Synthesis and Characterization of a Trigonal Layered Compound AgInS2.

Depending on thermal and pressure conditions, AgInS2 exhibits various crystal structures. In this study, we synthesized a high-purity polycrystalline sample of trigonal AgInS2, which is a layered compound, using a high-pressure synthesis technique. The crystal structure was investigated by synchrotron powder X-ray diffraction and the Rietveld refinement. On the basis of band calculation, X-ray photoelectron spectroscopy, and electrical resistance measurements, we found that the obtained trigonal AgInS2 is a semiconductor. Temperature dependencies of electrical resistance of AgInS2 were measured by a diamond anvil cell up to 31.2 GPa. Although semiconducting behavior was suppressed with pressure, metallic behavior was not observed within the pressure range investigated in this study.

Synthetic Route of Layered Titanium Nitride Chloride TiNCl Using Sodium Amide.

A synthetic route in a closed system for layered titanium nitride chloride TiNCl has been developed using sodium amide NaNH2 as a nitrogen source. A highly crystalline sample is obtained by an appropriate thermal decomposition of aminated titanium chloride. The obtained TiNCl was also characterized using electronic resistivity measurement and photoemission spectroscopy. TiNCl showed hopping conduction compatible with an in-gap state revealed by photoelectron spectroscopy. However, it appeared highly electron-doped, albeit without showing superconductivity. Comparison with the spectrum of superconducting sodium-doped samples suggests the presence of the microstructure required to exhibit superconductivity.

Soft x-ray irradiation induced metallization of layered TiNCl.

We have performed soft x-ray spectroscopy in order to study the photoirradiation time dependence of the valence band structure and chemical states of layered transition metal nitride chloride TiNCl. Under the soft x-ray irradiation, the intensities of the states near the Fermi level (EF) and the Ti3+component increased, while the Cl 2pintensity decreased. Ti 2p-3dresonance photoemission spectroscopy confirmed a distinctive Fermi edge with Ti 3dcharacter. These results indicate the photo-induced metallization originates from deintercalation due to Cl desorption, and thus provide a new carrier doping method that controls the conducting properties of TiNCl.

Skewed electronic band structure induced by electric polarization in ferroelectric BaTiO3.

Skewed band structures have been empirically described in ferroelectric materials to explain the functioning of recently developed ferroelectric tunneling junction (FTJs). Nonvolatile ferroelectric random access memory (FeRAM) and the artificial neural network device based on the FTJ system are rapidly developing. However, because the actual ferroelectric band structure has not been elucidated, precise designing of devices has to be advanced through appropriate heuristics. Here, we perform angle-resolved hard X-ray photoemission spectroscopy of ferroelectric BaTiO3 thin films for the direct observation of ferroelectric band skewing structure as the depth profiles of atomic orbitals. The depth-resolved electronic band structure consists of three depth regions: a potential slope along the electric polarization in the core, the surface and interface exhibiting slight changes. We also demonstrate that the direction of the energy shift is controlled by the polarization reversal. In the ferroelectric skewed band structure, we found that the difference in energy shifts of the atomic orbitals is correlated with the atomic configuration of the soft phonon mode reflecting the Born effective charges. These findings lead to a better understanding of the origin of electric polarization.

Change in the electronic structure of the bismuth chalcogenide superconductor CsBi4-x Pb x Te6 by dissociation of the bismuth dimers.

CsBi4-x Pb x Te6 is synthesized and the superconductivity associated with the structural transition from Pb substitution is studied. Photoemission spectroscopy measurements are performed in order to elucidate the relationship between the electronic structure and the occurrence of the superconductivity. When Bi is substituted with Pb, an electron doping-like change in the electronic structure is directly observed which is contrary to the naive expectation of hole doping. This observation is consistent with band structure calculations and appears to be a unique characteristic of CsBi4-x Pb x Te6 because of the dissociation of Bi dimers upon Pb substitution. These results indicate that it may be possible to control the electron and hole doping via manipulating the Bi dimers through Pb substitution.

Selective Reduction Mechanism of Graphene Oxide Driven by the Photon Mode versus the Thermal Mode.

