RESUMO
X-ray photoelectron spectroscopy, reflection-absorption infrared spectroscopy, and temperature-programmed reaction/desorption have been employed to investigate the reaction of CH3-CHCl-C(=O)Cl on Cu (100), with the aid of density functional theory (DFT) calculations. Experimentally, CH3-CH=C=O (methylketene) is found to be the product from the dechlorination of CH3-CHCl-C(=O)Cl on Cu(100) at 120 K. The CH3-CH=C=O generated on the surface would dimerize to form 2,4-dimethylcyclobutane-1,3-dione below 180 K. In agreement with the experimental findings, our DFT molecular dynamics simulations demonstrate that the dechlorination of CH3-CHCl-C(=O)Cl, resulting in CH3-CH=C=O and two Cl atoms, occurs readily, completing within 0.6 ps at 300 K. The simulations also indicate that the cleavage of the CH-Cl bond precedes that of the C(=O)-Cl bond. The static DFT calculations suggest that the dimerization of CH3-CH=C=O primarily occurs through the coupling of two C=C bonds, which has a lower barrier of 38.08 kJ mol-1 compared to the 69.05 kJ mol-1 barrier for C=C + C=O coupling.
RESUMO
Flexible sensors based on laser-induced graphene (LIG) are widely used in wearable personal devices, with the morphology and lattice arrangement of LIG the key factors affecting their performance in various applications. In this study, femtosecond-laser-induced MXene-composited graphene (LIMG) is used to improve the electrical conductivity of graphene by incorporating MXene, a 2D material with a high concentration of free electrons, into the LIG structure. By combining pump-probe detection, laser-induced breakdown spectroscopy (LIBS), and density functional theory (DFT) calculations, the morphogenesis and lattice structuring principles of LIMG is explored, with the results indicating that MXene materials are successfully embedded in the graphene lattice, altering both their morphology and electrical properties. The structural sparsity and electrical conductivity of LIMG composites (up to 3187 S m-1) are significantly enhanced compared to those of LIG. Based on these findings, LIMG has been used in wearable electronics. LIMG electrodes are used to detect uric acid, with a minimum detection limit of 2.48 µM. Additionally, LIMG-based pressure and bending sensors have been successfully used to monitor human limb movement and pulse. The direct in situ femtosecond laser patterning synthesis of LIMG has significant implications for developing flexible wearable electronic sensors.
RESUMO
Three-dimensional (3D) porous carbon materials have great potential for fabricating flexible tunable broadband absorbers owing to their high electrical conductivity, strong dielectric loss, and unique microstructure. Herein, we introduce an innovative method for synthesizing 3D porous graphene that incorporates advanced tuning and encapsulation processes to augment its functional efficacy. Through the modulation of both thermal and nonthermal interactions between a femtosecond (fs) laser and a polydimethylsiloxane (PDMS) film, we have synergistically fine-tuned the surface morphology and lattice properties of 3D porous graphene. This approach enabled us to create a flexible terahertz (THz) absorber with customizable characteristics, boasting an impressive absorbance range of 80%-99% in the 0.4-1.0 THz spectrum, alongside a peak reflection loss (RL) of up to 35.6 dB. Furthermore, we have successfully demonstrated the production of photoinduced 3D porous graphene within a PDMS film, which serves as both a carbon precursor and protective layer. This simplifies the conventional packaging process. These devices exhibit a RL of up to 41.6 dB and an absorption bandwidth of 2.5 THz (0.6-3.1 THz). Our study presents a production methodology for high-performance, flexible THz absorbers, offering a straightforward and innovative solution for the rapid development of sophisticated, flexible THz absorbing materials.
