrate potentials of the HTS and its two hits here for the development of anti-T4P chemotherapeutics. IMPORTANCE Many bacterial pathogens use their type IV pilus (T4P) to facilitate and maintain an infection in a human host. Small-molecule inhibitors of the production or assembly of the T4P are promising for the treatment and prevention of infections by these bacteria, especially in our fight against antibiotic-resistant pathogens. Here, we report the development and implementation of a method to identify anti-T4P chemicals from compound libraries by high-throughput screen. This led to the identification and validation of two T4P inhibitors both in the test tubes and in bacteria. The discovery and validation pipeline reported here as well as the confirmation of two anti-T4P inhibitors provide new venues and leads for the development of chemotherapeutics against antibiotic-resistant infections.

Analysis of Myxococcus xanthus Vegetative Biofilms With Microtiter Plates.

The bacterium Myxococcus xanthus forms both developmental and vegetative types of biofilms. While the former has been studied on both agar plates and submerged surfaces, the latter has been investigated predominantly on agar surfaces as swarming colonies. Here we describe the development of a microplate-based assay for the submerged biofilms of M. xanthus under vegetative conditions. We examined the impacts of inoculation, aeration, and temperature to optimize the conditions for the assay. Aeration was observed to be critical for the effective development of submerged biofilms by M. xanthus, an obligate aerobic bacterium. In addition, temperature plays an important role in the development of M. xanthus submerged biofilms. It is well established that the formation of submerged biofilms by many bacteria requires both exopolysaccharide (EPS) and the type IV pilus (T4P). EPS constitutes part of the biofilm matrix that maintains and organizes bacterial biofilms while the T4P facilitates surface attachment as adhesins. For validation, we used our biofilm assay to examine a multitude of M. xanthus strains with various EPS and T4P phenotypes. The results indicate that the levels of EPS, but not of piliation, positively correlate with submerged biofilm formation in M. xanthus.

Nitrogen-Containing Compounds Enhance Light Absorption of Aromatic-Derived Brown Carbon.

The formation of secondary brown carbon (BrC) is chemically complex, leading to an unclear relationship between its molecular composition and optical properties. Here, we present an in-depth investigation of molecular-specific optical properties and aging of secondary BrC produced from the photooxidation of ethylbenzene at varied NOx levels for the first time. Due to the pronounced formation of unsaturated products, the mass absorption coefficient (MAC) of ethylbenzene secondary organic aerosols (ESOA) at 365 nm was higher than that of biogenic SOA by a factor of 10. A high NOx level ([ethylbenzene]0/[NOx]0 < 10 ppbC ppb-1) was found to significantly increase the average MAC300-700nm of ESOA by 0.29 m2 g-1. The data from two complementary high-resolution mass spectrometers and quantum chemical calculations suggested that nitrogen-containing compounds were largely responsible for the enhanced light absorption of high-NOx ESOA, and multifunctional nitroaromatic compounds (such as C8H9NO3 and C8H9NO4) were identified as important BrC chromophores. High-NOx ESOA underwent photobleaching upon direct exposure to ultraviolet light. Photolysis did not lead to the significant decomposition of C8H9NO3 and C8H9NO4, indicating that nitroaromatic compounds may serve as relatively stable nitrogen reservoirs and would effectively absorb solar radiation during the daytime.

Secondary organic aerosol formation from monocyclic aromatic hydrocarbons: insights from laboratory studies.

