Treatment of colorectal cancer by anticancer and antibacterial effects of hemiprotonic phenanthroline-phenanthroline+ with nanomicelle delivery.

Colorectal cancer (CRC) is a common digestive tract tumor worldwide. Specific microorganisms, including Fusobacterium nucleatum (F. nucleatum) and Escherichia coli (E. coli), are abundant in colonic mucosa and can promote the cancer progression and malignancy. Therefore, a therapeutic strategy is proposed to deliver effective drugs to colorectum for both anticancer and antibacteria. Here we used thin-film dispersion method to encapsulate hemiprotonic phenanthroline-phenanthroline+ (ph-ph+) into nanomicelle. The results showed that the drug-loading nanomicelle had good dispersion, and the particle size was about 28 nm. In vitro assay indicated that the nanomicelle was active against CRC-related obligate and facultative anaerobes. In human CRC cells, the nanomicelle could effectively inhibit cell proliferation and induce apoptosis. In vivo distribution showed that the nanomicelle could release ph-ph+ mainly in the colorectum. In CRC model mice, the nanomicelle significantly reduced tumor number and volume, and decreased the bacteria load and colorectal inflammation. Together, the study identifies that the ph-ph+nanomicelle has the potential to apply in treating CRC, and also suggests that anticancer combined with antimicrobial therapy would be a feasible way for CRC therapy.

Gene sdaB Is Involved in the Nematocidal Activity of Enterobacter ludwigii AA4 Against the Pine Wood Nematode Bursaphelenchus xylophilus.

Bursaphelenchus xylophilus, a plant parasitic nematode, is the causal agent of pine wilt, a devastating forest tree disease. Essentially, no efficient methods for controlling B. xylophilus and pine wilt disease have yet been developed. Enterobacter ludwigii AA4, isolated from the root of maize, has powerful nematocidal activity against B. xylophilus in a new in vitro dye exclusion test. The corrected mortality of the B. xylophilus treated by E. ludwigii AA4 or its cell extract reached 98.3 and 98.6%, respectively. Morphological changes in B. xylophilus treated with a cell extract from strain AA4 suggested that the death of B. xylophilus might be caused by an increased number of vacuoles in non-apoptotic cell death and the damage to tissues of the nematodes. In a greenhouse test, the disease index of the seedlings of Scots pine (Pinus sylvestris) treated with the cells of strain AA4 plus B. xylophilus or those treated by AA4 cell extract plus B. xylophilus was 38.2 and 30.3, respectively, was significantly lower than 92.5 in the control plants treated with distilled water and B. xylophilus. We created a sdaB gene knockout in strain AA4 by deleting the gene that was putatively encoding the beta-subunit of L-serine dehydratase through Red homologous recombination. The nematocidal and disease-suppressing activities of the knockout strain were remarkably impaired. Finally, we revealed a robust colonization of P. sylvestris seedling needles by E. ludwigii AA4, which is supposed to contribute to the disease-controlling efficacy of strain AA4. Therefore, E. ludwigii AA4 has significant potential to serve as an agent for the biological control of pine wilt disease caused by B. xylophilus.

Microbial Interactions Within Multiple-Strain Biological Control Agents Impact Soil-Borne Plant Disease.

Major losses of crop yield and quality caused by soil-borne plant diseases have long threatened the ecology and economy of agriculture and forestry. Biological control using beneficial microorganisms has become more popular for management of soil-borne pathogens as an environmentally friendly method for protecting plants. Two major barriers limiting the disease-suppressive functions of biocontrol microbes are inadequate colonization of hosts and inefficient inhibition of soil-borne pathogen growth, due to biotic and abiotic factors acting in complex rhizosphere environments. Use of a consortium of microbial strains with disease inhibitory activity may improve the biocontrol efficacy of the disease-inhibiting microbes. The mechanisms of biological control are not fully understood. In this review, we focus on bacterial and fungal biocontrol agents to summarize the current state of the use of single strain and multi-strain biological control consortia in the management of soil-borne diseases. We discuss potential mechanisms used by microbial components to improve the disease suppressing efficacy. We emphasize the interaction-related factors to be considered when constructing multiple-strain biological control consortia and propose a workflow for assembling them by applying a reductionist synthetic community approach.

Vertical Stratification Engineering for Organic Bulk-Heterojunction Devices.

High-efficiency organic solar cells (OSCs) can be produced through optimization of component molecular design, coupled with interfacial engineering and control of active layer morphology. However, vertical stratification of the bulk-heterojunction (BHJ), a spontaneous activity that occurs during the drying process, remains an intricate problem yet to be solved. Routes toward regulating the vertical separation profile and evaluating the effects on the final device should be explored to further enhance the performance of OSCs. Herein, we establish a connection between the material surface energy, absorption, and vertical stratification, which can then be linked to photovoltaic conversion characteristics. Through assessing the performance of temporary, artificial vertically stratified layers created by the sequential casting of the individual components to form a multilayered structure, optimal vertical stratification can be achieved. Adjusting the surface energy offset between the substrate results in donor and acceptor stabilization of that stratified layer. Further, a trade-off between the photocurrent generated in the visible region and the amount of donor or acceptor in close proximity to the electrode was observed. Modification of the substrate surface energy was achieved using self-assembled small molecules (SASM), which, in turn, directly impacted the polymer donor to acceptor ratio at the interface. Using three different donor polymers in conjunction with two alternative acceptors in an inverted organic solar cell architecture, the concentration of polymer donor molecules at the ITO (indium tin oxide)/BHJ interface could be increased relative to the acceptor. Appropriate selection of SASM facilitated a synchronized enhancement in external quantum efficiency and power conversion efficiencies over 10.5%.