RESUMO
High-temperature-resistant integrated circuits with excellent flexibility, a high integration level (nanoscale transistors), and low power consumption are highly desired in many fields, including aerospace. Compared with conventional SiC high-temperature transistors, transistors based on two-dimensional (2D) MoS2 have advantages of superb flexibility, atomic scale, and ultralow power consumption. However, MoS2 cannot survive at high temperature and drastically degrades above 200 °C. Here, we report MoS2 field-effect transistors (FETs) with top/bottom hexagonal boron nitride (h-BN) encapsulation and graphene electrodes. With the protection of the h-BN/h-BN structure, the devices can survive at much higher temperature (≥500 °C in air) than those of the MoS2 devices ever reported, which provides us an opportunity to explore the electrical properties and working mechanism of MoS2 devices at high temperature. Unlike the relatively low-temperature situation, the on/off ratio and subthreshold swing of MoS2 FETs show drastic variation at elevated temperature due to the injection of thermal emission carriers. Compared with metal electrode, devices with a graphene electrode demonstrate superior performance at high temperature (â¼1-order-larger current on/off ratio, 3-7 times smaller subthreshold swing, and 5-9 times smaller threshold voltage shift). We further realize that the flexible CMOS NOT gate based on the above technique, and demonstrate logic computing at 550 °C. This work may stimulate the fundamental research of properties of 2D materials at high temperature, and also creates conditions for next-generation flexible harsh-environment-resistant integrated circuits.
RESUMO
For the autonomous surface vehicle (ASV) planning problem, an enhanced A* method incorporating encrypted memory database for ASV efficient local path planning is proposed. Considering the current various path planning problems mostly use methods with high time complexity, such as neural networks, we select the A* algorithm with low time complexity as the basis. To speed up the path planning rate and further improve the real-time and realistic algorithm, this paper modifies the heuristic function of the A* algorithm by combining the motion mode of ASV. In response to the problem that the target point is far from the detection, we improve the target point design mechanism and create a new temporary target point within the detection range. In addition, the algorithm incorporates a memory database, which can record commonly used waters or retain the environmental path of navigated waters as a priori information. When the same waters are reencountered, the memory database information can be read directly to complete the navigation. Moreover, the memory database is encrypted to prevent information leakage. Finally, a simulation environment is built to verify the effectiveness of the proposed algorithm by comparison with some existing algorithms.
RESUMO
BACKGROUND: This study aimed to investigate the risk factors for nonrecovery of left ventricular ejection fraction (LVEF) during follow-up in patients with acute myocardial infarction (AMI) who underwent percutaneous coronary intervention (PCI) combined with reduced LVEF, and establish and verify a risk prediction model based on these factors. METHODS: In this study, patients with AMI who underwent PCI in a high-volume PCI center between December 2018 and December 2021 were consecutively enrolled, screened, and randomly assigned to the model establishment and validation cohorts. A predictive model method based on least absolute shrinkage and selection operator regression was used for establishment and validation. RESULTS: Cardiac troponin I, myoglobin, left ventricular end-diastolic dimension, multivessel disease, and no-reflow were identified as potential predictors of LVEF recovery failure. The areas under the curve were 0.703 and 0.665 in the model establishment and validation cohorts, respectively, proving that the prediction model had some predictive ability. The calibration curves of the two cohorts showed good agreement with those of the nomogram model. In addition, the decision curve analysis showed that the model had a net clinical benefit. CONCLUSION: This prediction model can assess the risk of nonrecovery of LVEF in patients with AMI undergoing PCI combined with LVEF reduction during follow-up, and conveniently screen high-risk patients with nonrecoverable LVEF early.
Assuntos
Infarto do Miocárdio , Intervenção Coronária Percutânea , Humanos , Volume Sistólico , Função Ventricular Esquerda , Diástole , Infarto do Miocárdio/diagnóstico , Infarto do Miocárdio/terapiaRESUMO
In this paper, an angular position sensor (APS) designed for a resonant miniaturized scanning mirror (M-SM) is presented. The APS operates based on the principle of differential variable capacitance, significantly expanding the detectable bandwidth from a few hertz to several kilohertz. By modeling the motion characteristics, the sampling rates of the biaxial scanning angles are 1473.6 times and 539.4 times higher than those of conventional sensors. Initially, the motion characteristics model is presented as a simple harmonic motion, converting sampled capacitance into continuous capacitance. Subsequently, the nonparallel state of the M-SM and sensor is transformed into a parallel state through the space coordinate system transformation. Furthermore, a 2D nonlinear angle transfer function is developed to convert the differential capacitance into an angle, thereby mitigating the nonlinear errors resulting from large angles. Achieving an accuracy better than 0.014°, the measuring range expands from ±0.5729° (±10 mrad) to ±5.026° ( ± 87 mrad). Additionally, the capturing mode and tracking mode are proposed to monitor real-time angular changes of the M-SM with an accuracy of 0.017°. High-precision APSs have enhanced beam pointing accuracy and resolution and can thereby be used to advance the development of laser components, including light detection and ranging (LiDAR).