Monocyclic aromatic hydrocarbons (MAHs) are key anthropogenic pollutants and often dominate the volatile organic compound emissions and secondary organic aerosol (SOA) formation especially in the urban atmosphere. To evaluate the environmental impacts of SOA formed from the oxidation of MAHs (aromatic SOA), it is of great importance to elucidate their chemical composition, formation mechanism, and physicochemical properties under various atmospheric conditions. Here we seek to compile a common framework for the current studies on aromatic SOA formation and summarize the knowledge on what has been primarily learned from laboratory studies. This review begins with a brief summary of MAHs' emission characteristics, followed by an overview of atmospheric degradation mechanisms for MAHs as well as gas- and particle-phase reactions involving aromatic SOA formation. SOA formation processes highlighted in this review are complex and depend highly on environmental conditions, posing a substantial challenge for theoretical description of aromatic SOA formation. Therefore, the following issues are further discussed in detail: the response of gas-phase chemistry and aromatic SOA mass yield as well as composition to NOx levels, particle-phase reactions and molecular characterization of aromatic SOA in the presence of acidic sulfate, and physicochemical processes of SOA formation involving gas- or particle-phase water. Building on this current understanding, available experimental studies on the effects of environmental conditions were explored. A brief description of the atmospheric importance of aromatic SOA including their optical properties and health influences is also presented. Finally, we highlight the current challenges in laboratory studies and outline directions for future aromatic SOA research.

Anthropogenic-Biogenic Interactions at Night: Enhanced Formation of Secondary Aerosols and Particulate Nitrogen- and Sulfur-Containing Organics from ß-Pinene Oxidation.

Mixing of anthropogenic gaseous pollutants and biogenic volatile organic compounds impacts the formation of secondary aerosols, but still in an unclear manner. The present study explores secondary aerosol formation via the interactions between ß-pinene, O3, NO2, SO2, and NH3 under dark conditions. Results showed that aerosol yield can be largely enhanced by more than 330% by NO2 or SO2 but slightly enhanced by NH3 by 39% when the ratio of inorganic gases to ß-pinene ranged from 0 to 1.3. Joint effects of NO2 and SO2 and SO2 and NH3 existed as aerosol yields increased with NO2 but decreased with NH3 when SO2 was kept constant. Infrared spectra showed nitrogen-containing aerosol components derived from NO2 and NH3 and sulfur-containing species derived from SO2. Several particulate organic nitrates (MW 215, 229, 231, 245), organosulfates (MW 250, 264, 280, 282, 284), and nitrooxy organosulfates (MW 295, 311, 325, 327, and 343) were identified using high-resolution orbitrap mass spectrometry in NO2 and SO2 experiments, and their formation mechanism is discussed. Most of these nitrogen- and sulfur-containing species have been reported in ambient particles. Our results suggest that the complex interactions among ß-pinene, O3, NO2, SO2, and NH3 during the night might serve as a potential pathway for the formation of particulate nitrogen- and sulfur-containing organics, especially in polluted regions with both anthropogenic and biogenic influences.

High-Throughput Screen for Inhibitors of the Type IV Pilus Assembly ATPase PilB.

The bacterial type IV pilus (T4P) is a prominent virulence factor in many significant human pathogens, some of which have become increasingly antibiotic resistant. Antivirulence chemotherapeutics are considered a promising alternative to antibiotics because they target the disease process instead of bacterial viability. However, a roadblock to the discovery of anti-T4P compounds is the lack of a high-throughput screen (HTS) that can be implemented relatively easily and economically. Here, we describe the first HTS for the identification of inhibitors specifically against the T4P assembly ATPase PilB in vitroChloracidobacterium thermophilum PilB (CtPilB) had been demonstrated to have robust ATPase activity and the ability to bind its expected ligands in vitro. We utilized CtPilB and MANT-ATP, a fluorescent ATP analog, to develop a binding assay and adapted it for an HTS. As a proof of principle, we performed a pilot screen with a small compound library of kinase inhibitors and identified quercetin as a PilB inhibitor in vitro Using Myxococcus xanthus as a model bacterium, we found quercetin to reduce its T4P-dependent motility and T4P assembly in vivo. These results validated our HTS as effective in identifying PilB inhibitors. This assay may prove valuable in seeking leads for the development of antivirulence chemotherapeutics against PilB, an essential and universal component of all bacterial T4P systems.IMPORTANCE Many bacterial pathogens use their type IV pili (T4P) to facilitate and maintain infection of a human host. Small chemical compounds that inhibit the production or assembly of T4P hold promise in the treatment and prevention of infections, especially in the era of increasing threats from antibiotic-resistant bacteria. However, few chemicals are known to have inhibitory or anti-T4P activity. Their identification has not been easy due to the lack of a method for the screening of compound collections or libraries on a large scale. Here, we report the development of an assay that can be scaled up to screen compound libraries for inhibitors of a critical T4P assembly protein. We further demonstrate that it is feasible to use whole cells to examine potential inhibitors for their activity against T4P assembly in a bacterium.