Aqueous Processing for Printed Organic Electronics: Conjugated Polymers with Multistage Cleavable Side Chains.

The ability to process conjugated polymers via aqueous solution is highly advantageous for reducing the costs and environmental hazards of large scale roll-to-roll processing of organic electronics. However, maintaining competitive electronic properties while achieving aqueous solubility is difficult for several reasons: (1) Materials with polar functional groups that provide aqueous solubility can be difficult to purify and characterize, (2) many traditional coupling and polymerization reactions cannot be performed in aqueous solution, and (3) ionic groups, though useful for obtaining aqueous solubility, can lead to a loss of solid-state order, as well as a screening of any applied bias. As an alternative, we report a multistage cleavable side chain method that combines desirable aqueous processing attributes without sacrificing semiconducting capabilities. Through the attachment of cleavable side chains, conjugated polymers have for the first time been synthesized, characterized, and purified in organic solvents, converted to a water-soluble form for aqueous processing, and brought through a final treatment to cleave the polymer side chains and leave behind the desired electronic material as a solvent-resistant film. Specifically, we demonstrate an organic soluble polythiophene that is converted to an aqueous soluble polyelectrolyte via hydrolysis. After blade coating from an aqueous solution, UV irradiation is used to cleave the polymer's side chains, resulting in a solvent-resistant, electroactive polymer thin film. In application, this process results in aqueous printed materials with utility for solid-state charge transport in organic field effect transistors (OFETs), along with red to colorless electrochromism in ionic media for color changing displays, demonstrating its potential as a universal method for aqueous printing in organic electronics.

Conjugated Polymer Alignment: Synergisms Derived from Microfluidic Shear Design and UV Irradiation.

Solution shearing has attracted great interest for the fabrication of robust and reliable, high performance organic electronic devices, owing to applicability of the method to large area and continuous fabrication, as well as its propensity to enhance semiconductor charge transport characteristics. To date, effects of the design of the blade shear features (especially the microfluidic shear design) and the prospect of synergistically combining the shear approach with an alternate process strategy have not been investigated. Here, a generic thin film fabrication concept that enhanced conjugated polymer intermolecular alignment and aggregation, improved orientation (both nanoscale and long-range), and narrowed the π-π stacking distance is demonstrated for the first time. The impact of the design of shearing blade microfluidic channels and synergistic effects of fluid shearing design with concomitant irradiation strategies were demonstrated, enabling fabrication of polymer-based devices with requisite morphologies for a range of applications.

Effect of host-guest interactions on the cloud points of neutral thermosensitive homopolymers: poly(N-n-propylmethacrylamide) and polymers with similar structures.

We investigated effect of cyclodextrins (CDs) on the cloud point of several thermosensitive polymers that are not ionizable. α-CD increased the cloud point of the poly(N-n-propylmethacrylamide) (PnPMAm) aqueous solution; by contrast, ß-CD or γ-CD did not affect the cloud point of the PnPMAm solution. The cloud point of the PnPMAm solution increased gradually with an increase in the concentration of α-CD. Furthermore, we compared the effect of the CDs on the cloud points of four polymers with similar structures. As for poly(N-isopropylacrylamide) (PiPAAm), neither α-CD nor ß-CD affected its cloud point. On the basis of the effect of the differently sized CDs on the cloud point of five polymers and the corresponding NOESY NMR data, we inferred that steric hindrance by the main chain of PiPAAm might be responsible for the bulky CD being unable to form a complex with the short isopropyl group.

Kinetic studies of oxygen atom transfer reactions from trans-dioxoruthenium(VI) porphyrins to sulfides.

The kinetics of the reactions of three trans-dioxoruthenium(VI) porphyrin derivatives with organic sulfides were measured. The dioxo systems studied were 5,10,15,20-tetramesityl porphyrin-dioxoruthenium(VI) (2a), 5,10,15,20-tetraphenylporphyrin-dioxoruthenium(VI) (2b), and 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin-dioxoruthenium(VI) (2c). Species 2 were competent oxidants and reacted rapidly with thioanisoles to generate the corresponding sulfoxides. Typical second-order rate constants determined from pseudo-first-order kinetic studies for sulfoxidation reactions are 8-60 M(-1)s(-1), which are 3 orders of magnitude larger in comparison with those of well studied alkene epoxidations and activated C-H bond oxidations by the same dioxo species. For a given sulfide substrate, the reactivity order for the dioxoruthenium(VI) species was 2a<2b<2c, which is in agreement with expectation on the basis of the electron-withdrawing and steric effects of the porphyrin macrocycles. Various para-substituted thioanisoles react in a narrow kinetic range with the same dioxo species. The kinetic results obtained in this study indicate a concerted oxygen atom transfer and/or electron transfer followed by oxygen transfer mechanism from oxidant to sulfide. Competition kinetic reactions with a catalytic amount of porphyrin ruthenium(II) species and a terminal oxidant give relative rate constants for sulfoxidations of competing substrates that are somewhat smaller than the ratios of absolute rate constants, implying a multiple oxidant model for sulfoxidation reactions.