RESUMO
One-shot organ segmentation (OS2) aims at segmenting the desired organ regions from the input medical imaging data with only one pre-annotated example as the reference. By using the minimal annotation data to facilitate organ segmentation, OS2 receives great attention in the medical image analysis community due to its weak requirement on human annotation. In OS2, one core issue is to explore the mutual information between the support (reference slice) and the query (test slice). Existing methods rely heavily on the similarity between slices, and additional slice allocation mechanisms need to be designed to reduce the impact of the similarity between slices on the segmentation performance. To address this issue, we build a novel support-query interactive embedding (SQIE) module, which is equipped with the channel-wise co-attention, spatial-wise co-attention, and spatial bias transformation blocks to identify "what to look", "where to look", and "how to look" in the input test slice. By combining the three mechanisms, we can mine the interactive information of the intersection area and the disputed area between slices, and establish the feature connection between the target in slices with low similarity. We also propose a self-supervised contrastive learning framework, which transforms knowledge from the physical position to the embedding space to facilitate the self-supervised interactive embedding of the query and support slices. Comprehensive experiments on two large benchmarks demonstrate the superior capacity of the proposed approach when compared with the current alternatives and baseline models.
RESUMO
Cascaded metasurfaces can exhibit powerful dynamic light manipulation by mechanically tuning the far-field interactions in the layers. However, in most current designs, the metasurfaces are separated by gaps smaller than a wavelength to form a total phase profile, representing the direct accumulation of the phase profiles of each layer. Such small gap sizes may not only conflict with the far-field conditions but also pose great difficulties for practical implementations. To overcome this limitation, a design paradigm taking advantage of a ray-tracing scheme that allows the cascaded metasurfaces to operate optimally at easily achievable gap sizes is proposed. Enabled by the relative lateral translation of two cascaded metasurfaces, a continuous two-dimensional (2D) beam-steering device for 1064 nm light is designed as a proof of concept. Simulation results demonstrate tuning ranges of ±45° for biaxial deflection angles within ±3.5 mm biaxial translations, while keeping the divergence of deflected light less than 0.007°. The experimental results agree well with theoretical predictions, and a uniform optical efficiency is observed. The generializeddesign paradigm can pave a way towards myriad tunable cascaded metasurface devices for various applications, including but not limited to light detection and ranging (LiDAR) and free space optical communication.
RESUMO
OBJECTIVES: Autoimmune hepatitis (AIH) is an aberrant autoimmune condition mediated by T cell abnormality, which may cause fulminant liver failure and persistent liver injury. This study aimed to disclose the histopathological and functional engagement of interleukin (IL)-26, a potent inflammation mediator, in AIH disease progression. METHODS: We conducted immunohistochemical staining on liver biopsy samples to evaluate intrahepatic expression of IL-26. Cellular sources of hepatic IL-26 were detected by confocal microscopy. Flow cytometry was employed to determine the immunological alterations of CD4+ and CD8+ T cells following in vitro IL-26 treatment on primary peripheral blood mononuclear cells from healthy controls. RESULTS: Statistically significant increase in IL-26 level was observed in AIH (n = 48) liver samples in comparison with patients having chronic hepatitis B (n = 25), nonalcoholic fatty liver disease (n = 18), and healthy donors for living donor liver transplantation (n = 10). The number of intrahepatic IL-26+ cells was positively correlated with histological and serological severity. An immunofluorescence staining indicated that liver-infiltrating CD4+ T cells, CD8+ T cells, and CD68+ macrophages orchestrated IL-26 secretion in AIH. Both CD4+ and CD8+ T cells demonstrated effective activation, lytic, and proinflammatory functions upon IL-26 stimulation. CONCLUSION: We observed elevated IL-26 in AIH liver which promoted T cell activation and cytotoxic capacity, indicating a therapeutic potential of IL-26 intervention in AIH.
