Synthesis of Two-Dimensional (Cu-S)n Metal-Organic Framework Nanosheets Applied as Peroxidase Mimics for Detection of Glutathione.

Facilely synthesized peroxidase-like nanozymes with high catalytic activity and stability may serve as effective biocatalysts. The present study synthesizes peroxidase-like nanozymes with multinuclear active sites using two-dimensional (2D) metal-organic framework (MOF) nanosheets and evaluates them for their practical applications. A simple method involving a one-pot bottom-up reflux reaction is developed for the mass synthesis of (Cu-S)n MOF 2D nanosheets, significantly increasing production quantity and reducing reaction time compared to traditional autoclave methods. The (Cu-S)n MOF 2D nanosheets with the unique coordination of Cu(I) stabilized in Cu-based MOFs demonstrate impressive activity in mimicking natural peroxidase. The active sites of the peroxidase-like activity of (Cu-S)n MOF 2D nanosheets were predominantly verified as Cu(I) rather than Cu(II) of other Cu-based MOFs. The cost-effective and long-term stability of (Cu-S)n MOF 2D nanosheets make them suitable for practical applications. Furthermore, the inhibition of the peroxidase-like activity of (Cu-S)n MOF nanosheets by glutathione (GSH) could provide a simple strategy for colorimetric detection of GSH against other amino acids. This work remarkably extends the utilization of (Cu-S)n MOF 2D nanosheets in biosensing, revealing the potential for 2D (Cu-S)n MOFs.

Rapid microwave synthesis of MOF microrods: Dispersive SPE coupled with UHPLC-MS/MS to determine fluoroquinolones in honey.

A novel sorbent Cu-S metal-organic framework (MOF) microrods was prepared for dispersive solid-phase extraction via microwave synthesis and used to determine 12 fluoroquinolones (FQs) in honey samples employing ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The best extraction efficiency was achieved by optimizing sample pH, sorbent quantity, eluent type/volume, and extraction and elution time. The proposed MOF exhibits advantages such as rapid synthesis time (20 min) and outstanding adsorption ability toward zwitterionic FQs. These advantages can be attributed to multiple interactions, including hydrogen bonding, π-π interaction, and hydrophobic interaction. The limits of detection of analytes were 0.005-0.045 ng g-1. Acceptable recoveries (79.3%-95.6%) were obtained under the optimal conditions. Precision (relative standard deviation, RSD) was <9.2%. These results demonstrate the utility of our sample preparation method and the high capacity of Cu-S MOF microrods for rapid and selective extraction of FQs from honey samples.

Metal Complex/ZnS-Modified Ni Foam as Magnetically Stirrable Photocatalysts: Roles of Redox Mediators and Carrier Dynamics Monitored by Operando Synchrotron X-ray Spectroscopy.

Magnetically stirrable photocatalysts binding the ZnS-decorated Ni foam with the metal complex cocatalyst as a redox mediator and light-absorbing composition were investigated. Loading metal complex can improve light absorption, surface hydrophilicity, interfacial charge migration, and H2 production activity. The variation of the metal valences of the composite photocatalysts in an operando environment (with sacrificial agent solution) with and without light irradiation was investigated by X-ray absorption near-edge structure (XANES) spectra and Fourier-transformed extended X-ray absorption fine structure (EXAFS) spectra to monitor the charge carrier dynamics of photocatalysis and explain how the macrocyclic Cu complex (CuC) acted as a redox mediator better than the Ni complex. The smaller valence difference of copper valence in ZS/CuC for dark and light states revealed that the Cu complex facilitates a reversible electron transfer between the ZnS photocatalyst and H+. Loading the Cu complex can improve the separation of photogenerated carriers by the redox couple of complexes, leading to a significantly improved photocatalytic H2 production activity of 8150 µmol h-1 g-1. The reactants can flow through these magnetically stirrable Ni foam-based photocatalysts by magnetic-field-driven stirring, which improves the contact between photocatalysts and the sacrificial agents. The operando synchrotron provides new insights for understanding the roles of redox mediators.

A frontier Zn- and N-rich complex grafted onto reduced graphene oxide for the electrocatalysis of dye-sensitized solar cells.

