RESUMO
The laser-assisted diamond turning (LADT) method can effectively improve the machinability of hard and brittle materials based on the laser heating effect, resulting in prolonged diamond tool life and better surface integrity. However, due to the incomplete absorption of laser beam energy within the workpiece cutting zone, simultaneous heating of the tool holder occurs, resulting in a structural thermal expansion that affects the workpiece form accuracy. In this article, the form accuracy of a LADT-machined workpiece was systematically studied. Accurate calculations of the tool shank and tool holder thermal fields and thermal expansion were performed using thermodynamic coupled finite element analysis. In addition, the LADT tool path was precisely pre-compensated by taking into account the structure expansion. The experimental results demonstrate that the form accuracy can be significantly improved with a pre-compensated tool path, which provides crucial technical support for achieving a high-precision finish on optical elements using the LADT method.
RESUMO
Binderless tungsten carbide (WC) finds widespread applications in precision glass molding (PGM). Grinding and polishing are the main processes to realize optical surface finish on binderless WC mold inserts. The laser assisted turning (LAT) by in-process heating is an efficient method to enhance the machinability of hard and brittle materials. In this paper, laser heating temperature was pre-calculated by the finite element analysis, and was utilized to facilitate laser power selection. The effects of rake angle, depth of cut, feed rate, and laser power are studied experimentally using the Taguchi method. The variance, range, and signal-to-noise ratio analysis methods are employed to evaluate the effects of the factors on the surface roughness. Based on the self-developed LAT system, binderless WC mold inserts with mirror finished surfaces are machined using the optimal parameters. PGM experiments of molding glass lenses for practical application are conducted to verify the machined mold inserts quality. The experiment results indicate that both the mold inserts and molded lenses with the required quality are achieved.
RESUMO
Precision glass molding is the most appropriate method for batch production of glass lenses with high surface accuracy and qualified optical performance. However, the form error caused by material expansion and contraction is the main factor affecting the precision of the molded lenses, thus the mold must be pre-compensated. In this paper, an effective method of mold pre-compensation based on mathematical analysis is established. Based on the thermal expansion curve of D-ZK3 glass, the freezing fictive temperature of the glass under the actual cooling rate is measured, and the mold pre-compensation factor can be quickly calculated. Experimental results show that the peak valley (PV) value of the surface form error of molded aspheric lens with an aperture of 5.3 mm is effectively reduced from 2.04 µm to 0.31 µm after the pre-compensation, thus meeting the geometric evaluation criterion.
RESUMO
Slow tool servo diamond turning has widespread application in fabricating freeform optics. Previous studies are focused on the methods of the tool path generation and verification of zero-rake-angle tools. However, these methods are unsuitable for non-zero-rake tools that are used for machining hard-and-brittle materials. This paper presents a universal location-point-drive tool path generation method, which caters to arbitrary rake angle tools and the steady X movement feature, and the corresponding universal tool interference check method. Systematic analysis and ultra-precision machining experiments confirmed the feasibility of our methods and present better surface quality and form accuracy compared to the traditional method.
RESUMO
A novel approach named off-spindle-axis (OSA) spiral grinding for fabricating aspheric microlens array (AMLA) mold inserts for precision glass molding (PGM) is presented. In OSA spiral grinding, three translational motions of the grinding wheel are synchronized with the rotation of the workpiece to form a local spiral wheel path for individual lens-lets. With this approach, the form accuracy of lens-lets can be compensated within sub-micrometer by means of the on-machine measurement. The determination of wheel path and form error compensation via on-machine measurement are systematically studied. A tungsten carbide mold insert with four convex aspheric lens-lets is fabricated to evaluate the grinding performance. PGM experiments are performed to produce glass AMLA using the ground insert. The experimental results indicate that both the ground and molded AMLA with homogeneous quality are achieved. The form accuracy and surface roughness of both the mold insert and the molded AMLA were less than 0.3 µm in PV and 10 nm in Sa, respectively.