Assuntos
Hepatite Autoimune , Transplante de Fígado , Humanos , Linfócitos T CD8-Positivos/metabolismo , Linfócitos T CD8-Positivos/patologia , Leucócitos Mononucleares/metabolismo , Leucócitos Mononucleares/patologia , Fígado/patologia , Doadores VivosRESUMO
Quantitative polymerase chain reaction as a powerful tool for DNA detection has been pivotal to a vast range of applications, including disease screening, food safety assessment, environmental monitoring, and many others. However, the essential target amplification step in combination with fluorescence readout poses a significant challenge to rapid and streamlined analysis. The discovery and engineering of the clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) technology have recently paved the way for a novel approach to nucleic acid detection, but the majority of current CRISPR-mediated DNA detection platforms are limited by insufficient sensitivity and still require target preamplification. Herein, we report a CRISPR-Cas12a-mediated graphene field-effect transistor (gFET) array, named CRISPR Cas12a-gFET, for amplification-free, ultrasensitive, and reliable detection of both single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) targets. CRISPR Cas12a-gFET leverages the multiturnover trans-cleavage activity of CRISPR Cas12a for intrinsic signal amplification and ultrasensitivity of gFET. As demonstrated, CRISPR Cas12a-gFET achieves a limit of detection of 1 aM for the ssDNA human papillomavirus 16 synthetic target and 10 aM for the dsDNA Escherichia coli plasmid target without target preamplification. In addition, an array of 48 sensors on a single 1.5 cm × 1.5 cm chip is employed to improve data reliability. Finally, Cas12a-gFET demonstrates the capability to discriminate single-nucleotide polymorphisms. Together, the CRISPR Cas12a-gFET biosensor array provides a detection tool for amplification-free, ultrasensitive, reliable, and highly specific DNA detections.
Assuntos
Sistemas CRISPR-Cas , Grafite , Humanos , Sistemas CRISPR-Cas/genética , Polimorfismo de Nucleotídeo Único , Reprodutibilidade dos Testes , DNA/genética , DNA de Cadeia Simples/genética , Escherichia coli/genética , NucleotídeosRESUMO
Flow cytometers are instruments used for the rapid quantitative analysis of cell suspension. Traditional flow cytometry uses multi-channel filters to detect fluorescence, whereas full-spectrum fluorescence based on dispersion detection is a more effective and accurate method. The application of various dispersion schemes in flow cytometry spectroscopy has been studied. From the perspective of modern detectors and demand for the miniaturization of flow cytometry, prism dispersion exhibits higher and more uniform light energy utilization, meaning that it is a more suitable dispersion method for small flow cytometers, such as microfluidic flow cytometers. Prism dispersion designs include the size, number, and placement of prisms. By deducing the formula of the final position of light passing through the prism and combining it with the formula of transmittance, the design criteria of the top angle and the incident angle of the prism in pursuit of the optimum transmittance and dispersion index can be obtained. Considering the case of multiple prisms, under the premise of pursuing a smaller size, the optimal design criteria for dispersion system composed of multiple prisms can be obtained. The design of prism dispersion fluorescence detection was demonstrated with a microfluidic flow cytometer, and the effectiveness of the design results was verified by microsphere experiments and practical biological experiments. This design criterion developed in this study is generally applicable to spectral flow cytometers.