A two-dimensional nanocarbon, graphene, has attracted substantial interest due to its excellent properties. The reduction of graphene oxide (GO) has been investigated for the mass production of graphene used in practical applications. Different reduction processes produce different properties in graphene, affecting the performance of the final materials or devices. Therefore, an understanding of the mechanisms of GO reduction is important for controlling the properties of functional two-dimensional systems. Here, we determined the average structure of reduced GO prepared via heating and photoexcitation and clearly distinguished their reduction mechanisms using ultrafast time-resolved electron diffraction, time-resolved infrared vibrational spectroscopy, and time-dependent density functional theory calculations. The oxygen atoms of epoxy groups are selectively removed from the basal plane of GO by photoexcitation (photon mode), in stark contrast to the behavior observed for the thermal reduction of hydroxyl and epoxy groups (thermal mode). The difference originates from the selective excitation of epoxy bonds via an electronic transition due to their antibonding character. This work will enable the preparation of the optimum GO for the intended applications and expands the application scope of two-dimensional systems.

Fermi level tuning of Ag-doped Bi2Se3 topological insulator.

The temperature dependence of the resistivity (ρ) of Ag-doped Bi2Se3 (AgxBi2-xSe3) shows insulating behavior above 35 K, but below 35 K, ρ suddenly decreases with decreasing temperature, in contrast to the metallic behavior for non-doped Bi2Se3 at 1.5-300 K. This significant change in transport properties from metallic behavior clearly shows that the Ag doping of Bi2Se3 can effectively tune the Fermi level downward. The Hall effect measurement shows that carrier is still electron in AgxBi2-xSe3 and the electron density changes with temperature to reasonably explain the transport properties. Furthermore, the positive gating of AgxBi2-xSe3 provides metallic behavior that is similar to that of non-doped Bi2Se3, indicating a successful upward tuning of the Fermi level.

Fermi surface topology in a metallic phase of VO2 thin films grown on TiO2(001) substrates.

Since the first observation of the metal-to-insulator transition (MIT), VO2 has attracted substantial attention in terms of whether this transition is impelled by electron-phonon interaction (Peierls transition) or electron-electron interaction. Regarding Peierls transition, it has been theoretically predicted that the Fermi surface (FS) cross-section exhibits certain nesting features for a metallic phase of VO2. Various experimental studies related to the nesting feature have been reported. Nevertheless, there is no experimental result on FS topology. In this work, we determine the FS topology of the metallic phase of VO2 through studies of VO2 epitaxial thin films on TiO2(001) substrates, using synchrotron radiation angle-resolved photoemission spectroscopy (ARPES). Three electron pockets around Γ are observed in band structures along the Γ-X direction. These three bands form electron surfaces around Γ in the ΓXRZ plane. Furthermore, the lowest energy band FS exhibits the nesting feature corresponding to a nesting vector [Formula: see text] = ΓR, as predicted by the calculation. Our results strongly indicate the formation of the charge-density wave with [Formula: see text] = ΓR and thus, the importance of Peierls transition for the mechanism of the MIT in VO2.

Determination of the local structure of Sr2-xMxIrO4 (M = K, La) as a function of doping and temperature.

The local structure of correlated spin-orbit insulator Sr2-xMxIrO4 (M = K, La) has been investigated by Ir L3-edge extended X-ray absorption fine structure measurements. The measurements were performed as a function of temperature for different dopings induced by substitution of Sr with La or K. It is found that Ir-O bonds have strong covalency and they hardly show any change across the Néel temperature. In the studied doping range, neither Ir-O bonds nor their dynamics, measured by their mean square relative displacements, show any appreciable change upon carrier doping, indicating the possibility of nanoscale phase separation in the doped system. On the other hand, there is a large increase of the static disorder in Ir-Sr correlation, larger for K doping than La doping. Similarities and differences with respect to the local lattice displacements in cuprates are briefly discussed.

Origins of Thermal Spin Depolarization in Half-Metallic Ferromagnet CrO_{2}.

Using high-resolution spin-resolved photoemission spectroscopy, we observe a thermal spin depolarization to which all spin-polarized electrons contribute. Furthermore, we observe a distinct minority spin state near the Fermi level and a corresponding depolarization that seldom contributes to demagnetization. The origin of this depolarization has been identified as the many-body effect characteristic of half-metallic ferromagnets. Our investigation opens an experimental field of itinerant ferromagnetic physics focusing on phenomena with sub-meV energy scale.

