Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries.

The solid electrolyte interphase (SEI) with lithium fluoride (LiF) is critical to the performance of lithium metal batteries (LMBs) due to its high stability and mechanical properties. However, the low Li ion conductivity of LiF impedes the rapid diffusion of Li ions in the SEI, which leads to localized Li ion oversaturation dendritic deposition and hinders the practical applications of LMBs at high-current regions (>3 C). To address this issue, a fluorophosphated SEI rich with fast ion-diffusing inorganic grain boundaries (LiF/Li3P) is introduced. By utilizing a sol electrolyte that contains highly dispersed porous LiF nanoparticles modified with phosphorus-containing functional groups, a fluorophosphated SEI is constructed and the presence of electrochemically active Li within these fast ion-diffusing grain boundaries (GBs-Li) that are non-nucleated is demonstrated, ensuring the stability of the Li || NCM811 cell for over 1000 cycles at fast-charging rates of 5 C (11 mA cm-2). Additionally, a practical, long cycling, and intrinsically safe LMB pouch cell with high energy density (400 Wh kg-1) is fabricated. The work reveals how SEI components and structure design can enable fast-charging LMBs.

Dimensional and Doping Engineering of Chiral Perovskites with Enhanced Spin Selectivity for Green Emissive Spin Light-Emitting Diodes.

Chiral perovskites play a pivotal role in spintronics and optoelectronic systems attributed to their chiral-induced spin selectivity (CISS) effect. Specifically, they allow for spin-polarized charge transport in spin light-emitting diodes (LEDs), yielding circularly polarized electroluminescence at room temperature without external magnetic fields. However, chiral lead bromide-based perovskites have yet to achieve high-performance green emissive spin-LEDs, owing to limited CISS effects and charge transport. Herein, we employ dimensional regulation and Sn2+-doping to optimize chiral bromide-based perovskite architecture for green emissive spin-LEDs. The optimized (PEA)x(S/R-PRDA)2-xSn0.1Pb0.9Br4 chiral perovskite film exhibits an enhanced CISS effect, higher hole mobility, and better energy level alignment with the emissive layer. These improvements allow us to fabricate green emissive spin-LEDs with an external quantum efficiency (EQE) of 5.7% and an asymmetry factor |gCP-EL| of 1.1 × 10-3. This work highlights the importance of tailored perovskite architectures and doping strategies in advancing spintronics for optoelectronic applications.

Short-branched alkyl sulfobetaine-passivated CsPbBr3 nanocrystals for efficient green light emitting diodes.

Inorganic cesium lead bromide nanocrystals (CsPbBr3 NCs) hold promising prospects for high performance green light-emitting diodes (LEDs) due to their exceptional color purity and high luminescence efficiency. However, the common ligands employed for passivating these indispensable NCs, such as long-chain organic ligands like oleic acid and oleylamine (OA/OAm), display highly dynamic binding and electronic insulating issues, thereby resulting in a low efficiency of the as-fabricated LEDs. Herein, we report a new zwitterionic short-branched alkyl sulfobetaine ligand, namely trioctyl(propyl-3-sulfonate) ammonium betaine (TOAB), to in situ passivate CsPbBr3 NCs via a feasible one-step solution synthesis, enabling efficiency improvement of CsPbBr3 NC-based LEDs. The zwitterionic TOAB ligand not only strengthened the surface passivation of CsPbBr3 NCs with a high photoluminescence quantum yield (PLQY) of 97%, but also enhanced the carrier transport in the fabricated CsPbBr3 NC thin films due to the short-branched alkyl design. Consequently, CsPbBr3 NCs passivated with TOAB achieved a green LED with an external quantum efficiency (EQE) of 7.3% and a maximum luminance of 5716 cd m-2, surpassing those of LEDs based on insulating long-chain ligand-passivated NCs. Our work provides an effective surface passivation ligand design to enhance the performance of CsPbBr3 NC-based LEDs.

Halide Superionic Conductors with Non-Close-Packed Anion Frameworks.