RESUMO
Polymerase chain reaction (PCR)-based nucleic acid testing has played a critical role in disease diagnostics, pathogen surveillance, and many more. However, this method requires a long turnaround time, expensive equipment, and trained personnel, limiting its widespread availability and diagnostic capacity. On the other hand, the clustered regularly interspaced short palindromic repeats (CRISPR) technology has recently demonstrated capability for nucleic acid detection with high sensitivity and specificity. CRISPR-mediated biosensing holds great promise for revolutionizing nucleic acid testing procedures and developing point-of-care diagnostics. This review focuses on recent developments in both fundamental CRISPR biochemistry and CRISPR-based nucleic acid detection techniques. Four ongoing research hotspots in molecular diagnostics-target preamplification-free detection, microRNA (miRNA) testing, non-nucleic-acid detection, and SARS-CoV-2 detection-are also covered.
Assuntos
Técnicas Biossensoriais , COVID-19 , MicroRNAs , Humanos , Sistemas CRISPR-Cas , Patologia Molecular , SARS-CoV-2 , Teste para COVID-19RESUMO
Spatial light modulators based on metasurfaces have attracted great attention due to their abilities of amplitude and phase modulation. However, the traditional one degree of freedom (1-DOF) tunable metasurfaces are limited by incomplete phase coverage and coupled amplitude and phase modulation. Here, we propose an optimization method for 2-DOF tunable metasurfaces within the framework of temporal coupled mode theory. As a validation of the proposed method, we present a germanium antimony tellurium (GST)-alloy-based 2-DOF tunable reflective metasurface. Full-wave simulation shows that independent modulation of amplitude and phase is realized with full phase coverage and amplitude range from 0 to 0.55. Our proposed design scheme for a 2-DOF tunable metasurface may facilitate the development of high-performance metasurface devices.
RESUMO
Clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 13 (Cas13) has been rapidly developed for nucleic-acid-based diagnostics by using its characteristic collateral activity. Despite the recent progress in optimizing the Cas13 system for the detection of nucleic acids, engineering Cas13 protein with enhanced collateral activity has been challenging, mostly because of its complex structural dynamics. Here we successfully employed a novel strategy to engineer the Leptotrichia wadei (Lwa)Cas13a by inserting different RNA-binding domains into a unique active-site-proximal loop within its higher eukaryotes and prokaryotes nucleotide-binding domain. Two LwaCas13a variants showed enhanced collateral activity and improved sensitivity over the wild type in various buffer conditions. By combining with an electrochemical method, our variants detected the SARS-CoV-2 genome at attomolar concentrations from both inactive viral and unextracted clinical samples, without target preamplification. Our engineered LwaCas13a enzymes with enhanced collateral activity are ready to be integrated into other Cas13a-based platforms for ultrasensitive detection of nucleic acids.
Assuntos
COVID-19 , Ácidos Nucleicos , Humanos , SARS-CoV-2/genética , Ácidos Nucleicos/genética , Genoma , Sistemas CRISPR-Cas/genéticaRESUMO
Terahertz (THz) wave manipulation, especially the beam deflection, plays an essential role in various applications, such as next-generation communication, space exploration, and high-resolution imaging. Current THz optical components and devices are hampered by their large bulk sizes and passive responses, limiting the development of high-performance, miniaturized THz microsystems. Tunable metasurfaces offer a powerful dynamic optical platform for controlling the propagation of electromagnetic waves. In this article, we presented a mechanically tunable metasurface (MTM), which can achieve terahertz beam deflection and vary the intensity of the anomalous reflected terahertz wave by changing the air gap between the metallic resonator (MR) array with phase discontinuities and Au ground plane. The absence of lossy spacer materials substantially enhances deflection efficiency. The device was fabricated by a combination of the surface and bulk-micromachining processes. The THz beam steering capability was characterized using terahertz time domain spectroscopy. When the air gap is 50 µm, the maximum deflection coefficient reaches 0.60 at 0.61 THz with a deflection angle of ~44.5°, consistent with theoretical predictions. We further established an electrically tunable miniaturized THz device for dynamic beam steering by introducing a micro voice coil motor to control the air gap continuously. It is shown that our designed MTM demonstrates a high modulation depth of deflection coefficient (~ 62.5%) in the target steered angle at the operating frequency. Our results showcase the potential of the proposed MTM as a platform for high-efficiency THz beam manipulation.