This paper proposes a novel µ-hydroxo-bridged dinuclear macrocyclic zinc complex, {[Zn(C10H20N8)]2(OH)}(BF4)3. The structure was determined by X-ray crystallography: Monoclinic, C2/c, a = 25.4632(6), b = 10.9818(3), c = 15.7522(4) Å, Z = 8, R1 = 0.0233, wR2 = 0.0557, based on reflections I > 2σ(I). The complex was successfully reacted with graphene oxide to form a µ-hydroxo-bridged dinuclear macrocyclic Zn complex/reduced graphene oxide composite. To evenly disperse the Zn- and N-rich complex onto the surface of the reduced graphene oxide, and to enhance the electrocatalytic property of the graphene composites, a soluble molecular grafting method was used here. The graphene-based composites were applied as the counter electrodes (CEs) of dye-sensitized solar cells. Current density-voltage measurements revealed that the conversion efficiency of the GO/Zn (1 : 10) sample was 7.78%, which was better than that of Pt CE (7.49%). GO/Zn (1 : 10) CE exhibited the lowest impedance (RCE = 9.90 Ω), which was better than that of Pt CE (RCE = 66.1 Ω), showing that GO/Zn CEs can reduce the impedance at the CE/electrolyte interface. The proposed method is simple, and the composite materials can potentially replace conventional Pt, optimizing efficiency and reducing production cost.

Sonochemical synthesis of iron-graphene oxide/honeycomb-like ZnO ternary nanohybrids for sensitive electrochemical detection of antipsychotic drug chlorpromazine.

We report a novel electrochemical sensor for the sensitive and selective determination of the antipsychotic drug chlorpromazine (CPZ) based on the iron (Fe) nanoparticles-loaded graphene oxide (GO-Fe)/three dimensional (3D) honeycomb-like zinc oxide (ZnO) nanohybrid modified screen printed carbon electrode (SPCE). The 3D hierarchical honeycomb-like ZnO was synthesized using a novel aqueous hydrothermal method and the GO-Fe/ZnO nanohybrid was prepared based on an inexpensive and fast sonochemical method using a high-intensity ultrasonic bath (Delta DC200H, 200 W, 40 KHz). Characterizations including scanning electron microscopy, elemental mapping, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy were carried out as part of this work. The electrocatalytic oxidation behavior of CPZ at various electrodes was investigated using the cyclic voltammetry technique, through which the GO-Fe/ZnO modified SPCE was identified as the best performing electrode. The quantitative determination of CPZ was then performed using the differential pulse voltammetry technique. The as-prepared GO-Fe/ZnO/SPCE sensor exhibited a quick and sensitive response towards the oxidation of CPZ with linear concentration ranges from 0.02 to 172.74 µM and 222.48 to 1047.74 µM. The modified SPCE sensor displayed a low detection limit (LOD) of 0.02 µM and a high sensitivity of 7.56 µA µM-1 cm-2. The proposed sensor also showed remarkable operational and storage stability, reproducibility, and repeatability. Furthermore, the practicability of the GO-Fe/ZnO/SPCE sensor has been verified with real sample analysis using commercial antipsychotic CPZ tablets and human urine samples, and adequate recovery has been achieved.

Reduced graphene oxide/macrocyclic iron complex hybrid materials as counter electrodes for dye-sensitized solar cells.

A novel series of reduced graphene oxide (RGO)/macrocyclic iron (Fe) complex hybrid materials were synthesized and then used in the production of counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). The electrode properties of various CEs were comprehensively analyzed using scanning electron microscopy, transmission electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, energy dispersive spectroscopy, Raman spectroscopy, X-ray diffraction, and cyclic voltammetry analyses. DSSCs, based on various CEs, were characterized using current density-voltage, incident monochromatic photon-to-current conversion efficiency, and electrochemical impedance spectroscopy measurements. DSSCs fabricated using the RGO/macrocyclic Fe nanocomposite CEs yielded an efficiency of 6.75%. The RGO/Fe CEs exhibited efficient electrocatalytic capability because catalytic Fe particles were uniformly distributed on the surface of RGO. The results indicated that a DSSC with a RGO/Fe CE can exhibit an efficiency comparable to that of a platinum (Pt) CE DSSC and can therefore replace conventional Pt CE DSSCs to lower the cost of solar cells.

Compatibility enhancement of polyimide-silica hybrid sol-gel materials without incorporation of silane-coupling agent.

