Optimization of Higher-Energy Collisional Dissociation Fragmentation Energy for Intact Protein-Level Tandem Mass Tag Labeling.

Isobaric chemical tag labeling (e.g., TMT) is a commonly used approach in quantitative proteomics, and quantification is enabled through detection of low-mass reporter ions generated after MS2 fragmentation. Recently, we have introduced and optimized an intact protein-level TMT labeling platform that demonstrated >90% labeling efficiency in complex samples with top-down proteomics. Higher-energy collisional dissociation (HCD) is commonly utilized for isobaric tag-labeled peptide fragmentation because it produces accurate reporter ion intensities and avoids loss of low mass ions. HCD energies have been optimized for isobaric tag labeled-peptides but have not been systematically evaluated for isobaric tag-labeled intact proteins. In this study, we report a systematic evaluation of normalized HCD fragmentation energies (NCEs) on TMT-labeled HeLa cell lysate using top-down proteomics. Our results suggested that reporter ions often result in higher ion intensities at higher NCEs. Optimal fragmentation of intact proteins for identification, however, required relatively lower NCE. We further demonstrated that a stepped NCE scheme with energies from 30% to 50% resulted in optimal quantification and identification of TMT-labeled HeLa proteins. These parameters resulted in an average reporter ion intensity of ∼4E4 and average proteoform spectrum matches (PrSMs) of >1000 per RPLC-MS/MS run with a 1% false discovery rate (FDR) cutoff.

A benchmarking protocol for intact protein-level Tandem Mass Tag (TMT) labeling for quantitative top-down proteomics.

Isobaric chemical tag labeling for quantification of intact proteins in complex samples is limited due to the tendency of intact proteins precipitate under labeling conditions and increased sample complexity as a result of side products (i.e., incomplete labeling or labeling of unintended residues). To reduce precipitation under labeling conditions, we developed a technique to remove large proteoforms that allowed for the labeling and characterization of small proteoforms (<35 kDa) using top-down proteomics. We also systematically optimized protein-level Tandem Mass Tag (TMT) labeling conditions to obtain optimal labeling parameters for complex samples. Here, we present a benchmarking protocol for protein-level TMT labeling for quantitative top-down proteomics, including complex intact protein sample preparation, protein-level TMT labeling, top-down LC/MS analysis, and TMT reporter ion quantification.•An optimized protocol for protein-level TMT labeling in complex sample.•Limits production of incorrectly labeled side products for minimization of spectral complexity.•A guideline for isobaric chemical tag quantification in top-down proteomics.

Optimization of protein-level tandem mass tag (TMT) labeling conditions in complex samples with top-down proteomics.

Isobaric chemical tag labels (e.g., iTRAQ and TMT) have been extensively utilized as a standard quantification approach in bottom-up proteomics, which provides high multiplexing capacity and enables MS2-level quantification while not complicating the MS1 scans. We recently demonstrated the feasibility of intact protein TMT labeling for the identification and quantification with top-down proteomics of smaller intact proteoforms (<35 kDa) in complex biological samples through the removal of large proteins prior to labeling. Still, the production of side products during TMT labeling (i.e., incomplete labeling or labeling of unintended residues) complicated the analysis of complex protein samples. In this study, we systematically evaluated the protein-level TMT labeling reaction parameters, including TMT-to-protein mass ratio, pH/concentration of quenching buffer, protein concentration, reaction time, and reaction buffer. Our results indicated that: (1) high TMT-to-protein mass ratio (e.g., 8:1, 4:1), (2) high pH/concentration of quenching buffer (pH > 9.1, final hydroxylamine concentration >0.3%), and (3) high protein concentration (e.g., > 1.0 µg/µL) resulted in optimal labeling efficiency and minimized production of over/underlabeled side products. >90% labeling efficiency was achieved for E. coli cell lysate after optimization of protein-level TMT labeling conditions. In addition, a double labeling approach was developed for efficiently labeling limited biological samples with low concentrations. This research provides practical guidance for efficient TMT labeling of complex intact protein samples, which can be readily adopted in the high-throughput quantification top-down proteomics.

RPLC-RPLC-MS/MS for Proteoform Identification.

Top-down proteomics methods have a distinct advantage over bottom-up methods in that they analyze intact proteins rather than digested peptides which can result in loss of information regarding the intact protein. However, the analysis of intact proteins using top-down proteomics methods has been impeded by the low resolution of typical separation approaches applied in bottom-up proteomics studies. To increase the coverage of intact proteomes, orthogonal, two-dimensional separation techniques have been developed to improve the separation efficiency; in this chapter, we describe a two-dimensional HPLC separation technique that utilizes a high-pH mobile phase in the first dimension followed by a low-pH mobile phase in the second dimension. This two-dimensional pH-based HPLC approach demonstrates increased separation efficiency of intact proteins and increased proteome coverage when compared to one-dimensional HPLC in the analysis of larger and lower abundance proteoforms.

