Ultra-high photoelectric conversion efficiency and obvious carrier separation in photovoltaic ZnIn2X4 (X = S, Se, and Te) van der Waals heterostructures.

The need for low-carbon solar electricity production has become increasingly urgent for energy security and climate change mitigation. However, the bandgap and carrier separation critical requirements of high-efficiency solar cells are difficult to satisfy simultaneously in a single material. In this work, several van der Waals ZnIn2X4 (X = S, Se, and Te) heterostructures were designed based on density functional theory. Our results suggest that both ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures are direct bandgap semiconductors at the Γ point. Besides, obvious carrier spatial separations were observed in the ZnIn2S4/ZnIn2Se4 and ZnIn2Se4/ZnIn2Te4 heterostructures. Interestingly, the ZnIn2S4/ZnIn2Se4 heterostructure has a suitable bandgap of 1.43 eV with good optical absorption in the visible light range. The calculated maximum theoretical photoelectric conversion efficiency of ZnIn2S4/ZnIn2Se4 heterostructure was 32.1%, and it can be further enhanced to 32.9% under 2% tensile strain. Compared to single-layer ZnIn2X4 materials, the electron effective mass of the ZnIn2S4/ZnIn2Se4 heterostructure is relatively low, which results in high electron mobility in the heterostructure. The suitable bandgap, obvious carrier separation, high electron mobility, and excellent theoretical photoelectric conversion efficiency of the ZnIn2S4/ZnIn2Se4 heterostructure make it a promising candidate for novel 2D-based photoelectronic devices and solar cells.

Enhanced optical absorption in two-dimensional Ruddlesden-Popper (C6H5CH2NH3)2PbI4 perovskites via biaxial strain and surface doping.

Two-dimensional Ruddlesden-Popper (2D RP) perovskites can form layered protective materials using long organic cations as "barrier" caps, which is expected to solve the problem of instability of perovskites in the working environment. In this work, we systematically studied the 2D Ruddlesden-Popper (C6H5CH2NH3)2PbI4 hybrid perovskites using density functional theory. The results reveal that the 2D (C6H5CH2NH3)2PbI4 perovskites are semiconductors with band gaps of 2.22 eV. The optical absorption peak of the 2D (C6H5CH2NH3)2PbI4 perovskite structure is located at 532 nm in the visible region. Interestingly, the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure enhanced under suitable strains. The highest optical absorption peak appears in 2D (C6H5CH2NH3)2PbI4 under a -2% strain, and its theoretical photoelectric conversion efficiency is 28.5%. More interestingly, the replacement of surface I atoms with Br is another ways to enhance the optical absorption spectrum of the 2D (C6H5CH2NH3)2PbI4 perovskite structure. The optical absorption peak blue-shifts to the high energy region, which has higher solar energy flux density than the low energy region. The good stability, tuneable band gap and excellent theoretical photoelectric conversion efficiency of the 2D (C6H5CH2NH3)2PbI4 perovskite structure make it a promising candidate for novel 2D hybrid perovskite based photoelectronic devices and solar cells.

Sublethal Exposure to Deltamethrin Stimulates Reproduction and Alters Symbiotic Bacteria in Aphis gossypii.

In aphids, hormesis and symbiotic bacteria are the drivers for the development of pesticide resistance. However, the related mechanism remains unclear. Here, we evaluated the sublethal and transgenerational effects of the extensively used pyrethroid pesticide deltamethrin (DMT) on the population dynamics in Aphis gossypii and tested its influence on symbiotic bacterial communities. The leaf-dip bioassay revealed that DMT was highly toxic to A. gossypii, and at a low lethal concentration of DMT, the intrinsic (r) and finite rates of increase (λ) of the initially exposed aphids (G0) significantly decreased. Intriguingly, the r, λ, and net reproductive rate (R0) of G1 and G2 significantly increased, but the r and λ decreased in G3. The adult and total preoviposition period increased in G3 but decreased in G4. Additionally, the diversity of the bacterial community decreased, while the abundance values of Buchnera, Pseudomonadaceae, and Burkholderiaceae increased after 24 h of exposure to LC30 DMT in G0 aphids, and the latter two decreased in G1 but increased in G2. In summary, sublethal DMT has intergenerational hormesis effect on cotton aphids in G1-G2 and remarkably altered their symbiotic bacterial community and abundance. These results broaden our understanding of the relationship of hormesis and symbiotic bacteria in aphids under insecticide exposure.