RESUMO
The integrated device for energy supply and sensing (IDESS) is a potential candidate for relieving the energy and space burdens caused by the rising integration degrees of microsystems. In this article, we propose a force sensor based on an interdigital supercapacitor (IDTSC). The capacitance and internal resistance of the IDTSC change under external loads, resulting in a transient current fluctuation at a constant bias voltage, which can be used to sense external force/acceleration. The IDTSC showed a specific energy and specific power of 4.16 Wh/kg and 22.26 W/kg (at 0.1 A/g), respectively, which could maintain an essential energy supply. According to the simulation analysis, the designed IDTSC's current response exhibited good linearity with the external force. In addition, benefiting from its light weight and the applied gel electrolytes, the IDTSC showed good high-g impact sensing performance (from 9.9 × 103× g to 3.2 × 104× g). This work demonstrated the feasibility of realizing an integrated energy supply and force-sensing device by empowering energy storage devices with sensing capabilities.
Assuntos
Aceleração , Eletricidade , Capacitância Elétrica , Simulação por ComputadorRESUMO
Real-time tracking of fast-moving targets has been utilized in various fields. However, the tracking performance of image-based systems for fast-moving targets is still limited by the huge data throughput and computation. In this study, an image-free target tracking system utilizing a digital micromirror device (DMD) is proposed. The proposed system effectively combines the dual-pixel measurement and window complementary modulation, and the alternating interpolation Kalman filter is implemented to fully use the performance of the DMD and maximize the update rate of the system. The accuracy of the proposed system at the maximum update rate of 22.2 kHz can achieve 0.1 pixels according to the experimental results. Meanwhile, we experimentally demonstrated that the accuracy of the proposed image-free target tracking system is within 0.3 pixels at a maximal velocity of 2 × 104 pixel/s at 22.2 kHz by evaluating the performance of the proposed image-free target tracking system when tracking fast-moving targets with different maximal velocity.
RESUMO
WiFi energy harvesting is a promising solution for powering microsensors and microsystems through collecting electromagnetic (EM) energies that exist everywhere in modern daily lives. In order to harvest EM energy, we proposed a metamaterial-inspired antenna (MIA) based on the resonant magnetic dipole operating in the WiFi bands. The MIA consists of two metallic split-ring resonators (SRRs), separated by an FR4 dielectric layer, in the broadside coupled configuration. The incident EM waves excite surface currents in the coupled SRRs, and the energy is oscillating between them due to near-field coupling. By varying the vertical distance of the two SRRs, we may achieve impedance matching without complicated matching networks. Collected EM energy can be converted to DC voltages via a rectifier circuit at the output of the coupling coil. Measured results demonstrate that the designed MIA may resonate at 2.4 GHz with a deep-subwavelength form factor (14 mm×14 mm×1.6 mm). The WiFi energy-harvesting capability of the proposed MIA with an embedded one-stage Dickson voltage multiplier has also been evaluated. A rectified DC voltage is approximately 500 mV when the MIA is placed at a distance of 2 cm from the WiFi transmit antenna with a 9 dBm transmitting power. The proposed compact MIA in this paper is of great importance for powering future distributed microsystems.
RESUMO
This article is devoted to dealing with exponential synchronization for inertial neural networks (INNs) with heterogeneous time-varying delays (HTVDs) under the framework of aperiodic sampling and state quantization. First, by taking the effect of aperiodic sampling and state quantization into consideration, a novel quantized sampled-data (QSD) controller with time-varying control gain is designed to tackle the exponential synchronization of INNs. Second, considering the available information of the lower and upper bounds of each HTVD, a refined Lyapunov-Krasovskii functional (LKF) is proposed. Meanwhile, an improved looped-functional method is utilized to fully capture the characteristic of practical sampling patterns and further relax the positive definiteness requirement for LKF. Consequently, less conservative exponential synchronization conditions with extra flexibility are derived. Finally, a numerical example is employed to demonstrate the effectiveness and advantages of the proposed synchronization method.