A facile route has been developed to enhance compatibility between organic polyimide matrix and dispersed phase of inorganic silica particles without addition of conventional silane-coupling agent. The as-prepared hybrid sol-gel materials having reduced size of SiO2 particle dispersed in polyimide matrix were successfully synthesized through pre-catalyzed sol-gel route using an organic diamine base. The PI-silica hybrid materials through conventional polyamic acid-catalyzed sol-gel route with/without silane-coupling agent were also prepared for comparative control studies. Morphological feature of as-prepared sol-gel materials prepared from three different approaches was also compared based on the studies of transmission electron microscopy. Effects of the material composition, in three different catalyzed routes, were investigated by thermal stability, mechanical strength, optical clarity, gas barrier and water absorption measurements of polyimide and a series of polyimide-silica hybrid sol-gel materials, respectively.

Comparative electrochemical studies at different operational temperatures for the effect of nanoclay platelets on the anticorrosion efficiency of organo-soluble polyimide/clay nanocomposite coatings.

A organic soluble polyimide (SPI) prepared from 4,4'-Oxydianiline and 4,4'-(4,4'-Isopropylidenediphenoxy)bis(phthalic anhydride) was mixed with organo-modified montmorillonite (MMT) in N,N-Dimethylacetamide. The organic soluble polyimide-clay nanocomposite (PCN) materials were characterized by Fourier-Transformation infrared (FTIR), spectroscopy, wide-angle X-ray diffraction (WAXRD) patterns and transmission electron microscopy (TEM). It should be noted that the nanocomposite coating containing 3 wt% of clay loading was found to exhibit an observable enhanced corrosion protection on cold-rolled stell (CRS) electrode at higher operational temperature of 50 degrees C, which was even better than that of uncoated and electrode-coated with SPI alone at room temperature of 30 degrees C based on the electrochemical parameter evaluations. In this work, all electrochemical measurements were performed at a double-wall jacketed cell, covered with a glass plate, through which water was circulated from a thermostat to maintain a constant operational temperature of 30, 40 and 50 +/- 0.5 degrees C. Moreover, a series of electrochemical parameters shown in Tafel, Nyquist and Bode plots were all used to evaluate PCN coatings at three different operational temperatures in 5 wt% aqueous NaCl electrolyte. The molecular barrier properties at three different operational temperatures of SPI and PCN membranes were investigated by gas permeability analyzer (GPA) and vapor permeability analyzer (VPA).

Effect of amino-modified silica nanoparticles on the corrosion protection properties of epoxy resin-silica hybrid materials.

In this paper, a series of organic-inorganic hybrid materials consisting of epoxy resin frameworks and dispersed nanoparticles of amino-modified silica (AMS) were successfully prepared. First of all, the AMS nanoparticles were synthesized by carrying out the conventional acid-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) in the presence of (3-aminopropyl)-trimethoxysilane (APTES) molecules. The as-prepared AMS nanoparticles were then characterized by FTIR, 13C-NMR and 29Si-NMR spectroscopy. Subsequently, a series of hybrid materials were prepared by performing in-situ thermal ring-opening polymerization reactions of epoxy resin in the presence of as-prepared AMS nanoparticles and raw silica (RS) particles. The as-prepared epoxy-silica hybrid materials with AMS nanoparticles were found to show better dispersion capability than that of RS particles existed in hybrid materials based on the morphological observation of transmission electron microscopy (TEM). The hybrid materials containing AMS nanoparticles in the form of coating on cold-rolled steel (CRS) were found to be much superior in corrosion protection over those of hybrid materials with RS particles when tested by a series of electrochemical measurements of potentiodynamic and impedance spectroscopy in 5 wt% aqueous NaCI electrolyte. The increase of corrosion protection effect of hybrid coatings may have probably resulted from the enhancement of the adhesion strength of the hybrid coatings on CRS coupons, which may be attributed to the formation of Fe-O-Si covalent bond at the interface of coating/CRS system based on the FTIR-RAS (reflection absorption spectroscopy) studies. The better dispersion capability of AMS nanoparticles in hybrid materials were found to lead more effectively enhanced molecular barrier property, mechanical strength, surface hydrophobicity and optical clarity as compared to that of RS particles, in the form of coating and membrane, based on the measurements of molecular permeability analysis, dynamic mechanical analysis, contact angle measurements and ultraviolet-visible transmission spectra, respectively.