Evaluation of sublethal and transgenerational effects of sulfoxaflor on Aphis gossypii via life table parameters and 16S rRNA sequencing.

BACKGROUND: Aphis gossypii, a polyphagous and recurrent pest induced by pesticides, causes tremendous loss crop yields each year. Previous studies on the mechanism of pesticide-induced sublethal effects mainly focus on the gene level. The symbiotic bacteria are also important participants of this mechanism, but their roles in hormesis are still unclear. RESULTS: In this study, life table parameters and 16S rRNA sequencing were applied to evaluate the sublethal and transgenerational effects of sulfoxaflor on adult A. gossypii after 24-h LC20 (6.96 mg L-1 ) concentration exposure. The results indicated that the LC20 of sulfoxaflor significantly reduced the finite rate of increase (λ) and net reproductive rate (R0 ) of parent generation (G0), and significantly increased mean generation time (T) of G1 and G2, but not of G3 and G4. Both reproductive period and fecundity of G1 and G2 were significantly higher than those of the control. Furthermore, our sequencing data revealed that more than 95% bacterial communities were dominated by the phylum Proteobacteria, in which the maximum proportion genus was the primary symbiont Buchnera and the facultative symbiont Arsenophonus. Compared to those of the control, the abundance and composition of symbiotic bacteria of A. gossypii for three successive generations (G0-G2) were changed after G0 A. gossypii was exposed to sulfoxaflor: the diversity of the bacterial community was decreased, but the abundance of Buchnera was increased (G0), while the abundance of Arsenophonus was decreased. Contrary to G0, G1 and G2 cotton aphid exhibited an increased relative abundance of Arsenophonus in the sublethal treatment group. CONCLUSION: Taken together, our results provide an insight into the interactions among pesticide resistance, aphids, and symbionts, which will eventually help to better manage the resurgence of A. gossypii. © 2021 Society of Chemical Industry.

Transgenic Bt Cotton Does Not Disrupt the Top-Down Forces Regulating the Cotton Aphid in Central China.

Top-down force is referred to arthropod pest management delivered by the organisms from higher trophic levels. In the context of prevalent adoption of transgenic Bt crops that produce insecticidal Cry proteins derived from Bacillus thuringiensis (Bt), it still remains elusive whether the top-down forces are affected by the insect-resistant traits that introduced into the Bt crops. We explored how Bt cotton affect the strength of top-down forces via arthropod natural enemies in regulating a non-target pest species, the cotton aphid Aphis gossypii Glover, using a comparative approach (i.e. Bt cotton vs. conventional cotton) under field conditions. To determine top-down forces, we manipulated predation/parasitism exposure of the aphid to their natural enemies using exclusion cages. We found that the aphid population growth was strongly suppressed by the dominant natural enemies including Coccinellids, spiders and Aphidiines parasitoids. Coccinellids, spiders and the assemblage of other arthropod natural enemies (mainly lacewings and Hemipteran bugs) are similarly abundant in both plots, but with the parasitoid mummies less abundant in Bt cotton plots compared to the conventional cotton plots. However, the lower abundance of parasitoids in Bt cotton plots alone did not translate into differential top-down control on A. gossypii populations compared to conventional ones. Overall, the top-down forces were equally strong in both plots. We conclude that transgenic Bt cotton does not disrupt the top-down forces regulating the cotton aphid in central China.

Field Measurements and Numerical Simulations of Temperature and Moisture in Highway Engineering Using a Frequency Domain Reflectometry Sensor.

This paper presents a systematic pioneering study on the use of agricultural-purpose frequency domain reflectometry (FDR) sensors to monitor temperature and moisture of a subgrade in highway extension and reconstruction engineering. The principle of agricultural-purpose FDR sensors and the process for embedding this kind of sensors for subgrade engineering purposes are introduced. Based on field measured weather data, a numerical analysis model for temperature and moisture content in the subgrade's soil is built. Comparisons of the temperature and moisture data obtained from numerical simulation and FDR-based measurements are conducted. The results show that: (1) the embedding method and process, data acquisition, and remote transmission presented are reasonable; (2) the temperature and moisture changes are coordinated with the atmospheric environment and they are also in close agreement with numerical calculations; (3) the change laws of both are consistent at positions where the subgrade is compacted uniformly. These results suggest that the data measured by the agricultural-purpose FDR sensors are reliable. The findings of this paper enable a new and effective real-time monitoring method for a subgrade's temperature and moisture changes, and thus broaden the application of agricultural-purpose FDR sensors.