Supercritical carbon dioxide extraction of Usnea longissima (L.) Ach.: Optimization by Box-Behnken design (BBD).

Usnic acid (UA) was extracted from Usnea longissima (L.) Ach. in supercritical carbon dioxide (SC-CO2) medium. The selected process parameters were extraction temperature (35-45 °C), amount of co-solvent (0%-5%) and extraction time (5-9 h). These parameters were applied to Box-Behnken design (BBD) belonging to response surface methodology (RSM) to determine optimum process parameters for the highest amount of UA in the extract. g UA/100g lichen, extraction yield % and UA content values were calculated in the range of 0.045-0.317, 2.77-5.4 and 71%-82% in different experimental conditions, respectively. The optimum conditions were predicted as 42 °C, 4.3% (ethanol) and 7.48 h. It was determined that the predicted and experimental values of g UA/100g lichen were compatible, and the suggested model was valid.

Experimental and Modelling Analysis of the Hyperthermia Properties of Iron Oxide Nanocubes.

The ability of magnetic nanoparticles (MNPs) to transform electromagnetic energy into heat is widely exploited in well-known thermal cancer therapies, such as magnetic hyperthermia, which proves useful in enhancing the radio- and chemo-sensitivity of human tumor cells. Since the heat release is ruled by the complex magnetic behavior of MNPs, a careful investigation is needed to understand the role of their intrinsic (composition, size and shape) and collective (aggregation state) properties. Here, the influence of geometrical parameters and aggregation on the specific loss power (SLP) is analyzed through in-depth structural, morphological, magnetic and thermometric characterizations supported by micromagnetic and heat transfer simulations. To this aim, different samples of cubic Fe3O4 NPs with an average size between 15 nm and 160 nm are prepared via hydrothermal route. For the analyzed samples, the magnetic behavior and heating properties result to be basically determined by the magnetic single- or multi-domain configuration and by the competition between magnetocrystalline and shape anisotropies. This is clarified by micromagnetic simulations, which enable us to also elucidate the role of magnetostatic interactions associated with locally strong aggregation.

Immobilization of Candida antarctica Lipase on Nanomaterials and Investigation of the Enzyme Activity and Enantioselectivity.

This study defines the lipase immobilization protocol and enzymatic kinetic resolution of 1-phenyl ethanol with the use of immobilized lipases (LI) as a biocatalyst. Commercially available lipase Candida antarctica B (Cal-B) was immobilized onto graphene oxide (GO), iron oxide (Fe3O4) nanoparticles, and graphene oxide/iron oxide (GO/Fe3O4) nanocomposites. Characterization of pure and enzyme-loaded supports was carried out by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The influences of pH, temperature, immobilization time, crosslinker concentration, glutaraldehyde (GLA), epichlorohydrin (EPH), and surfactant concentrations (Tween 80 and Triton X-100) on the catalytic activity were evaluated for these three immobilized biocatalysts. The highest immobilized enzyme activities were 15.03 U/mg, 14.72 U/mg, and 13.56 U/mg for GO-GLA-CalB, Fe3O4-GLA-CalB, and GO/Fe3O4-GLA-CalB, respectively. Moreover, enantioselectivity and reusability of these immobilized lipases were compared for the kinetic resolution of 1-phenyl ethanol, using toluene as organic solvent and vinyl acetate as acyl donor. The highest values of enantiomeric excess (ees = 99%), enantioselectivity (E = 507.74), and conversion (c = 50.73%) were obtained by using lipase immobilized onto graphene oxide (GO-GLA-CalB). It was obtained that this enzymatic process may be repeated five times without important loss of enantioselectivity.

Synthesis and characterization of Fe3O4-MPTMS-PLGA nanocomposites for anticancer drug loading and release studies.

Magnetic nanocomposites (Fe3O4-MPTMS-PLGA) were synthesized by single oil emulsion method and characterized by transmission electron microscopy (TEM), X-Ray diffraction (XRD), and vibrating sample magnetometer (VSM). Particle size of nanocomposites was between 117 nm and 246 nm. High performance liquid chromatography (HPLC) was used to investigate drug loading (paclitaxel, PTX) and release from Fe3O4-MPTMS-PLGA-PTX nanocomposites. The percentages of drug loading and encapsulation efficiency onto nanocomposites were found as 7.35 and 68.58, respectively. Cytotoxities of free anticancer drug and anticancer drug-loaded nanocomposites were determined by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. In vitro cell culture studies indicated that Fe3O4-MPTMS-PLGA-PTX had significant toxicity on MG-63 cancer cells.

