RESUMO
Raman spectra of two series of InAs/AlAs short-period superlattices were measured at room temperature to investigate the impact of strain on the phonon modes taking into consideration the confinement effect and interface mode. The evolution of strain in the InAs layer and the AlAs layer was studied in (InAs)2/(AlAs)2 superlattices grown at various temperatures (400-550 °C). While the strain existed in the AlAs layer remained almost constant, the strain in the InAs layer varied significantly as the growth temperature increased from 500 to 550 °C. The confinement effect on the optical phonons was analyzed based on results from (InAs)n/(AlAs)n grown at 450 °C (n = 2, 3, 4, and 5). Additionally, the confinement effect was found to be stronger in shorter periods with higher interface quality. The interface phonon modes were resolved between the longitudinal optical and transverse optical phonon modes, which assist in the rough estimation of the thickness of the layers. The disorder-activated acoustic phonon modes at the low-frequency side were also addressed.
RESUMO
InP-based avalanche photodiodes (APDs) are widely used in short-wave infrared (SWIR) communications. In this work, a thin (200 nm nominal) InAlAs digital alloy layer consisting of two monolayer (ML) InAs and two ML AlAs was grown on InP substrate and investigated in detail. APDs with p-i-n and n-i-p structures were fabricated and characterized. The current-voltage, capacitance-voltage characteristics, and excess noise were measured at room temperature with different laser wavelengths, and the measured effective k value (ratio of impact ionization coefficients) is about 0.15 with the multiplication gain up to 12. The randomly-generated path length (RPL) model was carried out to analyze the dead space effect. Our thin digital alloy successfully reduced excess noise compared with conventional In0.52Al0.48As random alloy without introducing new elements and shows the potential for high-speed, low noise APD applications.