The electronic structure of Ag1-xSn1+xSe2 (x = 0.0, 0.1, 0.2, 0.25 and 1.0).

We have studied the valence electronic structure of Ag1-xSn1+xSe2 (x = 0.0, 0.1, 0.2, 0.25) and SnSe (x = 1.0) by a combined analysis of X-ray absorption spectroscopy (XAS) and X-ray photoemission spectroscopy (XPS) measurements. Both XAS and XPS reveal an increase in electron carriers in the system with x (i.e. excess Sn concentration) for 0 ≤ x ≤ 0.25. The core-level spectra (Sn 3d, Ag 3d and Se 3d) show that the charge state of Ag is almost 1+, while that of of Sn splits into Sn2+ and Sn4+ (providing clear evidence of valence skipping for the first time) with a concomitant splitting of Se into Se2- and Se2-δ states. The x dependence of the split components in Sn and Se together with the Se-K edge XAS reveals that the Se valence state may have an essential role in the transport properties of this system.

Determination of the local structure of CsBi4-xPbxTe6 (x = 0, 0.5) by X-ray absorption spectroscopy.

We have studied the local structure and valence electronic unoccupied states of thermoelectric CsBi4Te6 and superconducting CsBi3.5Pb0.5Te6 (Tc ∼ 3 K) by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) measurements. The Bi-L3 edge EXAFS reveals wide Bi-Te distance distribution for both compounds indicating complex atomic arrangements in the studied system. The mean square relative displacements (MSRDs) of the Bi-Te bond distances appear largely increased in Pb substituted system due to larger overall local disorder, however, one of the Bi-Te bonds shows a reduced disorder. On the other hand, the Bi-L3 edge XANES is hardly affected by Pb substitution while the Te-L1 edge XANES reveals increased density of unoccupied Te 5p states. This suggests that the carriers introduced by the Pb substitution in CsBi4-xPbxTe6 preferentially goes on Te sites. Similarly, the Cs-L3 edge XANES also shows small changes due to Pb-substitution and reduced local disorder indicated by the reduced width of the Cs-L3 edge white line. We have also shown that the X-ray photoemission spectroscopy (XPS) measurements on various electronic core levels are in a qualitative agreement with the XANES results. These findings are consistent with carrier doping and a reduced disorder in one direction to be likely factors to drive the thermoelectric CsBi4Te6 into a bulk superconductor by Pb-substitution in CsBi4-xPbxTe6.

Emergence of superconductivity in (NH3)yMxMoSe2 (M: Li, Na and K).

We report syntheses of new superconducting metal-doped MoSe2 materials (MxMoSe2). The superconducting MxMoSe2 samples were prepared using a liquid NH3 technique, and can be represented as '(NH3)yMxMoSe2'. The Tcs of these materials were approximately 5.0 K, independent of x and the specific metal atom. X-ray diffraction patterns of (NH3)yNaxMoSe2 were recorded using polycrystalline powders. An increase in lattice constant c showed that the Na atom was intercalated between MoSe2 layers. The x-independence of c was observed in (NH3)yNaxMoSe2, indicating the formation of a stoichiometric compound in the entire x range, which is consistent with the x-independence of Tc. A metallic edge of the Fermi level was observed in the photoemission spectrum at 30 K, demonstrating its metallic character in the normal state. Doping of MoSe2 with Li and K also yielded superconductivity. Thus, MoSe2 is a promising material for designing new superconductors, as are other transition metal dichalcogenides.

Signature of high Tc above 25 K in high quality superconducting diamond.

We have observed zero resistivity above 10 K and an onset of resistivity reduction at 25.2 K in a heavily B-doped diamond film. However, the effective carrier concentration is similar to that of superconducting diamond with a lower Tc. We found that the carrier has a longer mean free path and lifetime than in the previous report, indicating that this highest Tc diamond has better crystallinity compared to that of other superconducting diamond films. In addition, the susceptibility shows a small transition above 20 K in the high quality diamond, suggesting a signature of superconductivity above 20 K. These results strongly suggest that heavier carrier doped defect-free crystalline diamond could give rise to high Tc diamond.