Halide superionic conductors (SICs) are drawing significant research attention for their potential applications in all-solid-state batteries. A key challenge in developing such SICs is to explore and design halide structural frameworks that enable rapid ion movement. In this work, we show that the close-packed anion frameworks shared by traditional halide ionic conductors face intrinsic limitations in fast ion conduction, regardless of structural regulation. Beyond the close-packed anion frameworks, we identify that the non-close-packed anion frameworks have great potential to achieve superionic conductivity. Notably, we unravel that the non-close-packed UCl3-type framework exhibit superionic conductivity for a diverse range of carrier ions, including Li+, Na+, K+, and Ag+, which are validated through both ab initio molecular dynamics simulations and experimental measurements. We elucidate that the remarkable ionic conductivity observed in the UCl3-type framework structure stems from its significantly more distorted site and larger diffusion channel than its close-packed counterparts. By employing the non-close-packed anion framework as the key feature for high-throughput computational screening, we also identify LiGaCl3 as a promising candidate for halide SICs. These discoveries provide crucial insights for the exploration and design of novel halide SICs.

Helical-caging enables single-emitted large asymmetric full-color circularly polarized luminescence.

Colorful circularly polarized luminescence materials are desired for 3D displays, information security and asymmetric synthesis, in which single-emitted materials are ideal owing to self-absorption avoidance, evenly entire-visible-spectrum-covered photon emission and facile device fabrication. However, restricted by the synthesis of chiral broad-luminescent emitters, the realization and application of high-performing single-emitted full-color circularly polarized luminescence is in its infancy. Here, we disclose a single-emitted full-color circularly polarized luminescence system (spiral full-color emission generator), composed of whole-vis-spectrum emissive quantum dots and chiral liquid crystals. The system achieves a maximum luminescence dissymmetry factor of 0.8 and remains an order of 10-1 in visible region by tuning its photonic bandgap. We then expand it to a series of desired customized-color circularly polarized luminescence, build chiral devices and further demonstrate the working scenario in the photoinduced enantioselective polymerization. This work contributes to the design and synthesis of efficient chiroptical materials, device fabrication and photoinduced asymmetric synthesis.

Amorphous Chloride Solid Electrolytes with High Li-Ion Conductivity for Stable Cycling of All-Solid-State High-Nickel Cathodes.

Solid electrolytes (SEs) are central components that enable high-performance, all-solid-state lithium batteries (ASSLBs). Amorphous SEs hold great potential for ASSLBs because their grain-boundary-free characteristics facilitate intact solid-solid contact and uniform Li-ion conduction for high-performance cathodes. However, amorphous oxide SEs with limited ionic conductivities and glassy sulfide SEs with narrow electrochemical windows cannot sustain high-nickel cathodes. Herein, we report a class of amorphous Li-Ta-Cl-based chloride SEs possessing high Li-ion conductivity (up to 7.16 mS cm-1) and low Young's modulus (approximately 3 GPa) to enable excellent Li-ion conduction and intact physical contact among rigid components in ASSLBs. We reveal that the amorphous Li-Ta-Cl matrix is composed of LiCl43-, LiCl54-, LiCl65- polyhedra, and TaCl6- octahedra via machine-learning simulation, solid-state 7Li nuclear magnetic resonance, and X-ray absorption analysis. Attractively, our amorphous chloride SEs exhibit excellent compatibility with high-nickel cathodes. We demonstrate that ASSLBs comprising amorphous chloride SEs and high-nickel single-crystal cathodes (LiNi0.88Co0.07Mn0.05O2) exhibit ∼99% capacity retention after 800 cycles at ∼3 C under 1 mA h cm-2 and ∼80% capacity retention after 75 cycles at 0.2 C under a high areal capacity of 5 mA h cm-2. Most importantly, a stable operation of up to 9800 cycles with a capacity retention of ∼77% at a high rate of 3.4 C can be achieved in a freezing environment of -10 °C. Our amorphous chloride SEs will pave the way to realize high-performance high-nickel cathodes for high-energy-density ASSLBs.

Mitigating halide ion migration by resurfacing lead halide perovskite nanocrystals for stable light-emitting diodes.