Effects of NOx and SO2 on the secondary organic aerosol formation from the photooxidation of 1,3,5-trimethylbenzene: A new source of organosulfates.

1,3,5-Trimethylbeneze (TMB) is an important constituent of anthropogenic volatile organic compounds that contributes to the formation of secondary organic aerosol (SOA). A series of chamber experiments were performed to probe the effects of NOx and SO2 on SOA formation from TMB photooxidation. The molecular composition of TMB SOA was investigated by ultra-high performance liquid chromatography/electrospray ionization high-resolution quadrupole time-of-flight mass spectrometry (UPLC/ESI-HR-Q-TOFMS). We found that the SOA yield increases notably with elevated NOx concentrations under low-NOx condition ([TMB]0/[NOx]0 > 10 ppbC ppb-1), while an opposite trend is observed in high-NOx experiments ([TMB]0/[NOx]0 < 10 ppbC ppb-1). The increase in SOA yield in low-NOx regime is attributed to the increase of NOx-induced OH concentrations. The formation of low-volatility species might be suppressed, thereby leading to a lower SOA yield in high-NOx conditions. Moreover, SOA formation was promoted in experiment with SO2 addition. Multifunctional products containing carbonyl, acid, alcohol, and nitrate functional groups were characterized in TMB/NOx photooxidation, whereas several organosulfates (OSs) and nitrooxy organosulfates were identified in TMB/NOx/SO2 photooxidation based on HR-Q-TOFMS analysis. The formation mechanism relevant to the detected compounds in SOA were proposed. Based on our measurements, the photooxidation of TMB in the presence of SO2 may be a new source of OSs in the atmosphere. The results presented here also deepen the understanding of SOA formation under relatively complex polluted environments.

Effect of NOx and SO2 on the photooxidation of methylglyoxal: Implications in secondary aerosol formation.

Methylglyoxal (CH3COCHO, MG), which is one of the most abundant α-dicarbonyl compounds in the atmosphere, has been reported as a major source of secondary organic aerosol (SOA). In this work, the reaction of MG with hydroxyl radicals was studied in a 500 L smog chamber at (293 ± 3) K, atmospheric pressure, (18 ± 2)% relative humidity, and under different NOx and SO2. Particle size distribution was measured by using a scanning mobility particle sizer (SMPS) and the results showed that the addition of SO2 can promote SOA formation, while different NOx concentrations have different influences on SOA production. High NOx suppressed the SOA formation, whereas the particle mass concentration, particle number concentration and particle geometric mean diameter increased with the increasing NOx concentration at low NOx concentration in the presence of SO2. In addition, the products of the OH-initiated oxidation of MG and the functional groups of the particle phase in the MG/OH/SO2 and MG/OH/NOx/SO2 reaction systems were detected by gas chromatography mass spectrometry (GC-MS) and attenuated total reflection fourier transformed infrared spectroscopy (ATR-FTIR) analysis. Two products, glyoxylic acid and oxalic acid, were detected by GC-MS. The mechanism of the reaction of MG and OH radicals that follows two main pathways, H atom abstraction and hydration, is proposed. Evidence is provided for the formation of organic nitrates and organic sulfate in particle phase from IR spectra. Incorporation of NOx and SO2 influence suggested that SOA formation from anthropogenic hydrocarbons may be more efficient in polluted environment.

Cyclic-di-GMP and ADP bind to separate domains of PilB as mutual allosteric effectors.