Characteristic two-dimensional Fermi surface topology of high-Tc iron-based superconductors.

Unconventional Cooper pairing originating from spin or orbital fluctuations has been proposed for iron-based superconductors. Such pairing may be enhanced by quasi-nesting of two-dimensional electron and hole-like Fermi surfaces (FS), which is considered an important ingredient for superconductivity at high critical temperatures (high-Tc). However, the dimensionality of the FS varies for hole and electron-doped systems, so the precise importance of this feature for high-Tc materials remains unclear. Here we demonstrate a phase of electron-doped CaFe2As2 (La and P co-doped CaFe2As2) with Tc = 45 K, which is the highest Tc found for the AEFe2As2 bulk superconductors (122-type; AE = Alkaline Earth), possesses only cylindrical hole- and electron-like FSs. This result indicates that FS topology consisting only of two-dimensional sheets is characteristic of both hole- and electron-doped 122-type high-Tc superconductors.

Translational symmetry breaking and gapping of heavy-quasiparticle pocket in URu2Si2.

URu2Si2 is a uranium compound that exhibits a so-called 'hidden-order' transition at ~17.5 K. However, the order parameter of this second-order transition as well as many of its microscopic properties remain unclarified despite considerable research. One of the key questions in this regard concerns the type of spontaneous symmetry breaking occurring at the transition; although rotational symmetry breaking has been detected, it is not clear whether another type of symmetry breaking also occurs. Another key question concerns the property of Fermi-surface gapping in the momentum space. Here we address these key questions by a momentum-dependent observation of electronic states at the transition employing ultrahigh-resolution three-dimensional angle-resolved photoemission spectroscopy. Our results provide compelling evidence of the spontaneous breaking of the lattice's translational symmetry and particle-hole asymmetric gapping of a heavy quasiparticle pocket at the transition.

Magnetoelectric effect driven by magnetic domain modification in LuFe2O4.

The magnetocapacitance effect was investigated using impedance spectroscopy on single crystals of LuFe(2)O(4). The intrinsic impedance response could be separated from the interfacial response and showed a clear hysteresis loop below T(Ferri)∼240 K under the magnetic field. The neutron diffraction experiment under the magnetic field proves the origin of the dielectric property related to the motion of the nanosized ferromagnetic domain boundary. These results imply that the modification of the microscopic domain structure is responsible for the magnetoelectric effect in LuFe(2)O(4).

Te concentration dependent photoemission and inverse-photoemission study of FeSe1-xTex.

We have characterized the electronic structure of FeSe1-x Te x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (EF): its splitting near EF and filling of the pseudogap in FeSe. IPES shows two features, near EF and approximately 6 eV above EF; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near EF for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.

Development of a soft X-ray angle-resolved photoemission system applicable to 100†µm crystals.

A system for angle-resolved photoemission spectroscopy (ARPES) of small single crystals with sizes down to 100 µm has been developed. Soft X-ray synchrotron radiation with a spot size of ∼40 µm × 65 µm at the sample position is used for the excitation. Using this system an ARPES measurement has been performed on a Si crystal of size 120 µm × 100 µm × 80 µm. The crystal was properly oriented on a sample stage by measuring the Laue spots. The crystal was cleaved in situ with a microcleaver at 100 K. The cleaved surface was adjusted to the beam spot using an optical microscope. Consequently, clear band dispersions along the Γ-X direction reflecting the bulk electronic states were observed with a photon energy of 879 eV.

In situ positioning of a few hundred micrometer-sized cleaved surfaces for soft-x-ray angle-resolved photoemission spectroscopy by use of an optical microscope.

A method to position samples with small cleaved regions has been developed to be applied to the angle-resolved photoemission spectroscopy (ARPES) which uses soft-x-ray synchrotron radiation focused down to 160 x 180 microm(2). A long-working-distance optical microscope is used for the sample observation. A selected region on a sample can be optimally set at the position of measurements, which is realized by the spatial resolution of the photoelectron analyzer. Using this method, electronic band dispersions of bulk silicon have been measured by ARPES for a partially cleaved region with a size of approximately 200 x 500 microm(2).