Lead halide perovskite nanocrystals are promising for next-generation high-definition displays, especially in light of their tunable bandgaps, high color purities, and high carrier mobility. Within the past few years, the external quantum efficiency of perovskite nanocrystal-based light-emitting diodes has progressed rapidly, reaching the standard for commercial applications. However, the low operational stability of these perovskite nanocrystal-based light-emitting diodes remains a crucial issue for their industrial development. Recent experimental evidence indicates that the migration of ionic species is the primary factor giving rise to the performance degradation of perovskite nanocrystal-based light-emitting diodes, and ion migration is closely related to the defects on the surface of perovskite nanocrystals and at the grain boundaries of their thin films. In this review, we focus on the central idea of surface reconstruction of perovskite nanocrystals, discuss the influence of surface defects on halide ion migration, and summarize recent advances in resurfacing perovskite nanocrystal strategies toward mitigating halide ion migration to improve the stability of the as-fabricated light-emitting diode devices. From the perspective of perovskite nanocrystal resurfacing, we set out a promising research direction for improving both the spectral and operational stability of perovskite nanocrystal-based light-emitting diodes.

Pseudohalogen Resurfaced CsPbBr3 Nanocrystals for Bright, Efficient, and Stable Green-Light-Emitting Diodes.

Lead halide perovskite nanocrystals (LHP NCs) are regarded as promising emitters for next-generation ultrahigh-definition displays due to their high color purity and wide color gamut. Recently, the external quantum efficiency (EQE) of LHP NC based light-emitting diodes (PNC LEDs) has been rapidly improved to a level required by practical applications. However, the poor operational stability of the device, caused by halide ion migration at the grain boundary of LHP NC thin films, remains a great challenge. Herein, we report a resurfacing strategy via pseudohalogen ions to mitigate detrimental halide ion migration, aiming to stabilize PNC LEDs. We employ a thiocyanate solution processed post-treatment method to efficiently resurface CsPbBr3 NCs and demonstrate that the thiocyanate ions can effectively inhibit bromide ion migration in LHP NC thin films. Owing to thiocyanate resurfacing, we fabricated LEDs with a high EQE of 17.3%, a maximum brightness of 48000 cd m-2, and an excellent operation half-life time.

A LaCl3-based lithium superionic conductor compatible with lithium metal.

Inorganic superionic conductors possess high ionic conductivity and excellent thermal stability but their poor interfacial compatibility with lithium metal electrodes precludes application in all-solid-state lithium metal batteries1,2. Here we report a LaCl3-based lithium superionic conductor possessing excellent interfacial compatibility with lithium metal electrodes. In contrast to a Li3MCl6 (M = Y, In, Sc and Ho) electrolyte lattice3-6, the UCl3-type LaCl3 lattice has large, one-dimensional channels for rapid Li+ conduction, interconnected by La vacancies via Ta doping and resulting in a three-dimensional Li+ migration network. The optimized Li0.388Ta0.238La0.475Cl3 electrolyte exhibits Li+ conductivity of 3.02 mS cm-1 at 30 °C and a low activation energy of 0.197 eV. It also generates a gradient interfacial passivation layer to stabilize the Li metal electrode for long-term cycling of a Li-Li symmetric cell (1 mAh cm-2) for more than 5,000 h. When directly coupled with an uncoated LiNi0.5Co0.2Mn0.3O2 cathode and bare Li metal anode, the Li0.388Ta0.238La0.475Cl3 electrolyte enables a solid battery to run for more than 100 cycles with a cutoff voltage of 4.35 V and areal capacity of more than 1 mAh cm-2. We also demonstrate rapid Li+ conduction in lanthanide metal chlorides (LnCl3; Ln = La, Ce, Nd, Sm and Gd), suggesting that the LnCl3 solid electrolyte system could provide further developments in conductivity and utility.

Multiphoton Ionization Reduction of Atoms in Two-Color Femtosecond Laser Fields.