PilB is the assembly ATPase for the bacterial type IV pilus (T4P), and as a consequence, it is essential for T4P-mediated bacterial motility. In some cases, PilB has been demonstrated to regulate the production of exopolysaccharide (EPS) during bacterial biofilm development independently of or in addition to its function in pilus assembly. While the ATPase activity of PilB resides at its C-terminal region, the N terminus of a subset of PilBs forms a novel cyclic-di-GMP (cdG)-binding domain. This multi-domain structure suggests that PilB binds cdG and adenine nucleotides through separate domains which may influence the functionality of PilB in both motility and biofilm development. Here, Chloracidobacterium thermophilum PilB is used to investigate ligand binding by its separate domains and by the full-length protein. Our results confirm the specificity of these individual domains for their respective ligands and demonstrate communications between these domains in the full-length protein. It is clear that when the N- and the C-terminal domains of PilB bind to cdG and ADP, respectively, they mutually influence each other in conformation and in their binding to ligands. We propose that the interactions between these domains in response to their ligands play critical roles in modulating or controlling the functions of PilB as a regulator of EPS production and as the T4P assembly ATPase.

Construction and Use of Transposon MycoTetOP 2 for Isolation of Conditional Mycobacteria Mutants.

Mycobacteria are unique in many aspects of their biology. The development of genetic tools to identify genes critical for their growth by forward genetic analysis holds great promises to advance our understanding of their cellular, physiological and biochemical processes. Here we report the development of a novel transposon, MycoTetOP 2, to aid the identification of such genes by direct transposon mutagenesis. This mariner-based transposon contains nested anhydrotetracycline (ATc)-inducible promoters to drive transcription outward from both of its ends. In addition, it includes the Escherichia coli R6Kγ origin to facilitate the identification of insertion sites. MycoTetOP 2 was placed in a shuttle plasmid with a temperature-sensitive DNA replication origin in mycobacteria. This allows propagation of mycobacteria harboring the plasmid at a permissive temperature. The resulting population of cells can then be subjected to a temperature shift to select for transposon mutants. This transposon and its delivery system, once constructed, were tested in the fast-growing model Mycobacterium smegmatis and 13 mutants with ATc-dependent growth were isolated. The identification of the insertion sites in these mutants led to nine unique genetic loci with genes critical for essential processes in both M. smegmatis and Mycobacterium tuberculosis. These results demonstrate that MycoTetOP 2 and its delivery vector provide valuable tools for the studies of mycobacteria by forward genetics.

The type IV pilus assembly motor PilB is a robust hexameric ATPase with complex kinetics.

The bacterial type IV pilus (T4P) is a versatile nanomachine that functions in pathogenesis, biofilm formation, motility, and horizontal gene transfer. T4P assembly is powered by the motor ATPase PilB which is proposed to hydrolyze ATP by a symmetrical rotary mechanism. This mechanism, which is deduced from the structure of PilB, is untested. Here, we report the first kinetic studies of the PilB ATPase, supporting co-ordination among the protomers of this hexameric enzyme. Analysis of the genome sequence of Chloracidobacterium thermophilum identified a pilB gene whose protein we then heterologously expressed. This PilB formed a hexamer in solution and exhibited highly robust ATPase activity. It displays complex steady-state kinetics with an incline followed by a decline over an ATP concentration range of physiological relevance. The incline is multiphasic and the decline signifies substrate inhibition. These observations suggest that variations in intracellular ATP concentrations may regulate T4P assembly and T4P-mediated functions in vivo in accordance with the physiological state of bacteria with unanticipated complexity. We also identified a mutant pilB gene in the genomic DNA of C. thermophilum from an enrichment culture. The mutant PilB variant, which is significantly less active, exhibited similar inhibition of its ATPase activity by high concentrations of ATP. Our findings here with the PilB ATPase from C. thermophilum provide the first line of biochemical evidence for the co-ordination among PilB protomers consistent with the symmetrical rotary model of catalysis based on structural studies.

The type IV pilus assembly ATPase PilB functions as a signaling protein to regulate exopolysaccharide production in Myxococcus xanthus.

