Reversible Photoluminescence Tuning by Defect Passivation via Laser Irradiation on Aged Monolayer MoS2.

Atomically thin (1L)-MoS2 emerged as a direct band gap semiconductor with potential optical applications. The photoluminescence (PL) of 1L-MoS2 degrades due to aging-related defect formation. The passivation of these defects leads to substantial improvement in optical properties. Here, we report the enhancement of PL on aged 1L-MoS2 by laser treatment. Using photoluminescence and Raman spectroscopy in a gas-controlled environment, we show that the enhancement is associated with efficient adsorption of oxygen on existing sulfur vacancies preceded by removal of adsorbates from the sample's surface. Oxygen adsorption depletes negative charges, resulting in suppression of trions and improved neutral exciton recombination. The result is a 6- to 8-fold increase in PL emission. The laser treatment in this work does not cause any measurable damage to the sample as verified by Raman spectroscopy, which is important for practical applications. Surprisingly, the observed PL enhancement is reversible by both vacuum and ultrafast femtosecond excitation. While the former approach allows switching a designed micropattern on the sample ON and OFF, the latter provides a controllable mean for accurate PL tuning, which is highly desirable for optoelectronic and gas sensing applications.

Room-Temperature Electron-Hole Liquid in Monolayer MoS2.

Excitons in semiconductors are usually noninteracting and behave like an ideal gas, but may condense to a strongly correlated liquid-like state, i.e., electron-hole liquid (EHL), at high density and appropriate temperature. An EHL is a macroscopic quantum state with exotic properties and represents the ultimate attainable charge excitation density in steady states. It bears great promise for a variety of fields such as ultra-high-power photonics and quantum science and technology. However, the condensation of gas-like excitons to an EHL has often been restricted to cryogenic temperatures, which significantly limits the prospect of EHLs for use in practical applications. Herein we demonstrate the formation of an EHL at room temperature in monolayer MoS2 by taking advantage of the monolayer's extraordinarily strong exciton binding energy. This work demonstrates the potential for the liquid-like state of charge excitations to be a useful platform for the studies of macroscopic quantum phenomena and the development of optoelectronic devices.

Dense Electron-Hole Plasma Formation and Ultralong Charge Lifetime in Monolayer MoS2 via Material Tuning.

Many-body interactions in photoexcited semiconductors can bring about strongly interacting electronic states, culminating in the fully ionized matter of electron-hole plasma (EHP) and electron-hole liquid (EHL). These exotic phases exhibit unique electronic properties, such as metallic conductivity and metastable high photoexcitation density, which can be the basis for future transformative applications. However, the cryogenic condition required for its formation has limited the study of dense plasma phases to a purely academic pursuit in a restricted parameter space. This paradigm can potentially change with the recent experimental observation of these phases in atomically thin MoS2 and MoTe2 at room temperature. A fundamental understanding of EHP and EHL dynamics is critical for developing novel applications on this versatile layered platform. In this work, we studied the formation and dissipation of EHP in monolayer MoS2. Unlike previous results in bulk semiconductors, our results reveal that electromechanical material changes in monolayer MoS2 during photoexcitation play a significant role in dense EHP formation. Within the free-standing geometry, photoexcitation is accompanied by an unconstrained thermal expansion, resulting in a direct-to-indirect gap electronic transition at a critical lattice spacing and fluence. This dramatic altering of the material's energetic landscape extends carrier lifetimes by 2 orders of magnitude and allows the density required for EHP formation. The result is a stable dense plasma state that is sustained with modest optical photoexcitation. Our findings pave the way for novel applications based on dense plasma states in two-dimensional semiconductors.

The Role of FRET in Non-Fullerene Organic Solar Cells: Implications for Molecular Design.

Non-fullerene acceptors (NFAs) have been demonstrated to be promising candidates for highly efficient organic photovoltaic (OPV) devices. The tunability of absorption characteristics of NFAs can be used to make OPVs with complementary donor-acceptor absorption to cover a broad range of the solar spectrum. However, both charge transfer from donor to acceptor moieties and energy (energy) transfer from high-bandgap to low-bandgap materials are possible in such structures. Here, we show that when charge transfer and exciton transfer processes are both present, the coexistence of excitons in both domains can cause a loss mechanism. Charge separation of excitons in a low-bandgap material is hindered due to exciton population in the larger bandgap acceptor domains. Our results further show that excitons in low-bandgap material should have a relatively long lifetime compared to the transfer time of excitons from higher bandgap material in order to contribute to the charge separation. These observations provide significant guidance for design and development of new materials in OPV applications.

Monitoring Charge Separation Processes in Quasi-One-Dimensional Organic Crystalline Structures.