We report the ionization reduction of atoms in two-color femtosecond laser fields in this joint theoretical-experimental study. For the multiphoton ionization of atoms using a 400 nm laser pulse, the ionization probability is reduced if another relatively weak 800 nm laser pulse is overlapped. Such ionization reduction consistently occurs regardless of the relative phase between the two pulses. The time-dependent Schrödinger equation simulation results indicate that with the assisted 800 nm photons the electron can be launched to Rydberg states with large angular quantum numbers, which stand off the nuclei and thus are hard to be freed in the multiphoton regime. This mechanism works for hydrogen, helium, and probably some other atoms if two-color laser fields are properly tuned.

Multimodal-Responsive Circularly Polarized Luminescence Security Materials.

Nations, industries, and aspects of everyday life have undergone forgery and counterfeiting ever since the emergence of commercialization. Securing documents and products with anticounterfeit additives shows promise for authentication, allowing one to combat ever-increasing global counterfeiting. One most-used effective encryption strategy is to combine with optical-security markers on the required protection objects; however, state-of-the-art labels still suffer from imitation due to their poor complexity and easy forecasting, as a result of deterministic production. Developing advanced anticounterfeiting tags with unusual optical characters and further incorporating complex security features are desired to achieve multimodal, unbreakable authentication capacity; unfortunately, this has not yet been achieved. Here, we prepare a series of stable circularly polarized luminescence (CPL) materials, composed of toxicity-free, high-quality-emitting inorganic quantum dots (QDs) and liquid crystals, using a designed helical-coassembly strategy. This CPL system achieves a figure of merit (FM, assessing the performance of both luminescence dissymmetry and quantum yield) value of 0.39, fulfilling practical demands for anticounterfeiting applications. Based on these CPL structures, we produce a type of multimodal-responsive security materials (MRSMs) that exhibits six different stimuli-responsive modes, including light activation, polarization, temperature, voltage, pressure, and view angle. Thus, we show a proof-of-principle blockchain-like integrated anticounterfeiting system, allowing multimodal-responsive, interactive/changeable information encryption-decryption. We further encapsulate the obtained security materials into a fiber to expand our materials to work on flexible fabrics, that is, building an intelligent textile with a color-adaptable function along with environmental change.

Planar defect-free pure red perovskite light-emitting diodes via metastable phase crystallization.

Solution-processable all-inorganic CsPbI3-xBrx perovskite holds great potential for pure red light-emitting diodes. However, the widely existing defects in this mixed halide perovskite markedly limit the efficiency and stability of present light-emitting diode devices. We here identify that intragrain Ruddlesden-Popper planar defects are primary forms of such defects in the CsPbI3-xBrx thin film owing to the lattice strain caused by inhomogeneous halogen ion distribution. To eliminate these defects, we develop a stepwise metastable phase crystallization strategy to minimize the CsPbI3-xBrx perovskite lattice strain, which brings planar defect-free CsPbI3-xBrx thin film with improved radiative recombination, narrowed emission band, and enhanced spectral stability. Using these high-quality thin films, we fabricate spectrally stable pure red perovskite light-emitting diodes, showing 17.8% external quantum efficiency and 9000 candela meter-2 brightness with color coordinates required by Rec. 2020.

Thermochromic Phosphors Based on One-Dimensional Ionic Copper-Iodine Chains Showing Solid-State Photoluminescence Efficiency Exceeding 99 .

Thermochromic phosphors are intriguing materials for realizing thermochromic behaviors of light-emitting diodes. Here a highly luminescent and stable thermochromic phosphor based on one-dimensional Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 is reported. This unique ionic copper-iodine chain-based hybrid exhibits near-unity photoluminescence efficiency owing to the through-space charge-transfer character of relevant electronic transitions. More importantly, an alternative mechanism of thermochromic phosphorescence was unraveled, supported by a first principles simulation of concerted copper atom migration in the copper-iodine chain. Furthermore, we successfully fabricate a bright thermochromic light-emitting diode using this Cu4 I6 (4-dimethylamino-1-ethylpyridinium)2 thermochromic phosphor. Our reported flexible ionic copper-iodine chain-based thermochromic luminescent material represents a new type of cost-effective functional phosphor.

Superior Fast-Charging Lithium-Ion Batteries Enabled by the High-Speed Solid-State Lithium Transport of an Intermetallic Cu6 Sn5 Network.