Myxococcus xanthus possesses a form of surface motility powered by the retraction of the type IV pilus (T4P). Additionally, exopolysaccharide (EPS), the major constituent of bacterial biofilms, is required for this T4P-mediated motility in M. xanthus as the putative trigger of T4P retraction. The results here demonstrate that the T4P assembly ATPase PilB functions as an intermediary in the EPS regulatory pathway composed of the T4P upstream of the Dif signaling proteins in M. xanthus. A suppressor screen isolated a pilB mutation that restored EPS production to a T4P- mutant. An additional PilB mutant variant, which is deficient in ATP hydrolysis and T4P assembly, supports EPS production without the T4P, indicating PilB can regulate EPS production independently of its function in T4P assembly. Further analysis confirms that PilB functions downstream of the T4P filament but upstream of the Dif proteins. In vitro studies suggest that the nucleotide-free form of PilB assumes the active signaling conformation in EPS regulation. Since M. xanthus PilB possesses conserved motifs with high affinity for c-di-GMP binding, the findings here suggest that c-di-GMP can regulate both motility and biofilm formation through a single effector in this surface-motile bacterium.

Using a Concept Inventory to Reveal Student Thinking Associated with Common Misconceptions about Antibiotic Resistance.

Misconceptions, also known as alternate conceptions, about key concepts often hinder the ability of students to learn new knowledge. Concept inventories (CIs) are designed to assess students' understanding of key concepts, especially those prone to misconceptions. Two-tiered CIs include prompts that ask students to explain the logic behind their answer choice. Such two-tiered CIs afford an opportunity for faculty to explore the student thinking behind the common misconceptions represented by their choice of a distractor. In this study, we specifically sought to probe the misconceptions that students hold prior to beginning an introductory microbiology course (i.e., preconceptions). Faculty-learning communities at two research-intensive universities used the validated Host-Pathogen Interaction Concept Inventory (HPI-CI) to reveal student preconceptions. Our method of deep analysis involved communal review and discussion of students' explanations for their CI answer choice. This approach provided insight valuable for curriculum development. Here the process is illustrated using one question from the HPI-CI related to the important topic of antibiotic resistance. The frequencies with which students chose particular multiple-choice responses for this question were highly correlated between institutions, implying common underlying misconceptions. Examination of student explanations using our analysis approach, coupled with group discussions within and between institutions, revealed patterns in student thinking to the participating faculty. Similar application of a two-tiered concept inventory by general microbiology instructors, either individually or in groups, at other institutions will allow them to better understand student thinking related to key concepts in their curriculum.

Crystal Structure of a Type IV Pilus Assembly ATPase: Insights into the Molecular Mechanism of PilB from Thermus thermophilus.

Type IV pili (T4P) mediate bacterial motility and virulence. The PilB/GspE family ATPases power the assembly of T4P and type 2 secretion systems. We determined the structure of the ATPase region of PilB (PilBATP) in complex with ATPγS to provide a model of a T4P assembly ATPase and a view of a PilB/GspE family hexamer at better than 3-Šresolution. Spatial positioning and conformations of the protomers suggest a mechanism of force generation. All six PilBATP protomers contain bound ATPγS. Two protomers form a closed conformation poised for ATP hydrolysis. The other four molecules assume an open conformation but separate into two pairs with distinct active-site accessibilities. We propose that one pair represents the post-hydrolysis phase while the other pair appears poised for ADP/ATP exchange. Collectively, the data suggest that T4P assembly is powered by coordinating concurrent substrate binding with ATP hydrolysis across the PilB hexamer.

Polysiloxane-Modified Tetraphenylethene: Synthesis, AIE Properties, and Sensor for Detecting Explosives.

Polysiloxane-modified tetraphenylethene (PTPESi) is successfully synthesized by attaching tetraphenylethene (TPE) units onto methylvinyldiethoxylsiloxane and subsequent polycondensation. Introducing polysiloxane into TPE has minimal effect on the photophysical properties and aggregation-induced emission behavior of TPE. The highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energy levels of PTPESi are located mainly on the tetraphenylethene moieties. The fluorescence intensity and the half width of the emission peak of PTPESi before and after annealing at 120 °C for 12 h are nearly the same, indicating high thermal stability and morphological stability. In addition, use of PTPESi film as a sensor toward the vapor-phase detection of explosives is also studied and it displays quite high fluorescence quenching efficiency and good reversibility.

Targeting PD-1 and Tim-3 Pathways to Reverse CD8 T-Cell Exhaustion and Enhance Ex Vivo T-Cell Responses to Autologous Dendritic/Tumor Vaccines.