We perform the transient absorption spectroscopy experiments to investigate the dynamics of the low-energy collective electron-hole excitations in α-copper phthalocyanine thin films. The results are interpreted in terms of the third-order nonlinear polarization response function. It is found that, initially excited in the molecular plane, the intramolecular Frenkel exciton polarization reorients with time to align along the molecular chain direction to form coupled Frenkel-charge-transfer exciton states, the eigenstates of the one-dimensional periodic molecular lattice. The process pinpoints the direction of the charge separation in α-copper phthalocyanine and similar organic molecular structures. Being able to observe and monitor such processes is important both for understanding the physical principles of organic thin film solar energy conversion device operation and for the development of organic optoelectronics in general.

Efficient Generation of Long-Lived Triplet Excitons in 2D Hybrid Perovskite.

Triplet excitons form in quasi-2D hybrid inorganic-organic perovskites and diffuse over 100 nm before radiating with >11% photoluminescence quantum efficiency (PLQE) at low temperatures.

Charge Generation Dynamics in Efficient All-Polymer Solar Cells: Influence of Polymer Packing and Morphology.

All-polymer solar cells exhibit rapid progress in power conversion efficiency (PCE) from 2 to 7.7% over the past few years. While this improvement is primarily attributed to efficient charge transport and balanced mobility between the carriers, not much is known about the charge generation dynamics in these systems. Here we measured exciton relaxation and charge separation dynamics using ultrafast spectroscopy in polymer/polymer blends with different molecular packing and morphology. These measurements indicate that preferential face-on configuration with intermixed nanomorphology increases the charge generation efficiency. In fact, there is a direct quantitative correlation between the free charge population in the ultrafast time scales and the external quantum efficiency, suggesting not only the transport but also charge generation is key for the design of high performance all polymer solar cells.

A femtosecond study of the anomaly in electron injection for dye-sensitized solar cells: the influence of isomerization employing Ru(II) sensitizers with anthracene and phenanthrene ancillary ligands.

In this study, an intriguing difference caused by structural isomerization based on anthracene and phenanthrene stilbazole type ancillary ligands in Ru(ii) sensitizers for dye sensitized solar cells (DSCs) has been investigated using femtosecond transient absorption spectroscopy. Both anthracene and phenanthrene based sensitizers HD-7 and HD-8, respectively, resulted in a similar extinction coefficient, photophysical and thermodynamic free energy of electron injection and dye regeneration as measured by UV-Vis, excited state lifetime and cyclic voltammetry measurements, respectively. However, TiO2 adsorbed HD-7 resulted in up to 45% less photocurrent density than HD-8 although photovoltage was similar owing to comparable thermodynamic characteristics. It was obvious from the measurement of incident photon to current conversion efficiency (IPCE) that excited electrons in HD-7 are prone to internal energy loss before injection into the TiO2 conduction band. Analysis of photo-induced spectral features measured by femtosecond transient absorption spectroscopy showed that excited electrons in HD-7 are prone to ISC (intersystem crossing) much more than HD-8 and those triplet electrons are not injected into TiO2 efficiently. Interestingly, from impedance measurements, HD-7 showed higher recombination resistance than HD-8 and N719, but a shorter lifetime for electrons injected into the TiO2 conduction band.

More stable and more efficient alternatives of Z-907: carbazole-based amphiphilic Ru(II) sensitizers for dye-sensitized solar cells.

Here we report two novel amphiphilic Ru(II) heteroleptic bipyridyl complexes, HD-14 and HD-15, compared to previously reported NCSU-10. We have combined the strong electron donor characteristics of carbazole and the hydrophobic nature of different long alkyl chains, C7, C18 and C2 (NCSU-10), tethered to N-carbazole to study their influence on photocurrent, photovoltage and long term stability for dye-sensitized solar cells. Photon harvesting efficiency and electron donating characteristics of carbazole-based ancillary ligands were found to be unaffected by different alkyl chain lengths. However, a slight drop in the Voc of HD-14 and HD-15 was observed compared to that of NCSU-10. It was found by nanosecond flash photolysis transient absorption (TA) measurements that the faster the dye regeneration the higher the photocurrent density response, and the dye regeneration time was found to be 2.6, 3.6, and 3.7 µs for HD-14, HD-15, and N719 dyes, respectively. The difference in the amplitude of the transient absorption (TA) signal of the oxidized dye as measured by femtosecond TA studies is in excellent agreement with the photocurrent generated, which was in the following order HD-14 > HD-15 > N719. Under 1000 h light soaking conditions, HD-15 maintained up to 98% (only 2% loss) of the initial power conversion efficiency compared to 8% loss for HD-14 and 22% loss in the power conversion efficiency for NCSU-10. HD-15 was strikingly stable to light soaking conditions when employed in the presence of an ionic liquid electrolyte, which paves the way for widespread applications of dye-sensitized solar cells with long term stability. The total power conversion efficiency (η) was 9.27% for HD-14 and 9.17% for HD-15 compared to 8.92% for N719.