Superior fast charging is a desirable capability of lithium-ion batteries, which can make electric vehicles a strong competition to traditional fuel vehicles. However, the slow transport of solvated lithium ions in liquid electrolytes is a limiting factor. Here, a Lix Cu6 Sn5 intermetallic network is reported to address this issue. Based on electrochemical analysis and X-ray photoelectron spectroscopy mapping, it is demonstrated that the reported intermetallic network can form a high-speed solid-state lithium transport matrix throughout the electrode, which largely reduces the lithium-ion-concentration polarization effect in the graphite anode. Employing this design, superior fast-charging graphite/lithium cobalt oxide full cells are fabricated and tested under strict electrode conditions. At the charging rate of 6 C, the fabricated full cells show a capacity of 145 mAh g-1 with an extraordinary capacity retention of 96.6%. In addition, the full cell also exhibits good electrochemical stability at a high charging rate of 2 C over 100 cycles (96.0% of capacity retention) in comparison to traditional graphite-anode-based cells (86.1% of capacity retention). This work presents a new strategy for fast-charging lithium-ion batteries on the basis of high-speed solid-state lithium transport in intermetallic alloy hosts.

Biomimetic non-classical crystallization drives hierarchical structuring of efficient circularly polarized phosphors.

Hierarchically structured chiral luminescent materials hold promise for achieving efficient circularly polarized luminescence. However, a feasible chemical route to fabricate hierarchically structured chiral luminescent polycrystals is still elusive because of their complex structures and complicated formation process. We here report a biomimetic non-classical crystallization (BNCC) strategy for preparing efficient hierarchically structured chiral luminescent polycrystals using well-designed highly luminescent homochiral copper(I)-iodide hybrid clusters as basic units for non-classical crystallization. By monitoring the crystallization process, we unravel the BNCC mechanism, which involves crystal nucleation, nanoparticles aggregation, oriented attachment, and mesoscopic transformation processes. We finally obtain the circularly polarized phosphors with both high luminescent efficiency of 32% and high luminescent dissymmetry factor of 1.5 × 10-2, achieving the demonstration of a circularly polarized phosphor converted light emitting diode with a polarization degree of 1.84% at room temperature. Our designed BNCC strategy provides a simple, reliable, and large-scale synthetic route for preparing bright circularly polarized phosphors.

Lead-Free Solid-State Organic-Inorganic Halide Perovskite Electrolyte for Lithium-Ion Conduction.

Exploring new solid electrolytes (SEs) for lithium-ion conduction is significant for the development of rechargeable all-solid-state lithium batteries. Here, a lead-free organic-inorganic halide perovskite, MASr0.8Li0.4Cl3 (MA = methylammonium, CH3NH3 in formula), is reported as a new SE for Li-ion conduction due to its highly symmetric crystal structure, inherent soft lattice, and good tolerance for composition tunability. Via density functional theory calculations, we demonstrate that the hybrid perovskite framework can allow fast Li-ion migration without the collapse of the crystal structure. The influence of the lithium content in MASr1-xLi2xCl3 (x = 0.1, 0.2, 0.3, or 0.4) on Li+ migration is systematically investigated. At the lithium content of x = 0.2, the MASr0.8Li0.4Cl3 achieves the room-temperature lithium ionic conductivity of 7.0 × 10-6 S cm-1 with a migration energy barrier of ∼0.47 eV. The lithium-tin alloy (Li-Sn) symmetric cell exhibits stable electrochemical lithium plating/stripping for nearly 100 cycles, indicating the alloy anode compatibility of the MASr0.8Li0.4Cl3 SE. This lead-free organic-inorganic halide perovskite SE will open a new avenue for exploring new SEs.

α-BaF2 Nanoparticle Substrate-Enabled γ-CsPbI3 Heteroepitaxial Growth for Efficient and Bright Deep-Red Light-Emitting Diodes.