The paradoxical coexistence of spontaneous tumor antigen-specific immune response with progressive disease in cancer patients need to dissect the molecular pathways involved in tumor-induced T-cell dysfunction or exhaustion. Programmed cell death 1 (PD-1) has been identified as a marker of exhausted T cells in chronic disease states, and blockade of PD-1-PD-L1 interactions has been shown to partially restore T-cell function. We have found that T-cell immunoglobulin mucin (Tim) 3 is expressed on CD8+ tumor-infiltrating lymphocytes (TILs) isolated from patients with colorectal cancer. All T-cell immunoglobulin mucin 3 (Tim-3+) TILs coexpress PD-1, and Tim-3+ PD-1+ CD8+ TILs represent the predominant fraction of Tcells infiltrating tumors. Tim-3+PD-1+ CD8+ TILs exhibit the most severe exhausted phenotype as defined by failure to produce cytokines, such as interferon-γ, tumor necrosis factor-α, and interleukin-2. We further find that combined targeting of the Tim-3 and PD-1 pathways increased the frequencies of not only interferon-γ and tumor necrosis factor-α but also frequencies of proliferating tumor antigen-specific CD8+ T cells than targeting either pathway alone. A concomitant decrease in regulatory T cells and enhanced killing in a cytotoxicity assay was observed. Collectively, our findings support the use of Tim-3-Tim-3L blockade together with PD-1-PD-L1 blockade to reverse tumor-induced T-cell exhaustion/dysfunction in patients with colorectal cancer.

The orphan response regulator EpsW is a substrate of the DifE kinase and it regulates exopolysaccharide in Myxococcus xanthus.

Here we attempted to identify the downstream target of the DifE histidine kinase in the regulation of exopolysaccharide (EPS) production in the Gram-negative bacterium Myxococcus xanthus. This bacterium is an important model system for the studies of Type IV pilus (T4P) because it is motile by social (S) motility which is powered by T4P retraction. EPS is critical for S motility because it is the preferred anchor for T4P retraction in this bacterium. Previous studies identified the Dif chemosensory pathway as crucial for the regulation of EPS production. However, the downstream target of the DifE kinase in this pathway was unknown. In this study, EpsW, an orphan and single-domain response regulator (RR), was identified as a potential DifE target first by bioinformatics. Subsequent experiments demonstrated that epsW is essential for EPS biosynthesis in vivo and that EpsW is directly phosphorylated by DifE in vitro. Targted mutagenesis of epsW suggests that EpsW is unlikely the terminal RR of the Dif pathway. We propose instead that EpsW is an intermediary in a multistep phosphorelay that regulates EPS in M. xanthus.

The Hsp70-like StkA functions between T4P and Dif signaling proteins as a negative regulator of exopolysaccharide in Myxococcus xanthus.

Myxococcus xanthus displays a form of surface motility known as social (S) gliding. It is mediated by the type IV pilus (T4P) and requires the exopolysaccharide (EPS) to function. It is clear that T4P retraction powers S motility. EPS on a neighboring cell or deposited on a gliding surface is proposed to anchor the distal end of a pilus and trigger T4P retraction at its proximal end. Inversely, T4P has been shown to regulate EPS production upstream of the Dif signaling pathway. Here we describe the isolation of two Tn insertions at the stk locus which had been known to play roles in cellular cohesion and formation of cell groups. An insertion in stkA (MXAN_3474) was identified based on its ability to restore EPS to a pilA deletion mutant. The stkA encodes a DnaK or Hsp70 homolog and it is upstream of stkB (MXAN_3475) and stkC (MXAN_3476). A stkB insertion was identified in a separate genetic screen because it eliminated EPS production of an EPS(+) parental strain. Our results with in-frame deletions of these three stk genes indicated that the stkA mutant produced increased level of EPS while stkB and stkC mutants produced less EPS relative to the wild type. S motility and developmental aggregation were affected by deletions of stkA and stkB but only minimally by the deletion of stkC. Genetic epistasis indicated that StkA functions downstream of T4P but upstream of the Dif proteins as a negative regulator of EPS production in M. xanthus.