Adsorption of o-, m- and p-nitrophenols onto organically modified bentonites.

Experiments were conducted on the adsorption characteristics of o-, m- and p-nitrophenols by organically modified bentonites at different temperatures. Two organobentonites (HDTMA-B and PEG-B) were synthesized using hexadecyltrimethylammonium bromide (HDTMABr) and poly(ethylene glycol) butyl ether (PEG). Synthesized HDTMA-B and PEG-B were characterized by XRD, FTIR and DTA-TG analyses and their specific surface area, particle size and pore size distributions were determined. BET surface areas and basal spacings (d(001)) of the HDTMA-B and PEG-B were found to be 38.71 m(2)g(-1), 69.04 m(2)g(-1) and 21.96 Å, 15.17 Å, respectively. Increased adsorption with temperature indicates that the process is endothermic for o-nitrophenol. On the other hand m- and p-nitrophenols exhibited lower rates of adsorption at higher temperatures suggesting a regular exothermic process taking place. Results were analyzed according to the Langmuir, Freundlich and Dubinin-Redushkevich (D-R) isotherm equations using linearized correlation coefficient at different temperatures. R(L) separation factors for Langmuir and the n values for Freundlich isotherms showed that m- and p-nitrophenols are favorably adsorbed by HDTMA-B and, p-nitrophenol is favored by PEG-B. Adsorption of o-, m- and p-nitrophenols as single components or from their binary mixtures on HDTMA-B and, p-nitrophenol on PEG-B are all defined to be physical in nature.

Heavy metal removal from aqueous solution by Pseudevernia furfuracea (L.) Zopf.

The present study was carried out in a batch system using a lichen (Pseudevernia furfuracea (L.) Zopf) for the sorption of nickel(II) and copper(II) ions from water. Particularly, the effect of pH, contact time and temperature were considered. Pseudevernia furfuracea exhibited nickel(II) and copper(II) uptake of 49.87 and 60.83 mg/g at an initial pH of 4 and 5-6 at 35 degrees C respectively. Both the Freundlich and Langmuir adsorption models were suitable for describing the biosorption of nickel(II) and copper(II) by the biosorbent. Biosorption showed pseudo first order rate kinetics for nickel and copper ions. Using the equilibrium constant values obtained at 25 and 35 degrees C, the thermodynamics properties of the biosorption (deltaG degrees, deltaH degrees and deltaS degrees) were determined. The biosorption of nickel(II) and copper(II) onto Pseudevernia furfuracea was found to be endothermic.

Equilibrium and kinetic studies for the sorption of 3-methoxybenzaldehyde on activated kaolinites.

The sorption of 3-methoxybenzaldehyde on activated kaolinites has been investigated at different temperatures. Two types of activation tests were performed. The sorption equilibrium was studied by sorption isotherms in the temperature range 303-333K for natural (untreated), thermally and acid activated kaolinites. It was shown that the isotherm shapes were not affected by temperature and activation types of kaolinite. The absorbance data at 312nm were fitted reasonably well with the Langmuir and Freundlich isotherm models and the model parameters were determined for different temperatures. Thermodynamic quantities such as Gibbs free energy (DeltaG), the enthalpy (DeltaH) and the entropy change of sorption (DeltaS) were determined for natural, thermally and acid activated kaolinites. It was shown that the sorption processes were an endothermic reactions, controlled by physical mechanisms and spontaneously. Adsorption capacity of acid activated kaolinite for 3-methoxybenzaldehyde was higher compared to that of natural and thermally activated kaolinites at various temperatures. The adsorption and desorption rate constants (k(a) and k(d)) were obtained separately by applying a geometric approach to the first order Langmuir model. This method provided good conformity between the K from Langmuir parameters and K(geo) (k(a)/k(d)) from geometric approach.