All-inorganic CsPbI3 perovskite is attractive for deep-red light-emitting diodes (LEDs) because of its excellent carrier mobility, high color purity, and solution processability. However, the high phase transition energy barrier of optically active CsPbI3 black phase hinders the fabrication of efficient and bright LEDs. Here, we report a novel α-BaF2 nanoparticle substrate-promoted solution-processable heteroepitaxial growth to overcome this hindrance and obtain high-quality optically active γ-CsPbI3 thin films, achieving efficient and bright deep-red LEDs. We unravel that the highly exposed planes on the α-BaF2 nanoparticle-based heteroepitaxial growth substrate have a 99.5% lattice matching degree with the (110) planes of γ-CsPbI3. This ultrahigh lattice matching degree initiates solution-processed interfacial strain-free epitaxial growth of low-defect and highly oriented γ-CsPbI3 thin films on the substrate. The obtained γ-CsPbI3 thin films are uniform, smooth, and highly luminescent, based on which we fabricate efficient and bright deep-red LEDs with a high peak external quantum efficiency of 14.1% and a record luminance of 1325 cd m-2.

Extremely fast-charging lithium ion battery enabled by dual-gradient structure design.

Extremely fast-charging lithium-ion batteries are highly desirable to shorten the recharging time for electric vehicles, but it is hampered by the poor rate capability of graphite anodes. Here, we present a previously unreported particle size and electrode porosity dual-gradient structure design in the graphite anode for achieving extremely fast-charging lithium ion battery under strict electrode conditions. We develop a polymer binder-free slurry route to construct this previously unreported type particle size-porosity dual-gradient structure in the practical graphite anode showing the extremely fast-charging capability with 60% of recharge in 10 min. On the basis of dual-gradient graphite anode, we demonstrate extremely fast-charging lithium ion battery realizing 60% recharge in 6 min and high volumetric energy density of 701 Wh liter-1 at the high charging rate of 6 C.

Trace Doping of Multiple Elements Enables Stable Cycling of High Areal Capacity LiNi0.5 Mn1.5 O4 Cathode.

High-voltage spinel cobalt-free LiNi0.5 Mn1.5 O4 (LNMO) is one of the most promising cathode candidates for next-generation lithium-ion batteries (LIBs) due to its high specific capacity, high operating voltage, and low cost. However, inferior electronic conductivity, transition metal dissolution, and fast capacity degradation of LNMO, especially in high mass loading for high areal capacity, are the critical material challenges for its practical application. Herein, trace multiple Cr-Fe-Cu elements doping of LiNi0.45 Cr0.0167 Fe0.0167 Cu0.0167 Mn1.5 O4 (CFC0.5-LNMO) cathode is achieved by a blow-spinning strategy to exhibit very stable cycling at a practical level of areal capacity up to 3 mAh cm-2 . It is demonstrated that the Cu, Fe, and Cr doping into the LNMO lattice can suspend the Mn dissolution and improve the Li ion diffusivity and electronic conductivity of the LNMO host. As a result, the obtained CFC0.5-LNMO cathode exhibits an excellent rate performance (1.75 mAh cm-2 at 1C) and long cycling stability under an areal capacity of 3 mAh cm-2 (78% capacity retention over 300 cycles at 0.5C).

Stable All-Solid-State Lithium Metal Batteries Enabled by Machine Learning Simulation Designed Halide Electrolytes.

Solid electrolytes (SEs) with superionic conductivity and interfacial stability are highly desirable for stable all-solid-state Li-metal batteries (ASSLMBs). Here, we employ neural network potential to simulate materials composed of Li, Zr/Hf, and Cl using stochastic surface walking method and identify two potential unique layered halide SEs, named Li2ZrCl6 and Li2HfCl6, for stable ASSLMBs. The predicted halide SEs possess high Li+ conductivity and outstanding compatibility with Li metal anodes. We synthesize these SEs and demonstrate their superior stability against Li metal anodes with a record performance of 4000 h of steady lithium plating/stripping. We further fabricate the prototype stable ASSLMBs using these halide SEs without any interfacial modifications, showing small internal cathode/SE resistance (19.48 Ω cm2), high average Coulombic efficiency (∼99.48%), good rate capability (63 mAh g-1 at 1.5 C), and unprecedented cycling stability (87% capacity retention for 70 cycles at 0.5 C).