Quantitative Top-Down Proteomics in Complex Samples Using Protein-Level Tandem Mass Tag Labeling.

Labeling approaches using isobaric chemical tags (e.g., isobaric tagging for relative and absolute quantification, iTRAQ and tandem mass tag, TMT) have been widely applied for the quantification of peptides and proteins in bottom-up MS. However, until recently, successful applications of these approaches to top-down proteomics have been limited because proteins tend to precipitate and "crash" out of solution during TMT labeling of complex samples making the quantification of such samples difficult. In this study, we report a top-down TMT MS platform for confidently identifying and quantifying low molecular weight intact proteoforms in complex biological samples. To reduce the sample complexity and remove large proteins from complex samples, we developed a filter-SEC technique that combines a molecular weight cutoff filtration step with high-performance size exclusion chromatography (SEC) separation. No protein precipitation was observed in filtered samples under the intact protein-level TMT labeling conditions. The proposed top-down TMT MS platform enables high-throughput analysis of intact proteoforms, allowing for the identification and quantification of hundreds of intact proteoforms from Escherichia coli cell lysates. To our knowledge, this represents the first high-throughput TMT labeling-based, quantitative, top-down MS analysis suitable for complex biological samples.

Development of an Online 2D Ultrahigh-Pressure Nano-LC System for High-pH and Low-pH Reversed Phase Separation in Top-Down Proteomics.

The development of novel high-resolution separation techniques is crucial for advancing the complex sample analysis necessary for high-throughput top-down proteomics. Recently, our group developed an offline 2D high-pH RPLC/low-pH RPLC separation method and demonstrated good orthogonality between these two RPLC formats. Specifically, ultrahigh-pressure long capillary column RPLC separation has been applied as the second dimensional low-pH RPLC separation for the improvement of separation resolution. To further improve the throughput and sensitivity of the offline approach, we developed an online 2D ultrahigh-pressure nano-LC system for high-pH and low-pH RPLC separations in top-down proteomics. An online microtrap column with a dilution setup was used to collect eluted proteins from the first dimension high-pH separation and inject the fractions for ultrahigh-pressure long capillary column low-pH RPLC separation in the second dimension. This automatic platform enables the characterization of 1000+ intact proteoforms from 5 µg of intact E. coli cell lysate in 10 online-collected fractions. Here, we have demonstrated that our online 2D pH RP/RPLC system coupled with top-down proteomics holds the potential for deep proteome characterization of mass-limited samples because it allows the identification of hundreds of intact proteoforms from complex biological samples at low microgram sample amounts.

Deep Intact Proteoform Characterization in Human Cell Lysate Using High-pH and Low-pH Reversed-Phase Liquid Chromatography.

Post-translational modifications (PTMs) play critical roles in biological processes and have significant effects on the structures and dynamics of proteins. Top-down proteomics methods were developed for and applied to the study of intact proteins and their PTMs in human samples. However, the large dynamic range and complexity of human samples makes the study of human proteins challenging. To address these challenges, we developed a 2D pH RP/RPLC-MS/MS technique that fuses high-resolution separation and intact protein characterization to study the human proteins in HeLa cell lysate. Our results provide a deep coverage of soluble proteins in human cancer cells. Compared to 225 proteoforms from 124 proteins identified when 1D separation was used, 2778 proteoforms from 628 proteins were detected and characterized using our 2D separation method. Many proteoforms with critically functional PTMs including phosphorylation were characterized. Additionally, we present the first detection of intact human GcvH proteoforms with rare modifications such as octanoylation and lipoylation. Overall, the increase in the number of proteoforms identified using 2DLC separation is largely due to the reduction in sample complexity through improved separation resolution, which enables the detection of low-abundance PTM-modified proteoforms. We demonstrate here that 2D pH RP/RPLC is an effective technique to analyze complex protein samples using top-down proteomics.

Identification and Quantification of Proteoforms by Mass Spectrometry.

A proteoform is a defined form of a protein derived from a given gene with a specific amino acid sequence and localized post-translational modifications. In top-down proteomic analyses, proteoforms are identified and quantified through mass spectrometric analysis of intact proteins. Recent technological developments have enabled comprehensive proteoform analyses in complex samples, and an increasing number of laboratories are adopting top-down proteomic workflows. In this review, some recent advances are outlined and current challenges and future directions for the field are discussed.